How do I pass SELECT-OPTIONS to another screen via CALL TRANSACTION?

Good day, everyone!
I am writing a program that will be passing PARAMETERS and SELECT-OPTIONS values to another transaction via the CALL TRANSACTION statement. I'm new at this, and I've run into a problem. I have several fields that are defined as SELECT-OPTIONS, like so:
SELECT-OPTIONS so_ccode FOR fkkop-bukrs.
The user may select multiple values, enter a range, exclude certain values, etc. -- the things a SELECT-OPTIONS allows.
But how do I pass all of this to a field on another screen using CALL TRANSACTION when I only have two fields (BDCDATA-FNAM and BDCDATA-FVAL) available to me? That works fine for PARAMETERS, but I can send low/high values, different signs/options, etc. for the SELECT-OPTIONS variables.
Please help!! Points awarded for all helpful answers.
Thank you,
Dave

Don't use CALL TRANSACTION. Use SUBMIT instead.
Rob

Similar Messages

How to create the select option in the screen

HI,
I am developing one module pool program and I have below requirement,
currently plant is acting like PARAMETER and the now it should be changed to select option.
how to create the select option in the screen
Thanks and regarding,
Malla
Moderator message - Please search before asking - post locked
Edited by: Rob Burbank on Dec 16, 2009 1:41 PM

Try RANGES.
The RANGES has same structure as that of select-options.

Passing Select-Option to OO method via parameter list

Is it possible to pass a reference to a select-option through the parameter list of a method such that the parameter can be used in a "where clause" using the conventional "IN" operator? If so, how should the parameter be typed?
Thanks in advance,
Philip Smith

Sure, here's how.
report zrich_0002 no standard page heading.
tables: mara.
*       CLASS lcl_app DEFINITION
class lcl_app definition.
public section.
    types: t_matnr type range of mara-matnr.
    data: imara type table of mara.
    methods: constructor importing im_matnr type t_matnr.
endclass.
*       CLASS lcl_app IMPLEMENTATION
class lcl_app implementation.
method constructor.
    select * into table imara from mara up to 100 rows
                 where matnr in im_matnr.
    check sy-subrc = 0.
endmethod.
endclass.
data: myapp type ref to lcl_app.
select-options: s_matnr for mara-matnr.
start-of-selection.
create object myapp
        exporting
             im_matnr = s_matnr[].
Welcome to SDN!. Be sure to award points for helpful answers and mark your post as solved when solved completely. Thanks.
REgards,
Rich Heilman

How to hide a select option on slelection screen??

Hi all,
I wanna hide a screen field (select option) on selection-screen. I looped the screen in AT SELECTION-SCREEN OUTPUT and found the name of screen to hide. But the <option_name>_low and <option_name>_high are always show here.
Who can give me a way to do that???
In fact, i wanna hide or display the select option after choosing a radiobutton.Who can give me a way??

Hi,
Check the below code.
tables: pa0000, pa0001.
parameters: p_rad1 radiobutton group rad1 default 'X' user-command rusr,
p_rad2 radiobutton group rad1,
p_rad3 radiobutton group rad1,
p_rad4 radiobutton group rad1,
p_rad5 radiobutton group rad1.
selection-screen: begin of block blk1 with frame.
select-options: s_pernr for pa0000-pernr modif id ABC,
s_stat2 for pa0000-stat2 modif id DEF,
s_werks for pa0001-werks modif id GHI,
s_persg for pa0001-persg modif id JKL,
s_persk for pa0001-persk modif id MNO.
selection-screen: end of block blk1.
AT SELECTION-SCREEN output.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'ABC'.
IF p_rad1 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'DEF'.
IF p_rad2 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'GHI'.
IF p_rad3 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'JKL'.
IF p_rad4 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'MNO'.
IF p_rad5 = 'X'.
SCREEN-ACTIVE = 1.
ELSE.
SCREEN-ACTIVE = 0.
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
*Note
*Titles for Rado buttons and parameters.
*P_RAD1 Personal Number
*P_RAD2 Employment Status
*P_RAD3 Personnel Area
*P_RAD4 Employee Group
*P_RAD5 Employee Sub group
*S_PERNR Personal Number
*S_PERSG Employee Group
*S_PERSK Employee Sub group
*S_STAT2 Employment Status
*S_WERKS Personnel Area

How to creat a select-options in the screen layout of se80.

