How do I make an executable that includes vision development module?

Hi,
I am trying to make an executable from a labview program that uses the avi tools from the 2012 vision development module to open and read each frame of the avi file. The executable will be used on computers that do not have labview or vision development. When I make the executable I make an installer that includes the labview 2012 runtime engine and the vision development 2012 runtime engine. When I attempt to open my executable everything works properly other than the fact that a blank screen is displayed and the avi frames cannot be seen. The executable even reads the proper frame rate for the avi file that is selected in the executable. I do not understand why the video is not showing up. Any advice would be much appreciated.
Thanks,
Rob

Hi Rob,
Welcome to the NI Discussion Forums! Do you have the proper video codecs installed on the deployment machines? The IMAQ AVI functions use the codecs installed on your computer to process AVI files.

Similar Messages

I've build an executable which include Vision Development VI;s. Can I run this exe on another machine wich does not have Vision software without installing some license.

I seem to get an Vision License not active error on the the machine I'm trying to run it on.
So again. I have two machines. Both have LabView (8.5) One has the Vision Development Software with License/activated.
The second does not. But I would like to build an exe on the first and run it on the second.
Is this possible with requiring a second license?
Thanks

you need a vision runtime license, they run about 300 USD each (I am pretty sure the vision kits don't come with any runtime licenses... which seems silly, but eh, it happens)

How can I make it so that my songs don't go on her iPod and her songs ....

Me and my mother just got iPods for christmas and hers was a U2 ipod and mine was a 30gb ipod. I have downloaded some songs and have imported some cds but my mother doesn't want those songs on her ipod. How can I make it so that my songs don't go on her iPod and her songs don't go on mine.Do i need to create another itunes?

The computer can tell the difference between your two iPods. When you first plugged each one in, you named them and the computer recognizes each one as a separate disk.
Now, when you plug in your iPod, and you are looking in iTunes at your iPod contents, you will see four buttons in the bottom right corner of iTunes - the first one is to display iPod options. Click on this, and under the music tab, select "Automatically update selected playlists only". Then, you scroll through your playlists and select only those you want to be transferred to your iPod. Your mother can do the same thing. Now you can each make your own playlists from the same music library, and only those songs you want to go onto your iPod will transfer when you plug it in. You can make the same selections for all the other options too (video, podcats. photos, etc), so that you only have to have what you want on each iPod.
I have two iPods, a new 5g video iPod and an ancient 1g iPod, and have no problems syncing each of them with different playlists and options.

In Mail, how do I make it so that email replies to me are sent to the email address from which I sent my original message?

I have two IMAP accounts set up in Mail, one work and one personal. The personal account also receives emails from a third account (but I have that set up through gmail's forwarding, not Mail). I am sending emails from my work account and replies are coming to this third account, which I don't want to happen.
How do I make it so that replies to me are sent to the email address from which I sent my original message?
Thanks for your help!

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer

When I connect my ipod to my computer it opens my documents and won't show up in my itunes and I have unistalled then reinstalled itunes and reset my ipod twice and it stills does the same thing how can I make it so that it shows up in my itunes?

When I connect my ipod to my computer it opens my documents and won't show up in my itunes and I have unistalled then reinstalled itunes and reset my ipod twice and it stills does the same thing how can I make it so that it shows up in my itunes?

Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem

How do I make it so that the one computer that has the main itunes account on it be used on other computers, when it comes to backing up phones and not deleting data off of phone that isnt on that computer itunes becasse its all on the one main computer

how do I make it so that the one computer that has the main itunes account on it be used on other computers, when it comes to backing up phones and not deleting data off of phone that isnt on that computer itunes becasse its all on the one main computer. Baiscally the problem is that one comuter and one account has always been sued for eey persons itunes. Now if we want to be able to backup and use itunes on our own computers fro our iphones and such, how will all he data that is on our phones not be deleted once its plugged into a new computer? Also, is theere a way to get all the stuff on thw current itunes onto each computer, via differtn account name?

