How do I create a live copy of a table in Numbers?

I'm not even sure how to word this question, which is why I've had a hard time searching for it.
I'm working on a spreadsheet that has 265 rows on it. In the future, we will probably be adding to those rows. I need to have that exact same information duplicated onto another sheet in the same document, so if I add a column to Table A, it's also added automatically to Table B.
Is this possible?

Say you have Table A and Table B. If you add a column to Table A, there's no way that I know of for a column also to be added automatically to Table B's structure. But you can add the extra column to Table B manually too and then have the contents of that new column update automatically when you change the contents in the corresponding new column in A. Is that what you want?
To do that you could put simple formulas in the "receiving" table B that refer to table A. In a cell in table B type =, hop over to the source table A, select the source cell you want, and hit return.
Then, if the two tables have the same structure, you can take the formula in table B and fill down or right to pull other values from table A. If they have a different structure, you would insert the formula cell by cell.
Using AppleScript with the old Numbers there are ways to "push" data from one table to another and even, I think, create new tables and columns and fill them with values. But the new Numbers 3.0 does not support AppleScript.
SG

Similar Messages

Somehow I created a live copy of "Finder" on my desktop. It is titled "iPhoto Library", and has live copies of all of my files/photos/music. How can I make it go away without deleting all of my content?

Somehow I created a live copy of "Finder" on my desktop. It is titled "iPhoto Library", and has live copies of all of my files/photos/music. How can I make it go away without deleting all of my content?

Either you moved or copied your iPhoto library folder to the Desktop.
Quit iPhoto. Rename the folder on your Desktop to something else, such as "foo." Launch iPhoto. If you still see all your photos, you can delete "foo."
If you don't see your photos, quit iPhoto, rename "foo" to "iPhoto Library," and put it in your Pictures folder. Try iPhoto again.

How do I create multiple live USBs of Operating systems to boot from on one flashdrive?

How do I create multiple live USBs of Operating systems to boot from on one flashdrive?
I am attempting to create multiple live USBs within one flashdrive so that i can boot various operating systems without having to buy multiple USb sticks. I am using a Mac OS X Snow Leopard 10.6.8 Operating System currently. I am using the Terminal provided by the OS.
I would like to try Debian, Kali, Precise Puppy, and Sabayon- with one space left empty for whatever Linux OS I would like to try next. I have partitioned an 8GB flashdrive into the following sections:
name of intended OS,     space allocated for it:
1)Debian ........................1.32 GB
2)Kali..............................2.61GB
3)Precise Puppy..............163.7MB
4)Sabayon.......................1.77GB
5)TBD..............................2.14GB
I have figured out how to change the .iso files of the operating systems into .img files with the following commands:
hdiutil convert -format UDRW /path/to/input.iso -o /path/to/output.img
a .img.dmg file is created, this is corrected in the next line of code *please note: I am a a very beginner at programming, and would greatly appreciate any help. Thank you!
mv /path/to/output/file.img{.dmg,}
This is where I started to get confused:
I entered diskutil list to find the location of the partitions on my flashdrive, and this is the relevant section:
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *8.0 GB     disk1
   1:                 DOS_FAT_32 DEBIAN               1.3 GB     disk1s1
   2:                 DOS_FAT_32 KALI                    2.6 GB     disk1s2
   3:                 DOS_FAT_32 PRECISE            163.7 MB   disk1s3
   4:                 DOS_FAT_32 SABAYON           1.8 GB     disk1s5
   5:                 DOS_FAT_32 TBD                     2.1 GB     disk1s6
This is the code I attempted to use and the subsequent result:
charles-burtons-mac-mini:~ charlesburton$ sudo dd if=/Users/charlesburton/Desktop/debian-live-7.2-i386-gnome-desktop.img of=/dev/disk1s1 bs=1m
dd: /dev/disk1s1: Resource busy
*at this point I went to the Disk Utility GUi and unmounted only the DEBIAN partition, now back to the terminal*
charles-burtons-mac-mini:~ charlesburton$ sudo dd if=/Users/charlesburton/Desktop/debian-live-7.2-i386-gnome-desktop.img of=/dev/disk1s1 bs=1m
dd: /dev/disk1s1: end of device
1259+0 records in
1258+1 records out
1320005632 bytes transferred in 1011.966891 secs (1304396 bytes/sec)
Please may someone help explain why I had a return value of +1 in my records in and how I can make it work properly.

