How do I embed a url in a Quicktime file

I am having trouble embedding a url in a Quicktimne movie file. I understood this would be possible if I used Quicktime 7 and added Quicktime 7 Pro, but I'm not having any luck with instructions. Can you point me to a set of instructions that would tell me how to do this For what it's worth, my operating system is 10.7.4. Thank you.

I should mention also that I looked through the Quicktime 7 User Manual provided online by Apple, and couldn't find any reference to embedding a url in a movie file. But people talk online about being able to do it, so I'm assuming there's a way?

Similar Messages

How To "Dis-Embed" An Image From A .Doc File?

Here's what I've got. I'm working on a flier to be commercially printed; it contains four photos and text. I've spent a lot of time with each photo, massaging each in PE to maximize its quality when it's eventually printed, and saved each as a TIFF file. (I "tested" each photo's printability by seeing what I get when I run it through my own Canon printer.)
What I did next was to take each of the PE processed photos, moved them into a MS Word text document, and saved the final flier results as a .doc file.
Now, my commercial print shop tells me that better results might be obtained by me giving them the original photos instead of using the completed .doc flier. This is where my problem arises: it's not that I saved too few, I saved too many versions of the photos as works in progress. It's not an easy job to find the exact photo version I, finally, embedded. Using the "direct" approach doesn't seem to work. When I drag a photo out of its .doc file onto my desktop and try to open this clipping (PICT) with PE I get the message, "Could not complete your request because an unexpected end-of-file was encountered."
So, how do I "dis-embed" each of these photos from the original document and without losing all the nice stuff I did when first processing them? Any comments and suggestions will be appreciated.
Dave

Hi,
You can use javax.swing.ImageIcon like so
ImageIcon anIcon=new ImageIcon("image.jpg");Hope thats what you are after,
Cheers
Jack573

How do I copy the URL of a PDF file that I have opened in FireFox using FoxIt Reader add-on?

This does NOT seem to be a FoxIt question because, when I use FoxIt 5.0 as my PDF reader in Internet Explorer 8, I do not have this problem. I have encountered the problem only when using FoxIt 5.0 as my PDF reader in FireFox 4.0. The problem is quite annoying. I NEED to capture the URLs of the PDFs I view and I prefer to use FireFox as my browser. The problem exists because no destination field is displayed when FoxIt opens in FireFox. A destination field IS displayed when FoxIt opens in IE.

Another option for sending large files is to use :
http://www.filedropper.com/
You upload the files to the website and it creates
a URL that you can copy and paste into an email
which you send to the recipient and they use the
generated link to get the file.

How do you load a URL in .exe flash file without popping up in new window.

Hi
I have developed a full screen .exe flash file in actionscript 2. It controls physical lights (e.g. turn on and off) by simply calling a URL for each action. However, I don't want the called URL's to open in front of the interface. Is there a way to call a hidden URL in flash? Any advice would be much appreciated.
Thanks

Hi Daz
Cheers for getting back to me. Each light is controlled by calling a URL e.g.getURL("http://modelpc/LightControl/controllights.aspx?id=17&status=on");
Currently the code looks like this:
on (release) {
getURL("http://modelpc/LightControl/controllights.aspx?id=1&status=on");
The action is working when I use get(), but the URL pops up in a new window. I want to prevent this from happening. I am looking into using send (LoadVars.send method) at the moment...would this work? I have little experience with actionscript and its prooving to be a challenge.
Thanks

How do I export from FCP to a QuickTime file with multiple audio channels?

I'm delivering a project where the first step is to generate an HD Cam SR master, which I will be doing at a post-production lab. They will then do a QC check for me. To generate this HD Cam SR master, they need to me to bring in my 98-minute long movie on a firewire hard drive, in five equal parts -- QuickTime files. From these five QT files, the lab will then be creating an HD Cam SR master that will have...
dialogue on tracks 1 and 2
effects on tracks 3 and 4
music on tracks 5 and 6
MY QUESTION
a) I don't see any way to separate these audio tracks accordingly in the FCP menu for QuickTime export. Does anyone have any experience doing this?
b) And does anyone know the most efficient way to combine timeline audio tracks for this purpose? I have my dialogue sitting on the first FOUR audio tracks, actually. To deliver this film, I'll need to crush these four audio tracks to two, as listed above. I could generate an AIFF file, I suppose, import it back onto the timeline, sync it up, and then re-export along with the visuals to make the final QT file, but this seems like a generation loss.
thanks,
Shanked
PS the movie is made up of footage from a Sony PMW EX1. I used the codec "XDCAM 1080 24p 35mbs VBR" for editing in FCP. I'll either export to QT using this same codec or switch to "Apple ProRes" if my machine can somehow maintain the sync.

