How do I get rid of Terminal,It is preventing access to pictures
I have an iMac 27in 3.2 ghz 16GB memory running Yosemite 10-10-2.When I try to open "pictures" I get a small window headed "Terminal"and this prevents "pictures" opening,this only occurs on pictures .How do I get rid of Terminal ?
Back up all data before continuing.
Please triple-click anywhere in the line below on this page to select it:
xattr -c Pi*
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign ($) to appear below what you entered. You can then quit Terminal. Test.
Similar Messages
-
The message icon on my iphone indicates that there is an unopened text message, but when i go into it, it just opens up a blank message, and there is no option to delete it. Any suggestions how i can get rid of this message, and prevent my phone from always opening up in the blank message whenever i go into my messages, rather than just opening as my inbox?
Many thanksHard restart.. While the phone is powered in, hold the power and home button. Hold them down and keep them held down. the phone will eventually shut itself off and reopen. keep held down till you see the appl elogo, then release. This will not delete anything off your phone, it will just force all apps to stop their current process. If you just turn the phone on and off, it will just pick up where it left off. Good luck
-
How do I get rid of the grid lines that appeared when I opened my picture in Photoshop?
So I was going to edit a .jpg file in Photoshop and when I went to place it or open it in the software, it showed me this weird set of lines that sort of make a grid. How do I get rid of them since it overlaps with my picture?
or Ctrl (Cmd) ; to toggle the guides of and on, or Ctrl (Cmd) h to hide (toggle) Guides, Grid, and Marching ants.
-
Why is there a popping noise when I cut between angles in a multi cam edit? How do i get rid of it?
I shot an interview. I recorded it on an h4n-One person was on channel 1 and the other was on channel 2. When I cut between them in a multi edit it creates a popping noise. How can I get rid of this and/or prevent this from happening?
I had this.. I didn't cure it I just slipped the edit until it went. Not always possible. What I would do on avid or fcp 7 is add a dissolve to the audio tracks.. So you could do that in the fcp x way
-
Where did this box come from? I can find no reference to it anywhere in the system preferences. Above all, how do I get rid of it?
System Preferences > Accessibility > Zoom > More Options...
Deselect it. -
My screen is in zooom mode all the time. how do i get rid of zoom?
my screen on iphone 4 is in zoom mode all the time. how do i get rid of zoom?
settings/general/accessibility then turn zoom off
-
I have a black block appeared on my screen, how do I get rid of it?
I Have a black block appeared at the bottom of my screen how do I get rid of it?
Settings>General>Accessibility>Assistive Touch>Off.
-
"Other" login identity. How do I get rid of it?
I am using an iMac desktop running Lion 10.7.5. I had a problem last night. When I tried to login, I typed in my password. It seemed like it was going through its normal routine but it took me back to the gray screen where you type in your password. I tried typing in my password again and again, but it never worked. It always went back to the gray screen where you type in your password. I tried restarting, it didn't work. I tried running the disk utility, it didn't work. I went online with my Macbook Pro and found the following article:
https://discussions.apple.com/docs/DOC-3622
I tried resetting the PRAM, it didn't work. I evenually tried step 6 in this article - resetting the password, it didn't work. I tried
Reset Home Directory Permissions and ACLs, (part of step 6). That didn't work, but when I restarted the machine after trying to "Reset Home Directory Permissions and ACLs", I now had two options to login, my regular identity and a new one called "Other". Eventually, I tried reinstalling Lion. That DID work, but now when I start the machine I still have the two indentities at the login screen. How can I get rid of the identity labled "Other"? I tried going to "Users and Accounts" to delete it in the "normal" way, but that didn't work, the "Other" account is not listed in the Users and Accounts preferences window. The "Other" identity IS still there when I go to login. How do I get rid of this? Thanks!Joe
OK, so root is disabled from login, but "Other" still appears.
Well, you could try biovizier's idea, but … both "OTHERUSER" and "SHOWOTHERUSERS_MANAGED" are set to true in my "/Library/Preferences/com.apple.loginwindow.plist", and I don't see the "Other" user in my login pane.
Here's what worked for someone a while back, in 10.3 days I think.
First, let's just take a backup of your NetInfo database. Open the Terminal (from /Applications/Utilities) and copy and paste the following into the Terminal window, one line at a time, with a return after each line:
cd /var/db/netinfo
cp -p local.nidb local.nidb.origAfter the first return you will be prompted for your password. This is not echoed for security reasons: just type it and press return.
Then you can quit Terminal, and open NetInfo Manager. Be careful!
In Netinfo Manager, authenticate and navigate to /users/root.
Delete the generateduid (if there is one) and authentication_authority fields (the whole line, not just the values—select the line and click "Delete").
Select the "passwd" line and edit its value (double-click the value to do this) to a single *.
Close the window and accept the changes when prompted.
Now quit NetInfo Manager, and start Directory Access (in /Applications/Utilities). Under the Services tab, is "NetInfo" enabled? If it is, turn it off (you will need to authenticate).
As I say, this worked under 10.3, but may no longer be relevant. -
I have two MacBook Pros on my local wi-fi network. I usually have these connected to each other over my wi-fi network. Normally, I only connect to my old computer (MacBookPro) from the new computer (MacBookPro2), so I can access files on my old computer that are typically not on my new computer. I use the same admin username (John Doe) and password on each computer. Currently, I have Mavericks (10.9.5) on my old computer and Yosemite (10.10) on the new MacBook Pro. All
I am now getting a recurrent request to connect to old computer even when I am already connected! When this request is being made, I am asked to connect to a username (johndoe instead of John Doe). The exact alert:
Enter your name and password for the server "MacBook Pro".
connect as << button is pressed for Registered User >>
Name: johndoe
Password: _________
<< Cancel button >> << Connect button >>
When I enter correct user name (John Doe or johndoe) and password for my account on Mavericks computer, the connection fails (whether I connected to Mavericks computer or not), and I get the following:
There was a problem connecting to the server "MacBookPro". The share does not exist on the server. Please check the share name and try again.