Because in se80 ,the screen is drawed in the screen layout,but it just have text-field for parameter.
Thanks!

In your main program, you can declare your desired select-option. Do your select-option declaration before calling your dialog screen.
Create a subscreen in your screen's flow logic (PBO & PAI) that contains your selection screen with its corresponding screen number of your declared subscreen.
sample code of select-option declaration below.
SELECTION-SCREEN BEGIN OF SCREEN 5003 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK PARAM.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (18) TEXT-ABK FOR FIELD S_ABKRS.
SELECT-OPTIONS: S_ABKRS FOR PA0001-ABKRS.
SELECTION-SCREEN POSITION 47.
PARAMETER: P_ATEXT LIKE T549T-ATEXT VISIBLE LENGTH 30.
SELECTION-SCREEN POSITION 70.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK PARAM.
SELECTION-SCREEN END OF SCREEN 5003.
call screen 5000.
Sample Flow logic Code below of screen 5000:
*--- PBO
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN SUB_5003 INCLUDING SY-REPID '5003'. " subscreen 5003
MODULE STATUS_5000.
LOOP AT GT_MBBH INTO GS_MBBH WITH CONTROL TC_MBILL
CURSOR TC_MBILL-TOP_LINE.
ENDLOOP.
*--- PAI
PROCESS AFTER INPUT.
LOOP AT GT_MBBH.
FIELD GS_MBBH-SELEC MODULE TC_TABLE_MARK ON REQUEST.
ENDLOOP.
MODULE USER_COMMAND_5000.
CALL SUBSCREEN SUB_5003. " subscreen 5003
Hope this will help..

How to pass the value to the screen through call transaction

hi
i have got an requirement for which i have to call MIGO tcode through call transaction command. But here one list box GODYNPRO-ACTION (screen field) contains list of values . my requirement is when i will call the tcode MIGO it should take defaultly DISPLAY option from list of values. I have searched for parameter id but i cannot get for that list box. please help me to solve this issue.
points will be surely assigned to helpful answers.
regards
shiba dutta

just try this its working...
tables: godynpro.
GODYNPRO-ACTION = 'Display'.
call transaction 'MIGO'.
Message was edited by:
Chandrasekhar Jagarlamudi

Passing SELECT-OPTIONS to smart forms

hi ,
how can we pass select options from a program to a smart form.
Regards
Arun

Hi,
Just try to append the valid values in select options to internal table from report.
Then pass that internal table(ofcourse, you need to create user-defined struture if needed in SE11) from report to smart forms.
Rgds,
J.Jayanthi

Passing Select option to the sub routine

Hi All ,
how can we pass select option values to a subroutine ,
Thanks in Advance
Vinay

Hi Vinay Kolla,
Check out this.
TYPES: TYP_DATUM TYPE RANGE OF SY-DATUM.
DATA: WA_DATUM   TYPE LINE OF TYP_DATUM.
SELECT-OPTIONS : S_DATUM FOR SY-DATUM.
START-OF-SELECTION.
PERFORM WRITE_DATUM TABLES S_DATUM[].
*&      Form write_datum
*       text
*      -->P_S_DATUM text
FORM WRITE_DATUM TABLES P_S_DATUM TYPE TYP_DATUM.
LOOP AT P_S_DATUM INTO WA_DATUM.
    WRITE : /10 WA_DATUM-SIGN,
                WA_DATUM-OPTION,
                WA_DATUM-LOW,
                WA_DATUM-HIGH.
ENDLOOP.
ENDFORM.
Regards,
R.Nagarajan.
We can -

Passing select options through subroutines

Hi
how do you pass select option values through subroutines?

