How do I pair phone tocar phone? How do I enter four digit number?
How do I pair iphone 5s to car phone? How do I enter four digit number?
It can depend on the device. Some have you respond on the phone, some on the particular device. My vehicle had me respond on the vehicle. Follow the instructions for the particular device that you are using.
Similar Messages
-
please please can sombody help i cant understand apple good mind to change items
I have NEVER had a password for my iphone and I bought it outright. It asked me for a passcode and now I have been locked out of my phone. I will have to restore it but this is very annoying. Why ask me for a passcode when I have never had one? And why change my settings straight up after I download ios7?
Very frustrating. -
While tryimg to se account with pandora my ipad and iphone keep changing my zip cose and DOB to four digit numbers
L,
Your ranges need to be in a Header Column, and your values in the second column, a body column.
Before you begin entering your ranges, set the Format of the Header Column to Text.
That will prevent the "5-9" entry from converting to a date.
Jerry -
How do I stop msging from adding a "1" to a 10 digit number?
How do I stop messaging from adding a 1 to a 10 digit number?
It is clean, I set up the contacts card, and reentered the 10 digit number after the second fail message.
I entered: xxxxxxxxxx and the display on my contact card is (xxx) xxx-xxxx.
Might the carrier-provider be the issue?
Thank-you.
Tschüß
Ray -
Pairing devices fails after install of osx 10.8.5.. It fails at my Iphone and Ipad touch during the pairing about 5 seconds after I confirm the 6 digit number. Does this make sense? Whats the fix? I am moderately computer literate. Thanks for considering this.
The following entry may indicate a failing harddrive, so doing backups and replacing the harddrive may be in order.
Disk Information:
TOSHIBA MK7559GSXF disk0 : (750,16 GB)
S.M.A.R.T. Status: Failing <-----------
A little bit about drive S.M.A.R.T. status:
"The most basic information that SMART provides is the SMART status. It provides only two values: "threshold not exceeded" and "threshold exceeded". Often these are represented as "drive OK" or "drive fail" respectively. A "threshold exceeded" value is intended to indicate that there is a relatively high probability that the drive will not be able to honor its specification in the future: that is, the drive is "about to fail". The predicted failure may be catastrophic or may be something as subtle as the inability to write to certain sectors, or perhaps slower performance than the manufacturer's declared minimum."
http://en.wikipedia.org/wiki/S.M.A.R.T. -
HT201178 how do you pair a keyboard when you need to enter your password first
how do you pair a keyboard when you are being asked to enter your password first
It is ALWAYS a good idea to have a USB keyboard available, it doesn't have to be an Apple keyboard any old USB keyboard will work in a pinch.
-
How to Programmatically Pair and Unpair a bluetooth device?
Hi all,
I have a Bluetooth modem, which i want to programmatically Pair & Unpair. Using the available VIs, i could able to search the services and when i try to connect to the device using one service, windows pops-up the dialog to enter the Passkey (during that time, the VI gives an error out). I want to know, how to programmatially pair the device, meaning how to programmatically enter the passkey, so that user doesnot need to do anything using windows.
Thanks,
logicHere is a vi that lets you pair with a bluetooth device. You need the 32feet in the hand .net package
http://32feet.net/files/
-Regards
eximo
UofL Bioengineering M.S.
Neuronetrix
"I had rather be right than be president" -Henry Clay
Attachments:
Bluetooth discover and Pair.vi 51 KB -
I am trying to pair my cell phone and tablet using Messages App, but only MMS messages will come through on my tablet. I've tried pairing and unpaired, reinstalling app on my tablet, and can't figure it out. Any idea how to fix this?
ThanksI Shared my most ridiculous situation but didn t log under your problem.
sorry, I gave you your answer under sunshine99 or Dianna. I want out and you want in.
if you not find just email me at [removed]
thanks
Personal information removed as required by the Verizon Wireless Terms of Service
Message was edited by: Admin Moderator -
A lost my remote control for apple tv. I want to use my phone as a remote but the applications can' pair with the Apple TV device , how can I pair them without remote?
Setup for remote app: http://support.apple.com/kb/ht1947
Specifically:
Set up Apple TV (2nd and 3rd generation)
On Apple TV, select Settings from the main menu.
Select General > Remotes > Remote App. If Home Sharing isn't set up on your Apple TV, you should turn it on.
