How do i give dvd-r's best chance of working in majority of dvd players?

i got a bunch of dvd's made last year of our 10 minute short film and since then have been trying to make my own copies that are anywhere near as reliable as those copies we had 'professionally' made...
can anyone give me top tips on how to get the best possible burnt dvd's out of my g4 mac?
ive currently got a pioneer 104 drive but am thinking that an upgrade may do a lot to help the dvd's made wi9th this machine be more reliable.. but im not sure?
im already burning them at 1x speed and was using rebranded TY dye dvd-r's but since we've been told about a few compatibility issues ive tried Verbatim 16x dvd-r's which actually seem to be worse!
that has just confused me... and now i dont know what to do to improve the situation... new drive? the best disks? just pay the extra and get it done professionally? (but what can they be doing that differently?)
thanks all

Hi
One issue is media compatability with such an "old" drive. Anything faster than 4X will probably be unreliable, if the drive can even burn it @ 1X.
You can get a new DVR-110D or ND-3550A for ~$40 online, it will cost you less than in media experimentation trying to get the right combination for your existing drive.
Search discussions for either model#; depending on your specific model G4 you may need to remove the drive tray faqceplate, run patchburn, etc., all covered in other threads..
You will still want to burn @ a low speed, but you won't have the media issues you are currently experiencing.

Similar Messages

How can I give my application to client? I work with Access 97 and use SQL Toolkit 5.0. NI must sell one license to client for distributed this application.

Thanks,
Jorge.

Hi Dennis,
But I must install SQL Toolkit 5.0 for execute my application (.EXE), in other hand my application generate errors. But I can't give an installer application to client, if is neccesary install SQL Toolkit.
Thanks for your time,
Jorge.

DVD Remote Control buttons don't work when using regular DVD player

I created a DVD using DVD Studio Pro (version 3.0.2) and am unable to navigate through any menus or buttons using the DVD players remote control. I can press the play button on the actual DVD player and play the movie. How can I fix this issue? Any suggestions would be helpful!
I never changed the default setting on the file I made and the DVD works just fine in the simulator as well as any computer DVD player. Also, is there a way to make sure the DVD will play on all DVD players even if it doesn't read burned DVDs?
Thanks for the help!

Not sure if I can add anything here - you're in good hands! I'd like to know how you constructed the menus - did you use photoshop layers for the background and overlay, or did you use a pict file? Are these motion menus or static?
About the compatibility - a burned disc will only ever be about 85% compatible with the number of DVD players out there, and if a DVD player states that it cannot read from DVD-R or DVD+R discs then it most likely won't play your disc. The only way to approach full compatibility is to have the disc replicated, but the cost of this usually means it is not worth while for anything less than 500 to 1000 discs at a time. If you are using DVD±R then all you can do is take steps to make sure the disc is as compatible as it can be, such as keeping the MPEG encode less than 7.5MBPS, using AC3 audio, not applying paper labels and so on.
Compatibility is getting better in general, this summer I have burned in excess of 90 individual projects on DVD-R (and duplicated each one up to seven times each) for playback on consumer players and only one came back (so far). When I looked at it there was a chunk missing from the surface of the disc, which probably explained the error!

DVD menu doesn't work on the finished DVD

Please, I need some help.
I am having problems with a DVD menu.
Several days ago I burned a DVD from the same project that I tried to export to DVD today, and I did not have any problems with DVD menu, but today, when I start to burn DVD it shows me a warning sign that tells a few DVD markers are closer than they are required, and after burning DVD the DVD menu doesn't show or work on the finished DVD. What am I doing wrong?
Robert

Look here: http://www.adobeforums.com/webx/.1dea22a5/

Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job

Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job

You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion or later:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion onwards, however MPEG Streamclip still needs it. See this:
http://support.apple.com/kb/HT3381
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. (The same applies to Mountain Lion even though that has it preinstalled.) You don't have to install QuickTime 7.

Re: How do I file a complaint to Best Buy?

