How do I highlight or color duplicates in a very long list?

I have a very long list of items
some of them are duplicates.
There are all in one collumn.
In excel there is a funciton that
allows me to highlight cells that
are duplicates.
Is there an equivalent way to do
that in Numbers?

yegyan wrote:
too bad theres no way to do it without
adding a new collumn
yy,
The entire process of creating the example and posting it here took a couple of minutes. Less time, I'm sure, than it would take me to figure out how to find duplicates in Excel if I was still an Excel user. It's what you plan to do with the information on duplicates that will take the bulk of the time, I think.
Step by step (for column B):
Click on a cell in the data column
Type Option-RightArrow to create a new column next to column B
Type =COUNTIF(B,B) in the new column, just opposite the first data in column B
Select the cell with the equation you just typed and type Command-C
Shift-Click the last cell in the new column
Command-V
That business may take 30 seconds.
If you wish to format the backgtround fill option, go immediately to the Cells Inspector and click on Conditional Format and enter the condition and formatting options.
That's another 30 seconds if you are familiar with the process.
The theme with this and many other situations where Excel features are lacking in Numbers is that Numbers is a much leaner application than Excel. It's a different product, not a clone. There are a few painful gaps and differences and many unique advantages in Numbers. It's best to remain flexible. If Excel suits you better, use it.
Jerry

Similar Messages

  • How to make Highlighted links color permanent?

    Simply, for example, in Wikipedia, I clicked a link in their page to a different page, then that link would have been highlighted as "has been selected or clicked" with different color (in this case: purple), while links not have been clicked before are in blue.
    The problem is after a few week, the links the I have previously visited before which should have been in purple turned blue again indicating that that I have not visited this link before (but I already have). This seemingly seems like the cache have been reseted or cleared. But I have not cleared any cache. This could also be that the cache is full but I have not set any limit on the amount of content.
    So my question is, how do I ensure that the link that have been visited remain highlighted permanently for the font color so that I do not make the mistake of visiting the linked page again?

    Note that your System Details List shows that you have obsolete, no longer supported, preferences from previous Firefox versions.
    You can delete the prefs.js file and possible numbered prefs-##.js and user.js files to reset all prefs to the default value or reset these prefs to the default value via the right-click context menu on the <b>about:config</b> page or edit the prefs.js file and remove related line(s).
    Your System Details List also shows that you have a user.js file in the profile folder to initialize some prefs on each start of Firefox.
    The user.js file is only present if you or other software has created it, so normally it wouldn't be there.
    you can check its content with a plain text editor if you didn't create this file yourself.
    The user.js file is read each time you start Firefox and initializes preferences to the value specified in this file, so preferences set via user.js can only be changed temporarily for the current session.
    *http://kb.mozillazine.org/Preferences_not_saved

  • How do I edit an old website that is no longer listed on my iweb?  It is still alive online...help!

    I thought I had deleted it in iweb and started a new, unrelated website but then I see they are both alive under the same .com except one has .com/ with a different bit at the end.  I ideally would like to either edit part of it or delete it all together if that is easer but it is no longer on iweb.  Please help!  Many thanks!

    iWeb stores the website data in a Domain.sites2 file whose default location is Home Folder/Library/Application Support/iWeb...
    http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
    If the old website has been deleted from this file you would need to rebuild it since iWeb cannot import published files.
    To remove the older site from the internet you need to delete its files on the server using an FTP application or your host's file manager...
    http://www.iwebformusicians.com/Search-Engine-Optimization/Upload.html

  • Late sleep on MacBook Air, it must be the very long list of history in repair permission that how many times I repair it, when it's done, I do it again, suddenly it's a long list again, all about iTunes. So what's wrong with this iTunes 11.10.

    I predict something is going wrong because of the list history in verify permission disk. after I repair them for a few second , I do it again and also found that long list again..They are all about iTunes. So what's wrong with it. Thanks.

    As long as the report ends up with 'Permissions repair complete' then, as far as permissions go, you are fine. You can ignore the various statements in the report:
    Permissions you can ignore on 10.5 onwards:
    http://support.apple.com/kb/TS1448
    Using 'should be -rw-r--r-- , they are lrw-r--r--' as an example, you will see the that the permissions are not changed, but the | indicates a different location. This is because an update to Leopard onwards changed the location of a number of system components.
    Poster rccharles has provided this description of what it all means:
    drwxrwxrwx
    d = directory
    r = read
    w = write
    x = executeable program
    drwxrwxrwx
    |  |  |
    |  |   all other users not in first two types
    |  | 
    |  group

    owner
    a little more info
    Before the user had read & write. A member of the group had read.
    After, only the user had read & write.

  • How to create a "Custom Color" for highlighting? (Acrobat XI)

    March 10, 2014
    How to create a "Custom Color" for highlighting? (Acrobat XI)
    The numbers in the RGB and other fields change as various numbers are changed.
    I wanted to create a pale orange:
    Hue               13      Red      255
    Saturation   240      Green  177
    Luminosity    86       Blue     140
    I'd selected one of the orange squares in the color grid, to display the general orange area of the slider.
    I moved the slider to select a pale orange, which generated the above numbers.   Since this wasn't directly available to save to a Custom Color, I tried to  edit the numbers.  Unfortunately, the other numbers changed, making it impossible to actually create a color.
    Any suggestions would be appreciated.
    Note:  I used Techsmith's Snagit to show screen shots in a Word document.
    When I attempted to browse and upload the file, the error message said "[The content type of this image is not allowed.]"
    OK...what images *are* allowed?

