How do i get the loops?

Ok, so I am new to GB. When I bring up the loop browser, the loops are shaded (not there) I click on them and it says I need to download them or something, so I did that (downloaded GB update). Still I have no loops in the browser. Do loops not come with GB? Please help me?
Joe

GarageBand 2 is free, but contains only a basic set of three instrument. If you want the full set, it requires an in-app purchse, have you tied that?
See: Expanding GarageBand for iOS 2.0 content with an in-app purchase

Similar Messages

I am using a timed while loop and am unable to get the loop to run at a speed of less than 1ms (I am currently using the Wait(ms) function). How can I get a faster response?

I am trying to create a virtual engine within a timed while loop and am unable to get the loop to run at a speed of less than 1ms (I am currently using the Wait(ms) function). This does not however allow realistic engine speeds. How can I overcome this? I have access to a PCI-MIO-16E-4 board.

andyt writes:
> I am using a timed while loop and am unable to get the loop to run at
> a speed of less than 1ms (I am currently using the Wait(ms) function).
> How can I get a faster response?
>
> I am trying to create a virtual engine within a timed while loop and
> am unable to get the loop to run at a speed of less than 1ms (I am
> currently using the Wait(ms) function). This does not however allow
> realistic engine speeds. How can I overcome this? I have access to
> a PCI-MIO-16E-4 board.
Andy,
Unless you use a real time platform, getting extactly 1 ms loop rate
(or even less) is impossible. It starts getting troublesome at about
0.1 Hz for standard operating systems.
I'd tackle your problem with "if i mod 10 == 0 then sleep 1 ms".
Of
course this is jerky by design.
HTH,
Johannes Nie?

How do I get the Jam Pack instruments downloaded from mainstage 3 to show up in Garageband '11?

I downloaded and installed Mainstage 3 to be able to download the jam pack instruments and loops that come with it and use them in Garageband '11. I read that I can use the software instruments in the program, however none of the jam packs I downloaded show up in the list of software instruments in Garageband.
I clicked on the menu which tells me if I want to display 'Garageband','my settings' or 'All' of the instruments, but no 'Jam Pack' option shows up.
how do I get the jam pack instruments to show up in Garageband? I want to know how you import the instruments in the program.

It looks like nobody here is already using Mainstage 3 with GarageBand, since there is no need to upgrade from mainstage 2 while it is still working. What you are reading here on Mainstage, JamPacks, and GB has been tested with Mainstage 2 but not 3.
Did you download all contents for Mainstage? WIth Mainstage 2 the JamPAcks were part of a separate download. Launch Mainstage 3, and check, if there is a menu entry somewhere that will let you download additional contents. If you do not see any JamPacks directly, they may be bundled with "Logic" or "Legacy" items.
In Mainstage 2 it looks like this. Your version probably has a different panel.
Once everything has been installed, reboot.

How do you get the average of an array bigdecimels

how do you get the average of an array bigdecimels... I am looping through the array in a for loop
for (int i = 0; i < prItems.length; i++) {

int sum = 0;
for (int i = 0; i < prItems.length; i++) {
sum = sum + prItems;
int avg = sum/prItems.length;

How can I get the previous record's field value in a VO

Hi I would like to know how can I get the previous record's field value in a VO
For example : I have a VO porequisitionlinesvoimpl, and it contains 5 records (porequisitionlinesvoimpl.getRowCount() = 5). How can I search all records in the VO and get the field (attribute3) for all records?
Many thanks anyone can help
Lawrence

Hi ,
U can loop through the VO to get the value of attribute3,
need to extend the controller ,use below code
OAViewObject vo = (OAViewObject)oawebbean.getApplicationModule (VO1);
OARow row = null;
int fetchedRowCount = vo.getFetchedRowCount();
RowSetIterator Iter = vo.createRowSetIterator("Iter");
if (fetchedRowCount > 0)
Iter .setRangeStart(0);
Iter .setRangeSize(fetchedRowCount);
for (int i = 0; i < fetchedRowCount; i++)
row = (OARow)Iter .getRowAtRangeIndex(i);
String value = (String)row.getAttribute("Atrribute3");
Thanks
Pratap

How can I get the metronome to click dotted-quarters in 6/8?

