How do I disable one item in a radio buttons control at run time

I need to disable one item in a radio buttons control. At design time
this is possible, but how do I do this at run time? Is this possible? I
cannot find a property per item

Use the property "Controls[ ]" - this gives you an array with references of each single button in the radio buttons control. These you can access with property nodes too.
Hope this helps.
Using LV8.0
Don't be afraid to rate a good answer...

Similar Messages

  • How to disable a lead selected item in a radio button group ?

    Hi,
    I have a radio button group and there are entries to create radio buttons dynamically. means there is only one radio button group in the UI design and in runtime I will be having two radio buttons (For ex: Yes and No ) . Now If I want to disable either Yes or No radio button, I am unable to do so. because If I disable the radio button group it disables both.  So, I can have lead selected item for ex: Yes which I want to disable. I want to know specifically how this Yes button to be disabled by taking lead selected index item.
    Please help.
    Thanks
    Praveen

    Try setting the radio button value of the lead selected button to abap_false/space.

  • How do i disable menu items in Help manu, Photoshop cs6?

    How do i disable menu items in Help manu, Photoshop cs6?
    I packaged Photoshop cs6  using AAMEE CS6.
    I need to some menu items to disable.
    can any one please tell the process of doing , or which registries or files need to edit.
    Appreciate the immediate response.
    thanks in advance.

    Hello8
    Given the fact that you speak about AAMEE, it's not clear if you search for an automated and remote way to do it on multiple machines or not.
    (and therefore if this thread should be moved to the relevant forum, http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent )
    To disable menu items, simply go to Edit>Menus and click on the eyeball next to the menus you do not want.
    It is then possible to save it in a workspace that by default will be located there: Documents and Settings/[user name]/Application Data/Adobe/Adobe Photoshop CS6/Adobe Photoshop CS5 Settings/Workspaces (Modified)
    I'm not sure if Photoshop will start if the default workspaces are removed, as there is an option to restore them in the preferences.
    Also, this is not customer support, but a forum fielded by volunteers that answer when they can, so inviting for an"immediate response" has no bearing; and might even have the opposite effect, but thanks for doing it in a polite and non too demanding way!

  • How to hide/disable menu items using Javascript in Acrobat 9 pro or later

    We just wanted to know on how to hide/disable menu items for e.g. 'Open' menu item under 'File' menu in Acrobat 9 or later on Mac using Javascript. It would be useful if you could provide if any other option is in place already.

    Not sure it will work, but you can try using the app.hideMenuItem() method. See reference here.

  • How to stop just one item being reset when sumbit is pressed?

    How can i keep the value of just one item when the submit button is pressed. This field will always be the user id of the user logged on so i dont want it to be reset. I have tired doing a simple query to select the id everytime the page loads but the value then appears null when i do an insert statement to create a particular record for the user in a table.
    Anyone any ideas?

    Right I could see how the APP_USER would work but it wouldn’t work in this situation.
    To be more specific I want the id of the user which is called student id to stay the same all the way through the application as there id refers to them. What I have is that when a user logs on it takes them to their details and a menu part. One of the options is to enter some documents relevant to them. So when they click this option a new page opens showing a report of all the current documents as well as a form where you can update, insert new and delete documents.
    When you load the page the report and form work fine with the correct student id being passed form the pervious page. If however you create a document all the fields in the form get reset. I therefore want a way of stopping the student id from being reset when you create or delete a document. Basically if the page refreshes.
    I can run an sql query that gets the correct student id if the field is null and displays it correctly in the form but for some reasons (im guessing cos its a result of a query) when it tries to process this when I submit the field is null.
    Any ideas as this one has got me

  • How can we assign one attribute set to multiple business partners at a time ?

    How can we assign one attribute set to multiple business partners at a time ? Is it possible ? Can anyone explain me ?

    Hello,
    please refer to the following thread:
    How can we assign one Attribute Set to multiple Business Partners at a time? Is it possible?
    best regards,
    Johannes

  • How to change the numbers of items in a ring control in run time ?

    Hi !
    I would like change the numbers of items in a ring control in run time, but I can´t.
    Thanks.

    Hello blaze,
    did you try the "Strings And Values []" property of the ring?
    LabView7.1 help says:
    Array of clusters containing the strings from which you can select in the ring control
    and the numeric values for each item. Use the Strings [] property if you do not need to
    assign specific numeric values to each item.
    Best regards,
    GerdW
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • How to get the items of a radio button under each other?

    I want to place the items of a radio button : selectOneRadio under each other, but it doesn't work..
    The code I am using is :
                                                 <h:panelGrid columns="1" cellspacing="0" cellpadding="2"
                                                      border="0" styleClass="subitems">
                                                      <h:selectOneRadio value="#{travelerDataBean.travelParty}" >
                                                                <f:selectItems value="#{travelerDataBean.travelParties}" />
                                                      </h:selectOneRadio>
                                                 </h:panelGrid>
    Can someone help me?
    Thanks