I would like to know the answer to this as well. I tried renaming the 3D version by adding 3D after it, but it still not a separate movie in iTunes.
It's putting them in the same folder.

How can I create a live video with my mac mini?

I have a new mac mini and a logitech webcam, ilife 2011, even a professional external mike, if necessary. How can I create a live video to upload to YouTube and the like?

If you're talking about LIVE video (as in, people can see what you're doing RIGHT NOW), you can't host that on Youtube (yet), although there are applications (not part of iLife, though) to let you stream to a personal website. If you just want to record yourself, then upload it, sure, you can do so using iMovie 11.
This page explains iMovie's iSight import feature - provided your webcam is supported, the same should work for you.
Matt

How can I create a live hyperlink through PPT / PDF?

1. I create a PPT with a "live" hyperlink - www.apple.com
2. I test the hyperlink in PPT - no issues.
3. I save the PPT as a PDF.
4. I email the PDF to myself.
5. The hyperlink is now dead.
6. How do I create a "live hyperlink", through PDF, that I can access via my iPAD?
THANK YOU!!!

If you're talking about LIVE video (as in, people can see what you're doing RIGHT NOW), you can't host that on Youtube (yet), although there are applications (not part of iLife, though) to let you stream to a personal website. If you just want to record yourself, then upload it, sure, you can do so using iMovie 11.
This page explains iMovie's iSight import feature - provided your webcam is supported, the same should work for you.
Matt

Certain Numbers templets allow you to drag and drop contacts to populate cell data, how can I create that functionality in my own tables?

Certain Numbers templets allow you to drag and drop contacts to populate cell data, how can I create that functionality in my own tables?

If you haven't come across the workarounds thread you may find helpful tips there on this and other ways to work with Numbers 3.
ronniefromcalifornia discovered how to bring contacts into Numbers 3. As described in this post:
"Open Contacts
Select all the cards you want
Copy
In Numbers, in a table, select cell A1
Paste
Boom. Works great. Even brought in the pictures. Cool."
So instead of drag and drop, just select in Contacts, copy, and paste into Numbers
SG

How do i create "Save As" option to file menu in Numbers version 2.3 (554). I have done this previously but cant remember how its done. My OS is 10.9.3

How do i create "Save As" option to file menu in Numbers version 2.3 (554). I have done this previously but cant remember how its done. My OS is 10.9.3

You can follow the steps in this article on TUAW to change the five-key shortcut for Save As… to the old tthree-key shortcut.

How do I create an un-copy-able file/folder/drive?

Hello thanks in advance for help.
I'm trying to prepare a thumb drive with confidential financial information. I only want to see the information off the drive, but I don't want it to be copied or stolen from it.
How can I create a thumb drive that is read only, a folder that is read only, or make my files on the drive read only?
Do I have to make those changes after the files are on the device?
Or, better said, how can I create a file/folder that I can copy TO a drive, but not FROM that drive.
Thanks

Hi, and welcome to the forums.
There is no 100% secure data. None. If the CIA or NSA wants it, they'll get it.
In the real world, you might be better off using Disk Utility (in your Applications/Utilities folder) to create an encrypted +Disk Image+ or +Sparse Bundle Disk Image.+ Give it a good password and put your sensitive files in it.
Then anybody who gets the drive will have to know the password or find another way to decrypt it. Short of somebody like the CIA or NSA, that's pretty unlikely.

