How do I lower the write speed for burning a DVD? It gives me no option!

Export the dvd as an image from Encore, then use Imgburn to make the discs. I usually export a dvd folder from Encore and then use Imgburn to create the iso and do the burning
The Official ImgBurn Website
Be careful if you download it, it will try and install allsorts of other programs. This thread might be of some help.
Imgburn and Bloatware Add-ons

Similar Messages

What is the Read/Write speed for a 250gb Serial ATA hard drive?

Hello. I've been having some problems via my Mac (Kernel panic at start up) and is thinking wether or not it is the hard drive.
Does anyone know what the Write speed is for the specified hard drive. I'm currently getting about 5 mbps and that feels a bit slow
I'm on a Macbook Pro mid 2009 model.
Thanks in advance
Ashley.

I haven't got the logs. I had to reinstall everything in order to get it to start up (Couldn't find ACPI?)
And I'm only asking because it seems like my laptop HD is running slow. Is it normally about 5mbps for a 5400rpm HDD?

I'm looking for the read/write speeds for my Mac's.

I'm looking for read/write speeds for my Macs, but I can't find consistent data. Does anyone know the speeds or know where I can look? I have three computers:
iMac late 2013 Fusion/3TB i7
iMac late 2009 1TB i7
Macbook Air 256GB i5
Thanks,

I think the feature is called Voice Over, and I think it's now compatible with Reader:
http://support.apple.com/kb/HT3598?viewlocale=en_US&locale=en_US

Hi experts . how can we know the stock details for a perticular plant?