I need help!!!!!!!!!!!!!!!!!!!!!1
How do I start?? Simple is best!
#geedsquad #bestbuy
Geeksquad Service Protection Plan #{removed per forum guidelines}
10/23/14 - Started process for broken device at the Best Buy in Garner, NC - After NOT RECEIVING the shipping box from #ups, another trip to Best Buy in Garner, NC.
11/5/14 - Shipped broken device as PER INSTRUCTIONS
From 11/9 to 11/15 my son called several time with NO RESOLTION. He actually needs his phone FOR WORK!!
11/16/14 Theresa {removed per forum guidelines} - customer service rep - nice lady, spent a lot of time trying to get me answers. I felt she really wanted to help.
After over 1.5 hours on the phone NO RESOLUTION! A promise to call back - NO CALL BACK!!!!!!! NO RESULOTION!!! EMPTY PROMISES AGAIN
11/19/14 3:15 PM - Leon - customer service rep - HORRIBLE CUSTOMER SERVICE!
I ask Leon to get his manager on the phone (he said his name was Malcom). He would not get his manager to the phone and was a shining example of HORRIBLE CUSTOMER SERVICE!
11/19/14 3:36 PM - Cassandra - customer service rep - nice lady who quickly recognized she could not help and "bumped" me to another rep.
1/19/14 3:40 PM - Mira - HORRIBLE CUSTOMER SERVICE! Repeated every word I said trying to understand ENGLISH! I asked to be "bumped" up several times....finally she did.
11/19/14 3:45 PM - Ernie - Mira's so called manager (at least he understood ENGLISH). After 10 minutes of telling me I had the wrong information, Ernie informed that he couldn't help me and bumped me up.
11/19/14 3:59 PM - Bob - nice guy who took the time to read through the file, THEN informed me that there was no "active service" for this account. Bob then put me on hold and called Best Buy in Garner, NC. After talking to Best Buy in Garner, NC, Bob tells me that I will get a call back in 24 to 48 hours.
NO CALL BACK!!!!!!!!!! CALLED ENDED AT 4:51 PM ONE HOUR AND 45 MINUTES - NO RESULOTION!!! EMPTY PROMISES AGAIN
11/21/14 5:24 PM - Marchele - customer service rep. Marchele tells me that this is the responsibility of both #geeksquad and #bestbuy and then supposedly is going to transfer me to "someone higher", after waiting 10 minutes or so ....I was promptly hung up on!
11/21/14 5:46 PM Beverly - customer service rep. Beverly also is going to transfer me to "someone higher", after waiting several minutes ....I was promptly hung up on AGAIN!
11/21/14 6:08 PM Khonisa - customer service rep - This lady really put forth effort. She gave me a Case ID 148203353 and also got a supervisor on the phone (Mary). Mary (not knowing I was on the line) asked Khonisa why she had called her and who told her to call ext 200? Khonisa then, trying to help me, explained the issue to Mary........So I was eventually told by Mary that I need to direct this back to the Best Buy store in Garner, NC. Mary told me that "Sara" at Geeksquad Mobile was aware of all these problems.
11/21/14 7:00 PM (I think) Called Best Buy in Garner. Eddie answered and said that there was NO Sara. I explained my latest conversation with Mary. Eddie told me that Nichole (his manager) knows about this and she'll be in tomorrow at 11:00. Not believing anything at this point, I asked if I could talk to someone in "Mobile". Alex, Mobile Manager, got on the phone. Alex informed me that he DOES have a Sara, but she has NOTHING to do with this and tells me to call back tomorrow.
11/22/14 11:19 AM - Nichole, Geeksquad manager at Best Buy in Garner, NC
Nichole said she was aware of this situation and ask if she could return my call.
11/22/14 11:40 AM - Nichole, Geeksquad manager at Best Buy in Garner, NC
Nichole tells me that I need to call 866-205-4388 and that if I didn't get a resolution to call her back.
11/22/14 11:55 AM - "WAIT TIME IS 20 TO 30 MINUTES"
11/22/14 12:28 PM - Bani - customer service rep.
Bani tells me that he cannot see any service order in the system for this issue. He states that he "doesn't have backdoor access" and only the Service Center has back door access to see all the information needed. Bani then STATES "it looks like someone at the store (Best Buy in Garner, NC) CANCELED THE SERVICE ORDER. Bani tells me that someone from the Service Center will have to call me back and that the Service Center will have to make a NEW Service Order. He asked a couple of times if there was more than 1 phone on this Protection Plan......NO there is not! Bani tells me that I will get a call back in 24 to 48 hours.
EMPTY PROMISES AGAIN
11/22/14 12:43 PM - Nichole - Geeksquad Manager at Best Buy in Garner
I relay all the info from my last call to Nichole. She tells me that she is going to talk to her General Manager, Mike {removed per forum guidelines}, as soon as he get out of New Employee Orientation. Nichole seems genuinely concerned about this problem and asked that I give her time and she will call me back. Ended call at 12:57 PM.
11/22/14 4:00 PM (I think) Voicemail from Nichole stating that I need to call someone else. ***At least she called back!!
11/22/14 6:00 PM - The number I was asked to call routed me to CANADA! Julian (in CANADA) said he didn't know why I was calling him and transferred me to someone else - Jennifer.
11/22/14 ?? PM - Jennifer said that she COULD NOT RESOLVE this issue and gave me yet another Case ID {removed per forum guidelines} with a PROMISE TO CALL BACK IN 24 TO 48 HOURS. NO CALL BACK!!!!!!!!!! NO RESULOTION!!! EMPTY PROMISES AGAIN
11/26/14 10:50 AM - Ann - customer service rep. After reviewing this file, Ann could find NO SERVICE REQUEST. She recommend that I go to BestBuy.com and use the "contact us" to let them know about the issues. She then told me to expect a call back in 1 to 2 business days. Ann also gave me yet another Case ID {removed per forum guidelines}.
11/26/14 12:44 PM – Nichole, Geeksquad Manager at Best Buy in Garner, NC Nichole said that the order needs to be “recreated”. This CANNOT be accomplished because they already have the phone which Nichole agreed. Nichole is to once again call someone in the corporate team……. Called ended at 12:57 PM

