How do I pre-set text phrases?

Settings>Keyboard>Shortcuts
Is this what you're looking for?

Similar Messages

How to restore image after Set Text of Container behavior

Hi there, I'm not sure how to apply the Set Text of Container behavior. Basically, when I mouse over an image, I want a larger version of the image with decription text to appear. I also want to restore the original image without text on mouse out.
I want the larger image and its text to appear in the exact location of the original image not anywhere else on the page. Here's an example what I've done to try and achieve the effect:-
1. Create a div and insert image in it.
2. Select the image and Set Text of Container behavior. Under the Set Text of Container dialog box, select the div that the image is in (e.g. div "apdiv1") and type in the New HTML - For example: <img src="largerimage.jpg">image description
3. Set the event to mouseover
I do not know how to proceed to restore the original image without text when I mouse out. I know I’m doing something wrong to achieve this effect but I can’t figure out what it is. Your help is greatly appreciated!

Use CSS Disjointed Rollovers.
http://alt-web.com/DEMOS/CSS-Disjointed-Image-Rollover.shtml
http://alt-web.com/DEMOS/CSS-Disjointed-Rollover-1.shtml
http://alt-web.com/DEMOS/CSS-Disjointed-Rollover-2.shtml
http://alt-web.com/DEMOS/CSS-Disjointed-Rollover-3.shtml
Nancy O.
THANK YOU NANCY It worked perfectly!
THANKS GRAMPS!

How do i set up or remove pre-emptive text?

how do i set up and remove pre-emptive text?
== This happened ==
Every time Firefox opened

The Mail app does not provide that funtion. Check with your email provider. They may provide such a feature through a web interface.

How do I find and/or change the pre-set voltage selection switch in an HP TouchSmart IQ500 series

how do I find and/or change the pre-set voltage selection switch in an HP TouchSmart IQ500 series (specifically an IQ524)
This question was solved.
View Solution.

Doesn't it use an external AC Adapter? If so, all you should need to use in another country is an adpater plug to match the wall socket.
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

How do I GET the 'set text of container' behavior in DW CS3 if it's missing?

I'm building a site using CSS in DW CS3 (bought in May 2006) that has some photo gallery pages where a large image changes per thumbnails to its right that are clicked. The thumbnails are in their divs and the wished-for big image should appear in a larger div to the left. I've read in other postings here that I can use Behaviors panel > Set Text > Set text to container to do this, but this behavior is missing in my Set Text submenu. How do I add this behavior there?
Also, how do I not only create this 'on click' behavior, but have the thumbnail image change to a 'HIT' state like a rollover would?
(P.S. - posted this yesterday, slightly different heading, but it didn't appear today)
Thanks for your help --

Check this location in windows C:\Program Files\Adobe\Adobe Dreamweaver CS5\configuration\Behaviors\Actions\Set Text
If this Set Text folder is not there it means that the behavior did not get installed. So you might need to reinstall DW CS3.

How do I make a printing pre set in Photoshop CS4?

I use Photoshop CS4 and print on an Epson R360. I often print high resolution images, usually jpeg, onto quality Epson paper with certain settings to get the best result. However I am aware that I can set a "pre set" to achieve this without having to make the print spec choices each time but don't know how to do it. I have checked the Adobe website but cannot find any relevant info that I can understand. Can anyone give me a simple guide how to do this please?

In the PRINT dialog box, [see Pic-1], make all the changes that you want,
then [see Pic-2]
SAVES US, name your preset. When you print again, then you just select that PRESET, and all your print specs for the PRESET should all be there. I hope this helps.
Arnel
www.arnelgarcia.com

How to set text in a TextArea

I have tried to find ways around this, but i must set text into a panel. but there is no .setText(), like there is for text fields. So how would i set text into a TextArea?
BTW: what i am trying to do is be able to constatly add things without replacing what has been put up there.
thank you

BigDaddyLoveHandles wrote:
sys5 wrote:
I have tried to find ways around this, but i must set text into a panel. but there is no .setText(), like there is for text fields. So how would i set text into a TextArea?
BTW: what i am trying to do is be able to constatly add things without replacing what has been put up there.
thank youCould it be that you are not aware of the documentation?
http://java.sun.com/javase/6/docs/api/
By the way, JTextArea does have a setText method, but it replaces the current text with the given text. It sounds like you want to use ---- but wait, it's better if you find that out yourself. Big hint: it's the first method listed on JTextArea's API page.
edit: too late!If he wasn't aware of the documentation, he probably would have tried using setText(), and found that it worked. That he thought it didn't exist suggests that he looked at the API but only looked in the method summary area, and not below at the "methods inherited from..." sections.
(sorry to ruin your surprise)

How do i set text in a object so that object expands with text and has even space on both sides of the object in illustrator cc?

how do i set text in a object so that object expands with text and has even space on both sides of the object in illustrator cc?

if you see all the different panel. I past the info in and have to manually expand the width of every panel. Is there a way of pasting the text in and the panel moves to the right with so that there is an even space on both sides of the blue panel?

