How do I fix this error in Visual Studio: The specified command ID does not exist
The entire error message is:
Error occurred in deployment step 'Retract Solution': The specified command ID 'Microsoft.VisualStudio.SharePoint.Commands.DoesSolutionWithIdExist' does not match any available SharePoint remote commands.
Parameter name: commandId
I'm developing an app for SharePoint Online using Visual Studio 2012. This error started after I created a developer site with "Spanish" as the language. Then I add "Spanish" to the "Supported Locale" in the appmanifest.xml
and tried to debug on the Spanish developer site.
Hi,
Based on the error message, it seems the specific command ID not exists in the “Microsoft.VisualStudio.SharePoint.Commands” namespace.
For a better troubleshooting, I suggest you do as the followings:
1. Add languages to Supported Locales in AppManifest.xml.
2. Try to debug you app project to see if there are something wrong in your code.
Here are some detailed articles for your reference:
http://blogs.msdn.com/b/officeapps/archive/2012/10/12/locale-support-information-is-required-for-all-apps-in-the-sharepoint-store.aspx
http://srichallagolla.blogspot.in/2013/03/sharepoint2013-debugging-provider.html
Best Regards
Jerry Guo
TechNet Community Support
Similar Messages
-
RDS Gateway + Smart Card Error [ The specified user name does not exist.]
I have the following Windows Server 2008 R2 servers:
addsdc.contoso.com, AD DS Domain Controller for contoso.com
adcsca.contoso.com, AD CS Enterprise CA, CDPs/AIAs published externally.
fileserver.contoso.com, RDS Session Host for Administration enabled
rdsgateway.contoso.com, RDS Gateway enabled
tmgserver.contoso.com, 'Publishing' rdsgateway.contoso.com but with pass-through authentication
And the following Windows 7 PCs:
internalclient.contoso.com
externalclient.fabrikam.com
There's no trust between the domains, the external client is completely separate on the internet but the CA certificate for contoso.com has been installed in the trusted Root CA store. All servers have certificates for secure RDP.
I enrolled for a custom 'Smart Card Authentication' certificate with Client Authentication and Smart Card Logon EKUs from the CA, stored on my new Gemalto smart card using the Microsoft Base Smart Card CSP.
From internalclient.contoso.com, I can RDP to fileserver.contoso.com
using the smart card just fine with no certificate errors.
From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
via rdsgateway.contoso.com using a username and password just fine with no certificate errors.
From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
via rdsgateway.contoso.com using the smart card to authenticate to the gateway, and a username and password to authenticate to the end server, just fine.
BUT from when using a smart card to authenticate to the end server via the gateway, it fails with:
The specified user name does not exist. Verify the username and try logging in again. If the problem continues, contact your system administrator or technical support.
When I move the client into the internal network and try the connection again (still via the RDS Gateway), it works fine - the only thing I can think of is being outside the network and not being able to contact the AD DS DC for Kerberos is causing the issue
- but I'm pretty sure this is a supported scenario?
The smart card works fine internally, the subject of the certificate is the user's common name (John Smith) and the only SAN is
[email protected] which matches the UPN of the user account as it was auto-enrolled.
Does anyone have any ideas?I had a similar issue where I am using a smart card through a Remote Desktop Gateway. I had to disable Network Level Authentication (NLA) on the destination Remote Desktop Server. If anyone has another way around this, I'd appreciate hearing it. I'd prefer
to use NLA. -
Cannot optimize volume - Receive error "The specified extrinsic Method does not exist"
When I try to optimize a volume on a server running Windows Server 2012 (R1). I receive the below error. This volume is an ISCSI target to our Compellent SAN. Other Servers don't have an issue with volumes created on the same SAN and I have already ran ChkDsk
and it returned no errors. Oddly enough I can run a "Defrag T: /D" but a "Defrag T: /O" returns
"Incorrect Function. (0x80070001)" (Incidentally an "Optimze-Volume T -Defrag" also works)
Any Ideas? I'm stumped!
Command:
Optimize-Volume -DriveLetter T -Verbose
Error:
VERBOSE: Invoking slab consolidation on iSCSI_SAN01_ExchLogFiles (T:)...
VERBOSE: Slab Analysis: 100% complete.
optimize-volume : The specified extrinsic Method does not exist.
