How do I find out that Overflow is being used
We have configured Overflow for one of our Caches using bdb.
I have a few questions with regard to the overflow scheme
1. How do I test that Overflow is being used indeed ?
2. Where does bdb store its data, is it on the file system or in memory ? Is there a way to see the data in the bdb scheme ?
3. Following is the configuration we are using, is that the right way to use overflow ?
Thanks,
J
<distributed-scheme>
<scheme-name>dist-person</scheme-name>
<service-name>dist-person-service</service-name>
<thread-count>15</thread-count>
<partition-count>6421</partition-count>
<serializer>
<class-name>
com.tangosol.io.pof.ConfigurablePofContext
</class-name>
<init-params>
<init-param>
<param-type>string</param-type>
<param-value>custom-types-pof-config.xml</param-value>
</init-param>
</init-params>
</serializer>
<backing-map-scheme>
<read-write-backing-map-scheme>
<internal-cache-scheme>
<overflow-scheme>
<front-scheme>
<local-scheme>
<high-units>968000000</high-units>
<low-units>726000000</low-units>
<unit-calculator>BINARY</unit-calculator>
<expiry-delay>5d</expiry-delay>
</local-scheme>
</front-scheme>
<back-scheme>
<external-scheme>
<scheme-ref>DiskOverflowScheme</scheme-ref>
</external-scheme>
</back-scheme>
</overflow-scheme>
</internal-cache-scheme>
<cachestore-scheme>
<class-scheme>
<class-name>com.sac.triton.stores.CustomCacheLoader</class-name>
<init-params>
<init-param>
<param-type>java.lang.String</param-type>
<param-value>com.entities.Person</param-value>
</init-param>
</init-params>
</class-scheme>
</cachestore-scheme>
<read-only>true</read-only>
</read-write-backing-map-scheme>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>
<external-scheme>
<scheme-name>DiskOverflowScheme</scheme-name>
<bdb-store-manager></bdb-store-manager>
</external-scheme>
Hello,
BDB will store its data on the file system. You can specify the locatino with the following:
<bdb-store-manager>
<directory>{FILE_LOCATION}</directory>
</bdb-store-manager>
As far as I am aware you can't see the data in the bdb scheme.
Regards,
Nick
Similar Messages
-
HT4211 how can you find out what kb are being used by what apps
how can you find out what kb are being used by what apps there is always alot of kb being used even when I don't use my phone
Go into settings , general, usage and it tells you what the apps use. If your refering to the memory storage of the apps.
-
Delegate control, how can I find out which one is being used?
I am working with some mysites customizations and came across a delegate control. How can I tell which control SharePoint is currently pointing this delegate control to? If someone already swapped it out, how would I know?
<SharePoint:DelegateControl runat="server" ControlId="ColleaguesLink1" Scope="Farm" />
What does ColleaguesLink1 currently point to? What did it originally point to?This blog post may get you started (same applies to SharePoint 2010):
http://usingsystem.wordpress.com/2008/04/11/sharepoint-delegatecontrol/
I hope this helps,
Regards,
Yuri Lausberg, MCP, MCAD, MCSD, MCTS, MCPD -
How to find out that particular structure is used in which tables
Hello Friends,
Most of the times through techinal information we come to know the table name for a particular field.And in se16 when i give that table name than system says its structure and not the table.So in se11 when i give that structure name in database table field, its shows all the field in that structure, but not the data stored in that field.
So my question is how to find out that particular structure is used in which tables,so that i can view data stored in that structure?
Thanking you guys in advance.
Regards,
JitendraDear,
When you click on the technical information it will give the structure name and field, double click on the structure and it will take you the display structure screen, there you will have the where-used List icon (Ctrl + Shift + F3) at the top , click on that and it will show the options, select Database tables and execute, it will give the tables related to the structure, you can explore the list of tables and find where your required field is stored in them.
Thanks & Regards,
Vijaya Bhaskar A -
How can we find out that the Z table is adjusted or not???
Dear Friends,
How can we find out that the Z table is adjusted or not???
