How do i make a seperate album for my old 3gs photos?

I currently have my iPhone 4 restored from my old 3gs and all the pictures are in my camera roll. I would like to have all my old 3gs photos and videos in a separate album. All of my old photos and videos are saved in a folder on my computer so if i were to delete all of them off of my new phone and synced with that folder would it put them in a separate album? Basically i dont know how to make separate albums any help?

You can only make albums on the computer, not the phone. Make sure all the photos are on the computer, arrange them as you wish, then resync them all.

Similar Messages

  • How do I make a new album for my pictures without using a computer?

    I don't have a laptop so I need an Esau way to make new albums.

    You don't
    The ipad works with a computer.  it is not really a stand alone device.

  • How do I make a private album in new Photos for IMac?

    How do I make a private album in the new Photos for IMac? I had one in iPhoto, and now that all the photos migrated to Photos my private album is not hidden anymore. Thanks for help!

    Photos does not hide photos in albums at all.  Photos can only be hidden from Moments, Collections, Years.
    If you want private albums, move the photos in questions to a different Photos Library, that you keep hidden.

  • I have an I phone and my own account  and just purchased an ITouch for my daughter - how do i create a seperate account for her on my computer?

    I have an I phone and my own  I tunes account  and just purchased an ITouch for my daughter - how do i create a seperate account for her on my computer? I want to make sure that my apps do not sync on her I touch.

    Go into Setttings -> Messages and make sure your Caller ID setting for Messages is set properly.

  • How can I make a intro page for my website, then after the intro has run make the page automatically change to my we site home screen

    how can I make a intro page for my website, then after the intro has run make the page automatically change to my website's home screen

    You can do this using a meta refresh but the problem is you have to add it to the html file for the page very time you publish changes.
    A better way is to create a splash page and upload it to the server outside of the folder produced by iWeb. Example HERE.
    The meta refresh is added to the head section of the html file...
    <meta http-equiv="refresh" content="32;url=http://www.domain.about.com/Page-Name.html">
    The delay time in seconds is marked in blue and the URL to the redirect page is in red.

  • How can I make a bootable disk for Mountain Lion?

    How can I make a bootable disk for Mountain Lion?

    Make Your Own Mountain/Lion Installer
    1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
    2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
    3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
    4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
    Double-click on the InstallESD.dmg file to mount it on your Desktop.
    Open Disk Utility.
    Select the USB flash drive from the left side list.
    Click on the Restore tab in the DU main window.
    Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
    Drag the mounted disc icon from the Desktop into the Source entry field.
    Double-check you got it right, then click on the Restore button.
    When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
    Note: The term Mountain/Lion used above means Lion or Mountain Lion.

  • How do I make multiple text bold, for example scene headings or character names?

    How do I make multiple text bold, for example scene headings or character names?

    You can do that by editing the template of the document.
    Open the document, go to Edit->Template. A dialog will launch which will have element types on the left and it's properties on the right.
    Select Scene Heading(or Character name) on the left. On the right, go to 'Text' tab and click on Bold checkbox.
    Press OK.
    Hope this helps.
    Cheers,
    Sunny

  • How can I make a "property node" for a VI?

    Hello!
    If I add a boolean button on the FP then I am able to make a property node for that button in the Block Diagram. But how can I make a property node for a VI? I have several VI:s an that together is one program. What I need to do is to verify what kind of VI some of my VI:s is. I need to verify if it is .exe or .vi-file, and if it is .exe then I want to disable run, abort, run continuously bottons otherwise not. I have hard that this is possible to do programmaticaly but I can´t figure out how. I am aware that I could do that manually in the File->vi properties->customize->windows appearance but theese choises makes it last forever.
    I want to be able to stop and run and everything if it is a .vi file, but if it is .exe-file then all those buttons should be disabled.
    Anyone have an example on this?
    In an other message at this Forum I read "You can use the `Front Panel Window. Allow Runtime PopUp`" property to disable run-time shortcuts menues programmaticaly, but still I dont know how to create this property node.
    /Amir

    You really shouldn't open a new thread. If you don't understand something, ask and we will explain it.
    Like I said in the other thread, you can check if you are running in LV or an EXE by using the Application>>Kind property. To get it, place a property node (from the Application Control palette) on the diagram, click it and find the property.
    To set the properties for the VI, place another property node, right click it and select Select Class>>VI Server>>VI. You should have the properties you want under Front Panel Window.
    To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here and here are a couple you can start with. You can also contact your local NI office and join one of their courses.
    In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf). I believe chapter 17 of the user manual explains about programmatic control of VIs.
    Try to take over the world!