option discovered in preferences. Really this and any feature that moves deletes or edits a users data should as far as possible be OFF BY DEFAULT. It shouldn't by default and without the users specific say do this dangerous and unnecessary thing without even letting the user know what it's doing!!! And then cause me a few hours (as i'm new to mac) searching for the option so as to switch it off. If i hadn't noticed the status cage declaring that it was copying files then i might never have twigged that this insane thing was occurring. And if i hadn't of noticed i would have been left maintaining the contents of the folder i copied the files to, the folder which as far as i was informed and so believed was also the location of the music files i was playing. How does Apple justify this 'genius' piece of software non-design? Surely it will hurt no one if this was off by default for new users - overall at least i dare say it would cause a lot less distress in the future for the unsuspecting public at large. Thanks for the support.

I cannot figure out how to set my apple id to use: itunes (two of accounts), apps store and Itunes store. How do I make one password that will be recognixed by all these devices?

I cannot figure out how to set my apple id to use: itunes (two of accounts), apps store and itunes store. How do I make one password that will be recognized by all these devices? My apple id is constantly not working.

Hi Lrwill,
If the apps that are on your son's iPad were purchased under his Dad's Apple ID, then signing your Apple ID onto the iPad will not help you with updating those apps.
Also, if the iPad was sync'd with his Dad's iTunes library, then hooking it up to your computer/iTunes library, will require you to reset the iPad, and everything that was loaded under the other Library and Apple ID will be wiped out.
Can you provide a little more info about what was set up under which Apple ID and what iTunes library the iPad was sync'd with?
Cheers,
GB

How can I make it so that when Safari opens it takes me to the homepage?

Say I am on youtube and I quit safari, when I reopen safari later, it goes to the page last open, in this case, youtube. How can I make it so that when Safari opens it always takes me to the homepage?

Click on the red button (top left) to close the window before quitting.

How do I make it so that itunes doesn't start automatically when windows starts?

How do I make it so that itunes doesn't start automatically when windows starts?

http://support.apple.com/kb/HT5449
http://support.apple.com/kb/PH11443
http://support.apple.com/kb/PH11428

How can i make a photo that is 10 x 6.6 to 10 x 8 without changing the image in Photoshop CS3?

How can I make a photo that is 10 x 6.6 to 10 x 8 without changing the image in Photoshop CS3?

I could be snarky and say change the image in a different version of Photoshop, but NO...
The only way to make a photo that is one size into another size is to change the image. You have a few choices about how to change it:
One way is to simply expand the height from 6.6 to 8 inches using Image>Canvas Size, using the default setting of having the image centered and leaving the background either black or white, your preference. This will add background color to the top and bottom of your image. This won't change the image itself, but it will change its surroundings.
Another way is to resize the image using Image>Image Size, entering the new dimensions after turning off the aspect ratio lock (resample on). This will stretch the image vertically, however, so it's probably not a good option.
Finally, you could resize the image using Image>Image Size, leaving the aspect ratio lock on and resample on, and increase the height from 6.6 to 8. This will have the secondary effect of enlarging the width from 10" to a greater width. Then you crop the resulting image back down to 10" width, which involves losing some edge areas of the image.

How can I make a button that on press the object appears and on second press the object to disappear

Hello,
I'm quite new to flash programing, and I don't know how can I make a button that will make the object appear and disappear.Till now I have this code for the appear:
on (press)
    _root.top1.gotoAndStop(2);
    _root.topp.gotoAndStop(2);
    _root.mm1.gotoAndStop(2);
          _root.m1.gotoAndStop(2);
but from here I'm stuck.
Thank you for your help

What you can do is use the _visible property of the object to make it appear and disappear, or more correctly, use the opoosite of the _visible property. You should not put code "on" objects, keep it in the timeline.
If "object" is the instance name of the object you want to toggle, then in the timeline code you can use...
object._visible = false; // start with the object being invisible
yourButtonName.onRelease = function(){
    object._visible = !object._visible;
That one line in the function sets the object's _visible property to be the opposite of what it currently is.