At line:1 char:1
+ optimize-volume -DriveLetter T -Verbose
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : MetadataError: (MSFT_Volume (Ob...2-a802-ba7e...):ROOT/Microsoft/...age/MSFT_Volume) [Optimize-Volume], CimException
+ FullyQualifiedErrorId : MI RESULT 17,Optimize-VolumeI did stumble upon that article as well and working through it didn't help. This is an Exchange 2013 server but I wouldn't think that that would exclusively cause a problem like this (unless there is something under the hood that Exchange 2013 is secretly
doing). The C drive is for the OS, the M drive is for the Exchange DB, and the
T drive is for the Logs. The C drive is "directly" connected and the M and T drives are on the same SAN (different LUNs) via iSCSI. This is running as a virtual guest on VMWare ESXi v5.5. I have other servers setup the
same way (not Exchange servers though) with drives on the iSCSI SAN and there are no issues when I run those Optimize-Volume commands. Here is some more output from the console:
PS C:\Users\administrator> Optimize-Volume -DriveLetter T -Analyze -Verbose
VERBOSE: Invoking slab consolidation on iSCSI_SAN01_ExchLogFiles (T:)...
VERBOSE: Slab Analysis: 0% complete...
Optimize-Volume : The specified extrinsic Method does not exist.
At line:1 char:1
+ Optimize-Volume -DriveLetter T -Analyze -Verbose
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : MetadataError: (MSFT_Volume (Ob...2-a802-ba7e...):ROOT/Microsoft/...age/MSFT_Volume) [Optimize-Volume], CimException
+ FullyQualifiedErrorId : MI RESULT 17,Optimize-Volume
PS C:\Users\administrator> Optimize-Volume -DriveLetter M -Analyze -Verbose
VERBOSE: Invoking slab consolidation on iSCSI_SAN01_ExchMailStoreDB (M:)...
VERBOSE: Slab Analysis: 0% complete...
Optimize-Volume : The specified extrinsic Method does not exist.
At line:1 char:1
+ Optimize-Volume -DriveLetter M -Analyze -Verbose
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : MetadataError: (MSFT_Volume (Ob...2-93f1-0050...):ROOT/Microsoft/...age/MSFT_Volume) [Optimize-Volume], CimException
+ FullyQualifiedErrorId : MI RESULT 17,Optimize-Volume
PS C:\Users\administrator> Optimize-Volume -DriveLetter C -Analyze -Verbose
VERBOSE: Invoking analysis on (C:)...
VERBOSE: Analysis: 0% complete...
VERBOSE: Analysis: 22% complete...
# ... Repeated ...
VERBOSE: Analysis: 94% complete...
VERBOSE: Analysis: 99% complete...
VERBOSE: Analysis: 100% complete...
VERBOSE: Analysis: 100% complete.
VERBOSE:
Post Defragmentation Report:
VERBOSE:
Volume Information:
VERBOSE: Volume size = 84.48 GB
VERBOSE: Cluster size = 4 KB
VERBOSE: Used space = 63.18 GB
VERBOSE: Free space = 21.29 GB
VERBOSE:
Fragmentation:
VERBOSE: Total fragmented space = 4%
VERBOSE: Average fragments per file = 1.23
VERBOSE: Movable files and folders = 153593
VERBOSE: Unmovable files and folders = 6
VERBOSE:
Files:
VERBOSE: Fragmented files = 2745
VERBOSE: Total file fragments = 35394
VERBOSE:
Folders:
VERBOSE: Total folders = 4819
VERBOSE: Fragmented folders = 2
VERBOSE: Total folder fragments = 2
VERBOSE:
Free space:
VERBOSE: Free space count = 74005
VERBOSE: Average free space size = 296.00 KB
VERBOSE: Largest free space size = 409.42 MB
VERBOSE:
Master File Table (MFT):
VERBOSE: MFT size = 308.00 MB
VERBOSE: MFT record count = 315391
VERBOSE: MFT usage = 100%
VERBOSE: Total MFT fragments = 4
VERBOSE: Note: File fragments larger than 64MB are not included in the fragmentation statistics.