Apple TV (2nd and 3rd generation) uses Home Sharing to stream content from your iTunes library on your computer to your HDTV. If you connect your Apple TV to your iTunes library using Home Sharing, you can use Remote to browse and play content from any iTunes library in the Computers section of your Apple TV. You can also use Remote to select between available speakers to enhance your audio and video experience. -
Please let me know how can i pair up my IP5 with other IP5s ? whenever i switch on the bluetooth it still shows "Searching'' eventhough the other iphone 5 is kept near to my phone.
Sineshraj wrote:
Please let me know how can i pair up my IP5 with other IP5s ?...
This is not supported.
See here for Supported Bluetooth Profiles
http://support.apple.com/kb/HT3647 -
i cant connect my i phone 4 to my sony vaio laptop via bluetooth i am having problem can any one help me how can i connect my i phone 4 to my laptop using bluetooth i tried to paired but it just doesnt work help me pls!!
Unless you're trying to tether your phone to your computer or create a personal hotspot, it won't pair with your computer by bluetooth. File transfer by bluetooth is not supported. So, you can quit trying unless you're trying to tether.
-
How can I pair an iPad with an android phone via Bluetooth?
How can I pair an iPad with an android phone via Bluetooth? I get the pair message on both, but after acknowledging on both devices the connection fails to establish. I looked around and everything I found had to do with file transfer. I can share access to the internet via Bluetooth and it works with other devices I've tried this with. Thanks.
Sorry. After re-reading my question I realized that I wasn't clear. I don't want to transfer files. I want to use PDANet from my android and connect my iPad for internet access via bluetooth. I know this is a 2 way transfer of data not very different from transferring files, but I just want to be sure that this is not going to work so I can stop trying as if I'm doing something wrong. Like I said, I can do this with any other bluetooth capable device/computer I have. Seems like it's just not working either by design or as a result of some limitation. I guess 2 way communication with a headset gave me hope that internet access would work. Thanks!
-
How do i get my iphone to pair with another phone
i am new to iphone i had a samsung before this and it had a memory card and would like to get my pics from the samsung to my iphone via bluetooth but it will not pair with my phone how do i get it to pair
The iPhone does not support data transfer over BlueTooth. Copy the pics from the memory card to your computer or to Dropbox on the Samsung. Then import them from your computer using iTunes or directly using Dropbox. Dropbox is free for up to 1/2 GB.
-
Dose anyone know as yet how to pair with other phones please
Has anyone as yet found a way to pair with other phones, I'v managed to connect to car but carn't connect to my sons samsung.
Like everyone else it just gets stuck on search.
PS, If anyone from apple tec are readind these, PLEASE SORT IT!Don't say anything's idiot proof. You obviously haven't been on the forums that long.
HaHaHa!!! -
How do i tell if a phone is a 4 or a 5 model?
how can i tell if a phone is a 4 or a 5 model?
Append the last three characters of its serial number to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= and load the page.
(108875)
Maybe you are looking for
-
SSH on Outside interface on ASA 5510
Hi All, I need the ssh access on my ASA outside interface and have added ssh ipremoved 255.255.255.255 outside access-list acl_outside extended permit tcp host ipremoved any eq 22 but this is the log i get from ASA Oct 06 2012 16:10:04: %ASA-3-710003
-
SQL Reports Bad Idea Against RMAN Catalog?
11.2.0.1 SPARC 64 We use OEM to manage/execute our backups. The MML is NetBackup. One downside to this is that the "job" within OEM executes the backup for 20+ databases. In a serial fashion the backups occur in NetBackup...but most are queued - they
-
Defining SERVER_NAME to use RUN_REPORT_OBJECT on a hardware load balancer
Hi everybody, We are deploying a Forms application on OAS (actually Forms & Reports Services - FRS) 10.1.2.0.2 using a hardware load balancer, that distributes workload between two FRS instances on separate computers. Forms work without a hitch, but
-
Schedule A Report - OIUOW01_SCH_A
When I try to print or view a report the output is shown with a comma instead of a period in decimal interest (ie 0,01373291 instead of 0.01373291). I have looked at different configuration settings but have not solved the problem. Thanks very much!
-
Здравствуйте. Пожскажите пожалуйста как на iphone 3GS установить 6 IOS ?