Bill,
NO PHONE, NO SOLUTION AS OF TODAY 12/9/14
You can add this to the previous post. All the information should flow time wise. I'm pretty sure I'll not hear back from you, since everyone is too busy to take ownership of this problem. This started WAY before Black Friday and continues WAY after Black Friday. I responded to Derald......AT NO TIME HAS THIS ACCOUNT BEEN IN QUESTION. An address change at the bank was needed on the card. Even IF this account had not been paid in December IT WOULD NOT AFFECT THE OCTOBER REPAIR! How dare Best Buy use that tactic as yet another ploy!
11/26/14 – As of today after I posted to Facebook Brian {removed per forum guidelines}, Market Service Manager, is aware of this issue. Brian {removed per forum guidelines} is obviously someone with enough clout to resolve this issue (I believe he is a regional or district manager).
Email sent:
Sent: Wednesday, November 26, 2014 3:56 PM To: '[email protected]' Subject: Need help!!
11/28/14 ?? PM - I called Nichole at Best Buy in Garner, NC. Nichole was too busy to come to the phone. I was told she would try to call me back tonight or tomorrow.
11/29/14 1:09 PM - Nichole returned my call from Friday and left a message. She apologized for not getting back in touch with me yesterday (Friday). Nichole said she has yet to hear anything back from the escalation team.
12/1/14 2:43 PM – Nichole is at lunch. I asked to speak to Michael {removed per forum guidelines}, GM for the Best Buy in Garner, NC. Michael is not in today. – I left a message for Nichole to return my call.
From: Facebook (Best Buy) [mailto:[email protected]] Sent: Monday, December 1, 2014 2:14 PM To: Jacqueline {removed per forum guidelines} Subject: RE: Need help!!
Hello Jacqueline,
Thank you for contacting us. I am sorry to hear about the issues with having the phone serviced. I have a couple of questions for you before I proceed. Under whose name is this phone and the Geek Squad Protection Plan and is their monthly payment plan up–to-date?
Please reply at your earliest convenience. Thank you.
Derald, Social Media Specialist
ECC Social Connections & Innovation
Best Buy Co., Inc.
Reply Email:
From: Jacqueline {removed per forum guidelines} Sent: Monday, December 1, 2014 3:35 PM To: 'Facebook (Best Buy)' Subject: RE: Need help!!
This phone is in the name of: XXXXX
The phone number associated is: 919-XXX-XXXX (please refer to any of the Case ID numbers below)
There is NO MONTHLY payment for this plan.
****Derald asked that I “Please reply at your earliest convenience”. Wonder how inconvenient it is to resolve this issue for these folks!!
12/1/14 5:05 PM – Nichole called me back. Nichole has still NOT received any information to be able to resolve this issue. Nichole is THE ONLY PERSON at Best Buy or Geeksquad that has bothered to contact me or help me in any way. Her hands are obviously tied.
12/2/14 Michael {removed per forum guidelines} – I CALLED, yet again, to the Garner, NC Best Buy and asked for Nichole. After being on hold quite some time, Michael {removed per forum guidelines} come on the line and tells me that he has NO NEWS about this problem!! Nichole has obviously sent my call to him rather than answer me. Michael states that he WAS GOING TO CALL TODAY (this call was made late afternoon). Still no phone OR anyone with enough sense to be able to get through the system and figure this out.
12/2/14 4:45 PM – Nichole calls me and tells me that XXXX’s credit card needs to be updated in order to process this claim…….WHAT?????????? So, we run to the bank before they close (note the time) and get the credit card address information updated. We have recently moved and I have been telling whoever I talk to about that in case the REPLACEMENT phone had been sent to the wrong address. REMEMBER, the first empty box came to the NEW ADDRESS. Also, I gave the NEW ADDRESS to Michael {removed per forum guidelines} yesterday!!!
12/2/14 5:?? PM – I called Nichole to let her know that the credit card address had been updated today. She was looking for a way to email someone to let them know, because she had NO OTHER way to contact the escalation team, no phone number…..REALLY?
12/3/14 Response from an 11/26 post:
Bill-BBY
Senior Social Media Specialist
Posts: 3,983
Topics: 279
Kudos: 153
