How do I configure 128 channels of DIO and 128 channels of Analog output with the availability of 3 pci slots

I have only 3 slots of PCI or 4 slots of ISA bus, I want to configure with the minimum possible modules to attain 128 channels of DIO and 128 channels of analog output. This is inturn fed to the PCM (Pulse code Modulator). The cards will be placed in industrial PC.

Associate Engineer-Marketing,
Using just those 3 PCI slots you're not going to be able to get the 128 analog output channels. You will probably want to go either the MXI-3 (PCI bus extender) to a PXI chassis or E Series DAQ card to a SCXI chassis for such a high channel count system. Which analog output cards and which digital I/O cards you will want depends on your application. You will have to decide whether you will need static or dynamic analog output as well as whether you need clocked digital I/O or not. I highly recommend contacting our internal sales department at 1-800-433-3488. They are great at helping specify systems.
Ames
Applications Engineering
National Instruments

Similar Messages

I installed my new Apple TV and successfully completed the configuration (Wireless network, Apple ID, and others) yet I am always in the Computers and Setting page- can't move to the main page – any idea on what and how, please?

Hello, I installed my new Apple TV and successfully completed the configuration (Wireless network, Apple ID, and others) yet I am always in the Computers and Setting page… can’t move to the main page – any idea on what and how, please?

Welcome to the Apple Community.
Unfortunately, a number of users appear to have encountered this problem. Some of these users have reported that the problem just disappears the following day or shortly after. Other users have found various other solutions to this problem.
Firstly, are you receiving any date and time errors when you turn on your Apple TV?
Check that you are properly connected to the Internet, by ensuring that you have a proper IP address and not one starting with 169. Also check that your location for the iTunes Store is set correctly, if so you might try changing it and then changing it back.
If the problem persists try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general. You should also try restarting your router, or if this doesn't work you might like to try a restore.

Can I use two FP-AO-210's and one FP-1000 to obtain 16 channels of analog output?

Hello All,
I'm new to both Fieldpoint and LabVIEW.
I'm developing a control system that requires at least 9 channels of analog-only output. I have been trying to connect two FP-AO-210's to a single FP-1000 by connecting one FP-AO-210 directly to the FP-1000, and the second FP-AO-210 to the first FP-AO-210. However, Fieldpoint Explorer only detects the network interface and the first analog output module.
Is this configuration correct? Or, do I need a FP-1001 in order to use a second FP-AO-210?
Does anyone have any alternate suggestions on how to obtain at least 9 channels of analog output?
Thanks,
Eric W

Eric,
One FP-1000 (or FP-1001/160X/20XX) can control up to 9 IO modules. If the second FP-AO-210 is not being detected by FieldPoint Explorer there are a couple things to check. First check to make sure that all of the terminal bases and modules are firmly connected to each other.
Next, check the Power & Ready LED of the FP-AO-210 at address 2. Both LEDs should be lit. If they are not, de-power the system, remove the modules and terminal bases and make sure that you do not have any bent pins. Re-assemble and power up the system. Use FieldPoint Explorer again.
If the module is still not detected, take a look at the addressing of the detected modules. The system should be detecting the first FP-AO-210 at address 1 (or 1 + a multiple of 10 if you have s
et the FP-1000 to a different address). If the FP-AO-210 is at a different address, then it is likely a problem with the addressing circuitry either in the network module or the terminal base. Try swapping the positions of the two terminal bases and try again. If it works, then the error is in the addressing circuitry of the terminal base, if not, then it is in the addressing circuitry of the network module. Note: bent pins can also cause this.
Regards,
Aaron