    Use-
    .............layout="pageDirection"....................-- raju

  • How to raise pop up window along with radio buttons in module pool program

    how to raise pop up window along with radio buttons in module pool program

    FUNCTION zscheme_determination.
    *"*"Local Interface:
    *"  IMPORTING
    *"     REFERENCE(I_KUNNR) TYPE  KUNNR
    *"  EXPORTING
    *"     REFERENCE(E_VALUE) TYPE  NETWR_AK
    *"  TABLES
    *"      G_ITEM_DATA_ITAB STRUCTURE  ZITEM_DATA
    *  TYPES: BEGIN OF ty_sord,
    *         include type ZSD_SCHEME_DTL,
    *         END   OF ty_sord.
    *  data : gt_sord type standard table of ZSD_SCHEME_DTL,
    *         wa_sord type ZSD_SCHEME_DTL.
    *  select * from ZSD_SCHEME_DTL into table
    *  gt_sord
    *  where matnr = i_matnr.
    *  T_ITEM_DATA
    *********Data Declarations
       DATA:
             salesdocumentin LIKE bapivbeln-vbeln,
             orderheaderin LIKE bapisdhd1,
             orderheaderinx LIKE bapisdhd1x,
             sender LIKE bapi_sender,
             binaryrelationshiptype LIKE bapireltype-reltype,
             intnumberassignment LIKE bapiflag-bapiflag,
             behavewhenerror LIKE bapiflag-bapiflag,
             logicswitch LIKE bapisdls,
             testrun LIKE bapiflag-bapiflag,
             convert LIKE bapiflag-bapiflag,
             return LIKE bapiret2 OCCURS 0,
             orderitemsin LIKE bapisditm OCCURS 0,
             orderitemsinx LIKE bapisditmx OCCURS 0,
             orderpartners LIKE bapiparnr OCCURS 0,
             orderschedulesin LIKE bapischdl OCCURS 0,
             orderschedulesinx LIKE bapischdlx OCCURS 0,
             orderconditionsin LIKE bapicond OCCURS 0,
             orderconditionsinx LIKE bapicondx OCCURS 0,
             ordercfgsref LIKE bapicucfg OCCURS 0,
             ordercfgsinst LIKE bapicuins OCCURS 0,
             ordercfgspartof LIKE bapicuprt OCCURS 0,
             ordercfgsvalue LIKE bapicuval OCCURS 0,
             ordercfgsblob LIKE bapicublb OCCURS 0,
             ordercfgsvk LIKE bapicuvk OCCURS 0,
             ordercfgsrefinst LIKE bapicuref OCCURS 0,
             orderccard LIKE bapiccard OCCURS 0,
             ordertext LIKE bapisdtext OCCURS 0,
             orderkeys LIKE bapisdkey OCCURS 0,
             extensionin LIKE bapiparex OCCURS 0,
             partneraddresses LIKE bapiaddr1 OCCURS 0.
       DATA : wa_orderpartners LIKE bapiparnr,
              wa_orderitemsin LIKE bapisditm,
              wa_orderitemsinx LIKE bapisditmx,
              wa_orderschedulesin LIKE bapischdl,
              wa_orderschedulesinx LIKE bapischdlx,
              wa_orderconditionsin LIKE bapicond,
              wa_orderconditionsinx LIKE bapicondx,
              wa_return LIKE bapiret2,
              lv_value TYPE netwr_ak.
       DATA : lv_dtyp TYPE char45,
              lv_sorg TYPE vkorg,
              lv_sdch TYPE vtweg,
              lv_sdiv TYPE spart.
       TYPES : BEGIN OF ty_sord,
               zsdscheme TYPE comt_scheme_id,
               posnr TYPE posnr_va,
               matnr TYPE matnr,
               disc_type TYPE rebate_disc_type,
               calc_type TYPE catyp,
               qty_from TYPE kwmeng,
               qty_to TYPE kwmeng,
               spart TYPE spart,
               custcondgrp TYPE kdkg1,
               werks TYPE werks_d,
               matmn TYPE matnr,
               END   OF ty_sord.
       DATA : gt_sord   TYPE STANDARD TABLE OF ty_sord,
              gt_sordd  TYPE STANDARD TABLE OF ty_sord,
              wa_sord TYPE ty_sord,
              wa_knvv TYPE knvv,
              lv_cal_foc TYPE p DECIMALS 3,
              lv_cal_dis TYPE p DECIMALS 3,
              lv_new_qty TYPE kwmeng,
              lv_posmat TYPE posnr_va,
              lv_posfoc TYPE posnr_va.
       DATA:lv_diff TYPE kwmeng.
    ******Schemes Selection Logic
    * Get Valid Schemes
    * Validate Scheme for validity Period, Material, Customer Type and Plant
       TYPES : BEGIN OF ty_rtab,
               sign   TYPE c LENGTH 1,
               option TYPE c LENGTH 2,
               low    LIKE mara-matnr,
               high   LIKE mara-matnr,
             END OF ty_rtab.
    *  TYPES : ty_matnr TYPE RANGE OF ty_rtab.
       DATA : it_matnr TYPE TABLE OF ty_rtab,
              wa_matnr TYPE ty_rtab,
              wa_it    TYPE zitem_data,
             wa_tab TYPE zitem_data.
    *order table declaration
       TYPES:
             BEGIN OF ty_order,
               zsdscheme TYPE comt_scheme_id,
               matnr     TYPE matnr,
               kwmeng    TYPE kwmeng,
             END OF ty_order,
       BEGIN OF ty_scheme,
        zsdscheme TYPE comt_scheme_id,
    *                matnr     TYPE matnr,
        kwmeng    TYPE kwmeng,
      END OF ty_scheme.
       DATA:
             gt_order      TYPE TABLE OF ty_order,
             gt_scheme     TYPE TABLE OF ty_scheme,
              wa_scheme    TYPE ty_scheme,
              wa_order     TYPE  ty_order.
       DATA:i_kwmeng TYPE kwmeng.
    * Transfer all the material received from order to internal table
       LOOP AT g_item_data_itab INTO wa_it.
         MOVE : wa_it-matnr TO wa_matnr-low,
                'I'          TO wa_matnr-sign,
                'EQ'         TO wa_matnr-option.
         APPEND wa_matnr TO it_matnr.
         CLEAR wa_it.
       ENDLOOP.
    * Get the Valid Schemes based on given criteria
       SELECT
               zsd_scheme_dtl~zsdscheme
               zsd_scheme_dtl~posnr
               zsd_scheme_dtl~matnr
               zsd_scheme_dtl~disc_type
               zsd_scheme_dtl~calc_type
               zsd_scheme_dtl~qty_from
               zsd_scheme_dtl~qty_to
               zsd_scheme~spart
               zsd_scheme_hdr~custcondgrp
               zsd_scheme_hdr~werks
               zsd_scheme_hdr~matnr
       FROM zsd_scheme_hdr
       INNER JOIN zsd_scheme ON zsd_scheme~zsdscheme = zsd_scheme_hdr~zsdscheme
       INNER JOIN zsd_scheme_dtl ON zsd_scheme_dtl~zsdscheme = zsd_scheme_hdr~zsdscheme
       INTO TABLE  gt_sord
       WHERE  zsd_scheme_dtl~matnr IN it_matnr
    *    zsd_scheme_hdr~matnr IN it_matnr
    *    AND zsd_scheme_hdr~werks = '1509'
         AND zsd_scheme_hdr~werks = '1529'
         AND zsd_scheme_hdr~custcondgrp = '01'
         AND zsd_scheme~datuv LE sy-datum
         AND zsd_scheme~datub GE sy-datum.
       SORT gt_sord BY zsdscheme ASCENDING.
    *  LOOP AT gt_sord INTO wa_sord.
    *    READ TABLE g_item_data_itab INTO wa_it WITH  KEY matnr = wa_sord-matnr.
    *    wa_order-zsdscheme = wa_sord-zsdscheme.
    *    wa_order-matnr = wa_it-matnr.
    *    wa_order-kwmeng = wa_it-kwmeng.
    *    COLLECT wa_order INTO gt_order.
    *    CLEAR wa_order.
    *  ENDLOOP.
       LOOP AT g_item_data_itab INTO wa_it.
         READ TABLE gt_sord INTO wa_sord WITH  KEY matnr = wa_it-matnr.
         wa_order-zsdscheme = wa_sord-zsdscheme.
         wa_order-matnr = wa_it-matnr.
         wa_order-kwmeng = wa_it-kwmeng.
         COLLECT wa_order INTO gt_order.
         MOVE : wa_sord-zsdscheme  TO wa_scheme-zsdscheme,
                wa_it-kwmeng  TO wa_scheme-kwmeng.
         COLLECT wa_scheme INTO gt_scheme.
         CLEAR : wa_order, wa_scheme.
       ENDLOOP.
       CLEAR wa_scheme.
       DATA w_line TYPE sy-tabix.
    * Updating table based on Schemes
       LOOP AT gt_scheme INTO wa_scheme.
         CLEAR w_line.
         gt_sordd[] = gt_sord[].
    *    DELETE gt_sordd WHERE zsdscheme NE wa_scheme-zsdscheme and disc_type NE 'FOC'.
         DELETE gt_sordd WHERE zsdscheme NE wa_scheme-zsdscheme AND disc_type NE 'F'.
         DELETE ADJACENT DUPLICATES FROM gt_sordd COMPARING zsdscheme matnr.
         DESCRIBE TABLE gt_sordd LINES w_line.
         IF w_line GT 1.
    * popup message to select one foc type.
         ELSE.
           CLEAR wa_sord.
           READ TABLE gt_sordd INTO wa_sord INDEX 1.
           IF sy-subrc EQ 0.
             i_kwmeng = wa_scheme-kwmeng.
             lv_cal_foc = i_kwmeng DIV wa_sord-qty_from.
             lv_cal_dis = i_kwmeng MOD wa_sord-qty_from.
             MOVE : lv_cal_foc TO wa_it-kwmeng,
                    wa_sord-matnr TO wa_it-matnr.
             APPEND  wa_it TO g_item_data_itab.
             SORT gt_order BY kwmeng DESCENDING.
             LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme.
               IF lv_cal_dis GT 0.
    *        LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme
    *                                             AND lv_cal_dis GT 0.
    *                  LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme.
    *                LOOP AT g_item_data INTO wa_item_data WHERE matnr EQ wa_order-matnr.
                         LOOP AT g_item_data_itab INTO wa_tab WHERE matnr EQ wa_order-matnr.
                           wa_orderconditionsin-itm_number = wa_tab-posnr.
    *                  wa_orderconditionsin-itm_number = wa_item_data-posnr.
                           wa_orderconditionsin-cond_st_no = '001'.
    *                  IF gt_sordd-calc EQ ‘post AND disc_type EQ ‘percentage’.
                           IF wa_sord-calc_type EQ 'O' AND wa_sord-disc_type EQ 'P'.
                             wa_orderconditionsin-cond_type = 'ZTPB'.   "'ZREG'.
    *                  ELSEIF gt_sordd-calc EQ ‘pre’ AND disc_type EQ ‘percentage’
                           ELSEIF wa_sord-calc_type EQ 'E' AND wa_sord-disc_type EQ 'P'.
                             wa_orderconditionsin-cond_type = 'ZTPP'.   "'ZREG'.
                           ENDIF.
                           wa_orderconditionsin-currency = 'INR'.