hi experts . how can we know the stock details for a perticular plant

check this code
REPORT YSG_MATSTK_REP    LINE-SIZE 220
                          LINE-COUNT 50(5).
*&                       DATA DECLARATION                              *
TABLES: MARA,              "GENERAL MASTER DATA
        MARC,              "PLANT DATA FOR MATERIAL
        MARD,              "STORAGE LOCATION DATA FOR MATERIAL
        MBEW,              "MATERIAL VALUATION
        MVKE,              "SALES DATA FOR MATERIAL
        MAKT.              "MATERIAL DESCRIPTION
DATA: BEGIN OF I_MARA OCCURS 0,
           MATNR LIKE MARA-MATNR,"MATERIAL NUMBER
           MBRSH LIKE MARA-MBRSH,"INDUSTRY SECTOR
           MEINS LIKE MARA-MEINS,"BASE UNIT OF MEASURE
      END OF I_MARA.
DATA: BEGIN OF I_MARC OCCURS 0,
          MATNR LIKE MARC-MATNR,"MATERIAL NUMBER
          WERKS LIKE MARC-WERKS,"PLANT
          LVORM LIKE MARC-LVORM,"FLAG MATERIAL FOR DELETION AT PLANT
                                "LEVEL
          PSTAT LIKE MARC-PSTAT,"MAINTENANCE STATUS
          DISPO LIKE MARC-DISPO,"MRP CONTROLLER
      END OF I_MARC.
DATA: BEGIN OF I_MAKT OCCURS 0,
           MATNR LIKE MAKT-MATNR,"MATERIAL NUMBER
           MAKTX LIKE MAKT-MAKTX,"MATERIAL DESCRIPTION
      END OF I_MAKT.
DATA: BEGIN OF I_MVKE OCCURS 0,
           MATNR LIKE MVKE-MATNR,"MATERIAL NUMBER
           VKORG LIKE MVKE-VKORG,"SALES ORGANIZATION
           VTWEG LIKE MVKE-VTWEG,"DISTRIBUTION CHANNEL
      END OF I_MVKE.
DATA: BEGIN OF I_MARD OCCURS 0,
           MATNR LIKE MARD-MATNR,"MATERIAL NUMBER
           LGORT LIKE MARD-LGORT,"STORAGE LOCATION
           LABST LIKE MARD-LABST,"VALUATED STOCK WITH UNRESTRICTED USE
      END OF I_MARD.
DATA: BEGIN OF I_OUT OCCURS 0,
        MATNR LIKE MARC-MATNR,
        WERKS LIKE MARC-WERKS,
        LVORM LIKE MARC-LVORM,
        PSTAT LIKE MARC-PSTAT,
        DISPO LIKE MARC-DISPO,
        MBRSH LIKE MARA-MBRSH,
        MEINS LIKE MARA-MEINS,
        MAKTX LIKE MAKT-MAKTX,
        VKORG LIKE MVKE-VKORG,
        VTWEG LIKE MVKE-VTWEG,
        LGORT LIKE MARD-LGORT,
        LABST LIKE MARD-LABST,
      END OF I_OUT.
DATA : TOT TYPE I. " TOT - TOTAL TO PRINT STOCK
*&                   S E L E C T I O N - S C R E E N                   *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-100.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR OBLIGATORY.
PARAMETERS: P_WERKS LIKE MARC-WERKS OBLIGATORY.
SELECT-OPTIONS: S_LGORT FOR MARD-LGORT,
                S_DISPO FOR MARC-DISPO.
SELECTION-SCREEN END OF BLOCK B1.
*&                  I N I T I A L I Z A T I O N                      *
INITIALIZATION.
S_MATNR-SIGN = 'I'.
S_MATNR-OPTION = 'EQ'.
S_MATNR-LOW = 'M-14'.
S_MATNR-HIGH = 'M-18'.
P_WERKS = '3000'.
S_LGORT-SIGN = 'I'.
S_LGORT-OPTION = 'EQ'.
S_LGORT-LOW = '0001'.
S_LGORT-HIGH = '0004'.
S_DISPO-SIGN = 'I'.
S_DISPO-OPTION = 'EQ'.
S_DISPO-LOW = '001'.
S_DISPO-HIGH = '002'.
APPEND S_DISPO.
APPEND S_LGORT.
APPEND S_MATNR.
CLEAR S_DISPO.
CLEAR S_LGORT.
CLEAR S_MATNR.
*&             S T A R T - O F - S E L E C T I O N                     *
START-OF-SELECTION.
SELECT MATNR WERKS LVORM DISPO FROM MARC
INTO CORRESPONDING FIELDS OF TABLE I_MARC
                      WHERE WERKS EQ P_WERKS
                      AND MATNR IN S_MATNR
                      AND DISPO IN S_DISPO
                      AND WERKS = P_WERKS.
IF I_MARC[] IS INITIAL.
    WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MARC'.
    EXIT.
ENDIF.
SELECT MATNR LGORT LABST FROM MARD INTO TABLE I_MARD
                      FOR ALL ENTRIES IN I_MARC
                      WHERE MATNR = I_MARC-MATNR
                      AND WERKS EQ P_WERKS
                      AND LGORT IN S_LGORT.
IF I_MARD[] IS INITIAL.
    WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MARD'.
    EXIT.
ENDIF.
SELECT MATNR VKORG VTWEG FROM MVKE INTO TABLE I_MVKE
                      FOR ALL ENTRIES IN I_MARC
                      WHERE MATNR = I_MARC-MATNR.
IF I_MVKE[] IS INITIAL.
    WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MVKE'.
    EXIT.
ENDIF.
LOOP AT I_MARC.
    MOVE-CORRESPONDING I_MARC TO I_OUT.
    CLEAR MARC.
    SELECT SINGLE MATNR MBRSH MEINS FROM MARA
                     INTO CORRESPONDING FIELDS OF MARA
                     WHERE MATNR = I_OUT-MATNR.
    IF SY-SUBRC = 0.
      MOVE: MARA-MBRSH TO I_OUT-MBRSH,
            MARA-MEINS TO I_OUT-MEINS.
    ELSE.
      CONTINUE.
    ENDIF.
    SELECT SINGLE MATNR MAKTX FROM MAKT
                    INTO CORRESPONDING FIELDS OF MAKT
                    WHERE MATNR = I_OUT-MATNR.
    IF SY-SUBRC = 0.
      MOVE: MAKT-MAKTX TO I_OUT-MAKTX.
    ELSE.
      CONTINUE.
    ENDIF.
    LOOP AT I_MARD WHERE MATNR = I_MARC-MATNR.
      MOVE: I_MARD-LABST TO I_OUT-LABST,
            I_MARD-LGORT TO I_OUT-LGORT.
      APPEND I_OUT.
    ENDLOOP.
    LOOP AT I_MVKE WHERE MATNR = I_MARC-MATNR.
      MOVE: I_MVKE-VKORG TO I_OUT-VKORG,
            I_MVKE-VTWEG TO I_OUT-VTWEG.
      APPEND I_OUT.
    ENDLOOP.
    CLEAR I_OUT.
ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    FILENAME = 'C:\matstk.TXT'
   FILETYPE                        = 'ASC'
TABLES
    DATA_TAB                        = I_OUT.
*&                  T O P - O F - P A G E                              *
TOP-OF-PAGE.
WRITE:/ 'DATE:' ,SY-DATUM.
*&                  E N D - O F - P A G E                              *
END-OF-PAGE.
WRITE: / SY-ULINE,
         /100 'PAGNO: ',SY-PAGNO,
         SY-ULINE.
*&        E N D -- O F -- S E L E C T I O N                           *
END-OF-SELECTION.
LOOP AT I_OUT.
    AT FIRST.
      WRITE :/ 'MATERIAL EXTRACTION REPORT',
               SY-ULINE.
    ENDAT.
    WRITE:/    SY-VLINE,
               I_OUT-MATNR,SY-VLINE,
               I_OUT-MEINS,SY-VLINE,
               I_OUT-WERKS,SY-VLINE,
               I_OUT-LVORM,SY-VLINE,
               I_OUT-PSTAT,SY-VLINE,
               I_OUT-DISPO,SY-VLINE,
               I_OUT-MBRSH,SY-VLINE,
               I_OUT-MAKTX,SY-VLINE,
               I_OUT-VKORG,SY-VLINE,
               I_OUT-VTWEG,SY-VLINE,
               I_OUT-LGORT,SY-VLINE,
               I_OUT-LABST,SY-VLINE.
    TOT = TOT + I_OUT-LABST.
    AT NEW MATNR.
      WRITE : 'NEW RECORD',
               SY-VLINE.
    ENDAT.
    AT END OF LABST.
      WRITE : 'STOCK = ',
               TOT,
               SY-VLINE,
               SY-ULINE.
    ENDAT.
    AT LAST.
      FORMAT COLOR 7 INTENSIFIED OFF.
      WRITE : /159 'TOTAL STOCK = ',
                 TOT.
    ENDAT.
ENDLOOP.
    WRITE : /159 'TOTAL STOCK = ',
                 TOT.
regards,
srinivas
<b>*reward for useful answers*</b>