Blog Posts: 18
Solutions: 171
Registered: ‎10-10-2012
Re: How do I file a complaint to Best Buy?
‎12-03-2014 02:47 PM
Hello jlippard-
I absolutely apologize for the lateness of this response. We are extremely backlogged from the holiday and Black Friday and trying to catch up.
It certainly sounds like you are experiencing an extremely frustrating situation and I am truly sorry to hear about the issues going on with your phone. I saw that you had also reached out to us through our Facebook channel and my colleague Derald was able to respond to you. I believe that he is waiting on some information from you to proceed, so if you have not yet replied to him, I would encourage you to do so. Hopefully he can help you sort this all out and reach a resolution for you.
Thanks for connecting with us.
Sincerely,
Bill
Seems they are too busy (really, since October) to handle this and one hand doesn’t know what the other hand is doing. I had already responded to Derald and have received NO RESPONSE BACK.
12/5/14 – Afternoon – STILL NO PHONE HAS ARRIVED AND NO ONE HAS CALLED! I called Nichole, Geeksquad Manager, Garner, NC Best Buy. Note that Nichole is the MANAGER! Nichole has received notification that they are TRYING TO SOLVE THE ISSUE! I’m very angry at this point! Up until this call, I have been very respectful AND extremely patient! I said to Nichole “what do I need to do at this point, call the media? WRAL 5 On Your Side? This is BEYOND belief! THE ABSOLUTE WORSE CUSTOMER SERVICE I HAVE EVER ENCOUNTERED! Nichole agreed that I have been respectful and patient and that SHE would also be very angry. Nichole said she would be angry as a Mother and as a customer.
12/8/14 - WELL BLESS MY SOUL! A package arrived today to the OLD ADDRESS! The box is EMPTY, NO PHONE! Nichole had previously told me that the “escalation team” was going to RE-CREATE” the service order. Nichole told me this WOULD NOT WORK BECAUSE THERE IS NO PHONE TO RETURN. They already have the phone! I call Nichole, Geeksquad Manager, Best Buy in Garner, NC. Nichole, with an big ‘ole attitude, tells me that because I said I needed to contact the media, she could no longer discuss this with me or help me. Nichole told me to call 1-888-Bestbuy.
12/8/14 4:04 PM – 888-BestBuy - Rebecca in sales department. Rebecca put me on hold for a bit trying to get a manager to help me. She was obviously concerned after pulling up this account and seeing just how bad the customer service has been. With Rebecca being in sales, I guess she gets it. Rebecca hands me off to Catherine. Catherine apologized for the way I’ve been treated and seems to be very concerned about this as well (some I’ve spoken with seem concerned, but NO ONE can ACT – the GM in Garner NEVER SEEMED CONCERNED). Catherine tells me that it would be a good idea to go to the UPS store and get them to track the phone sent on 11/5/14! Really…we have been told the phone was received! We have also been told the serial number did not match…….. Catherine tells me that it is NORMAL that the serial number doesn’t match if there has been prior repairs (which there has been). ANOTHER PROMISE TO CALL BACK IN 24 TO 48 HOURS. Another day……….. NO PHONE, NO RESOLUTION!
47 DAYS, 30 documented phone conversations (some not even documented), MANY EMPTY promises of a CALL BACK, Delayed or NO email responses and COUNTLESS hours (mine and theirs) NO RESOLUTION from anyone!!! Paying for a SmartPhone plan for going on 2 months with NO SMARTPHONE! The amount of time they have wasted taking my calls would equate to just giving me a new phone! My time would equate to 3 new phones. The amount spent on a phone plan service that can’t be used is ridiculous. This Geeksquad plan is and has been in good standing for the entire duration of this issue. The madness just doesn’t stop!
The amount of money WASTED on this one issue is unbelievable! Corporate Best Buy and Geeksquad are spending untold thousands of dollars with POOR MANAGEMENT such as this and passing on the expense to the consumer!!
If you're planning on shopping/purchasing at #bestbuy or using #geeksquad this holiday season, consider this post on customer service. Imagine how you would feel if a family member or friend had to deal with this type of service, especially for a gift!!!