The following will answer both your questions a) and b).
Click on your master timeline and press cmd+0 (zero) to bring up Sequence Settings, then click on the Audio Outputs tab on the right. Click on the Outputs option and change it to 6. You can leave them as Stereo pairs.
Now, back on your timeline, you need to make sure all your audio is organised so each track. A1, A2, A3, A4 etc has all the relevant media on it.
Then, on the left of the timeline you see the Destination toggle buttons, then you see the Padlocks to lock tracks, then you have the Toggle Auto Select squares. If you right-click on the Toggle Auto Select squares you bring up a little sub-menu, at the top of this list you'll see Audio Outputs, which will show the stereo channels for that particular track. As you've changed the number of Audio Outputs in the Sequence Settings, the list will show: 1&2, 3&4, 5&6. You just tick whichever channels you want.
In your case, you have dialogue on the first 4 tracks, no problem, just go down through tracks 1,2,3 and 4 as described above and assign these to Audio Outputs 1&2.
Then just go down through your music and effects audio tracks and assign them accordingly.
Now, when you export your timeline as a self-contained media file, it will have different audio channels.
I hope that makes sense. When you change the number of audio outputs as described in the first step, I believe the rest of it is fairly self explanatory, once you know where the settings are.

How to embed a URL in a text component

Hi,
How would you embed a url within a text component such as static text?
thanks, paul.,

Hello,
I would like to embed an external url (such as http://google.com) inside a panel
My application is using several panels.
In a panel, I add dynamically different ImageHyperlink components.
I succeed to display in a different panel the expected infos when I click on a link.
Now for some kind of Hyperlink components, I would like to be able to embed an external site within a container of my application.
I read about <iframe> (http://www.codeproject.com/useritems/CreatorFrames.asp) but since I building most of my components dynamically. But I do not think that it could fit my needs.
Today, when I put a panel id as a target of an hyperlink component, the external website is open in a new browser window.
Thanks,
Val

How can I Embed Video

I'm trying to create an application that allows a user to
combine several types of media files into one swf file that can
then be passed around and viewed elsewhere. How can I embed a video
into the swf file? It won't work if you just use the Embed keyword.
Any ideas?

To insert a video in a Pages document it's really simple.
You open *_Pages User Guide_* and you use the Search tool to find the word "video".
As I'm not a bad guy, I will add that it's described page 24 (in the English version)
This said, I'm not sure that you will be able to play the video in an exported PDF.
In fact, I'm quite sure that you can't.
I don't have an available video file to make tests.
Yvan KOENIG (VALLAURIS, France) dimanche 16 janvier 2011 21:29:29

How can I embed a rmtp url in an swf file?

Hi
I have been trying to figure out how to embed an rmtp url in
an swf file for it seems like years. I want to stream to a flash
player from a flash streaming server, and I don't know how to
create the swf needed. Can anyone help? I would enormously
appreciate it!
I'm using Flash MX 2004.
Thanks
Mark

ps I am using Flash MX 2004

How do I embed an image in a post here?

How do I embed an image in a post here?

Hi Roger!
Some additional tips.
To post an image in  Discussions, create a Screen Shot of the image you wish to post.
Upload the image to an online storage facility, like one of these linked to below.
Flickr
ImageShack
PhotoBucket
PICVAULT
Twango
tinypic
imageno
Then use HTML formatting, to insert the URL of the location.
Use this format <img src="Insert URL Here">
Post the resulting line of text.
You can alternately insert the URL of the image between ! (Exclamation Marks) to have it appear in a post.
Keep the images small, and unobtrusive, when possible.
If the image is large, you can use this format:
<a href="Insert URL Here"target="_blank"><img src="Insert Same URL Here" width="Insert Desired Size Here"></a>
Desired Size is a number, dependent on the size to be displayed in the post, such as 20, 50, 200, etc. You can experiment with that number.
Below that type "Click to View Full Size".
The image will appear in the post at the size you selected, but when clicked, will open full screen.
You can also just post a Link/URL, to the image location, using this format:
<a href="Insert URL Here">Type Title Here</a>
Or use Skitch.
Quoted from the Skitch website:
"Skitch.com is a webservice that works hand in hand with our application Skitch to give you 1-click uploading of images for fast and fun image sharing."
ali b

How do I embed an email address in a form?

How do I embed an email address in a form?

In the Design tab add a formatted text field to your form. In the formatted text field select the text you want to create a link with. Go to menu Insert-> Link... In the Insert Link dialog you will add an email address to the bottom field (URL or Email) and click on the Insert button. The email address should be in the form of [email protected]
-Jeff

How do I get a url from quicktime?