I Can't seem to change the write speed when building a BluRay disc in encore

I burned a Bluray project on disc and the video freezes after about a minute on each chapter, someone reccomended changing the BD-R disc brand and burn with a slower write speed (2x or 4x) But when I'm in the build panel, the destination section where the write speed section is blank and appears greyed out, so I can't change it. Can somebody guide me in how to fix this?
I'm on encore CS5 running on a Mac 10.7.4.
The Burner is a 12x LaCie D2 Blu Ray burner. Any suggestions?

Hi Stan, thanks for the quick reply, I took your advice and did the build as an image and then burned the project at the recommended write speeds in Toast Titanium (10.0.9). The first burn was at 4x and the second was at 2x BD (an option in Toast) both speeds gave me the same result. It solved the issue with the freezing during disc playback, however, when I tried to navigate from chapter to chapter the disc, once again, freezes. Additionally, although it doesn't freeze during playback as with my previous burns, there's still slight skip at the same positions where there used to be a freeze.
I'd be content at this point with the slight skip, but it's been one issue after another with these BluRay authoring projects. This is my first project switching from FCP and I've burned 11 Bluray discs on this project and still don't have a deliverable project that I can give to my client. Not what I was expecting from Encore. Any help would be greatly appreciated.

How can I add new content in iDVD to a DVD-RW disc which has ample remaining free space? After preparing the new video for burning and clicking on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject.

How can I add new content in iDVD to a DVD-RW disc with a video previously successfully recorded on it? (The disc has ample remaining free space.)
After preparing the new video for burning and clicking in the File menu on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject. My assumption has been that iDVD would automatically find the free space and continue with the new recording from there. I'd be grateful if anyone can shine light on this.

There are, but not with a DVD written as a movie disk. It must be closed when completed, or it doesn't work.
Apple's built in Burn utility also automatically closes any data CD, DVD or Blu-ray disk you burn. Doesn't matter how much space is unused, you can't use it. You'd have to use a more advanced disk creation app, such as Toast Titanium. I then have the option of choosing to write the data as a session:
I can keep doing this until the disk is full. If I've written five sessions to the disk, when I put it in the drive, five CD/DVD icons will appear on the desktop since the OS will treat each session as if they are separate physical disks. At any point you choose Write Disk when writing a group of data, that means you're closing the disk, and again can't add anything after that. So if I had written two sessions, and the third was Write Disk, it's over. I can't put anything else on that disk.