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used? So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I ca

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?
So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I can apply the same burn properties to a project in Compressor 4?
Is it possible to see what iDVD did?

I don't know any way you can interrogate iDVD to reveal settings to the extent that you can in a Compressor project. What you could do is open up the show's VOB in MPEG STreamclip, go to File and Reveal Stream Information; that will at least give you some rudimentary info like average bit rate. Perhaps someone, with more iDVD experience, can chime in here.
The broader question is why use Compressor at all if your current workflow is doing the job to your satisfaction?
The value of Compressor is that it gives you control over the many parameters that affect size quality. and playability. The Compressor presets can give you a starting point for DVD delivery, Web, etc. From those presets, people typically experiment by adjusting the parameters until they get the desired results for their specific show. It's a little bit science and a little bit art. After experimenting, you may be able to get slightly better quality for the project you've successfully burned in iDVD by using Compressor and something likeToast…or maybe not.
Good luck.
Russ

Please tell me the soluation How can I give the soluation bilow issue.

Dear Experts,
Please tell me the soluation How can I give the soluation bilow issue.
Currently user are facing one problem with respect of Line item report.
In any of the line item report (i.e. FBL1N, FBL3N, FBL5N) we want to view header reference as column data wonu2019t appear in any of the reference filed.
For Example in Bank G/L Cheque number was enter in reference field but same is not apear
In Sales G/L or tax G/L invoice number is to be appear which is again invoice number as reference in document.
Regards
Devendra.
Moderator: Give proper titles to your threads

Hi,
To add Reference field in line item report do below.
From FBL1N output screen.
Click change layout / (clr + F8)
Now add Hidden field u2018Referenceu201D to column content and push copy button.
Now you should be able to view reference field (BKPF- XBLNR) in line item report.
Best Regards,
Raju