VERBOSE:
You do not need to defragment this volume. -
Line 1 Error - Value 120 for the flexfield segment Company does not exist
{color:#0000ff}Receiving the following error message in the "Submit Expense Report - Expense Allocation" page:
"Error : Line 1 Error - Value 120 for the flexfield segment Company does not exist in the value set XX_GL_COMPANY"
This error message is shown when the user is entering the expense report in R12 Oracle Internet Expenses responsibility. After the user has finished entering the expense lines and after the user has reviewed the default expense allocation values in the expense allocation page, upon clicking on the next button , this error message is shown.
Has anybody experienced this issue?
We have opened a Service Request with Oracle but so far there is no resolution. This issue occurs intermittently. It is NOT consistent. We have advised the user base with the following workarounds to over this bug:
1. The system administrator shall clear the cache using Functional Administrator responsonsibility
OR
2. Advise the application user to sign-off from Oracle Applications and allow 5 minutes before they sign-in again.
Any help or advise in the matter is appreciated.
Thank you.
{color}Check these things
1. you have enable PerPeriodOfService DFF to this set.
2. you are setting Context Variable like (AttributeCategory) with requried value.
Thanks -
Error in data loading "The object R3TR AQQU *does not exist"
Hello Guys,
I am trying to load full data from my datasource to DSO but whenever i am running infopackage, its failing with error message
"Job terminated in source system Message no. RSM078"
I am checking in job overview it said
"The object R3TR AQQU * does not exist
The TADIR entry for the object R3TR AQQU SYSTBWGENER0SY000000000102 cannot be entered because the object does not exist yet."
Please suggest.
Regards,
DollyHi Dolly,
I think your DS is based on an ABAP query which is not available in the source system. Check if that is transported/active. -
Setting up a PDC: error-"The specified domain either does not exist or.....
**** Everyone...
Please, would someone give me some help to resolve the error (WIN7):
"The specified domain does not exist or could not be contacted."
I have Open Directory, DNS and SMB running. No errors are present.
Any info I can give to help solve,please ask.
Thank you.Sorry, that problem is not an DNS problem but an SMB 3.0.28a (version used in SLS 10.6.1) problem in conjunction with Windwos 7. It is well know that Samba versions before 3.3.4 won´t work with Windows 7, see http://ggts.net/2009/05/17/joining-a-windows-7-system-to-a-samba-domain/ and https://bugzilla.samba.org/show_bug.cgi?id=6680
You can to some easy command-line test on the Win7 client, e.g. nltest dctest:<domainname> and you will see that domain and pdc are properly resolved but the client can not be added due to password bugs.
It´s time for now Apple to move on to a more recent version of samba, version 3.0.28a is 20 months old!!!
Right now, OS X Server 10.6.1 with OD/SMB as PDC is not usable with Windows 7 clients right now! Since this bug is known since 2 months and fixed 5 days later it´s quite impressing how Apple looks after their customers! -
I've tried clearing the browser cache and restarting the computer, but nothing helps. No idea what's wrong. Any ideas?
You also could delete any saved cookies for that site:
While viewing a page on the site, right-click and choose View Page Info > Security > "View Cookies"
Then try reloading the page. Does that help?
When I search this error message, I find threads indicating it is a problem on the web server, and there's not much a user can do to fix it. For example:
http://www.fixya.com/support/t2835936-webspeed_error_from_messenger_process
You could try to confirm that diagnosis by using a different browser or a different computer.
If it persists, you probably should complain to the site. Perhaps they are aware of some add-on conflict or other browser configuration issue that affects Firefox users specifically.
Edit: When I visit the site's root address, within about 5 seconds I get the error. But links I visit from Google results (site:hachik.com) work fine, e.g., http://www.hachik.com/about.html So there is something about the dynamic navigation that is broken. -
How do I fix this error message??
How do I fix this error message
"This message could not be delivered and will remain in your Outbox until it can be delivered.
The SMTP server "smtp.mac.com" doesn't support TLS (SSL) on port 25. Please check your account settings and try again."
ThANK YOU!!!
RichMail Help has some articles devoted to sending problems, e.g. “I can't send email” or “I can't send email because the connection to the server on port 25 timed out”. You may want to take a look at them in case there is something there that applies to you.
