How do I get a case to run only once

I am using an e-series DAQ board to bring a pwm signal, then I use labview to use that signal to pick one of three cases. depending on the case picked a finite pulse stream is sent out. Currently the finite pulse vi keeps repeating because the the program stays in the case. I need a way to get labview to run the finite pulse output only once, and not run again until a new case is picked. I don't have the case in a while loop.
Thanks For The Help

I am still haveing problems so I will try and attach my program and see if you can help a little more that. It will probably be easier for you to look at this way. When you look at the diagram sequence 0 is the one the problem is in. In that sequence you will see a case structure and that is where the finite pulse train vi is. When case 1 is selected the finite pulse train will run again and again until I leave case 1. I need to have the program run the finite pulse train once and then wait and do nothing until the case is changed. The finite pulse train will be in all cases inside the case structure I just haven't done that yet, I am waiting until it works. The pulse train is used to move a stepper motor that is why running only once is im
portant because the stepper motor is used to position something.
Attachments:
AMC_Eagle_Both_Inputs_Working_2.vi ‏266 KB

Similar Messages

  • How do I submit a job to run only once?

    I have a stored procedure that submits a job. If this job fails, I don't want it to continue trying to run. Does anyone know how to ensure that it will only run once, no matter what?
    I did try something similar to the following:
    procedure proc_submitted_as_job(p_job_no number) is
    begin
    dbms_job.broken(p_job_no, true);
    end;
    However, I found out that if you change the Broken state while a job is running, then it gets reset when the job completes.
    Basically, I'm using the dbms_job utility to run a long-running procedure in the background. If there's another way to obtain this same result, I'd love to hear it.

    I am still haveing problems so I will try and attach my program and see if you can help a little more that. It will probably be easier for you to look at this way. When you look at the diagram sequence 0 is the one the problem is in. In that sequence you will see a case structure and that is where the finite pulse train vi is. When case 1 is selected the finite pulse train will run again and again until I leave case 1. I need to have the program run the finite pulse train once and then wait and do nothing until the case is changed. The finite pulse train will be in all cases inside the case structure I just haven't done that yet, I am waiting until it works. The pulse train is used to move a stepper motor that is why running only once is im
    portant because the stepper motor is used to position something.
    Attachments:
    AMC_Eagle_Both_Inputs_Working_2.vi ‏266 KB

  • How to make the concurrent request set run only once

    Hi Team,
    Ijust have a requirement.
    At a time only single concurrent request set should be running and the remaining submitted request sets should be in pending status.
    I mean to say : i have a concurrent request set : "Invoice Req Set"
    If user submits the request set multiple times: Invoice Req Set once
    the second one should not be running until the first request set : "Invoice Req Set" completes.
    Any suggestions ??
    -Sridhar

    Hi;
    Please check below which could be helpful for your issue:
    how to prevent multiple request of one conc program
    Regard
    Helios

  • How do i get my ipad to run itunes 10.6

    how do i get my ipad to run itunes 10.6

    If you haven't already done so then you need to download and install iTunes on your computer and add your music to it (File > Add To Library) and you should then be able to connect your iPad to your computer and sync your music to it.
    Syncing music : http://support.apple.com/kb/HT1351
    If you have iTunes 11 on your computer then you may find the instructions on that page easier to follow if you enable the left-hand sidebar via option-command-S on a Mac, control-S on a PC)
    If you haven't synced the iPad to that computer before then you may also find this page useful : https://discussions.apple.com/docs/DOC-3141

  • How can I get my games to run smooth with apple tv. I'm getting jerky movement

    How can I get my games to run smooth with apple tv?

    Check your network for interference (www.istumbler.net, check router manual in regards to changing channels) and other activities possibly running in the background.

  • How can I get an mp4 video running on iPad Mini?

    How can I get an mp4 video running on iPad Mini, which is already in the iTunes File?

    Pad2, the new iPad Supported Video Formats & Movie Formats
    H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
     Cheers, Tom

  • How to get lauchctl daemons/agents to run only once a day

    How do you get a daemons/agents to run only once a day regardless of the error code of the .sh you are running?
    (not I'm not looking for run once or run on reboot. I want a job to run at 3am every day and it has several bash commands in it. Regardless of the returns by any of the commands in the script, I only want this to run once - NO RESPAWN).

    Ok still not working.. here is the plist
    the .sh file does file processing and then uploads xml files to my server and should run once a day. Here I have it running at 11:45am. It completes and then runs again and again and again.
    The plist is placed in LaunchAgents and loaded with $launchctl load com.iclassicnu.crontabtest.plist
    ideas?
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>label</key>
    <string>com.iclassicnu.crontabtest</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Users/dan/Desktop/iClassicNu/Idea/Forexite/ForexUpdate.sh</string>
    </array>
    <key>WorkingDirectory</key>
    <string>/Users/dan/Desktop/iClassicNu/Idea/Forexite</string>
    <key>OnDemand</key>
    <false/>
    <key>Nice</key>
    <integer>1</integer>
    <key>StartCalendarInterval</key>
    <dict>
    <key>Hour</key>
    <integer>11</integer>
    <key>Minute</key>
    <integer>45</integer>
    </dict>
    <key>StandardErrorPath</key>
    <string>/Users/dan/tmp/icnTest1.err</string>
    <key>StandardOutPath</key>
    <string>/Users/dan/tmp/icnTest1.out</string>
    </dict>
    </plist>

  • How can I get my macbook pro running Lion to print on my HP photosmart 309a??

    how can I get my macbook pro running Lion to print on my HP photosmart 309a??