How can you create a virtual copy in a Lightroom plugin?

I looked over the Lightroom SDK and did not see any documentation on creating a virtual copy. Is there an undocumented API for this?
If not, is there a plan to add this into the SDK?

Hi Matt,
Yeah, I have some good news and some bad news:
- Good news: Keyboard stuffing (as implemented in the elare framework) works equally well on both platforms, provided the appropriate keystroke exists on both platforms.
(Mac version uses applescript, Windows uses autohotkey - both assure Lightroom is the target) - Note: @2011-07-30, I haven't actually tested this particular function on Mac - but I've tested other similar functions on both platforms.
- Bad news: It doesn't always work on either platform, since keystrokes may be usurped by open dialog boxes and open text fields in Lightroom...
- Good news: failure is 100% detectable.
Bottom line:
If the kludgy nature of this solution would be more bad than good for you and/or your users, then this is not a viable solution.
If your users would prefer the caveats in order to be able to get the job, then this solution will work well enough for now.
PS - I'm presently using it in ChangeManager and its a godsend for me. Since I understand the limitations, my failure rate is appx. 0%.
~R

How do I create a vertical gradient in a table, not with an object?

How do I create a vertical gradient effect for alternating rows in a table?
I'm trying to get my table cells to alternate and look like this:
Thanks,
freecondomap

Hi, BTJT:
We are starting work on a large catalog project where we will need to change the gradient fill to -90 on every other row in the table - excluding the header, footer and first row of each table.
How would you adjust the script you mentioned above to do this? and would the script work in Indesign CS5.5 versus Indesign CS6
It does get a bit more complicated. Not super-complicated, but not as simple.
The above idiom only works for all the rows in a table. If you want to do any specific subset, then you need to use a loop.
But is it necessary that you change the gradient angle on every other row? Isn't it sufficient to set the gradient angle on all rows, and then apply the alternating gradient on alternate rows using the the alternating fills feature, as suggested by Jeffrey?
I guess you also want to apply to...all the tables in your document? That would then be:
app.activeDocument.stories.everyItem().tables.everyItem().cells.everyItem().gradientFillAngle=-90;
Unless you need to be more selective? But I don't think you do?

How do you create Text Hover States - inDesign cs5 table of contents?

I cannot figure out how to create text hover states in the table of contents. I want it to act like a hyperlink on websites where you hover over a link and it changes color. Any ideas?

Hello,
This forum is for questions about Adobe FormsCentral (http://formscentral.adobe.com). Please re-post your question to the InDesign forum:
http://forums.adobe.com/community/indesign
Best of luck!
Rebecca

How to use create, delete, modify butttons in a table

hi all
in my application i have emp table in my source view
in that table i have inserted static data in columns i.e., empid, empname. i have 3 buttons create, delete, modify buttons in that table. when i press Create button it navigates to another view1 in which we have a emp form with create new emp button and labels empid, empname and 2 input fields.After filling the form when hit the create newemp button the form data should be displayed in the table.
The same for Modify and delete. i.e., when i select a particular empid row in my source view table and hit the modify button it should navigate to view2 in which the particular record form with data displays and after making necessary modifications the modified data should be display in the particular row .
For delete button, when i select a particular record in the table and hit delete button it should be deleted from the table.
any snippet of code is valuable
Thanks in advance
sravan

Hi Sravan,
I just need a clarification, are you getting the table data from the back-end system?
On the second view, after the user input on click of the "Create New" or "Modify" button, update the back-end. Once the update is successful, fire a plug back to the first view and reload the table or execute the model again. The updated records will be fetched from back-end system.
On click of "Delete" button, remove the record from the back-end and execute the model again.
This holds good if you have the data fetched from the back-end.
Regards,
Santhosh.C

How do I create a live tracing?

I have a freehand rendering that I need to get into a workable illustrator format. What format do I save it in when scanned, and how do I engage live tracing so that I can play with the resulting graphic or create that graphic?