                           wa_orderconditionsin-conpricdat = sy-datum.
                           APPEND wa_orderconditionsin TO orderconditionsin.
                           CLEAR wa_orderconditionsin.
    *Update Discount Conditon
                         ENDLOOP.
    *                  ENDLOOP.
    *Modify balance of Item
                 CLEAR wa_tab.
                 READ TABLE g_item_data_itab INTO wa_tab WITH KEY matnr = wa_order-matnr.
                 IF sy-subrc EQ 0.
                   lv_diff = wa_tab-kwmeng - lv_cal_dis.
                   IF lv_diff GT 0.
                     wa_tab-kwmeng  = wa_tab-kwmeng - lv_cal_dis.
    *            MODIFY g_item_data TRANSPORTING kwmeng  index sy-tabix.
                     MODIFY g_item_data_itab INDEX sy-tabix FROM wa_tab TRANSPORTING kwmeng  .
                   ELSE.
                     wa_tab-kwmeng  =  lv_cal_dis.
                     lv_cal_dis  = lv_diff.
                     MODIFY g_item_data_itab INDEX sy-tabix FROM wa_tab TRANSPORTING kwmeng .
    *            MODIFY G_ITEM_DATA_ITAB TRANSPORTING kwmeng index sy-tabix.
                   ENDIF.
                   gt_sordd[] = gt_sord[].
                   DELETE gt_sordd WHERE zsdscheme NE wa_scheme-zsdscheme AND disc_type EQ 'F'.
                   DESCRIBE TABLE gt_sordd LINES w_line.
                   IF w_line GT 1.
                     SORT gt_sordd BY zsdscheme DESCENDING.
    *              SORT gt_sordd BY quantity DESCENDING.
                     CLEAR wa_sord.
    *              LOOP AT gt_sordd WHERE quantity_from LT wa_shceme-kwmeng AND quantity_to GT wa_shceme-kwmeng.
                     LOOP AT gt_sordd INTO wa_sord  WHERE qty_from LT wa_scheme-kwmeng AND qty_to GT wa_scheme-kwmeng.
    *             LOOP AT gt_order INTO wa_order WHERE scheme = wa_scheme-scheme.
                       LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme.
    *                LOOP AT g_item_data INTO wa_item_data WHERE matnr EQ wa_order-matnr.
                         LOOP AT g_item_data_itab INTO wa_tab WHERE matnr EQ wa_order-matnr.
                           wa_orderconditionsin-itm_number = wa_tab-posnr.
    *                  wa_orderconditionsin-itm_number = wa_item_data-posnr.
                           wa_orderconditionsin-cond_st_no = '001'.
    *                  IF gt_sordd-calc EQ ‘post AND disc_type EQ ‘percentage’.
                           IF wa_sord-calc_type EQ 'O' AND wa_sord-disc_type EQ 'P'.
                             wa_orderconditionsin-cond_type = 'ZDPD'.   "'ZREG'.
    *                  ELSEIF gt_sordd-calc EQ ‘pre’ AND disc_type EQ ‘percentage’
                           ELSEIF wa_sord-calc_type EQ 'E' AND wa_sord-disc_type EQ 'P'.
                             wa_orderconditionsin-cond_type = 'ZDPD'.   "'ZREG'.
                           ENDIF.
                           wa_orderconditionsin-currency = 'INR'.
                           wa_orderconditionsin-conpricdat = sy-datum.
                           APPEND wa_orderconditionsin TO orderconditionsin.
                           CLEAR wa_orderconditionsin.
    *Update Discount Conditon
                         ENDLOOP.
                       ENDLOOP.
                     ENDLOOP.
                   ELSE.
                   ENDIF.
                 ENDIF.
               ENDIF.
             ENDLOOP.
           ENDIF.
         ENDIF.
       ENDLOOP.
    *  select
    *          ZSD_SCHEME_DTL~ZSDSCHEME
    *          ZSD_SCHEME_DTL~POSNR
    *          ZSD_SCHEME_DTL~matnr
    *          ZSD_SCHEME_DTL~DISC_TYPE
    *          ZSD_SCHEME_DTL~CALC_TYPE
    *          ZSD_SCHEME_DTL~QTY_FROM
    *          ZSD_SCHEME_DTL~QTY_TO
    *          ZSD_SCHEME~SPART
    *          ZSD_SCHEME_HDR~CUSTCONDGRP
    *          ZSD_SCHEME_HDR~WERKS
    *          ZSD_SCHEME_HDR~MATNR
    *  from ZSD_SCHEME_DTL
    *  inner join ZSD_SCHEME on ZSD_SCHEME~ZSDSCHEME = ZSD_SCHEME_DTL~ZSDSCHEME
    *  inner join ZSD_SCHEME_HDR on ZSD_SCHEME_HDR~ZSDSCHEME = ZSD_SCHEME_DTL~ZSDSCHEME
    *  into table
    *  gt_sord
    *  where ZSD_SCHEME_DTL~matnr = i_matnr and
    *        ZSD_SCHEME~DATUV LE sy-datum and
    *        ZSD_SCHEME~DATUB GE sy-datum.
    *  break-point.
    * Process Common Logic for Schemes Processcing
       CLEAR wa_sord.
    * Convert FOC Quantity and Materials
    *  LOOP AT gt_sord INTO wa_sord.
    **   lv_cal = i_kwmeng / wa_sord-QTY_FROM.
    *    lv_cal_foc = i_kwmeng DIV wa_sord-qty_from.
    *    lv_cal_dis = i_kwmeng MOD wa_sord-qty_from.
    *  ENDLOOP.
    *lv_new_qty = i_kwmeng - lv_cal_dis.
    * Get the Sales Document Type
       SELECT SINGLE low
    FROM tvarvc
    INTO  lv_dtyp WHERE
    name = 'SD_DOC_TYPE'.
       SELECT SINGLE * FROM knvv INTO wa_knvv WHERE kunnr = i_kunnr.
       IF sy-subrc = 0.