How i can calculate the backplane speed & throughput of cisco 48 1G 2960S switch?

How i can calculate the backplane speed & throughput of cisco 48 1G 2960S switch?

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Calculate? Calculate for wirespeed/line-rate? If the latter, take all the port bandwidths, and assuming they are duplex, double for necessary fabric bandwidth. I.e. 48 gig ports would need a 96 Gbps fabric. Take all your port bandwidths, and allow 1.448 Mpps per gig (for minimum size Ethernet packets), i.e. 48 gig ports would need 69.5 Mpps. Once you have required fabric bandwidth and PPS, you can compare to vendor's specs.

Why is the write speed so slow to my NAS

Hi, I am trying to improve the write speed from my MBP to the NAS. I am using the Thunderbolt ethernet adapter connected to an Airport Extreme 7.6.1 using a wired connection. I have a Synology DS213 with a wired connection to the Airport Extreme as well. I am using CAT6 cables.
In testing my performance, I noticed writing files from my MBP to the NAS was very slow; whereas my read performance was much better. Please see the tests below to explain this further.
Using the Blackmagicdesign Disk Speed Test Utility using a 5Gb test file written to the NAS, I see the following:
Write speed is 7 to 8MB/s This write speed is what concerns me.
Read speed is between 60 MB/s and 75 MB/s
Using 2 finder windows (drag a file from one window(MBP) to the other(NAS)) and watch the disk activity on the Activity Monitor with a 1Gb file
When writing a file to the NAS from the MBP:
Write speed will burst to 19 to 23 MB/s but it will drop to below 10 MB/s at times.
When writing a file to the MBP from the NAS
Write speed is: 46 to 60 MB/s
Why would the write speed from my MBP to the NAS be so slow ; whereas, the write speed from the NAS to the MBP is very fast.
Synology has 2 WB 'green' disks configured as raid 1. I understand that part of the influence of writing from the NAS to the MBP is utilzing the advantage of writing to a SSD ; whereas, writing to the NAS it is writing to a slower drive.
Is 19 to 23 MB/s burst with dips below 10 MB/s during a copy typical? The other thing is I dont understand why the Disk Speed Utility never records write speeds to the NAS over 10 MB/s whereas the Activity Monitor will show the bursts at times of 19 to 23 MB/s
If 7 to 8 MB/s write speeds is too slow, what can I look at to improve this? Since writing the file in the other direction is pretty fast considering, how could the issue be a network one?

I was transferring my iPhoto library from an older MBP to a new retina and having the same issue - transfers almost immediately slowing to less than 100k/sec over my beautiful Time Warner-provided WiFi router using regular OSX folder sharing. I couldn't find any software updates as some other similar threads suggested.
I put my iPhoto library in a .tar.gz archive and that immediately transfered at about 7mb/sec, much much faster! So, without having diagnosed the issue, perhaps I've uncovered evidence that one or both of my machines doesn't like transferring big file trees. I bet a zip or any other archive would do the trick.

How do I lower the applemobiledeviceservice.exe*31 cpu usage?

How do I lower the applemobiledeviceservice.exe*31 cpu usage? It is running between 10-16% of my cpu usage for my laptop. Even if I shut it down in the windows task manager it starts back up in a few minutes. I am running windows 7.
Thank You for your help with this.

Michel Chaouli wrote:
I also ran Onyx and did all the maintenance steps.
Did you also do all the cleaning steps?
OnyX clears the dyld cache
Run through the Steps here
..Step by Step to fix your Mac
Also this
Why is my computer slow?
Eliminate a Wifi issue by connecting a Ethernet cable directly to your router or modem (power off/on)
If your still having beachball issues, what I suspect has occured (which a lot of people mistakenly do) is the hard drive got sectors damaged when the computer was moved/bumped while it was in operation.
The fix for this (and anything else) is rather drastic, all user data off the Macintosh HD will have to be removed, the entire partition Disk Utility > Erase with Secure Zero (or middle selection option), OS X reinstalled and updated, programs reinstalled and files returned.
If one has a previous uneffected bootable clone or TimeMachine backup that can be used to restore.
Most commonly used backup methods
Reducing bad sectors effect on hard drives

How can I test the throughput speed of the router?