I have activated it but I need to se that the table is adjusted or not? I know we can do it from SE14 but I don't have an authorization ,
Thnaks,
SridharHi, Thanks for the reply,
As per ur suggestion of path direction I have checked the table in production and development both.
In my Z table, I have 2 key fields and for those 2 key fields the primary indexs are created automaticaly and displayed in Developement but in Production there is no indexs are created for those 2 fields.
Could you please guide me what could be the reason?
Thanks in advance.
Regards
Sridhar -
How do I find out if another devise has used my account?if yes can that devise be identified?
Here are the specs for your HP 2000-2a22NR Notebook Computer. Here is the HP 2000 / Compaq CQ58 - Maintenance and Service Guide for your computer. Compatible CPUs are listed on Page 1, Section 1, Products description under AMD models. CPU upgrades only valid on models with Intel processors. On AMD models, the processor comes with the system board and cannot be removed. Look it up!!!
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
How to find out which queries are being used ?
We have a number of InfoSet Queries which the users are calling from SQ00. Some of them are very old.
I would like to find out which queries are being used, so we can have the idle queries decommissioned.
How can this be done ?
Best regards,
PeterHi,
It's been a while since I've done this but one method is to use ST03N & look for the execution of programs with an AQ* prefix. The general structure is AQZZ/<query user group><query name>.
You could probably get the same info from the audit log but I've not checked that.
Cheers, -
How do I find out what features are not useful in my Classifier?
How do I find out what features are not useful in my Classifier? I am trying to trim down the number of features to speed up the training of my data, I have about 3700 features. I have found the Filter Based Feature Selection Module and have not been successful
in using it. I have looked through all the examples and have not been able to find any examples using the module. Will the Filter Based Feature Selection Module help me to trim features. If so how do I use it?One way to do this would be is to use a random forest classifier. Feature/variable importance can be obtained relatively easily with random forests.
Here is how you may do it in R.
> install.packages('randomForest') #install randomForest package in R if it is not already there
> library(randomForest) # reference the library
> data(mtcars) # load motor cars data that ships with
#train a random forest
> mtcars.rf <- randomForest(mpg ~ ., data=mtcars, ntree=1000,keep.forest=FALSE, importance=TRUE)
> importance(mtcars.rf)
> importance(mtcars.rf)
#You will see an output like below
%IncMSE IncNodePurity
cyl 16.168645 169.96741
disp 18.672188 260.08722
hp 17.584375 184.95007
drat 6.948743 63.54528
wt 17.818509 254.30347
qsec 4.772889 33.25546
vs 5.303058 24.39064
am 5.210181 17.36626
gear 4.619161 21.55450
carb 8.577037 28.46715
# or plot the importance as follows
> varImpPlot(mtcars.rf)
What this tells you is how important predictors/features/variables like horsepower(hp), weight(wt), no. of cylinders (cyl) is in predicting miles per gallon (mpg).
If you are wondering how the data looks like. Try this
head(mtcars) # gives first few lines of the data set.
mpg cyl disp hp drat wt ...
Mazda RX4 21.0 6 160 110 3.90 2.62 ...
Mazda RX4 Wag 21.0 6 160 110 3.90 2.88 ...
Datsun 710 22.8 4 108 93 3.85 2.32 ...
. Try this
Here is a few useful resources:
Random Forest documentation (Check out the pages on variable importance and variable importance plot)
http://cran.r-project.org/web/packages/randomForest/randomForest.pdf
Motor cars data: http://stat.ethz.ch/R-manual/R-devel/library/datasets/html/mtcars.html -
How do I find out what filters I have used in an open document?
How do I find out what filters I have used in an open document? I have been playing around with several filters and do not remember what I have done. I would like to use this filter setting for another image.
Thanks1) save as psd for reverting later if needed
2) Click on the filter closest to the bottom in the history panel.
3) Choose the filter from the filter menu that was listed in the history panel
4)See what settings are there then click cancel
5)Repeat for the next filter up on the history panel
Do all of this before creating more steps that could push those steps from the history panel or close the document or photoshop as the history panel will be cleared.