I'm using iWeb to host my podcast. http://web.me.com/krushjudgement/Site/Giant-SizePodcast/Giant-SizePodcast.html
I'd like to have people visit my blogspot for updates. http://giantsizepodcast.blogspot.com/
Right now I'm using podtrac to stream, but I realized it might be easier just to stream the quicktime versions from my iWeb. I'd like to embed the episodes in quicktime format right onto my blog posts. I've found embed codes, but I don't know how to get the proper urls from iWeb.
Any ideas?

Are you trying to retrieve the material?
If so, open the page in Firefox-->Firefox Menu-->File-->Save Page As-->Save As: Web Page Complete...save to a folder. Firefox will download the html, javascript, css, images and the mp3 audio.
It took a few minutes for the page to load and another minute or two to download... And I'm on a very fast connection. I was getting around 5-6 MBs during the download.
The mp3 is 5 levels above the html. I have no idea what level or folder the video is at...
Message was edited by: David M Brewer

How do I embed bitmaps into a built (.exe) LabVIEW application?

I am trying to embedd bitmap images (icons) into the exe file of a built LabVIEW application. I tried it, and got them in a "data" folder. I want everything in the .exe file, you know, just like C/C++ or just about any other programming language.
If anyone has any tips, I would be grateful.
I know about embedding the images in the controls, but that is not my goal. I need images as files to be embedded, somehow, into the .exe. The reason is I am using the picture control to read the images, but they are static once they are read. If it is possible for the picture controls to somehow retrieve the images from some other source, that would work also.
Otherwise, if someone knows how to dynamicall
y embed bitmap or other images into buttons in an array, that would be useful as well.
Thanks

> I am trying to embedd bitmap images (icons) into the exe file of a
> built LabVIEW application. I tried it, and got them in a "data"
> folder. I want everything in the .exe file, you know, just like C/C++
> or just about any other programming language.
>
> If anyone has any tips, I would be grateful.
>
> I know about embedding the images in the controls, but that is not my
> goal. I need images as files to be embedded, somehow, into the .exe.
> The reason is I am using the picture control to read the images, but
> they are static once they are read. If it is possible for the picture
> controls to somehow retrieve the images from some other source, that
> would work also.
>
> Otherwise, if someone knows how to dynamically embed bitmap or other
> images i
nto buttons in an array, that would be useful as well.
>
Actually, many C and C++ programs, like LV itself have folders of data
that aren't linked into their code. But, if that is what you are
looking for, one pretty easy way is to load the images into memory and
place them into a 2D array of data, a string etc. Make an array of
these and make the value default. At runtime, you can now skip the file
I/O, or you can write the data to a temporary on launch and read them
back whenever you like.
Greg McKaskle

How can I find the URL for an iCal calendar in iCloud so I can make a link to it on a web page.

I have a single iCal calendar that I want people to access through my webpage. How can I find the URL so that they can view the calendar without having to subscribe to it. I converted to iCloud from .Mac and I can see that changes to this calendar are not showing up.

Mmmh.. i see... I don't know wether it is possible for people just check calendars without subscribing to them... I have been sharing some calendars in my website (maybe you can have a look at it in order to check wether it could be a possible solution for you)
http://web.me.com/andreabruschi/englishplanet/English_Courses.html
Cheers
Andrea

How can I embed an html signature in my mail

how can I embed an html signature in my mail signatures? I have done it easy with older operating systems, but have no idea with the 10.8.2. Following the olds steps don't work...can't "save as" in the library...that folder isn't even an option

http://code.coneybeare.net/how-to-make-and-html-signature-in-apple-mail

How can we provide 2 URLs in the HR personalization form, so that users can

We are not able to open the PDF report from the external node which is placed under the OA_HTML. Nvaigation is Employee Self Service for US -> Update or Add Direct Deposit Account
Internal urll ----"http://tech.com:8000/OA_HTML/TTEC_Benefits_Docs/Branded/DebitCrdholderBrochureSignature.pdf"
However, the external users from internet need to access the pdf document and this fails for them because they have no access to above URL from public internet. They need to get to above pdf document for e.g. as:
"https://publicerptech.com:443/OA_HTML/TTEC_Benefits_Docs/Branded/DebitCrdholderBrochureSignature.pdf"
How can we provide 2 URLs in the HR personalization form, so that users can access the pdf document?

Hello David,
Sorry for not getting back to you sooner. You can provide feedback on Transport agents by using this site:
http://officespdev.uservoice.com/.
With regards,
Michael | Microsoft Exchange Developer Content
The
Exchange Development Forum Guide has useful information for using the Exchange Development Forum.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How do I embed a url in a Quicktime file

Similar Messages

Maybe you are looking for