         lv_sorg = wa_knvv-vkorg.
         lv_sdch = wa_knvv-vtweg.
         lv_sdiv = wa_knvv-spart.
       ENDIF.
    * Give the Popup for schemes with multiple FOC
    * Schemes Specific Processing
    * Schemes Specific Processing
       orderheaderin-doc_type = lv_dtyp.
       orderheaderin-sales_org = lv_sorg.
       orderheaderin-distr_chan = lv_sdch.
       orderheaderin-division = lv_sdiv.
       wa_orderpartners-partn_role = 'AG'.
       wa_orderpartners-partn_numb = i_kunnr.
       APPEND wa_orderpartners TO orderpartners.
    *    wa_ORDERPARTNERS-PARTN_ROLE = 'WE'.
    *    wa_ORDERPARTNERS-PARTN_NUMB = p_ship.
    *    append wa_ORDERPARTNERS to ORDERPARTNERS.
    * Item number begin
       CLEAR : lv_posmat.
       lv_posmat = lv_posmat + 10.
       wa_orderitemsin-itm_number = lv_posmat.
       wa_orderitemsin-material = wa_sord-matmn.  "i_matnr.
       wa_orderitemsin-target_qty = lv_new_qty.
    *  wa_ORDERITEMSIN-TARGET_QU = i_VRKME.
       APPEND wa_orderitemsin TO orderitemsin.
       wa_orderitemsinx-itm_number = lv_posmat.
       wa_orderitemsinx-material = 'X'.
       wa_orderitemsinx-target_qty = 'X'.
       wa_orderitemsinx-target_qu = 'X'.
       APPEND wa_orderitemsinx TO orderitemsinx.
       wa_orderschedulesin-itm_number = lv_posmat.
       wa_orderschedulesin-sched_line = lv_posmat.
       wa_orderschedulesin-req_qty = lv_new_qty.
       APPEND wa_orderschedulesin TO orderschedulesin.
       wa_orderschedulesinx-itm_number = lv_posmat.
       wa_orderschedulesinx-sched_line = lv_posmat.
       wa_orderschedulesinx-req_qty  = 'X'.
       wa_orderschedulesinx-updateflag = 'X'.
       APPEND wa_orderschedulesinx TO orderschedulesinx.
       wa_orderconditionsin-itm_number = lv_posmat.
       wa_orderconditionsin-cond_st_no = '001'.
       wa_orderconditionsin-cond_type = 'ZDPD'.   "'ZREG'.
       wa_orderconditionsin-currency = 'INR'.
       wa_orderconditionsin-conpricdat = sy-datum.
       APPEND wa_orderconditionsin TO orderconditionsin.
       wa_orderconditionsinx-itm_number = lv_posmat.
       wa_orderconditionsinx-cond_st_no = '001'.
       wa_orderconditionsinx-cond_type = 'ZDPD'. "'ZREG'.
       wa_orderconditionsinx-updateflag = 'X'.
       wa_orderconditionsinx-cond_value ='X'.
       wa_orderconditionsinx-currency = 'X'.
       APPEND wa_orderconditionsinx TO orderconditionsinx.
    ****18/06Beg
    *  if not lv_cal_dis is initial.
    *    lv_posmat = lv_posmat + 10.
    *    wa_ORDERITEMSIN-ITM_NUMBER = lv_posmat.
    *    wa_ORDERITEMSIN-MATERIAL = WA_SORD-MATMN.  "i_matnr.
    *    wa_ORDERITEMSIN-TARGET_QTY = lv_cal_dis.
    **  wa_ORDERITEMSIN-TARGET_QU = i_VRKME.
    *    append wa_ORDERITEMSIN to ORDERITEMSIN.
    *    wa_ORDERITEMSINX-ITM_NUMBER = lv_posmat.
    *    wa_ORDERITEMSINX-MATERIAL = 'X'.
    *    wa_ORDERITEMSINX-TARGET_QTY = 'X'.
    *    wa_ORDERITEMSINX-TARGET_QU = 'X'.
    *    append wa_ORDERITEMSINX to ORDERITEMSINX.
    *    wa_ORDERSCHEDULESIN-ITM_NUMBER = lv_posmat.
    *    wa_ORDERSCHEDULESIN-SCHED_LINE = lv_posmat.
    *    wa_ORDERSCHEDULESIN-REQ_QTY = lv_cal_dis.
    *    append wa_ORDERSCHEDULESIN to ORDERSCHEDULESIN.
    *    wa_ORDERSCHEDULESINX-itm_number = lv_posmat.
    *    wa_ORDERSCHEDULESINX-sched_line = lv_posmat.
    *    wa_ORDERSCHEDULESINX-req_qty  = 'X'.
    *    wa_ORDERSCHEDULESINX-updateflag = 'X'.
    *    append wa_ORDERSCHEDULESINX to ORDERSCHEDULESINX.
    *  endif.
    *  lv_posmat = lv_posmat + 10.
    *  wa_ORDERITEMSIN-ITM_NUMBER = lv_posmat.
    *  wa_ORDERITEMSIN-MATERIAL = i_matnr.  "WA_SORD-MATMN.
    *  wa_ORDERITEMSIN-TARGET_QTY = LV_CAL_FOC.
    *  wa_ORDERITEMSIN-ITEM_CATEG = 'ZDGN'.
    **  wa_ORDERITEMSIN-TARGET_QU = i_VRKME.
    *  append wa_ORDERITEMSIN to ORDERITEMSIN.
    *  wa_ORDERITEMSINX-ITM_NUMBER = lv_posmat.
    *  wa_ORDERITEMSINX-MATERIAL = 'X'.
    *  wa_ORDERITEMSINX-TARGET_QTY = 'X'.
    *  wa_ORDERITEMSINX-TARGET_QU = 'X'.
    *  wa_ORDERITEMSINX-ITEM_CATEG = 'X'.
    *  append wa_ORDERITEMSINX to ORDERITEMSINX.
    *  wa_ORDERSCHEDULESIN-ITM_NUMBER = lv_posmat.
    *  wa_ORDERSCHEDULESIN-SCHED_LINE = lv_posmat.
    *  wa_ORDERSCHEDULESIN-REQ_QTY = LV_CAL_FOC.
    *  append wa_ORDERSCHEDULESIN to ORDERSCHEDULESIN.
    *  wa_ORDERSCHEDULESINX-itm_number = lv_posmat.
    *  wa_ORDERSCHEDULESINX-sched_line = lv_posmat.
    *  wa_ORDERSCHEDULESINX-req_qty  = 'X'.
    *  wa_ORDERSCHEDULESINX-updateflag = 'X'.
    *  append wa_ORDERSCHEDULESINX to ORDERSCHEDULESINX.
    ****18/06End
    * Item number end
    * Switch off dialog (BAPIs always run without)
       CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
       CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
         EXPORTING
    *     SALESDOCUMENTIN               =
         order_header_in               = orderheaderin