Hello,
Is this what you are looking for:
TYPES: ty_r_bukrs TYPE RANGE OF bukrs.
DATA:
      v_date TYPE datum,
      v_bukrs TYPE bukrs.
SELECT-OPTIONS:
s_bukrs FOR v_bukrs OBLIGATORY,
s_date FOR v_date.
AT SELECTION-SCREEN.
PERFORM f_check_cocd
USING s_bukrs[].
*&      Form f_check_cocd
*       Check Comp. Code
FORM f_check_cocd
USING fp_s_bukrs TYPE ty_r_bukrs.
DATA: l_v_bukrs TYPE bukrs.
SELECT bukrs UP TO 1 ROWS
FROM t001
INTO l_v_bukrs
WHERE bukrs IN s_bukrs.
ENDSELECT.
IF sy-subrc <> 0.
*   Throw Error Message
ENDIF.
ENDFORM.                    " f_check_cocd
BR,
Suhas

How to create the select option for the Plant in screen (Module pool)

HI,
I am developing one module pool program and I have below requirement,
currently plant is acting like PARAMETER and the now it should be changed to select option.
how to create the select option in the screen
Thanks and regarding,
Malla
Moderator message - Cross post locked
Edited by: Rob Burbank on Dec 16, 2009 1:41 PM

Steps to get SELECT-OPTIONS in module pool programs.
1.Start one dialog program with SAPMZ_001.
Place the below code in the TOP include of the dialog program.
TABLES marc.
SELECTION-SCREEN BEGIN OF SCREEN 3200 AS SUBSCREEN.
SELECT-OPTIONS: werks FOR marc-werks.
SELECTION-SCREEN END OF SCREEN 3200.
2 .Create one screen 3000.
Go to Layout of the screen and Define subscreen area on the screen and Name it as l_subscreen.
Place the below code in the Flow logic of the screen.
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN l_subscreen INCLUDING 'SAPMZ_001' '3200'.
PROCESS AFTER INPUT.
CALL SUBSCREEN l_subscreen.
Activate all.
Create Transaction code for the dialog program .
Execute the transaction code. You will see the select-option for werks how we see on Selection-screen.

How to read data from select Options in another view without using context

I have 2 views, one for selection screen and another for displaying result.
In selection screen view I have define a select options with the help of webdynpro component.
Now my object is display result in result view based on entry of selection screen.
I don't want to do binding in context node, without that how I can read data of select option
in result view?
Regards,
Rasmi Ranjan Mishra

Solve by own.
If I define the Select options in component controller, then it will be global in nature. so i can get the value of select options
in another view also.
Regards,
Rasmi Ranjan Mishra

How to pass select-option filed to Function Module Exporting Parameter

Hi,
    How to pass select-option filed to Function Module Exporting Parameter.
Thanks