Something that usually works if you’re trying to use an outgoing (SMTP) server different from the one provided by your ISP (and in the case of .Mac in particular) is changing the outgoing server port to 587 instead of 25 in Preferences > Accounts > Account Information > Outgoing Server Settings. -
When I started up itunes on my PC I get this error: a required itunes component is not installed. please repair or reinstall ituens (-42404). How can I fixed this? I uninstalled it at least 6 times. Not exactly sure what I'm suppose to repair either. It also says it is syncing my ipod but when I go to disconnect/eject my ipod it says that it is unable to disconnect because files are being used in a program. When it finally disconnects there is no music on my ipod. The gym just ***** with out my ipod. Makes it eiser to not go! Someone please help me!
Use the instructions here to completely remove/uinstall all iTunes/Apple software and componenets and then start from scratch.
http://support.apple.com/kb/HT1923
B-rock -
Error in Migration Db sql server to sql Azure, how i can fix this errors
I get an error TOTAL_WRITE is not supported in current version when i try validate my database from sql server migration in to sql azure. How I can Fix this error migrate to sql azure
Also I git this error sp_spaceused is not supported in current version of Azure SQL Database – Reynel Useche Velasco 22 mins ago
StoredProcedure [dbo].[p_sizetables] -- 'db_name(' is supported only for the local database. You should test to verify the results are what you want. – Reynel Useche Velasco just now edit
Reynel Alfredo Useche VelascoHi Reynel,
I see that you have posted this query on stack overflow.
I would like to involve our SQL experts in this topic and get the best solution.
As of now to my knowledge @@TOTAL_WRITE is not supported on SQL Azure.
In the meantime, you can refer the below links for migrating your database from on-prem to Azure.
https://msdn.microsoft.com/en-us/library/hh313125(v=sql.110).aspx
https://msdn.microsoft.com/en-us/library/hh313129(v=sql.110).aspx
Hope this helps you.
Girish Prajwal -
How I can fix this error message in the Windows Server - kCGErrorFailure: No workspace dictionary?
How I can fix this error message in the Windows Server - "kCGErrorFailure: No workspace dictionary"? This occurs after every startup or restart.
You probably don't need the hard drive and optical drive specs, but here they are?
======================
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 1.5 Gigabit
Description: AHCI Version 1.20 Supported
HL-DT-ST DVD-RW GH41N:
Model: HL-DT-ST DVD-RW GH41N
Revision: PQ06
Serial Number: K3D9BH92251
Native Command Queuing: No
Detachable Drive: No
Power Off: No
Async Notification: Yes
Bay Name: Upper
HL-DT-ST DVD-RW GH41N:
Model: HL-DT-ST DVD-RW GH41N
Revision: PQ06
Serial Number: K3D9BH92251
Native Command Queuing: No
Detachable Drive: No
Power Off: No
Async Notification: Yes
Bay Name: Upper
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
Hitachi HDP725050GLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: Hitachi HDP725050GLA360
Revision: GM4OA5CA
Serial Number: GEA534RJ06E63A
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 1
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk1s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk1s1
Content: EFI
OSXLION:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 192.76 GB (192,758,513,664 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s2
Mount Point: /
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk1s3
Content: Apple_Boot
Hitachi HDP725050GLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: Hitachi HDP725050GLA360
Revision: GM4OA5CA
Serial Number: GEA534RJ06E63A
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 1
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk1s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk1s1
Content: EFI
OSXLION:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 192.76 GB (192,758,513,664 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s2
Mount Point: /
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk1s3
Content: Apple_Boot
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
WDC WD2002FYPS-02W3B0:
Capacity: 2 TB (2,000,398,934,016 bytes)
Model: WDC WD2002FYPS-02W3B0
Revision: 04.01G01
Serial Number: WD-WCAVY7048785
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk3
Rotational Rate: 5400
Medium Type: Rotational
Bay Name: Bay 2
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk3s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk3s1
Content: EFI
BU2TB-Time:
Capacity: 2 TB (2,000,054,960,128 bytes)
Available: 1.1 TB (1,096,926,654,464 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk3s2
Mount Point: /Volumes/BU2TB-Time
Content: Apple_HFS
WDC WD2002FYPS-02W3B0:
Capacity: 2 TB (2,000,398,934,016 bytes)
Model: WDC WD2002FYPS-02W3B0
Revision: 04.01G01
Serial Number: WD-WCAVY7048785
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk3
Rotational Rate: 5400
Medium Type: Rotational
Bay Name: Bay 2
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk3s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk3s1
Content: EFI
BU2TB-Time:
Capacity: 2 TB (2,000,054,960,128 bytes)