    *     ORDER_HEADER_INX              =
    *     SENDER                        =
    *     BINARY_RELATIONSHIPTYPE       =
    *     INT_NUMBER_ASSIGNMENT         =
    *     BEHAVE_WHEN_ERROR             =
    *     LOGIC_SWITCH                  =
    *     TESTRUN                       =
    *     CONVERT                       = ' '
    *   IMPORTING
    *     SALESDOCUMENT                 =
       TABLES
         return                        = return
         order_items_in                = orderitemsin
         order_items_inx               = orderitemsinx
         order_partners                = orderpartners
         order_schedules_in            = orderschedulesin
         order_schedules_inx           = orderschedulesinx
         order_conditions_in           = orderconditionsin
         order_conditions_inx          = orderconditionsinx
    *     ORDER_CFGS_REF                =
    *     ORDER_CFGS_INST               =
    *     ORDER_CFGS_PART_OF            =
    *     ORDER_CFGS_VALUE              =
    *     ORDER_CFGS_BLOB               =
    *     ORDER_CFGS_VK                 =
    *     ORDER_CFGS_REFINST            =
    *     ORDER_CCARD                   =
    *     ORDER_TEXT                    =
    *     ORDER_KEYS                    =
    *     EXTENSIONIN                   =
    *     PARTNERADDRESSES              =
    *    commit work.
       CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    *     EXPORTING
    *       WAIT          =
    *     IMPORTING
    *       RETURN        =
       LOOP AT return INTO wa_return.
         WRITE:/ wa_return-message.
       ENDLOOP.
    ENDFUNCTION.
    *& Include ZSD_SO_CHANGES2_TOP                               Module Pool      ZSD_SO_CHANGES2
    PROGRAM  ZSD_SO_CHANGES2.
    ***&SPWIZARD: DATA DECLARATION FOR TABLECONTROL 'ITEM_DATA'
    *&SPWIZARD: DEFINITION OF DDIC-TABLE
    TABLES:   VBAP,kna1.
    *&SPWIZARD: TYPE FOR THE DATA OF TABLECONTROL 'ITEM_DATA'
    TYPES: BEGIN OF T_ITEM_DATA,
              POSNR LIKE VBAP-POSNR,
              MATNR LIKE VBAP-MATNR,
              KWMENG LIKE VBAP-KWMENG,
              VRKME LIKE VBAP-VRKME,
            END OF T_ITEM_DATA.
    *&SPWIZARD: INTERNAL TABLE FOR TABLECONTROL 'ITEM_DATA'
    DATA:     G_ITEM_DATA_ITAB   TYPE T_ITEM_DATA OCCURS 0,
               G_ITEM_DATA_WA     TYPE T_ITEM_DATA. "work area
    DATA:     G_ITEM_DATA_COPIED.           "copy flag
    *&SPWIZARD: DECLARATION OF TABLECONTROL 'ITEM_DATA' ITSELF
    CONTROLS: ITEM_DATA TYPE TABLEVIEW USING SCREEN 4000.
    DATA:GV_NUM TYPE I VALUE 1,
           GV_NUM2 TYPE I.
    DATA:     G_T_YREC_TAB_LINES  LIKE SY-LOOPC.***********top*************
    *& Include ZSD_SO_CHANGES2_TOP                               Module Pool      ZSD_SO_CHANGES2
    PROGRAM  ZSD_SO_CHANGES2.
    ***&SPWIZARD: DATA DECLARATION FOR TABLECONTROL 'ITEM_DATA'
    *&SPWIZARD: DEFINITION OF DDIC-TABLE
    TABLES:   VBAP,kna1.
    *&SPWIZARD: TYPE FOR THE DATA OF TABLECONTROL 'ITEM_DATA'
    TYPES: BEGIN OF T_ITEM_DATA,
              POSNR LIKE VBAP-POSNR,
              MATNR LIKE VBAP-MATNR,
              KWMENG LIKE VBAP-KWMENG,
              VRKME LIKE VBAP-VRKME,
            END OF T_ITEM_DATA.
    *&SPWIZARD: INTERNAL TABLE FOR TABLECONTROL 'ITEM_DATA'
    DATA:     G_ITEM_DATA_ITAB   TYPE T_ITEM_DATA OCCURS 0,
               G_ITEM_DATA_WA     TYPE T_ITEM_DATA. "work area
    DATA:     G_ITEM_DATA_COPIED.           "copy flag
    *&SPWIZARD: DECLARATION OF TABLECONTROL 'ITEM_DATA' ITSELF
    CONTROLS: ITEM_DATA TYPE TABLEVIEW USING SCREEN 4000.
    DATA:GV_NUM TYPE I VALUE 1,
           GV_NUM2 TYPE I.
    DATA:     G_T_YREC_TAB_LINES  LIKE SY-LOOPC.
    ************************pbo*******************
    *&  Include           ZSD_SO_CHANGES2_PBO
    *&SPWIZARD: OUTPUT MODULE FOR TC 'ITEM_DATA'. DO NOT CHANGE THIS LINE!
    *&SPWIZARD: COPY DDIC-TABLE TO ITAB
    MODULE ITEM_DATA_INIT OUTPUT.
       IF G_ITEM_DATA_COPIED IS INITIAL.
    *&SPWIZARD: COPY DDIC-TABLE 'VBAP'
    *&SPWIZARD: INTO INTERNAL TABLE 'g_ITEM_DATA_itab'
    *    SELECT * FROM VBAP
    *       INTO CORRESPONDING FIELDS
    *       OF TABLE G_ITEM_DATA_ITAB.
    *    G_ITEM_DATA_COPIED = 'X'.
         REFRESH CONTROL 'ITEM_DATA' FROM SCREEN '4000'.
       ENDIF.
       ITEM_DATA-LINES = G_T_YREC_TAB_LINES + 15.
    ENDMODULE.
    *&SPWIZARD: OUTPUT MODULE FOR TC 'ITEM_DATA'. DO NOT CHANGE THIS LINE!
    *&SPWIZARD: MOVE ITAB TO DYNPRO
    MODULE ITEM_DATA_MOVE OUTPUT.
       MOVE-CORRESPONDING G_ITEM_DATA_WA TO VBAP.
    ENDMODULE.
    *&      Module  STATUS_4000  OUTPUT
    *       text
    MODULE STATUS_4000 OUTPUT.
       SET PF-STATUS 'APAR'.
    *  REFRESH G_ITEM_DATA_ITAB.
        GV_NUM = 1.
    *  SET TITLEBAR 'xxx'.
    ENDMODULE.                 " STATUS_4000  OUTPUT