If I change to the proper share name John Doe and use the correct password, I still am not connected and I get the same failure message and am asked to use the correct share name again. If I cancel message, the connection message goes away for a while whether I am actually connected to old computer or not. It will then come back on the workspace I am currently using on my new macbook. When I am downloading files using terminal, the connect request comes up constantly if I continue canceling the message which is really irritating. How do I get rid of this constantly recurring request to connect???It means you must be connected to your computer via Wi-Fi (or cable).
Or wait for iOS 5 -
I tried to manually clear my Time Machine back up drive (a La Cie) of some of the older backups. But now the Trash is filled with files (over 130,000) and it doesn't seem to want to trash them - it's taking forever!! how do I get rid of them now in a quicker way?
dear Sue
i've tried the alt solution to empty trash but it does not work
I still got the -8003 error
for emptying time machine backups that i foolishly put in the trash
i've also tried this solution using terminal and it did not work either
http://www.imore.com/how-force-empty-trash-your-mac-using-terminal
any help you might offer would be greatly appreciated
i am using a 24 inch iMac
OSX 10.6.8
Message was edited by: summer_laughter -
How do I get rid of the "other" space that's taking up my disk space?
So my mac has been constantly giving me notifications about how my hardrive space is almost full. So I went into my storage space to find out what was taking up so much space on my laptop to find that this "other" seems to be taking up the most space. So I was just wondering how I can decrease this or how I can get rid of it?
For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal. -
How do i get rid of "other" on macbook air? its taking up too much room
How do I get rid of the "other" storage space on my macbook air? it takes up too much on my small 64GB macbook air? I must get rid of it as I have now space to put anything on my computer.
For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal. -
FILES: how do I get rid of EXEC status and set them to open with "none"?
I dropped my laptop and damaged the drive. My computer forensic friend salvaged specific files.
Transfered to a FAT32 drive and then copied to Mac.
Most of files are fine with the exception of some setings files that showed up as Unix executables. The few original files that I have to compare them to, show "Document" as the file "Kind" and the "open with" shows "none" in Get Info
When I look at the contents of the files they look fine. How do I get rid of the EXEC status and set them to open with "none"?
Any help would be greatly appreciated.
These are settings files for a set of .wav samples for an AU drum plug-in.If you have xcode installed, you might want to find out what the type and creator code for these files should be. Since the files have visited a FAT32 file sytem, you will have lost all resource forks as well as type and creator HFS+ meta data.
So assuming you do have xcode, create a new AU drum plug-in file then in the terminal:
<pre style="padding-left: .75ex; padding-top: .25em; padding-bottom: .25em; margin-top: .5em; margin-bottom: .5em; margin-left: 1ex; max-width: 80ex; overflow: auto; font-size: 10px; font-family: Monaco, 'Courier New', Courier, monospace; color: #444; background: #eee; line-height: normal">/Developer/Tools/GetFileInfo newfile</pre>
Then use:
<pre style="padding-left: .75ex; padding-top: .25em; padding-bottom: .25em; margin-top: .5em; margin-bottom: .5em; margin-left: 1ex; max-width: 80ex; overflow: auto; font-size: 10px; font-family: Monaco, 'Courier New', Courier, monospace; color: #444; background: #eee; line-height: normal">/Developer/Tools/SetFile -t '(insert type)' -c '(insert creator)' oldfile</pre>
If there's a lot of these you might automate the process using the find command.
Cole -
How do I get rid of the Not Using SoftArtisan File UP notice that is slowing down my uploads to class where I teach? A notice now appears every time I upload an image to class as an attachment that says, Not Using SoftArtisan File UP, and this appears to be slowing down my uploads tremendously. I want to get rid of this. I never used it before and don't need it and don't want it. I just want the uploads to work like they did before this idiotic notice started slowing things down.
Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
Suddenly every other page I go to on Safari, a full-page ad appears instead. I'll close the page, re-try, and the same thing happens. I must have inadvertently installed adware, but I don't know when. How do I get rid of it? Using MacBook Pro, OS X 10.10.3.
Tom in Texas1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a general summary of what you need to do, if you choose to proceed:
☞ Copy a particular line of text to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in safe mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.
If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The test results are on the Clipboard.
Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.
Maybe you are looking for
-
Edit Multiple Images in photoshop cs5
I am trying to apply the same affects thru a action to about 50 some odd photos. I don't want to go thru them individually so how do you do them all at once? Can you convert them to smart objects then apply the action? I tried this but once i want to
-
How to recover the data from a dropped table in production/archive mode
How to recover the data/change on a table that was dropped by accident. The database is on archive mode.
-
I just got an ipod touch 4g and it isn't being recognized in my computer or itunes?
I just bought an Ipod touch and it is not being recognized by my computer or in itunes????
-
My hand is raised. "I can do that!", I shout from amongst the exhausted mommy group at the meeting. Well, guess what? Apparently, I can't. It seemed such a simple task. We're making a flag and wanted to put the kids' faces & names on it. So, I
-
HT1218 Time Capsule is showing error code -6584)
My Time Capsule is showing error code - "An unexpected error occurred (error code -6584)"; can someone tell me what this means? Correlated, Time Machine does not show any backed up data although it says that ~400 GB out of 1 TB is remaining.