    Hi Don,
    I saw Gilad answered your question in another forum post.
    Do you have everything you need at this point?
    Let me know if you need further assistance.
    Kind regards, Stacy

  • How to change highlight color of PDF texts to the standard golden yellow on Preview app?

    I use the Preview app to read my PDF books. I also read these same books on my iPad. When I read my books, I like to highlight the text. I'm used to highlight my text with the standard golden yellow on my iPad. When I use Preview, the only choice of yellow color I've found is a somewhat orange yellow that's called "yellow". Besides that, I see only 5 highlight options. Anyway, I'd like to highlight my text on Preview with the standard golden yellow, the same color that is available in almost all PDF editing apps. Anyway, how can I highlight my pdf texts with the standard golden yellow on the Mac Preview app?!

    Here is a picture to show the difference between the standard golden yellow (above) and the mac preview called yellow (below - looks like orange to me).
    Is there a way to highlight the pdf texts on Preview app in the golden yellow color, shown above?

  • How to change highlight color in Preview quickly?

    I do a lot of reading and annotating of PDFs using Preview. While I love just about everything about this program, my only complaint (if it could be called that) is that I can't figure out a quick way to cycle through the highlight colors without using the palette drop-down. Has anyone figured out a clever way to hotkey the colors for the highlighting annotation tool?

    yorkait wrote:
    You simply create new keyboard shortcuts for the Preview application (in system preferences). And set the shortcuts to "Red", "Yellow", and so on. This works because the contextual menu with the color is labelled this way. I binded all colors on Shift + Command + *letters from the first left hand side rows of keys*. Very handy.
    (Now if someone figured out how to customize the default colors I would be eternally grateful.)
    Great thanks, I didn't realize you could do that for those kind of menus as well until about a month ago when David Sparks showed doing that for Mail accounts.  I have been using the assignable key commands since they added that in Tiger.   I ended up doing something so much more complicated using Keymon and Size up to move the mouse and position the document on screen. 
    Thanks again I will add this and use this all the time!

  • How do I create a duplicate image inside the same page? Then how do I change the color of that image

    how do I create a duplicate image inside the same page? Then how do I change the color of that image from black to red?

    Hello there!
    Here is one way to create a duplicate image and colorize it. As you can see below, I have one image right now, that I want to duplicate.
    My layers panel looks like below.
    To duplicate your image, click the downward arrow on the right side of your Layer Panel.
    Select Duplicate Layer. This will duplicate the layer that the image is on.
    Select "OK" to approve the duplication.
    As you can now see in the Layers panel, the image is duplicated. The new layer is now at the top of the Layer panel.
    Now to colorize your image, go to Window > Adjustments.
    The Adjustments panel will now be opened. Select the Hue and Saturation icon as seen circled in red.
    The Hue and Saturation propertied panel will be opened. I selected "Colorize", and adjusted the hue and saturation bar to achieve the level red in my photo.
    As you can see below, the image is now red.
    Now i want to make sure only ONE of my image layers is red. I moved the Hue and Saturation layer to only be on top of the bottom layer. The image on the top layer now will not be affected by the red.
    Select the move tool, so I can now move the image layers so we can see both of them.
    With each image layer selected, you can take the move tool and move the images. I moved mine on top of eachother and you can see my red layer (bottom) and the non red layer (top).
    I hope that helps. i have also included helpful links.
    Please post back with any questions,
    Janelle

  • How do I highlight a passage in a website in a colored font before bookmarking website?

    On my Mac laptop, using Firefox, how do I highlight a passage within a website in a colored font before bookmarking the website?
    Where do I find Firefox's color options?
    Anything else I need to know about the process?
    Many thanks to anyone who can help!

    When you save a Firefox bookmark, it just saves the URL, not the current page. When you use the bookmark, it takes you to the URL and retrieves the page from the server again. So... the highlighting won't be there the next time. Maybe you could print the page to PDF and keep it that way??
    Also, I don't think Firefox has a highlighting feature built in. Perhaps you can find an add-on for that?

  • How do you print a Page document that will show your highlights in color say yellow

    how do you print a Page document that will show your highlights in color say yellow

    Let me guess you are not on OSX (10.6.5), which means you are using which version of Pages?
    Peter

  • How to change highlight color in Pages for iPad?

    Is there any way to do this? I know i can highlight selected text, but there is no option for choosing the color. It's always yellow and I would really like to highlight my text with many different colors.