Disclaimer: Even though the settings should be in the filters that you used last, there is no guarantee especially if used again afterwards with a different setting. -
How do I find out if my comp was using iCloud back up? It was stolen
How do I find out if my comp was using iCloud back up? It was stolen
On a computer, go to iCloud.com. Sign in then click Find My iPhone. That will find all your registered devices including your Mac. The Mac must be turned on and Find My Mac selected in System Preferences > iCloud prior to being stolen.
-
How do I find out what program / file is using 100 GB of space on my Hard drive? Once I find the problem how do I delete the specific files to increase GB of space?
Use OmniDiskSweeper
Once you find file, it can be deleted from within OmniDiskSweeper
Allan -
TS2755 How can I find out what devises have been used to log into using my Apple ID?
How can I find out what devises have been used to log into my Apple ID?
You can't. If you think someone has change your password. If someone complains you will know who it is.
-
How can we find out the disk which is used for a mount point
How can we find out the disk which is used for a mount point?
one of our mount point(/u03/oracle/prod) was using high I/O and this was causing slowness in the server.
I can see a disk operation error in errpt at the same time as below. Wanted to check whether the mount point /u03/oracle/prod is using the disk hdisk31
$errpt|more
IDENTIFIER TIMESTAMP T C RESOURCE_NAME DESCRIPTION
DXB78877 1125032114 T H hdisk31 DISK OPERATION ERROR
OS version:AIX 6.1
DB:11.2.0.2this is the output for cat /etc/filesystem
/u02:
dev = /dev/fslv00
vfs = jfs2
log = /dev/loglv00
mount = true
options = rw
account = false
/u01:
dev = /dev/fslv01
vfs = jfs2
log = /dev/loglv00
mount = true
options = rw
account = false -
I am trying to find out which one of my daughters is buying music through I tunes and is posting to my credit card. How can I find this out. I have the transaction numbers from my credit card.
If they have separate iTunes accounts then you can check each account on your computer's iTunes : log into an account on your computer's iTunes via the Store > View Account menu option, and you should then see a Purchase History section with a 'see all' link to the right of it. Click on that and you should then see a list of its purchases.
If they share the same account then you can't tell, the purchase history doesn't show the device or computer that a purchase was made on. -
I did a past and copy and I really liked the font - I did a right click to open fonts and went back and forth between the fonts that I had and the font that got pasted and the FONT box did not show what the FONT names were.
Any idea on how to find this out?
ThanksI am asked that often by my publisher friends.
All you have to do is DRAG down the FONT box so it shows more fonts.
Right now you probably have it on it's "default" size (show fonts), but if you enlarge the show font box, and then go "back and forth" between the two fonts, you will see the fonts that the program is using.
Hope this helps.
Frankii
If the copy is from the internet, 9 times out of 10 it is going to be Arial or Verdana.
Message was edited by: frankii
Maybe you are looking for
-
How can I open and print a unix E....le file
how can I open and print a unix E...le file
-
Ipod nano 1st gen. not connecting to computer
My ipod connects to the computer because my computer makes a sound when I plug it in. But everytime I do, the computer tells me to connect it to a high speed usb port. Apparently I have 10 "high speed" ports I wasn't aware of. I have tried changing p
-
Mac Pro 3.1 eight core FCP 6 shows all 8 cores rendering??
I just got a Mac Pro early 2008 3.1 with eight cores...running Leopard 10.5.8 I've read on this forum at times that FCP does not use more than 4 cores when rendering. But when I render 1080p pro res 442 in FCP 6 all eight cores run up over 90%, an
-
Problem on XY Regression Chart
Hi All, I created an XY Regression Chart which shows a straight line extrapolating the points plotted. Now for this line of type Y=mX + C, I want slope(m) and y-intercept(C) to be displayed on Applet. Does XY Regression Chart provide this fac
-
Can't start Tux 6.5 BBL
Hi. I hope someone can help me with the following problem. I am trying to resolve a problem starting a PeopleSoft Process Scheduler maintained by Tuxedo 6.5 on AIX 4.3 Each time I attempt to start it, it starts two of the three required processes, th