How to synchronize two analog output with USB-6353 sharing a trigger

I'm have the need to synchronize two analog output on the same device (USB 6353) sharing a trigger signal on PFI0.
The programming environement is Visual C++ , and the code I wrote is as following:
DAQmxCreateTask ("", &Ao0TaskHandle); // is the task handle for the analog output Ao0
DAQmxCreateVoltageChan((Ao0taskHandle,"Dev1/Ao0","",-5.0,5.0,DAQmx_Val_Volts,NULL);
DAQmxCfgSampClkTiming(Ao0taskHandle,5000.0,DAQmx_Val_Rising,DAQmx_Val_ContSamps,1000);
DAQmxCfgDigEdgeStartTrig(Ao0taskHandle,"/Dev1/PFI0",DAQmx_Val_Rising);
DAQmxCreateTask ("", &Ao1TaskHandle); // is the task handle for the analog output Ao1
DAQmxCreateVoltageChan((Ao1taskHandle,"Dev1/Ao1","",-5.0,5.0,DAQmx_Val_Volts,NULL);
DAQmxCfgSampClkTiming(Ao1taskHandle,5000.0,DAQmx_Val_Rising,DAQmx_Val_ContSamps,1000);
DAQmxCfgDigEdgeStartTrig(Ao1taskHandle,"/Dev1/PFI0",DAQmx_Val_Rising);
DAQmxWriteAnalgF64(Ao0taskHandle,1000,FALSE,10.0,DAQmx_Val_GroupByChannel,AOdata,NULL,NULL); AOdata is a buffer containing a sinwave
DAQmxWriteAnalgF64(Ao1taskHandle,1000,FALSE,10.0,DAQmx_Val_GroupByChannel,AOdata,NULL,NULL);
DAQmxStartTask(Ao0taskHandle);
DAQmxStartTask(Ao1taskHandle);
What happen as result of the code is that only the Ao0 channel get the sinwave output , but not the Ao1 . It seems the two channels are not synchronized.
What is wrong in my code?
Please any help non referred to a LabView soloution , first because I'm not a LavView programmder and secondly the project impose C++ as the unique environement.
Thanks
Enky

It will depend on what you are programming the NI 5112 device with.
If you are using LabVIEW, you can use the example program attached below. In it, it will show you how this is done.
If you are using VB, VC++ or CVI, you can look at one of the NI 5112 shipping examples that are installed on your computer. These are located in the VXIPNP folder. For example, the VC++ example would be located here:
C:\VXIpnp\WinNT\NISCOPE\Examples\c\MStudioC++\5112Sync
These examples will show you how to synchronize the two digitizers.
Let me know if you have any questions about these examples.
Brian
Attachments:
Multiple_NI_PXI-5112_Synchronization_Demo.llb ‏151 KB

I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings?

I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings? Please help. Thanks.

You should have asked this before you tried: Changing username or short name- User Account and Short Name- OS X- How to change user account name or home directory name.

I have and iPad and I have and iPhone 5 my husband has another one and I singed all of them with the same Apple ID and accound now my husband can see all the text I send and I get everything he gets how could I get his phone out of my accound

I have and iPad and I have and iPhone 5 my husband has another one and I singed all of them with the same Apple ID and accound now my husband can see all the text I send and I get everything he gets how could I get his phone out of my accound

Mishijos3 wrote:
I have and iPad and I have and iPhone 5 my husband has another one and I singed all of them with the same Apple ID ...
Have a look here...
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

My i phone got stolen and i got a new one with the same number but how do i synch it up with my old contacts? i thought i could do from ituned but it hasnt worked!!

hello,
my i phone got stolen and i got a new one with the same number, but i cant get it to synch up with my itunes to make it like my old phone! can you please tell me how i do this. i need all my contacts and content etc etc.

Plug it into iTunes and tell iTunes what to sync to the device.

How can i view multiple windows in safari? I used to do it with the 3 finger sliding, but that feature is gine now. please help

how can i view multiple windows in safari? I used to do it with the 3 finger sliding, but that feature is gine now. please help

Try a 2 finger Pinch to see the tabs.

How do I connect my 2nd generation Ipod to a Firewire 800 port? It no longer holds a charge and it doesn't power up with the newer generation USB cable. The only way I can sync my Itunes library onto this Ipod is when it is powered...

How do I connect my 2nd generation Ipod to a Firewire 800 port on a new laptop? It no longer holds a charge and it doesn't power up with the newer generation USB cable. The only way I can sync my Itunes library onto this Ipod is when it is powered and connected simultaneously. Pls help.

Try here:
iOS: Not responding or does not turn on
If not successful then time for an appointment at the Genius Bar of an Apple store.