    It looks like the Highlight (background) color can only be yellow.
    The best work around I can find is to change the text color itself which may work like a highlight of the text (like red, green or blue) which makes it stand out.  Maybe that will help?
    Format Inspector (the brush) > Style > Touch the Size and Font item > Color > swipe to see options.
    Note even there you can't go beyond predefined colors but you can make text stand out.
    ivan

  • How to change the background color of a single row

    Hi OTN,
    I am using JDeveloper 11.1.1.2 with ADF faces in view layer.My issue is How to change the background color of a single row in af:table ?.

    How to highlight ADF table row based on column value?
    Found by searching

  • How can i highlight a text item

    hi to every body
    i am using oracle forms 6i and I have many of text item which includes numbers of different format such as 12345 ,12-3-456,1-2345-12-23
    as you know when the user doubleclick on the text item it will highlight the value .
    only for the values which is not include A '-' .
    my question is How can I highlight the values which is include '-' when A user doubleclick

    DEAR ALL,
    I have an date block and in that date block there the display items are dates in tabular forms there are many dates display when user double click on the current date or any date it show the data of that date in the next block. i want to create a (when button pressed) in my Control Block that when button press the current date color changed automatically so for that what should i wirte in when button pressed.
    Thanks for you cooperation
    Regards,
    Kamran J. Chaudhry
    Message was edited by:
    Kamran J. Chaudhry

  • How do I highlight text in Pages?

    How do I highlight text in Pages - none of the menus, nor the 'Help' function seems to help...

    It's tough searching for something when you can't guess the terms to use. It's called a "background color." You can choose a color from the format bar.

  • How do I highlight text in the new Pages?  It's not clear.

    I have the new version of Pages.  And it appears that highlighting of text is an issue.  This is a basic function.
    I found there is one quick key version, but doesn't clearly explain how to change highlighting colours.  How to get into it.
    I have to explain this to my 80 year old mom, who we told to get a Mac because it was easier!
    So if anyone has it laid out step 1, 2, 3, that would be helpful, because it's not clear to me either.
    Thanks!
    Apple - please to a quick fix for this one, it should be the same as changing the size or the font or like bold or italic.  Simple, clear, fast and doable..... for anyone!

    TO Peter,
    Thanks for the list. I had found it in LibreOffice, tucked away in the Background tab of the Character pane opened by the Character... menu item in the Format menu, and named "Background Color. A few steps further down than in Pages. Apache OpenOffice has it in the same place. But both also have a hilight icon in the toolbar.
    I didn't fin highlighting or Color fill in Text Edit (v1.8). Might need a further search.
    But this well-equipped party of (one) oscurantist did find a shorter path to highlighting text in Pages '09, cleverly hidden in plain view! See the image below.
    TO hscortez,
    I'm aware that changing the text colour is not highlighting.
    But YeOldMacFan pointed out how to change text colour AND how to change background colour of text, using Character fill, found in the Advanced Options (Pages 5) or the More (Pages '09) tab of the Text Inspector.
    Character Fill fills the space around the character with the chosen colour. As shown above, it's essentially the same effect as dragging a hiliter pen along a line of printed text.
    Unfortunately, whats shown above is the Character fill well on the format bar of Pages '09—right out in the open like the highlighter pen button in LibreOffice, and presumeably in MS Word. I don't have Pages 5 (avoiding it until a few more of the missing features arrive), but I do note that Pages for iOS offers highlight as one of the options in the contextual menu that appears when a block of text is selcted.
    The process appears to be:
    tap twice to select some text.
    drag the handles at each end of the selection to adjust what's selected.
    tap Highlight in the menu that has appeared on the screen.
    One thing missing appears to be colour choice. The default is a 'hiliter yellow'. I didn't see a way to select a different colour.
    "Hopefully, this will make it on their upgrade list. "
    Hope is good, but taking action is useful.
    Pages menu > Provide Pages Feedback > Make your request that this be added to Pages 5. Requests made through Provide ...Feedback go directly to Apple. Comments and questions here are read by users like yourself, and we don't have the ability to change the way the apps work. Not directly,anyway.
    Regards,
    Barry

Maybe you are looking for

  • HT1338 Facetime Problems

    Since I installed iOS6 on my iPad, I'm having real problems with Facetime connecting to my MacBook Pro.  It connects for an instant than fails.  It says that I'm not available.  I've tried it over several different wifis and I get the same result.  I

  • App.activeDocument.cropBox returning an error (CS3)

    Hi friends My script currently being developed is working perfectly in Illustrator CS5, CS6 and CC. When testing in Illustrator CS3, the line where I read the cropBox property of the activeDocument returns an error. So I tried to isolate this propert

  • How to see the data stored in the t.code: cat2.

    Hi All I am doing Userexits here using CATS0006 exit.and T.code CAT2 i am entering values and i saved, it's showing data is saved. but i am not able to see that values, where it will store the data. Regards....

  • Connecting printer only to a second airport express

    My three Macs are on an Airport Express network connected to my cable internet service. It is not convenient to connect a printer to this Airport Express. Can I connect a printer only to a second airport express in another room and then print from an

  • Trouble with 5G 30Gb

    I am having a lot of troubles with my ipod, firstly, it was unable to write songs to it through iTunes, a warning would come up saying there was som sort of corruption, so I tried updating my iPod. Once i had done that, iTunes said there was somethin