I inadvertently pressed CTRL+ another key (possibly V or B or N) and the text size of my bookmarked page was significantly reduced in size. I can't read it. How do I re-set the text size?

I mistakenly pressed CTRL + another key (possibly V or B or N or whatever), when I was reading my e-mail. The text size shrank to a size that is useless to me, but I cannot seem to get the text size re-set to normal. Indeed all of the formatting on the page has been reduced (symbols, instructions, frames etc). Existing Firefox and returning to the bookmarked page makes no difference. How do I re-set the system?

Hi,
Please try '''Ctrl''' + '''0''' (zero). Alternatively '''View''' ('''Alt''' + '''V''') > '''Zoom''' > '''Reset'''.
[https://support.mozilla.org/en-US/kb/how-do-i-use-zoom?redirectlocale=en-US&redirectslug=Page+Zoom Page Zoom]
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]

Palm Pre - How do I forward a text message?

I need to see if anyone kow how to forward a sms/ text message that I received from one individual to another individual.
Cannot find anything in the help menu and don't see an ioption for forwarding message. When I do a search it only brings up instructions on how to forward an e-mail.
Thank you
Post relates to: Pre p100eww (Sprint)
(Title clarified by Mod)
Message Edited by WyreNut on 06-22-2009 06:50 PM

Fantastic phone, so I'm assuming that Palm is working on a usable text messaging applcation to replace the limited version on the Pre.
No forwarding
No copy/paste
Replies to the server address instead of the email address when the text is sent from [email protected]
Goes out of messaging and into email to send to email addresses
No way to change the alert to something that can be heard
No f/u alerts to remind if a message hasn't been seen
No way to see messages in a chronologic list instead of chat
All the above sort of short circuits the usefulness of the keyboard
Since this phone should be a messaging masterpiece given the hardware, it's suprising how poorly the application was written and hopefully fixing this will be a priority
The current messaging application is made for fun but some of us use messaging for work
In other words, why not copy the Treo application.....

How to set text and background color of current row in a adf table?

Hi,
In jdev 11.1.2.3,
How to set text fond and background color of current row in a adf table?
I tried to set Background color in table property, but that is not what i want.
Thanks.

Hi,
We almost had the same requirement, but we just needed to color a specific column.
Here goes the solution to that, you might do the same for your row highlighting
Changes are required in jsff and one method to be added in backing bean
1. JSFF :
<af:column headerText="Amount"
 id="c4" width="100"
 inlineStyle="#{backingBeanScope.BackingBean.cellColor}">2. Backing Bean
//searchResultTableVO is Table's VO
public String getCellColor() {
 FacesContext ctx = FacesContext.getCurrentInstance();
 ExpressionFactory ef = ctx.getApplication().getExpressionFactory();
 ValueExpression ve = ef.createValueExpression(ctx.getELContext(), "#{row}", FacesCtrlHierNodeBinding.class);
 FacesCtrlHierNodeBinding node = (FacesCtrlHierNodeBinding)ve.getValue(ctx.getELContext());
 Row row = node.getRow();
 if(row.equals(searchResultTableVO.getCurrentRow())){
//You can add your inline style for font-style too
 return "background-color:Red;";
 return null;
}Hope this is helpful :)
Regards,
Neha..

How often does Firefox Sync back-up data? I see there is no preference selection allowing you to change the pre-set frequency (whatever that interval may be).

How often does Firefox Sync back-up data? I see there is no preference selection allowing you to change the pre-set frequency (whatever that interval may be).

