How do i read out the actual voltage range of the daq board as calculated by labview based on my input voltage range

I am somewhat new to DAQ so I hope I describe this well enough, but I have encountered a requirement for my VI that I am not sure how to obtain from LabVIEW. It is my understanding that when using a DAQ board (I'm using a PCI-6034 E) you can specify the voltage range you expect from your measurements, and then the software calculates the actual voltage range it will be measuring to ensure that you get the best resolution in your range that you can given the voltage step size, etc. of the equipment. I know how to extract the voltage input that I enter into the virtual channel, but I was wondering how I can extract the actual voltage range that the hardwar
e/software is using based on its own calculations from my input. Can anyone help me with this?

If I understand correctly, you want to retrieve the actual gain value (and, therefore, usable input range) used by your DAQ card for a particular measurement.
I think there's a good KnowledgeBase entry with your solution entitled "Programmatically Determining the Gain Used by a DAQ Device". Here's the URL:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/c93d3954ec02393c86256afe00057bb0?OpenDocument
Regards,
John Lum
National Instruments

Similar Messages

I was fooling around with the "reader" feature on my New iPad. I am now stuck with that and can't get out. Even my four digit code is read out in a machine voice and the iPad wont boot. How do I get out of this. Tried the red arrow slider. shut of the iPa

I was fooling around with the "reader" feature on my New iPad. I am now stuck with that and can't get out. Even my four digit code is read out in a machine voice and the iPad wont boot. How do I get out of this. Tried the red arrow slider. shut of the iPa

James,
I cannot get into Settings! It keeps reading out Slide to Unlock when I try to slide teh arrow to open the fpur digit entry boxes.

How can I find out if I am eligible for the free upgrade?

I have a current model MB Air, bought in January this year. How can I find out if I am entitled to the free Lion upgrade? I had a runt around the Lion app store page but couldn't find anything.
Thanks in advance
SR

The only way to get it free that I know of is that you have to have bought a new Mac on or after June 6th, not January..... so it seems you'll need to pay for it.

HT4436 how do I find out what I have stored in the Cloud

How do I find out what I have stored in the cloud? Also I have an update (6.1.1) for my 4S I-phone but can get it to download - even when my phone is connected to my computer. Can anyone help?

You can see some of your data by going to icloud.com from a computer and signing into your iCloud account. Other data can only be viewed on an iOS device or computer that is syncing with the account.
What do you mean when you say you can't "get it to dowload"?

How do I find out if my iTunes ID is the same as my iCloud password?

How do I find out if my iTunes password is the same as my iCloud password?

Hello jenny86753092008,
Welcome to the Apple Support Communities! Your iTunes and iCloud passwords will always be the same unless you have multiple accounts with us. To check to see if you have multiple accounts, you can use this handy Apple ID tool:
Apple - My Apple ID
https://iforgot.apple.com/appleid
You can also contact us for assistance to see if you have multiple Apple ID accounts:
If you forgot your Apple ID password - Apple Support
http://support.apple.com/en-us/HT201487
Make sure that you’re entering the correct Apple ID. In most cases, your Apple ID is also the primary email address of your Apple ID account. If these steps didn't help you change your password, contact Apple Support.
Cheers,
Matt M.

How do i sign out of my aol account on the ipad

how do i sign out of my aol account on the ipad

Select it under Settings, Mail etc and then delete it.

How to change hdmi out to 720 from 1080? the widescreen mode switch didn't help.

How to change hdmi out to 720 from 1080? the widescreen mode switch setting didn't help, it used to work.

Read the instructions that came with the device.
Basically, activate the device and everything should simply work.

How do I find out what applications are running in the background

I have a 2008 iMac with 2GB memory. How do I find out what programs are running in the background? I am going to buy a new iMac before the end of the year to replace this one. When I looked at Activity Monitor it shows 1.8Gb used but doesn't tell all the programs running.

open activity monitor [if it doesnt launch click winders>Activity Monitor]. then it'll show all proceses

I had a trial version of Pages for 30 days and then purchased the actual software without removing the trial. Now when I try to edit documents and save them it wont because it tells me I am using a trial version.... How can I remove the trial version?

I had a trial version of Pages for 30 days and then purchased the actual software without removing the trial. Now when I try to edit documents and save them it sometimes wont because it tells me I am using a trial version.... But sometimes it lets me!! How can I remove the trial version? I cannot tell which one I am using when I open it....

Question asked and answered quite once a week.
Go to my iDisk (address below)
and download :
For_iWork:iWork '09:uninstall iWork '09.zip
Run it then reinstall the purchased software.
Yvan KOENIG (VALLAURIS, France) vendredi 2 janvier 2011 16:21:41
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please :
Search for questions similar to your own
before submitting them to the community

My macpro runs slow with or without internet on..... How can I find out if something is running in the background?

my macpro runs slow with or without internet on..... How can I find out if something is running in the background?