Hi,
DATA: BEGIN OF ITAB5_WRK OCCURS 0,
        KUNNR     TYPE KNKK-KUNNR, "CUSTOMER #
        SBGRP     TYPE KNKK-SBGRP, "CREDIT REP
        KLIMK     TYPE KNKK-KLIMK, "CREDIT LIMIT
        NAME1     TYPE KNA1-NAME1, "CUSTOMER NAME
        SKFOR     TYPE KNKK-SKFOR, "TOTAL A/R
        AMT1      TYPE KNKK-SKFOR, "CURRENT
        AMT2      TYPE KNKK-SKFOR,                          "01-30
        AMT3      TYPE KNKK-SKFOR,                          "31-60
        AMT4      TYPE KNKK-SKFOR,                          "61-90
        AMT5      TYPE KNKK-SKFOR,                          "91-120
        AMT6      TYPE KNKK-SKFOR,                          "OVR 120
        BZIRK     TYPE KNVV-BZIRK,
      END OF ITAB5_WRK.
SELECT-OPTIONS P_COMP     FOR T001-BUKRS
SELECT KUNNR SBGRP FROM KNKK
         INTO TABLE ITAB5_WRK
         WHERE SBGRP IN P_REP
           AND KUNNR GE '0001000000'
           AND SKFOR NE 0.
LOOP AT ITAB5_WRK.
    DELETE ADJACENT DUPLICATES FROM ITAB5_WRK COMPARING KUNNR.
ENDLOOP.
PERFORM GET_CREDIT_LIMITS.
*=======================================================================
IF P_DIST NE SPACE.
    LOOP AT ITAB5_WRK.
      SELECT SINGLE * FROM KNVV WHERE KUNNR EQ ITAB5_WRK-KUNNR
                                  AND VKORG EQ P_COMP
                                  AND VTWEG EQ '20'
                                  AND SPART EQ '10'
                                  AND BZIRK IN P_DIST.
      IF SY-SUBRC EQ 0.
        MOVE KNVV-BZIRK TO ITAB5_WRK-BZIRK.
        MODIFY ITAB5_WRK.
      ELSE.
        DELETE ITAB5_WRK.
      ENDIF.
    ENDLOOP.
ENDIF.
*==============================================================
LOOP AT ITAB5_WRK.
    MOVE: 'F/S'            TO WRK-KKBER,
           ITAB5_WRK-KUNNR TO WRK-KUNNR.
    PERFORM AGING.
    ADD: W_SNFAE TO ITAB5_WRK-AMT1,
         W_SFAE1 TO ITAB5_WRK-AMT2,
         W_SFAE2 TO ITAB5_WRK-AMT3,
         W_SFAE3 TO ITAB5_WRK-AMT4,
         W_SFAE4 TO ITAB5_WRK-AMT5,
         W_SFAE5 TO ITAB5_WRK-AMT6,
         W_SFAEL TO ITAB5_WRK-SKFOR,
         W_SNFAE TO ITAB5_WRK-SKFOR.
    MOVE: 'SPEC'            TO WRK-KKBER,
           ITAB5_WRK-KUNNR TO WRK-KUNNR.
    *PERFORM AGING.*
    ADD: W_SNFAE TO ITAB5_WRK-AMT1,
         W_SFAE1 TO ITAB5_WRK-AMT2,
         W_SFAE2 TO ITAB5_WRK-AMT3,
         W_SFAE3 TO ITAB5_WRK-AMT4,
         W_SFAE4 TO ITAB5_WRK-AMT5,
         W_SFAE5 TO ITAB5_WRK-AMT6,
         W_SFAEL TO ITAB5_WRK-SKFOR,
         W_SNFAE TO ITAB5_WRK-SKFOR.
    MODIFY ITAB5_WRK.
ENDLOOP.
FORM AGING.
*CALL FUNCTION 'CUSTOMER_DUE_DATE_ANALYSIS'*
EXPORTING
      BUKRS             = P_COMP
      KKBER             = WRK-KKBER
      KUNNR             = WRK-KUNNR
      RASID             = 'FEND'
      KLIMP             = 'X'
    IMPORTING
      SFAE1             = W_SFAE1
      SFAE2             = W_SFAE2
      SFAE3             = W_SFAE3
      SFAE4             = W_SFAE4
      SFAE5             = W_SFAE5
      SFAE6             = W_SFAE6
      SFAEL             = W_SFAEL
      SNFA1             = W_SNFA1
      SNFA2             = W_SNFA2
      SNFA3             = W_SNFA3
      SNFA4             = W_SNFA4
      SNFA5             = W_SNFA5
      SNFA6             = W_SNFA6
      SNFAE             = W_SNFAE
    EXCEPTIONS
      NO-AGING_SCHEDULE = 1
      NO_TABLE_INPUT    = 2.
CASE SY-SUBRC.
    WHEN 1.
      MESSAGE E999 WITH 'PLEASE ENTER AGING SCHEDULE'.
    WHEN 2.
      MESSAGE E999 WITH 'DO NOTHING ??'.
ENDCASE.
ENDFORM.                    "AGING
Thanks