HT204380 My iPhone and iPad are set up under the same account and when I try to FaceTime with the iPad or vice versa it says face time is busy and will not connect, how do I fix this

My iPhone and iPad are set up under the same account and when I try to FaceTime with the iPad or vice versa it says face time is busy and will not connect, how do I fix this

I can call my ipad with my iphone alll the time. That's how I check up on my kids at home when I"m at work. You just set up to your iphone's facetime setting with your phone number and set up your ipad's facetime settings with your apple id (in this case it's your email)

Hi! I just bought Lion and I am having a problem with the installation. It keeps telling me that the computer's hard drive has a S.M.A.R.T. problem. How can I solve it?problem.

Hi! I just bought Lion and I am having a problem with the installation. It keeps telling me that the computer's hard drive has a S.M.A.R.T. problem. How can I solve it?
Thanks!
Angela

You may have a hard drive problem. When I installed Lion, the installer told me that it couldn't complete because the hard drive was failing (or broken, the exact words escape me). Since the HD had been functioning just fine, I took it to the Genius Bar, and found out that yes, the hard drive was slowly dying (bad sectors). I couldn't reboot into Snow Leopard, the installer wouldn't let me and then the drive just wouldn't work at all.
I had to replace my drive and restore from Time Machine. Thankfully, I had Time Machine, and had just done a backup 5 minutes before the crash.
Best of luck.

How to distribute my windows phone 8 app and windows store app without publishing in the store

How to distribute my windows phone 8 app and windows store app without publishing in the store
any business license or enterprise license needed..
I am a windows developer talking behalf of my company i.e wipro
I have a question about the enterprise license and we are building an app for the limited users i.e our company employees and users and we do not want to publish in the store
How to release the app?
what are licenses etc needed?

Hi,
for developers distributing apps without Publishing in the Store, the sideloding Enterprise key license through volume licensing is required.
Starting May 1, 2014, customers who want to enable sideloading will be able to purchase an Enterprise Sideloading key for $100 through the Open License program.
An unlimited number of devices can be enabled for sideloading using this key.
thanks
diramoh

How to Setup Forward Error Handling in PI Scenarios. Can you help me with the same with screen shots if possible?

Dear all
How to Setup Forward Error Handling in PI Scenarios. Can you help me with the same with screen shots if possible?
Thanks
Regards
karan

Hello
These are the following errors
1. Trace level="1" type="T">no interface action for sender or receiver found</Trace>
2. <Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!
3.
<Trace level="1" type="T">Application Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</
Trace level="3" type="T">No persisting of message after plsrv call, because of config</Trace>Trace level="3" type="T">Error of the prevous version:</TraceTrace level="3" type="T">Error ID APPLICATION_ERROR</Trace>
tThere are repeating errors also.
TThanks
Regards
kkaran

How do I save a PDF ready for print. I have a problem with the fonts. The fonts are blurry after pri

How do I save a PDF ready for print. I have a problem with the fonts. The fonts are blurry after printing. There is a trick in saving PDF.

Hi el_giclee,
Important to note from the beginning is that when you create your Photoshop document make sure you chose 300 Pixels/inch as your resolution.
I'm interested in seeing your Save Adobe PDF dialog box after you choose to save the PDF.
Could you post a screenshot of this dialog box with the Compression menu selected on the left side?
It's a good idea to select High Quality Print or Press Quality in the Adobe PDF Preset menu at the top of this box. It will automatically select the best default settings for a printed piece.
Michael

How do i take a playlist from my itunes, and put it onto my ipod with the newest itunes?

How do i take a playlist from my itunes, and put it onto my ipod with the new itunes?

For music that you've purchased from Apple that are on your iPhone you should be able to copy to your computer's iTunes via File > Transfer Purchases. Also if you are in the US then you should be able to re-download past music purchases for free : http://support.apple.com/kb/HT2519
For your own music that you've copied, then if you haven't got a backup on, for example, external drives or CDs/DVDs then you could see if any of the utilities mentioned in this old post still exist and work

How do I configure 128 channels of DIO and 128 channels of Analog output with the availabili​ty of 3 pci slots

Similar Messages

Maybe you are looking for

How do I configure 128 channels of DIO and 128 channels of Analog output with the availability of 3 pci slots