In Flash CS4,How can I give a AS3 List Component a suitable horizontalScrollBar

In Flash CS4 when an AS3 List Component has too many rows,it will has a verticalScrollBar automatically. but it will never has a horizontalScrollBar even a part of the content of the list is hidden.
I set the property list.horizontalScrollPolicy="on",and set list.maxHorizontalScrollPosition=200; then the horizontalScrollBar appear
but when I click the item of the list, all the list move to left, half of the list is hidden,
I can only see the right part of the list, the I click the list again,the list move to right,then I can see all the list by move the horizontalScrollBar
How can I give a suitable horizontalBar to the AS3 list component?

Thank you for your help! (sorry,I`m bad in English...)
In fact, it works.
but,I made a mistake,the reason I want to give a list a horizontalScrollBar is:I want to show all content in a list that is not wide enough,
you see,first row can show all content in this list,but in the other rows,the content is too wide to show,I want to give the list a horizontalScrollBar to show all content by draging the horizontalScrollBar to right.
now,set property:
list.horizontalScrollPolicy="on", list.maxHorizontalScrollPosition=30;(the result is the image above),when I drag the horizontalScrollBar to right:
ah ha ,the row can`t show all content too,the horizontalScrollBar is related to the width of all the list, is not related to the width of the content in every row.
now I kown why the horizontalScrollBar is always disable.
but in design,to show a lot of content,we can`t draw a list too wide, it`s not beatiful,so I want to use a horizontalScrollBar to show all content in every row.
and the list is not too wide
ah ah, like the list in Flex4
In fact,ah,I have not studied Flex 4,so,I have to make it by using Flash CS4 Component
How can I do? Please
(so sorry for my bad English,I do my best in it)

Best export settings for HD video to DVD

hello, I now use premier pro cs5, from cs4 on my mac, love it, but I shoot with a cannon XL H1s HD video, my questiion is when viewing video from camera or on the screen in cs5, perfect hd picture, but when I export to DVD, i see in the media encoder if I choose mpeg2-DVD it goes output to 720x480, how do I export to dvd for the best HD seetings for DVD to get a HD playback on the DVD, now I see an OK video on the TV playback, but not the same as the original recording, can anyone help,, thanks in advance for any help.....

I found (via a friend who is experienced in Pr & En) that it all comes down to the export/authoring settings.
In Pr, my export settings needed to be adjusted as follows:
Format: MPEG2-DVD
Preset: PAL Progressive Widescreen High Quality
Selected 'DVD' in the Basic Settings section of the
Multiplexer tab (this creates a single mpeg file rather than a m2v file which has a separate video and audio file)
Selected the highest possible quality (5) in the Basic Video Settings section of the Video tab, changed the TV Standard to PAL (to suit Australian TVs) and then
Set the minimum/target/maximum bitrate settings to 8Mbps (when I set it at 9Mbps, the final file had too high a bitrate for DVD)
In the Audio tab, I selected PCM as the audio type.
I also ensured that the Use Maximum Render Quality checkbox was ticked at the bottom of the export settings window.
Then I exported.
Once encoding was complete I opened Encore, started a new project, selected DVD as the authoring mode and PAL as the Television Standard within the Basic settings for the new project. I then imported the final mpeg file as a timeline into Encore, set all the appropriate first play/title button/end play functions as necessary, then I opened the Edit Quality Presets window from the File menu and made the following settings;
Format: MPEG2-DVD
Presets: PAL DV High quality 8Mb CBR 1 Pass
Basic Video Settings - Quality: set to maximum (5)
Basic Video Settings - Field Order: None (Progressive)
Basic Video Settings - Pixel Aspect Ratio: Widescreen 16:9
Basic Video Settings - Bitrate Settings - Bitrate [Mbps]: set to maximum (9)
Basic Audio Settings - Audio Format Settings: Audio Format: PCM
click OK
Then I authored the DVD and was quite pleased with the result. Still not quite to the quality I was hoping for (i.e. the quality of a DVD movie), but still a significant improvement on my initial attempts using default Pr & En settings.
Hope it helps

Best video Hardware/software for converting VHS DVD and others on Mac?