  • How do I make a radio button control change automatically with time?

    Hello everybody
    I have a radio button selection with 4 options (Line A, B, C, D) which controls a number of valves depending on which line is sampled. Right now I have to do this selection manually but the proccess requires that each line is sampled for 15 seconds.
    Is there a way to do this automatically, meaning when I press a button (e.x. START) radio selection goes to Line A, after 15 seconds to line B, after 15 seconds to Line C, after 15 seconds to line B, after 15 seconds to Line D, and then from the beginnining to line A, B, etc..., until I press the stop button.
    Any help is appreciated
    Thanks for your time

    Hi evdo,
    'tst' is right. The "Radio Buttons" control from the "Boolean" palette
    is basically an Enum. You can add or remove elements as you want and
    only one element can be TRUE at any time (just as the Enum only can
    have one selected item at any time). Just copy and paste the radio
    buttons within the frame to add more choices/elements.
    I created a small example that takes tst's example a little further. I
    implemented the four choices and added an Event Structure for better
    timing. Give it a try and let me know what you think, thanks.
    Have fun!
    Message Edited by Philip C. on 07-06-2005 10:05 PM
    - Philip Courtois, Thinkbot Solutions
    Attachments:
    Radiogaga.PNG ‏14 KB
    Radiogaga.vi ‏25 KB

  • How can I change the slide to 8 Radio buttons mutually exclusive?

    How can I change the slide to 8 Radio buttons mutually exclusive?
    I saw the example in Labview. but it only contains upto 5 radio
    buttons. I need 8. How can I change it? Is there any shortcuts?