When I go from 4/4 to 6/8 the metronome goes hyper (clicks 8ths)
This is annoying. How can I get the metronome to lay back and click dotted-quarters instead?
-Thanks

Working in 3/4 is not a realistic alternative to working in 6/8. Fundamentally, 3/4 and 6/8 are not the same thing at all. Basic music theory 101, yes?
If you want to work with a dot-quarter click, set your time sig to 6/8 as you normally would. Then create your own click track by assigning the Klopfgeist to a track and recording (or penciling in) two dot quarters. One measure will do. Quantize and loop that region. You're done!
\[EDIT] You might want to play around with the pitches and velocities of those two notes, but once you learn which notes (and velocities) sound best you're totally good to go.
This technique (creating your own custom click track) is also useful if you wanted to work in 6/8 but alternate between 6/8 and 3/4 feel. There's an traditional Argentine rhythm (Chacarera) that uses this (thanks Jordito for the reminder of what it's called). There are other examples as well. Anyway, 6/8 is not 2/4 or 3/4. It's 6/8, just like 12/8 is not 4/4, and 9/8 isn't 3/4. My main point is that you shouldn't have to compromise in terms of editing on the grid or anything else just because Logic doesn't give you the click you need out-of-the-box. Work MUSICALLY and get Logic to bend to your will by using the technique above. Or, the one below!
Message was edited by: iSchwartz

How do I get the Interval to keep from repeating after it's used once?

How do I get the Interval to keep from repeating after it's used once? Because I tried clearInterval but I couldn't get it working.
When my code looks like this, with ClearInterval, it refuses to execute my action, which is to change scenes after a short interval:
(Pardon if there is some formating errors, I had to reformat it for the Internet)
Code with clearInterval command
stop();
Kollektiv.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_2);
function fl_ClickToGoToAndPlayFromFrame_2(event:MouseEvent):void{
   gotoAndPlay(29);
   var myInterval:uint = setInterval(fl_ClickToGoToNextScene_14,3000);
   clearInterval(myInterval);
function fl_ClickToGoToScene_14(event:MouseEvent):void{
    MovieClip(this.root).gotoAndPlay(1, "Testside");
However, when my code looks like this it refuses to stop looping:
Code without ClearInterval command
stop();
Kollektiv.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_2);
   function fl_ClickToGoToAndPlayFromFrame_2(event:MouseEvent):void{
   gotoAndPlay(29);
   setInterval(fl_ClickToGoToNextScene_14,3000);
function fl_ClickToGoToScene_14(event:MouseEvent):void{
    MovieClip(this.root).gotoAndPlay(1, "Testside");
Any ideas? Also, feel free to dumb your answer down, because I am completely new to Flash, Actionscript and coding.

If you insist on using setInterval - you need to declare interval id in a higher scope so that you can clear it later:
stop();
var myInterval:uint;
Kollektiv.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_2);
function fl_ClickToGoToAndPlayFromFrame_2(event:MouseEvent):void
          gotoAndPlay(29);
          myInterval = setInterval(fl_ClickToGoToNextScene_14, 3000);
function fl_ClickToGoToScene_14():void
          clearInterval(myInterval);
          MovieClip(this.root).gotoAndPlay(1, "Testside");
I suggest you use Timer instead:
stop();
import flash.events.TimerEvent;
import flash.utils.Timer;
var timer:Timer = new Timer(3000, 1);
timer.addEventListener(TimerEvent.TIMER, fl_ClickToGoToScene_14);
function fl_ClickToGoToAndPlayFromFrame_2(event:MouseEvent):void
          timer.start();
          gotoAndPlay(29);
function fl_ClickToGoToScene_14(event:TimerEvent):void
          timer.stop();
          MovieClip(this.root).gotoAndPlay(1, "Testside");

How do I get the statistics express to read more than 10 segments when reading from a .lvm

I have tried 2 ways of doing this. I had an for loop set up with a "Read labVIEW Measurement FIle" then a xy chart to plot the 2 measurements vs. each other. The chart works and will plot everything great but the "Statistics" express will only take 10 samples at a time and will keep redoing the statistics for each subsequent segment of 10 samples. I tried to change this to a while loop but then the same thing happens with the stats and the xy chart does not graph. How do I get the stats calculate for the entire file?

Richard,
Thank you for contacting National Instruments. I think I understand what you are looking to do here, but it might be easiest for myself and others to help you more specifically if you post a screenshot of your code, or your actual VI. However, I looked into trying to achieve something similar, and used a loop structure to bring the information in from a file. Then, outside the loop, I used the Statistics Express VI from the Mathematics palette to obtain some statistical values. What type of statistics are you looking to receive from this program?
Jason W.
National Instruments
Applications Engineer

How do I get the latest download of itunes for windows 7

So I have windows 7 and I've got the notification for the latest up date for iTunes and I tried to download it several times but always said error. So I decided to uninstall it and install iTunes again but now when I'm trying to reinstall it, my computer says it already exist in my computer when I've uninstalled iTunes and deleted all files linking to it and yet it still says that iTunes exist. What should I do now I cant live with out my iTunes???????