However, the sync action only triggers every 60-minute and there is no user-configurable option provided. Although one can put a Sync icon onto the toolbar for easier access, it is still far from practical needs.
To unlock this limitation, do the following:
1) Type “about:config” at the address bar
2) Search for “services.sync.syncInterval”
3) Change the value from 3600000 (milliseconds = 3600 seconds = 60 minutes) to any value (in millisecond) of your choice
4) Close and restart Firefox
The Sync action will now trigger at the interval you just set.
from: http://tomtsui.wordpress.com/2011/04/29/modify-firefox-sync-interval/

HT3529 How do I send a group text, I have set up groups in my gmail account but can't figure out how to send a group text without adding them all individually

How do I send a group text message, I have groups set up in my gmail account but can't figure out how to send a group text without adding them all individually ?

You can use iCloud:
Step 1. Log into www.icloud.com using your Apple ID.
Step 2. Click on Contacts and then click the groups ribbon (the red icon with two people) which is on the left-hand page when viewing All Contacts.
Step 3. The left page changes to a list of Groups (only those groups stored in iCloud are shown). Click the + button at the bottom to add a new group.
Step 4. Type a name for the new group and press Enter to save it. To change it after this, double-click its entry in the groups list.
Step 5. To add contacts to the new group, click on the All Contacts group and locate the first person to be added (you can use the search bar to find them quickly).
Step 6. Drag their name on top of the new group and drop it to add it to that group.
Step 7. To add more contacts, repeat steps 5 and 6, but you can add multiple contacts at once by pressing Ctrl (on a PC) or Command (on a Mac) and clicking on each contact in the list that you wish to select. Then, drag one of the highlighted names to the new group and they will all be added.
It's possible to add names to more than one group, and you can create as many groups as you like.
Step 8. Launch the Contacts app on your device (iPhone, iPod touch or iPad) and you should see the new group appear almost immediately - as long as you have an internet connection.
Until Apple builds in a function to create groups directly within the Contacts app, this is the best way to do it.

How to pre-set values to iView form WebDynpro

Hello
I'm using MDM 5.5 Business Package with WebDynpro.
I want to set the values got by WebDynpro to MDM iView.
for example,
In the screen(iView) for creating a record, all input fields are empty at first.
And then, the values will be set on each fields when the customized button clicks.
ref
/people/steffen.ulmer/blog/2006/10/05/extending-mdm-55-business-package-functionality-with-web-dynpro-for-java-using-epcf
/people/steffen.ulmer/blog/2007/01/03/integrating-mdm-item-details-iview-into-a-webdynpro-application
I read these blogs, but I don't know how to pre-set values to iView.
Regards.
Koji

Hi,
try this way..
go to Se09/Se10-->Click on the trnasport request >go to Tab Object>Prog(R3TR) OBJ(TABU)Object name (<Enter table name>)
>Next press Include Object>Enter write condiiton for the table field and retrive the data into transport request for specified Keys.
http://searchsap.techtarget.com/tip/How-to-transport-table-entries
Prabhudas

When viewing a pdf document how do I change the default or pre-set magnification?

Anytime I am directed to a pdf document by a website it opens the pdf file at 173% magnification. It tells you to open the menu to change the pre-set magnification, but I don't see a menu to open.

Maybe you did not include enough information in your question or your question was not specific enough since your reply indicates that you have already asked the question and have received an unsatisfactory answer. Please attach a screen shot demonstrating the magnification. Also include written information about where you are seeing the 173% or other magnification value that you are seeing on the image that you attach.
'''Posting a screenshot'''
*http://en.wikipedia.org/wiki/Screenshot
*Windows: http://www.wikihow.com/Take-a-Screenshot-in-Microsoft-Windows
*Windows 7: http://www.sevenforums.com/tutorials/9717-screenshot-paint.html
*MAC: http://guides.macrumors.com/Taking_Screenshots_in_Mac_OS_X
*See: https://support.mozilla.com/en-US/kb/Adding+screenshots
Save the file as a .png or .jpg image to your hard drive. When you reply, click in the "Screenshot" box below the reply area, and browse to the saved image on your hard drive. NOTE: If you use "Preview" before "Submit", the screenshot will not attach; you must repeat the process of clicking in the "Screenshot" box below the reply area, and browse to the saved image on your hard drive.
'''Also see these Firefox extensions:'''
*Abduction!: https://addons.mozilla.org/firefox/addon/3408
*FireShot: https://addons.mozilla.org/firefox/addon/5648
*Screenshot Pimp: https://addons.mozilla.org/firefox/addon/12985
*Screengrab: https://addons.mozilla.org/firefox/addon/1146

How do I pre-set text phrases?

Similar Messages

Maybe you are looking for