How do you make it so that the ipod will play all the different artists featured in an album when you click that album to play?

How do you make it so that the ipod will play all the different artists featured in an album when you click that album to play? At the moment, each artist in the album is being separated and I can't play them together. For example, to play the Halo 2 Soundtrack, Hoobastank, Breaking Benjamin, Nile Rodgers, etc. are some of the artists featured. However, in the Albums category, they are each separate choices. I want to play them all together, but can't. Is there a way to do that?

It sounds like the album metadata is incorrect, or differs from song to song in iTunes. Albums with various artists will play properly assuming all the songs are tagged with the same identical album name, as well as the track number. For the Halo 2 Soundtrack, metadata should look like this:
Song: <Song Title>
Artist: <Song Artist>
Album: Halo 2, Vol. 1 (Original Soundtrack)
Genre: Soundtrack
I had a similar problem with my imported Cowboy Bebop albums and the mixture of artists/album names. Once I adjusted the metadata, all of them play in the correct order just by selecting the Album from the available list or in Coverflow.

How can i make it so that on messages i can see who is online wihtout having to search their name?

how can i make it so that on messages i can see who is online without having to search their name? When i had ichat i didnt have to search their name... i culd see who was online autimatically.

Firefox, the web browser, doesn't make any decisions about what mail should be considered spam or what senders should be blocked. What email software or webmail site are you using that is rejecting the messages?
If it's a common site like Yahoo! mail, Gmail, Windows Live Hotmail/Outlook.com, then perhaps a volunteer familiar with their specific settings can help.
If it's Thunderbird, the support site is over here: [https://support.mozillamessaging.com/].
If your security/privacy software filters your mail, you will want to check its settings as well.

How would I make it so that when "deleting" an image I can make it so that the delete key does it or a button I put on the application?

How would I make it so that when "deleting" an image I can make it so that the delete key does it or a button I put on the application?
I want it so that I can use either a button on the designer window or the delete key. I know how to do the or part but the trouble I'm having is coding the button in.
if (LastImageClicked != null && (e.Key == Key.Delete || Button))
This is the code that I have in the format I'm looking for I just don't know how to do it. Thanks for your help!

There are a number of things which are unclear about your question.
I'll tell you one way to approach this though.
Handle Window.PreviewKeyDown.
<Window
Window.PreviewKeyDown="Mainwindow_PreviewKeyDown"
Code behind
private void Mainwindow_PreviewKeyDown(object sender, KeyEventArgs e)
if (e.Key == Key.Delete)
File.Delete("p001.jpg");
I don't know enough about what you mean by LastImageClicked but you need some way of knowing which path you are going to delete.
Then you might well have a problem if it's showing in an image control.
You will need to copy the picture off disk into a new bitmapimage object.
If you just do
<Image Source="p001.jpg"
Then that image will grab the file and you won't be able to delete it - you'll get an error.
In my experimental code p001.jpg is set as content copy always so it ends up next to the exe in the bin when the solution compiles.
You would probably want a full path to a file there.
Hope that helps.
Recent Technet articles:
Property List Editing;
Dynamic XAML

IPhoto able to make a slideshow that includes video clips?

I take a lot of video clips with my still camera which iPhoto organizes with my still pictures. When I select stills and movie clips to make a slideshow in iPhoto '06, it only puts the still pictures into the slideshow. So if I want to make a slideshow that includes video clips I have been spending much more time putting a slideshow together in iMovie HD. Not nearly as spontaneous as iPhoto does a stills-only slideshow.
Does iPhoto '08's built-in slideshow now play movie clips along with stills? That would be the 1 new feature I have been waiting for in each of the last few versions.
Bryan

bmart
I've been experimenting and it looks like, no, you cannot add a movie to a slideshow with v7. You might like to check out PhotoPresenter which has iPhoto integration, and can do this with v6, though it needs an update for v7.
Regards
TD

How do I make an executable that includes vision development module?

Similar Messages

Maybe you are looking for