Available: 1.1 TB (1,096,926,654,464 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk3s2
Mount Point: /Volumes/BU2TB-Time
Content: Apple_HFS
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
WDC WD10EAVS-00D7B1:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD10EAVS-00D7B1
Revision: 01.01A01
Serial Number: WD-WCAU43604330
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Bay 3
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
Data:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 715.55 GB (715,549,786,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /Volumes/Data
Content: Apple_HFS
WDC WD10EAVS-00D7B1:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD10EAVS-00D7B1
Revision: 01.01A01
Serial Number: WD-WCAU43604330
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Bay 3
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
Data:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 715.55 GB (715,549,786,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /Volumes/Data
Content: Apple_HFS
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
WDC WD1003FBYX-01Y7B0:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD1003FBYX-01Y7B0
Revision: 01.01V01
Serial Number: WD-WCAW31850957
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk2
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 4
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk2s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk2s1
Content: EFI
BUOSXLION:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 697.88 GB (697,881,690,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk2s2
Mount Point: /Volumes/BUOSXLION
Content: Apple_HFS
WDC WD1003FBYX-01Y7B0:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD1003FBYX-01Y7B0
Revision: 01.01V01
Serial Number: WD-WCAW31850957
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk2
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 4
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk2s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk2s1
Content: EFI
BUOSXLION:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 697.88 GB (697,881,690,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk2s2
Mount Point: /Volumes/BUOSXLION
Content: Apple_HFS -
When I tried to run php file I am getting the following error message, "/home/karthick/Desktop/PHP files/third.php could not be opened, because the associated helper application does not exist. Change the association in your preferences." How to fix this?
first, you just asked me to use MS file Explorer to see what the properties were.,..and to ask what happened. Yes - that's on my hard drive. The problem I have is opening word files in a DB that is web enabled.....I've used Firefox browser for that, and everything else , for years...... When I look at the Tools, and options on FireFox., as your support page noted.....NOTHING is listed in the Applications tab....hence my note asking for help. The file I need to open is a Word file out on a web enabled DB. It's not on my hard drive - I have to problems opening docs there - but for that, I don't use Firefox
-
TS1368 how can i fix this error:"please contact itunes support to complete this transaction"
how can i fix this error:"please contact itunes support to complete this transaction"
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support visit online support site.
For iTunes: Apple Support for iTunes - Contact Us -
How do you fix this error? Can't access photos----" Your photo library is either in use by another application or has become unreadable"
Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If you can create and use a new library then your current library is damaged.
If that's the case make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
I'm getting a error "check activation". how do I fix this error?
I'm getting an check activation error when trying to download a digital book using adobe digital editions. How do I fix this error?
For this problem, you need to deauthorize and authorize ADE again.
Launch ADE
Help -> Erase authorization.
ADE will be deauhorized.
Now again AUTHORIZE ADE
Help-> authorize computer.
Error will be fixed !!
Maybe you are looking for
-
XML data source and relative path
Hi, I'm developing my reports in a Windows environment and deploying it on a Linux. My problem is, I cannot seem to specify a relative path for my XML datasource. Since, my deployement is in Linux, I cannot have the standard "C:\myreport\def.xml". Is
-
I have tried six times to upgrade Camera Raw via the "Help" menu in CS5. Each time it seems to download, but it always gives me an error message stating that there was a problem with the installation. I am trying to open .rw2 files from my Panasoni
-
HI All, I am getting 'Formatting error in KETDAT(Required Delivery Date)' field while creating salesorder for given recording in BDC programm.i am giving data through a RFC which is having structures same as BAPI_SALESORDER_CREATEFROMDAT2 . (i am
-
my ipod reads "0 KB used" "0 KB free" in the 'About' tab in 'Settings' but my music is GONE!!, no content! PLEASE Help I have or had over 3000 songs on ipod Classic!!
-
Need to find a SPAM bot on the network
How can I use my PIX-515e firewall to locate the source of a SPAM bot on a network? The PIX is running v6.3.5.