    Did you install the drivers? Or have Software Update install them? This printer is supported:
    http://support.apple.com/kb/HT3669

  • How do I get .aspx files to run on my ipad2

    How do I get .aspx files to run on my ipad2

    aspx files are ASP.NET web pages. You just type the url of the file into your browser's address bar. For example http://theSiteAddress/index.aspx.
    If you mean you want to serve ASP.NET web pages you must be running Microsoft's IIS web server or a server with Microsoft extensions, which you can not do with an iPad. If you mean you want to open an aspx file for editing, these are just text files so use your favorite text editor and open the file for editing.

  • How can I get quicktime pro 7 running

    I bought quicktime pro 7 a couple of years ago and have a registration code.  At the time I used the program to make some time lapse movies.  I'd like to make a couple of time lapse movies again but quicktime pro 7 is no where to be found.  This probably ha something to do with updating the os between then and now.  The question is how can I get quicktime pro 7 running again?  The unlocking instructions I have for quicktime pro 7 that I received with the key do not correspond with what the system preferences now show.  Any assistance would be appreciated.  I am currently running OS X version 10.9.5 on an older iMac.

    Open the QuickTime 7 player(if it’s not installed, click here), choose Registration from the QuickTime Player 7 menu, and supply your key there.
    (115130)

  • I have a I-mac that is not able to upgrade the os past 10.7.5, when I go to upgrade Pages it says i have to be running os 10.10, how can I get Pages that will run with os 10.7.5.

    I have a I-mac that is not able to upgrade the os past 10.7.5, when I go to upgrade Pages it says i have to be running os 10.10, how can I get Pages that will run with os 10.7.5.

    Click here and follow the instructions. If they’re not applicable, buy an iWork 09 DVD from a source such as Amazon or eBay.
    (116937)

  • How to get page one to animate only once in interactive pdf?

    how to get page one to animate only once in interactive pdf? I like when the document opens up in acrobat and the the page animations work but when I go to one of the pages and hit my designated home button it goes back to page one but it reloads again. As a user it would drive me crazy to have to wait for all of it to load......anyway to have that page one load once as the opening page?

    I don't think you really mean animations (unless you have a placed SWF file) because things created with the Animation panel don't work in PDF. Nonetheless, you're talking about some kind of interactivity which is set to happen On Page Load.
    So when you return to that page, of course the interactivity loads again.
    There isn't a On Page Load Once command.
    Perhaps you need to rethink why the interactivity is there. If it's important, maybe it should be triggered by a rollover or by clicking a button.

  • I accidentally hit the REMOVE FROM LINE button on my Premium Voice Mail. How can I get it back? The only options I found was visual voice mails.

    I accidentally hit the REMOVE FROM LINE button on my Premium Voice Mail. How can I get it back? The only options I found was visual voice mails.

    TheAshburns,
    No worries, we can get you back on the road with the correct voicemail service. Just to be clear, did you want to readd Premium Visual Voicemail? If so, click the link and select question #7 for steps http://www.verizonwireless.com/support/visual-voice-mail-faqs/?lid=sayt&sayt=visual%20voic*
    SandyS_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • I'm stationed and bought my iPad in Japan. How do I get my iPad to print only English (I keep getting Japanese text)?

    I'm stationed and bought my iPad in Japan. How do I get my iPad to print only English (I keep getting Japanese text)?

    Change App Store
    1. Tap "Settings"
    2. Tap "iTunes & App Stores"
    3.Tap "View Apple ID"
    4. Enter your user name and password.
    5. Tap "Country/Region."
    6. Tap "Change Country/Region"
    7. Select the region where you are located.
    8. Tap "Done".

  • How do i fire a query/Stored procedure only once

    Hi,
    I have a master frame and multiple child frames. Master frame triggers child1 frame which triggers child 2 frame etc using some common keys between the frame.
    Now each frame executes a stored procedure and then uses the Db2 cursor as a record set. However when the same frame is fired again then the stored procedure is triggered again. But i could very well use the same record set from the record set that i already have,
    In other words i need to fire the stored procedure/query only once and not every time the frame is fired.
    I just need to get the record set for each frame and then operate on the retrieved record sets.
    Is there a way to do this?
    Currently I experience serious performance issues as the stored procedures get fired repeatedly thousands of times
    Any help will be greatly appreciated
    Thanks
    anand

    I am still haveing problems so I will try and attach my program and see if you can help a little more that. It will probably be easier for you to look at this way. When you look at the diagram sequence 0 is the one the problem is in. In that sequence you will see a case structure and that is where the finite pulse train vi is. When case 1 is selected the finite pulse train will run again and again until I leave case 1. I need to have the program run the finite pulse train once and then wait and do nothing until the case is changed. The finite pulse train will be in all cases inside the case structure I just haven't done that yet, I am waiting until it works. The pulse train is used to move a stepper motor that is why running only once is im
    portant because the stepper motor is used to position something.
    Attachments:
    AMC_Eagle_Both_Inputs_Working_2.vi ‏266 KB

Maybe you are looking for