Please boot in safe mode and test. Still slow? If you connect to a wireless network, you may have to connect with Ethernet in safe mode.
After testing, reboot as usual (not in safe mode.)
Mac OS X: Starting up in Safe Mode

What is the actual file size for the iphone 4s update - 55.5 mb's or 832 mb's

Can someone tell me the actual file size of the new update for the iphone 4s On my iphone it is telling me it is 55.5 mbs but when I try to download the file thru i tunes it twlls me it is 830 odd mb's.
Thanks, michael.

I suspect if you update wirelessly you are just downloading a "delta" updater whereas downloading through iTunes you are downloading the entire replacement firmware. Wirelessly updating does not take nearly as long for the download nor does it require completely erasing then restoring the device.

LSMW update vendor account just if the actual (old) is in the txt file

I want to update the vendor account but just if it is the same I have in the txt file.
My txt file is the fllowing for example:
Vendor - Old Account - New Account
A2
A123
A321
A1
A133
B321
A3
A144
C321
So, for each vendor if the actual bank account number is (old account in the file) replace the actual (old account) with the new account.
In the CODE text for LSMW (check my attach) I have this:
IF FK02A-BANKN_01 = CTAS-BANKN. FK02A-BANKN_01 = CTAS-BANKNNUEVO. ENDIF.
Where:
FK02A-BANKN_01 is the FK02 text for vendor account
CTAS-BANKN is in my file and structure defined the OLD ACCOUNT
CTAS-BANKNUEVO in my file and structure defined the NEW ACCOUNT (the one should be now)
But it is not replacing, if i check converted data, this field is empty. So the if is not working. Ideas?
I changed it by
FK02A-BANKN_01 = CTAS-BANKN
or
FK02A-BANKN_01 = CTAS-BANKNNUEVO
and it works, but put the old or the new code of course, not doing the comparation with the old and replacing with the new.

exact, similar to what I showed and described in my blog LSMW Long text load by Direct Input method
and you must not forget that the account in the database is stored with leading zeros in case of numeric account and less than 10 long, so there is another potential risk that it wont match without doing an extra conversion of your source field content.

Calculating the actual value when creating the input schedule on BPC NW 7.0

Hello Experts,
I have One questions regarding the calculation when building the input schedule.
the structure of this input schedule is like this:
CV: App01-time-entity-account-version-p_datasource ...
Plan Value Actual Value
Project 1000
In the backend of BPC ,The Actual value is retrived from other system using BW DTP function, and with the monthly based line item. We build the BPC-mutiprovider by the actual value cube and the plan data cube.
From the BPC Office view, we want display the actual value by aggregating historice data till the month which user selected in the current view. These actual data is just the reference for user when they input the plan data. so we dont want these data stored in the application or database.
Can anyone give us some hints?
Thanks a lot in advance!
Best Regards,
Vivi
Edited by: Vivi Sun on Jan 19, 2009 1:12 PM

Vivi,
Were you able to accomplish what you were looking to do? I would appreciate if you could share that info with us.
Thanks.

After downloading ios 6 to my ipad 3 , I can't see the pics of many of my purchased albums when I first open up the Music app. Why? And when I click on the actual album, it shows the pics.

After downloading ios 6 to my ipad 3 , I can't see the pics of many of my purchased albums when I first open up the Music app. Why? And when I click on the actual album, it shows the pics.

After a while it start to work.... No problems.

Provide brings back the actual date , different to the table content

Hi,
I´m not a developer, but must do that part now in my company.
We have a 46C with actual packages.
In a customer report I have to add 2 fields to an output.
It selects from PNP and provides data like follows:
GET PERNR.
PROVIDE * FROM P0000
FROM P0001
FROM P0002
FROM P0006
FROM P0007
FROM P0013
FROM P0016
FROM P0053
    BETWEEN PN-BEGDA
        AND PN-ENDDA.
That worked fine.
Now I liked to set 2 fields with contents of IT 0000 (table PA0000):
    IF P0000-MASSG = '01'.            " MA aktuell im Vorruhestand ?
     TRANS-BEGVORRST = P0000-BEGDA.
     TRANS-ENDVORRST = P0000-ENDDA.
    ENDIF.
At debugging I can see, that the requested fields from P0000 are set to the actual date, not to the value I can select from table or shown in the SAP transaction.
All other fields from PA0000 are matching the row I expect, but not the date fields
Any idea?

Hi,
That is the behavior of PROVIDE statement. If you combine (JOIN) several tables (P0001, P0002, etc) together, it will give you all the intersected dates.
For example, in two tables itab1 and itab2, the respective columns col1 and col2 are interval limits of type i. The filling of the internal tables results in the following intervals (rows two and three):
|   Itab1 Int1    |     |Itab1 Int2 |     |
|        |      Itab2 Int1       |        |
| |          ... BETWEEN ...             |
| | i1 |   i2   | i3 |   i4   |i5|     | <<<< This is the result
Regards,
Lim...
Edited by: Ruslim Chang on Apr 17, 2009 11:26 AM

How do i read out the actual voltage range of the daq board as calculated by labview based on my input voltage range

Similar Messages

Maybe you are looking for