    I made this with NI's radio button control found in the boolean palette.  Just resize the cluster border, and move the buttons to where you want.  To add a button, select one of them, hold down Control and Shift keys, then drag the button to a new location.  The button gets duplicated.  Do this until you have enough buttons.
    Message Edited by tbob on 10-31-2005 01:07 PM
    - tbob
    Inventor of the WORM Global
    Attachments:
    RadioButtons.PNG ‏2 KB

  • [Urgent!!]How to control the running time??

    Hi,
    I'm an undergraduate researcher in the University of Michigan. I used NI labVIEW FPGA on my current project and now i meet a problem.
    I have a labview code that has runs with 3 subroutines. they execute one after another for a given time period for each iteration of the entire code. that is i built them in a flat sequence structure inside a large while loop and each of the subroutine is a while loop with several subvi's in it. not that complicated but i have to specify how long each subroutine runs. now i have a problem to set that execution time. i don't know exactly what kind of timing function i shall use. i tried the "Elapsed time" function but that only works for the first iteration. from the second iteration on each subroutine only runs for once, instead of continuing to run until the given time elapsed. so i don't know how to correctly control the running time. It's reallly urgent, so could you please give me some suggestions about it? Thanks a million!!
    Xiaofei

    Thank you for your suggestion!
    sorry but that this method won't help because my code is sort of difficult to put into a for loop .
    the logic is like this: first the output is set to 0 for a user-defined amount of time (means no excitation). secondly it gets excitation and gets output but no data saving is allowed for a user-defined amount of time. at the same time, one paramater is automatically changed. (the reason for not saving data is that there is a transient response when the parameter changes). thirdly, data saving begins with the same
    parameters as before, also for a user-defined amount of time. and then after these three steps one iteration is done. for iterations there is a different parameter, the user defines the range of the parameter and the number of different values in between and the code will do the increment at equal intervals automatically. my problem now is that i don't know how to correctly control the time. i have tried various ways but no one works.
    the second problem is that i don't know how to let it run and not saving data and then saving data without changing everything else. what i have now is to call the same VI twice, once for only running and no data saving and the other for saving data. but then the problem is that in between these two routines, the output suddenly becomes zero and gets excited again after i call it.  My professor said that i cannot let the output become zero, otherwise there is no meaning in waiting for the excitation to become stablee. but then i don't know how to call a VI only once and let it do the saving for only the latter part of the running time. i have been working on this thing for two weeks now and still have no idea....Sorry the problem is long and tedious, but if anyone have any idea about it, please let me know, i will be most grateful. Thanks a million!!!

  • How to apply a css style to a radio button.

    I cannot seem to persuade jsf to pass css styles through to a radio button.
    I have markup like this:
    <h:selectOneRadio id="direction" styleClass="largish-form" >
      <f:selectItem id="positive" itemLabel="positive" itemValue="positive" />
      <f:selectItem id="negative" itemLabel="negative" itemValue="negative"  />
    </h:selectOneRadio>Which gets transformed into something like:
    <!-- edited for brevity -->
    <td>
      <label>
        <input type="radio" name="comp-amount-form:direction" value="positive" class="largish-form" />
        positive
      </label>
    </td>So the style does not get applied to the text of the label. I was expecting something like
    <span class="largish-form"> positive</span>.So how do I get styled labels on my radio buttons?
    Thanks in advance.

    For a standard Portal page you should use the Portal styles and associate them to a page. These effectively generate a CSS style sheet anyway if you view the HTML source of a rendered page in your browser.
    Using the correct PDK APIs you effectively reference the CSS tags in your Java or PL/SQL code.
    If your portlet need to open a page in a new window you can no longer reference the Portal page style as the CSS style sheet does not get attached.
    In this situation, code your HTML as normal and reference your CSS style sheets as normal.
    If you create you CSS sheet you can store it in a page as a file and access using the direct access URL like I showed you in a previous response regarding the storing of images.
    Cheers,
    John

  • How to start Flash Media Encoder 3.2 from Flex application with run time parameters?

    Hello ,
    I'm developing the application to stream High Quality video.While streming by default camera/microphone settings the qulaity of streaming is not upto my expected level.I want to stream through Flash Media Encoder.My aim is the user login to the application.Video/audio qulaity details are retrived from shared object stored in the client machine.The login user name only gathered at run time & it will be the streaming profile name to Encoder.Once the the Encoder started the outgoing video will be come into screen to client.Please guide me How to start Flash Media Encoder 3.2 from Flex application with run time parameters(User name as  streaming name) without manually start the FME?
    Thanks in advance.
    Regards
    Sasharyuva

    Hi MarcSaphiron,
    Could you please send the samples?It will be much helpful to complete my
    job within the deadline.
    Thanks in advance.
    Regards,
    Sasharyuva

  • How do I delete  one item at a time from trash?

    How does one delete one item at a time from trash?

    In general, one doesn't.
    I suggest you create a new folder (I use "Trash Soon") on the desktop near the trash icon. Move all the stuff out of the Trash bin into the Trash Soon Folder. Then move the things you really want to eliminate to the Trash can. Empty Trash.
    DO NOT store anything you want to keep in the real Trash can. There are many activities that may cause "Empty Trash" a a side-effect.
    If you have multiple drives, The Trash is an illusion created for your convenience. The actual Items may be on several different drives, but all marked as "in Trash". Moving them to a folder on a different drive may cause unexpected copying.

Maybe you are looking for