Hello,
I am having problems finding some much needed details on what the best software/hardware is for converting video formats on a Mac. I should note I am using a NEW iMac 4GB memory and Leopard OS so what I use needs to be compatible. Perhaps next year I will get a Mac Pro, but for now I'm using this setup. Here's is what I need to do:
1. Transfer old VHS tapes (home movies and such) to DVD. I need to be able to use DL DVD discs for my recordings so I don't have to switch DVDs. In other words make them just like the DVDs you play that you buy. Therefore, they also must be able to playback in home theater DVD players, not just on the computer. I would assume the best way as for encoding is to get the VHS tape in digital format on the hard drive, then use the codecs to turn them into DVDs?
2. Once on the hard drive I also need to convert them to a format neutral playback on both the Mac and PC. What is the best, MPEG 4?
3. The ability to do some nice editing of making bookmarks, chapters and thumbnails for the DVD menu and divisions I wish to make. In other words, if I have a home movie containing my Summer and Winter vacation, I want to insert bookmarks at points to skip to like in a movie DVD and also have a thumbnail of it just like DVD movies does.
4. A nice MAIN menu for the DVD that will let me hit the main categories, not just chapters for the TOP level DVD menu. Such as Summer Vacation, Winter vacation.
5. The software should be easy to use so I don't have to take a HUGE crash course requiring lots of work making the project a chore. Also, I don't want or need a professional package, just something simple that is less than $200 per software program. Not the expensive $500+ software options for movie makers.
Thank you for any tips and advice on this matter.

"Best software/hardware" depends on your exact needs & wants.
One simple way to transfer your VHS tapes to DVD is with a *DVD Recorder*. Many of these come with VHS and DVD decks already built in. Insert your VHS tape, a blank DVD, hit record and off it goes. When finished, you have a playable DVD.
To transfer your VHS tapes to DV for editing you will need a converter. The *Canopus ADVC-110* is a very nice, relatively inexpensive device that will do that job for you. (It's also possible to use most modern DV camcorders as converters, too.) You would connect your VHS deck to the Canopus box via their analog video & audio connections, then connect the Canopus box via FW to your Mac, and then when you play the VHS tape you would capture the video in iMovie or FCE.
Once your videos are captured on your Mac, you could use iMovie or *Final Cut Express* to do whatever editing you might want to do. Regardless of which one you edit with, however, it's iDVD that you would use to create your DVD menus and burn your DVDs.
So, overall, the workflow would be like this: *VHS Deck > Converter (camcorder or converter box) > Capture on Mac (iMovie or FCE) > Editing application (iMovie or FCE) > iDVD > DVD*
For playback on computers MPEG4 would be an ok choice, H.264 is probably a better choice, and then there's the matter of whether or not you want to export as a QuickTime movie and/or AVI.
iLife came with your Mac, so you already have iMovie and iDVD. How about giving them a try before you consider investing in a significantly more sophisticated application like Final Cut Express. (just my opinion)

Why do I cancel my order? How can I give.

Order Number: W4*****997Why do I cancel my order? How can I give.
<Edited By Host>

Hi moca78,
I'm sorry that your subscription wasn't what you expected. I looked at your account and saw that the order is still processing. As such, I can't cancel the order myself. Please contact Adobe Customer Care; an agent will be able to take care of the cancelation/refund for you. Here is the contact information: Contact Customer Care
Best,
Sara

SL:How do I give the Admin account premissions to access other accounts?