HOW TO PASS SELECT-OPTIONS AS IMPORT PARAMETER TO A CLASS

Hi experts,how to pass select options value as a export parameters to a zclass.
can give me some idea.
Thanks
sai

As Sachin already said, selection options are stored in an internal table. You can reconstruct the table type without the corresponding input fields using the type addition RANGE OF.
So - assuming you have the following in your program:
DATA: wa TYPE sflight.
SELECT-OPTIONS so_car FOR sflight-carrid.
you can create a publically-visible type in your class using direct type entry and the code
TYPES: my_selectoption TYPE RANGE OF sflight-carrid.
and use this to define the importing parameter of the method.
The only other thing you have to remember is that select-options generates an internal table with header line. Thereore, to pass the table to the method, you would use (in the above example) so_car[], and not just the name of the select-option.
Hope this helps.
Regards
Jon.

How to Pass Select-options Single values as Parameter value to Method ?

Hi Friends,
I need to pass select-options values(single values) for s_arbpl to the method "process_percent_planned". Now all single values are in internal table s_arbpl-low field. I need to pass this internal table(s_arbpl-low) values to the method where i will run query based on these single values.In my below code i am passing value through variable w_arbpl. I have defined this parameter in the method.But here only one value is passed to method. I want multiple single values (in s_arbpl-low) should be passed. Please let me know how to correct code.
Tables: crhd.
Data: ktext type auftext,
w_arbpl type arbpl.
select-options: s_arbpl for crhd-arbpl.
ktext = 'Test'
create object obj_plan.
call method obj_plan->process_percent_planned
exporting
ktext = ktext
w_arbpl = s_arbpl-low.
Thanks

hi ,
when you want to pass S_ARBPL AS PARAMETER IN SELEC OPTION
ARBPL SUCH AS
   WIN002
WIN003
WIN004
WIN005
WIN006
WIN007
IN MULTIPLE SELECTION S_ARBPL
THEN
USE
Tables: crhd.
Data: ktext type auftext,
w_arbpl type arbpl.
select-options: s_arbpl for crhd-arbpl.
ktext = 'Test'
LOOP AT S_ARBPL .
create object obj_plan.
call method obj_plan->process_percent_planned
exporting
ktext = ktext
w_arbpl = s_arbpl-low.
ENDLOOP.
REGARDS
dEEPAK .
   THEN SELECT THAT
call method obj_plan->process_percent_planned
exporting
ktext = ktext
w_arbpl = s_arbpl-low.

How to hide the select-options fields on radiobutton select in webdynpro

hi
Could you please help how to hide the select-option fields in webdynpro
there are four radio buttons
for every radiobutton there is corresponding the select_option filed is associated to it
user as only provision select one radio button and reset of the select-option fileds should be hidden
which ever the radio button is selected corresponding the select-options fileld should be displayed
please find the attachement below

Hi Nine,
To hide select options you should use interface method REMOVE_SELECTION_SCREEN_ITEM of IF_WD_SELECT_OPTIONS.
Sample code :
Write the below code in the Event handler of Radio Button.
DATA lv_r_helper_class TYPE REF TO if_wd_select_options.
lv_r_helper_class = lo_interfacecontroller->init_selection_screen(
lv_r_helper_Class->REMOVE_SELECTION_SCREEN_ITEM(exporting i_id = 'Select_option1_id1').
This will hide first select option of your screen.Similarly pass select_option_id2 to hide it and so on.
Regards,
Ravikiran.k

How do I pass SELECT-OPTIONS to another screen via CALL TRANSACTION?

Similar Messages

Maybe you are looking for