  • How do I make a recovery disk for my Mac running 10.5.8?

    How do I make a recovery disk for my Mac running 10.5.8?

    Hi, if tryly a PowerMac, (PPC instead of Intel), you may need a Firewire Drive to be bootable, most PPC Macs cannot boot OSX from a USB drive.
    So we know more about it...
    At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
    Hardware Overview:
    Model Name: iMac
    Model Identifier: iMac7,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.4 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 6 GB
    Bus Speed: 800 MHz
    Boot ROM Version: IM71.007A.B03
    SMC Version (system): 1.21f4

  • I transferred data from my Macbook Pro to my Mac mini but it forced me to make a new user for my old data.  How do I transfer my music, pics, and docs from the "old" user to the new user (so that I only have one user instead of 2?)

    I transferred data from my Macbook Pro to my Mac mini but it forced me to make a new user for my old data.  How do I transfer my music, pics, and docs from the "old" user to the new user (so that I only have one user instead of 2?)

    Unless you transfer the files from Setup Assistant, Migration Assistant creates a new user with the data.
    To transfer the files to your first user, you have to log on this new user, and copy all your files to /Users/Shard folder. This is a folder where you can put the files you want to share between two or more users, and all users can read and write in it.
    After copying the files, go to your first user, open /Users/Shared folder, and copy the files to your user folders. If you migrated applications, you must know that they are stored in a common folder (/Applications), so you don't have to transfer them. To open /Users/Shared folder, open Go menu (in the menu bar) > Go to Folder, and type the folder

  • How do I make a DVD cover for a standard DVD holder (190 x 135 x 14mm) in Photoshop Elements 12?

    How do I make a DVD cover for a standard DVD holder (190 x 135 x 14mm)? I would like for it to be easy so I can fold the finished product and the front cover, spine, and back cover will all be in the correct space when inserted into the DVD holder. I know there is a "create DVD cover" option in Photoshop Elements 12, and I've tried that, however the dimensions never come out correctly. Can anyone help? Thank you!

    Get a template from Avery. These work well in WORD.
    Enhance the graphic in PSE, then import it into WORD.
    Free Avery® Template for Microsoft Word, DVD Case Insert 8891

  • How do I make a plot file for AutoCad to produce a PDF

    How do i make a plot file for AutoCad to produce a PDF

    Moving this discussion to the Creating, Editing, & Exporting PDFs forum.

  • How do I make document relative links for the site?

    How do I make document
    relative links for the site -
    <img src="../images/foo.gif"... (for example)?

    > How do I make document
    > relative links for the site -
    look in the bottom of the "browse to file" dialog box.
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • HT201364 how do i make more space available for mavericks update?

    how do i make more space avaialble for mavericks update

    One place to check is the hidden Library folder under your user account. From the Finder Menu click Go > Go To Folder > Enter: ~/Library/
    IF YOU ARE UNSURE DO NOT DELETE SOMETHING
    You may be able to find refrences to old applications that you have uninstalled. There is another folder inside that one called Application Support (~/Library/Application Support/). Same idea goes here, old software folders can be safely blown away. Don't forget to empty the Trash!
    Bonus Points?
    You can use the same technique on the /Library folder aswell!
    Happy Deleting!

  • Realtek network card seems to be disappeared. how can i make it visible again for the OS?

    i can't access my LAN card. somehow it is disappeared. how can i make it visible again for the OS? my OS is windows 7. thanks very much for your help

    right click on the button bar, then select "customize toolbar", drag any button you like into the toolbar and you're done!
    Diego

Maybe you are looking for