How do I give the Admin account the permissions needed to read and write the folders desired in the other account(s)?

hassiman wrote:
I have a MacPro running Tiger and for whatever reason when I am logged into the machine with my user account which has Admin privilages I can open/drag and drop etc. from my desktop to my wife's account ( which I set up as limited with parental restriction to only what she needs to access and use.)
a parental controlled account for your wife. you must have an interesting relationship...
I am setting up a Mac Mini running SL for my 90 year old in-laws and it was my intention to give them a STANDARD user account so that they can not download and install anything nasty which they did all the time on the Windoze machine the Mini is replacing. I have set up an Admin account on the machine so I can install stuff and perform maintenance functions VIA VNC connection from San Dieg to them in NYC... But I was surprised when I could not access any folders on their account... specifically their desktop where I tried to drop a file.
Not sure why it's no biggie on Tiger but Leopard's throwing a fit. Any ideas?
this is quite normal and is the default in all versions of OS X. a user has write access too their own home directory but not to any other users home directories. being an admin user does not change that. as an admin user you can give yourself write writes to it as discussed earlier but that won't happen by default. the best thing to do in the situation you describe is to log in as your in-laws once you vnc into their computer. then you can copy what you need to the desktop. it's of course possible to do it from the admin account by giving it write access to their desktop as you were intending but that will give you extra problems later because their users won't have write privileges to anything you copy that way.

How can I give an user the right to change passwords

I'm still absolute server beginner, so I have to ask here.
How can I give users the right to change passwords or to view calendars?
I didn't find it, yet.
I've found an option to change rights, when I click on the user with two fingers (right mouse button). But all options in this menue are grey.

Hi Holger,
These are two fundamentally different issues. I'll try to address them each. For both you will need to have OpenDirectory set up (see the Users Next Steps list in the Server app). Once that is done. Additionally you will need the Server Admin Tools 10.7. Once you have them installed, you can specify the OpenDirectory password requirements for users
User Passwords in OpenDirectory
On the server, open Server Admin app.
Connect to you server, then click on the OpenDirectory service.
Click on the Settings icon.
Click on the Policies tab.
Click on the Passwords sub-tab, and you can set all the criteria for password requirements here.
Resetting Passwords
Users must log in as network users on the client computer.
Once logged in, to change the password, open System Preferences.
Click on Users & Groups.
The user icon will be a silhouette with stars in the background. This means it is a network user. Click on the Password tab at the top.
Click the Change Password ... button to change the password.
Calendars in iCal are much like RSS feeds: users need to subscribe to them, like we discussed in our other posting. Network users will automatically be given a network iCal calendar, and will be automatically subscribed to it. However, if you want to automatically add subscribed calendars to network user's accounts, you will need to use ProfileManager.
On the server, open Server app.
Click on the Profile Manager menu item.
Make sure that iCal service is running (green indicator next to it). Click on the "Include configuration for services: ...". Make sure the iCal icon is listed there.
Click the "Sign configuration profiles" checkbox.
Turn Profile Manager on.
Once Profile Manager has loaded (the gear at the bottom right will no longer be spinning), go ahead and click the Open Profile Manager link.
Log into Profile Manager as your directory admin user.
Click on the Groups menu item to give all users of a specific group access to the wiki calendar. This is best if you have a wiki for a group and want to share that calendar. Use the Everyone group to add this calendar for all users.
Click on Users to give access to only specific users.
Edit the profile for the group(s) or user(s) you selected by highlighting that group and clicking the edit button.
Scroll down and select the CalDav item on the left.
Click configure. Here you will need to enter the specific details for that callendar based on the subscription details you get when subscribing to the calendar via the wiki.
After all that you still need to configure each client computer to be set up for profile management, which really is a topic of its own. I recommend the following tutorials:
Installing OS X Lion Server
OS X Lion Server Administration Tool Tour
Setting Up Profile Manager on OS X Lion Server
Using Profile Manager on OS X Lion Server
Hope this helps, good luck!
~Mike

I have three videos to edit.How do I save each one so I can burn them together to a DVD?

I have three videos to edit. How do I save each one so I can burn them together to a DVD?

Use Share/Computer/AVI to output each video as a DV-AVI.
Then open a new project set up for DV and combine the three AVIs on that timeline. Voila!

How do i give dvd-r's best chance of working in majority of dvd players?

Similar Messages

Maybe you are looking for