How do I test the data speed of my Airport Extreme base? I want to test the functioning my airport extreme base. I experience frequent slowdowns and stoppages that don't occur when i access the cable modem directly.

To test data throughput of your AirPort (or any router) you would need to test both the WAN-to-LAN and LAN-to-WAN interfaces. A typical way to do this would be to use a utility like ixChariot.
For example, SmallNetBuilder has already done this with several different versions of the 802.11n AirPort Extreme Base Station (AEBSn). You may want to check them out to get an idea of what the AEBSn is capable of.
Another approach that is commonly used but not as accurate is to use "end-to-end" throughput testing utilities that are readable available from the Internet, like Speedtest.net.
Regardless of which technique you use, it is important to test throughput at each of your network segments to help pinpoint where the bottlenecks are. For example, if you do HD video streaming on your local network, you would want to test the throughput between the HD video source and the playback device.

How can i find the exact BADI For a Particular Transaction

hi ppl,
How can i find the exact BADI For a Particular Transaction. Is there any Standard transaction or Programs to do this or suggest some other way.

Use this code:
*& Report ZGET_BADI
REPORT ZGET_BADI.
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
*Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
*Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
*For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
Regards
Vinayak

How can I read the internet speed in a MAC?

How can I find the INTERNET SPEED in a MAC?

You typically use a free Internet Speed test. It does an upload and a download from a known site, bypassing certain configuration problems. Just do a search to find a dozen services eager to test with you (in exchange for the Ads on their pages).
Do not pay for this service, and DO NOT accept any CR@P they suggest you download to "fix" your speed. They cannot tell from outside whether you have problems, and none of the things you can download ever makes anything better.
If using Wi-Fi, one generally finds that the Wi-Fi part of the connection is the limiting factor.

How can I modify the High Speed Data Reader VI to show correct time information in x-axis?

I am just a beginner learning the LabVIEW programming currently.
I have a PXI 6115 DAQ card and have to make a hardware timed acquisition VI for maximum performance. Thus I use the High Speed Data Logger VI for data acquisition.
However, when I read my data by using the High Speed Data Reader VI, it doesn't show its correct time information in the graph.
How can I modify the High Speed Data Reader VI to show correct time information in x-axis?
I hope you can explain easily because I am a beginner.

Hey Chunrok,
I've modified the High Speed Data Reader VI slightly so that it now uses the scan rate of the data (as determined from the file) to set the scaling for the data points. If you wanted the start time to be a specific time you could use the start time obtained from your file to set the xscale offset as well.
I hope this helps!
Sarah Miracle
National Instruments
Attachments:
Example.vi ‏281 KB

How can I modify the High Speed Data Reader VI to show the time information in x-axis?

I am just a beginner learning the LabVIEW programming currently.
I have a PXI 6115 DAQ card and have to make a hardware timed acquisition VI for maximum performance. Thus I use the High Speed Data Logger VI for data acquisition.
However, when I read my data by using the High Speed Data Reader VI, it doesn't show its time information in the graph.
How can I modify the High Speed Data Reader VI to show the time information in x-axis?
I hope you can explain easily because I am a beginner.

Format the x axis to either absoulte or relative time.
You can do this by right clickingo n the graph and selecting x axis then formatting from the menu.
Thanks,
Naresh

How can I modify the High Speed Data Reader VI to show correct time information in x-axis?

I am just a beginner learning the LabVIEW programming currently.
I have a PXI 6115 DAQ card and have to make a hardware timed acquisition VI for maximum performance. Thus I use the High Speed Data Logger VI for data acquisition.
However, when I read my data by using the High Speed Data Reader VI, it doesn't show its correct time information in the graph.
How can I modify the High Speed Data Reader VI to show correct time information in x-axis?
I hope you can explain easily because I am a beginner.

First, I couldn't seem to find that example either on computer or on the NI sites.
The problem that we're running into is stated in the article that I pointed to - when real time VIs are running, then the OS will stop updating the OS clock. TO us it looks like the clock is losing time. There is a hardware clock on the PXI and it is read only during boot up to set the OS clock. Our discussions with NI have not led to a solution for this problem without checking the time on start and then checking the tick count (which does not lose time) and calculating what the current time is. No access to the hardware clock is supplied.
We're still working on a simpler way to get accurate time.
Rob

How do I lower the write speed for burning a DVD? It gives me no option!

Similar Messages

Maybe you are looking for