Dear Sir: I would like to drop me your forum. My PC
Spoiled I do not know when I fix it I do not want to receive e-mails more.
Thank you,
2014-09-23 13:00 GMT+03:00 Apple Support Communities Updates <
[email protected]>:
                New discussion activity      *Pobblebonks
<https://discussions.apple.com/people/Pobblebonks?ac_cid=tw123456>* has
posted in the iTunes for Windows community.            How do I get the
latest download of itunes for windows 7
<https://discussions.apple.com/message/26672502?ac_cid=tw123456#26672502>
Which internet browser are you using when trying to download iTunes 8 ?
(Mozilla Firefox, Internet Explorer, Google Chrome, etc.)
          To post a reply, go to the discussion
<https://discussions.apple.com/message/26672502?ac_cid=tw123456#26672502>
in Apple Support Communities.        You are receiving this email from
Apple Support Communities. You can change your email preferences in your Apple
Support Communities Profile
<https://discussions.apple.com/user-preferences!input.jspa>. TM and
copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014. All
Rights Reserved <http://www.apple.com/legal/> | Privacy Policy
<http://www.apple.com/legal/privacy/> | Terms of Use
<https://discussions.apple.com/docs/DOC-5952> | Apple Support
<http://www.apple.com/support/>
>
<Edited by Host>

How can you get the keypad on a USB keyboard to work in Excel

How can you get the keypad on a USB keyboard to work in Excel for Mac. Mouse keys is disabled/unchecked, but cannot get it to work. Even tried downloading a 'num lock' app and it didn't help.

Hi Michael-
I do not have any problem with using shift registers in timed loops. What version of LabVIEW are you using? Can you please elaborate on why neither shift registers or local variables meet your needs? I have attached a VI that saves a previous iteration and then computes and displays the difference. Let me know if you have problems running it.
Thanks-
Tom W
National Instruments
Attachments:
TimedLoop_ShiftReg.vi ‏74 KB

OK_ How do I get the music to span over the course of my slide show?

I can only seem to get music onto one image at a time-- how do I get the same song to continue from slide to slide as it plays? Please HELP LOVE MJ

Go to the Inspector, then the Document tab, then the Audio tab. Within the window there is a section where you can choose a soundtrack for your presentation. You can chose to loop the song or to play it once, or to turn it off. You also gain volume control in this panel for the song as it goes through your presentation. Note, you need to drag your song out of the media browser and into the square window in the to left corner of the Audio tab in the Inspector.

I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

How can i get the all values from the Property file to Hashtable?

how can i get the all values from the Property file to Hashtable?
ok,consider my property file name is pro.PROPERTIES
and it contain
8326=sun developer
4306=sun java developer
3943=java developer
how can i get the all keys & values from the pro.PROPERTIES to hashtable
plz help guys..............

The Properties class is already a subclass of Hashtable. So if you have a Properties object, you already have a Hashtable. So all you need to do is the first part of that:Properties props = new Properties();
InputStream is = new FileInputStream("tivoli.properties");
props.load(is);

I accidentally erased a music album that I purchased on iTunes. How can I get the iTunes store to recognize that it is no longer in my iTunes library and download it again?

I accidentally erased a music album that I purchased on iTunes. How can I get the iTunes store to recognize that it is no longer in my iTunes library and download it again?

Delete the broken links in iTunes then look at your purchased list to redownload.
If this happened because you were deleting files from the iTunes folder in Finder, don't. You have to let iTunes do all the deleting and moving or you will end up with broken links.

How can I get the iCloud/iTunes password for my (now) deceased Father-in-Law's Imac? I have a list of his passwords, but nothing works!

How can I get the iCloud/iTunes password for my (now) deceased Father-in-Law's iMac? I have a list of his passwords, but nothing works! I know his email, but that account has been cancelled for security purposes, so we can't just request a new one. I tried his security questions to no avail.
Thanks

Since that password is tied to his Apple ID, you will need to contact Apple; as far as I know, it will be a somewhat lengthy procedure and you will need to furnish necessary paperwork (including a death certificate as far as I know). Best to either stop at an Apple store or call them to find out exactly what it is you need to do.

How do i get the loops?

Similar Messages

Maybe you are looking for