Illustrator can work with tif, jpeg, psd among some other formats. Don't make the file too big. Illy pops up a warning when it's bigger than 1500 Pixels anyway
First I would try and lighten the background in Photoshop so it's white and delete the dark spots in the edges of the scan.
In Illy you don't just hit the trace button, but click on the little arrow on the right that leads you to the tracing options. Do you want to trace colored or Black and white?
For black and white traces you can choose between fills and strokes. If you want to capture the drawing gestus, fills will be suitable. If you like to achieve exactly tha same line weight for all of the figures later, choose strokes. Illy will then trace single lines in the middle of the pen lines (or whatever tool those figures were drawn with).
Check the "Ignore White" option (Illy CS3 and up), so that the background won't be created as dozens of white objects.
Then check "preview" and adjust the other options. If that's the biggest scan you have, you will have to choose a rather small amount of "minimum area" (below 25) and "path fitting".
For both applies: the smaller the value, the exacter the result, but the more anchors in paths
Then you can only try and work with the "corner angle" setting.
After doing the trace, you have to expand it (in order to use the paths).
There's a quite detailed tutorial available at: http://www.adobe.com/products/illustrator/pdfs/creating_vector_content.pdf

How do i create 2 fetch proceess for diffrent table in the same apge

hi,
i create page with 2 from region each region assign to different table each region with DML BUTTON( CREATE,DELETE,UPDATE),there 2 Processes after header to fetch row into two region .now when i run page give me error Column t2 not found in table 1 where the 1st fetch rows Processes fetch data for all item in page Regardless of table name so give me error.
i mean that
Region one contain table 1 ....with Fetch row process ( to retrieve data into table 1)
Region Two Contain table 2....with Fetch row process( to retrieve data into table 2)
when i run page give me error Column t2 not found in table 1 and when test the sql stetmeni in debug mode i found that the process take all item in page so give this error where column t2 found in table 2 not one ..
my question
1- there is any way to assign the Fetch process to specific region so the process take all item in these region only.
2- how can create manual process to fetch row into specific items in page ( i tray these code
SELECT col1, col2, col3 ....
INTO :P1_ITEM1, :P1_ITEM, :P1_ITEM...
FROM table
WHERE id = :P_id ) but no data retrieve .
thanks
Ahmed
Edited by: Ahmed.F on Nov 27, 2012 5:10 PM

my question
1- there is any way to assign the Fetch process to specific region so the process take all item in these region only.
2- how can create manual process to fetch row into specific items in page ( i tray these code
SELECT col1, col2, col3 ....
INTO :P1_ITEM1, :P1_ITEM, :P1_ITEM...
FROM table
WHERE id = :P_id ) but no data retrieve .
I do not think that it is possible to have more than one Automated Row Fetch process in a given page. See the thread:
ORA-01403: no data found : Unable to fetch row multiple automated row fetch
On your second question, the manual process should work provided:
P_ID has a value when the process executes. You can do it this way:
i. Make this process as a on-load After/Before header process
ii. Make sure that P_ID page item has value when the process executes (set it from another page or before the pl/sql process executes)

How do you create a short cut to insert date in Numbers 3.1

Hi,
Does any one know how to create a keyboard shortcut for inserting the date in Numbers 3.1

The install-by-doubleclicking Automator Service (where it becomes a menu pick if you use it often and find that more convenient than a formula in a spreadhseet) is here (Dropbox download). Depending on your settings you may need to go to System Preferences > Privacy & Security and click the 'Open Anyway' button. If you want you can assign it a keyboard shortcut in System Preference > Keyboard > Shortcuts. If you don't like it or find you the formula is just as easy for you, then in Finder hold down the option key, choose Go in the menu and navigate to Library > Services, where you can trash it the way you would any file or package.
SG

How do I create a live copy of a table in Numbers?

Similar Messages

Maybe you are looking for