How do I remove images viewed using preview?

Hi, I'm new to this forum and not very computer savvy, so please bear with me if in the wrong place or asking dumb questions or using wrong jargon!
Still not quite understanding preview except that it seems the only way to see a bigger image of photo's I've added into PICTURES in Finder.
If I click on PREVIEW it takes me to a screen with an image I've previously viewed, then if I swipe again/repeatedly with 4 fingers more images on their own screens are seen as if I'm looking at a photo album. Most of these images I don't want anymore and have deleted them from PICTURES in finder but they are still in PREVIEW. There is no option (can't right click) or menu bar to delete or remove the images. When I right click on the PREVIEW icon I can see a list of the images/pictures I viewed but no option there either to delete. If I click on one, that one appears on a screen but the others don't disappear.
How can I remove the images I don't want to see/keep. And how can I choose the ones I do want to see.
Thank you for your patience and time

Hi Drew & Kilgore*
Thanks for your replies. I also have and use Simplenote, although I went off it for a while, when it started crashing all the time on me. It seems to be more stable again now, so I'll start using it more regularly again, perhaps.
I am, obviously, disappointed that one can't simply select ANY object within a Notes document and choose to delete it. As I rather suspected, the only solution is an annoying workaround. Apple stuff seems to get more like this as time goes by. At least in my experience.
I solved the issue my own way in the end, but I guess it was close to your 1st idea DR, and your 2nd option, KT: I basically cut and pasted everything above, and then everything below, the image, and pasted both chunks of text into a new note. So it took two passes, and left me with the original note just displaying the image, which I then trashed.
Tapping to the right of the image followed by deletion was what I hoped & expected would work. But instead the image stayed put and the text below the cursor would simply slide along the right hand side, moving upwards as I deleted! Most bizarre, to my mind at least.
Anyway thanks for the feedback. But, for anyone else that might want to know how to do this, the answer is: NO, you can't select and delete an image once it's in one of your notes!
* I quite recently watched the rather strange Bruce Willis / Nick Nolte 'Breakfast of Champions' movie... I think I still prefer the book to the film!

Similar Messages

How to create a Image Viewer using JOGL JSR 231

Hello All,
Am very new to this JOGL concept. I believe its advantage is the speed with which image transformations and manipulations can be done. My need is on similar lines albiet only on 2d, i.e to be able to display large medical images to the tune of may be 20-30 MB. Apart from displaying them I should also be able to zoom , pan and the other normal manipulations. Currently teh speed with which the image pans or zooms are extremely slow that its a pain to the users.
Could anyone please provide a sample code on how to load and zoom an image using the JOGL JSR 231 version. Why I am saying this is because I tried working with the older JOGL and when I migrated to this latest version, the package structure and methods seems to have changed. In both cases I did not make any headway. Any help, suggestions are welcome and I would remain thankful for the same.
zeus

to Justin
I am trying to write the jpg image files to the client machine.
In fact, I am working on a distributed database system,
thus the client machine has its own DB instance.
The blob table of a site A is transferred to a site B using "database link".
I inserted jpg images at the site A, and the BLob table was transferred
to the site B by using db link.
I would like to create the jpg files from the BLob table of "the site B".
I want to do this by using pure PLSQL.
Best Regards.
Message was edited by:
user507290

How do I remove images from aperture?

Totally new to apple and aperture so I apologise if this seems like a somewhat noob question but how do I remove images from aperture (using the latest version, 3.4.1)? Coming from a PC and using lightroom I'm used to being able to remove images in two ways:
- removing the image from the "library", so that it no longer shows up in the program at all but is still on your hard drive (when I say removing it from the program entirely, I mean entirely, i.e. not sitting in a trash can or some other place where it's still taking up memory)
- deleting the original image off the hard drive
Is it possible to do either of these things in aperture, on both just a single image or a selection of multiple images, and if so how? I've tried googling this already and am getting a bunch of mixed solutions, none of which have really worked so far, so any answers would be appreciated. Thanks!

The answer partially depends on whether you have a managed or referenced library. Since you're totally new to Aperture, I'm assuming you have a managed library since that's the default.
FYI: Managed means Aperture handles image files and places them inside the library file. Referenced means you manage the image files and Aperture only points to (references) them.
For a managed library, select an image you want to delete. Type command-delete. (That's the reverse delete key next to the "=" key). (You can also right-click an image and choose Delete Version) That will remove the images from their Project and place in the Aperture Trash. They're still taking up space in the Trash. If you really want them gone for good, right-click the Trash in the library pane and select Empty Trash. Poof.
For a reference library, I forgot the exact details since I don't use this type of library, but you'll be asked (or can check a box) to delete the original file from the disk.

How do I remove images from Notes app?

How do I remove images from Notes app?
I sometimes find that, when cutting and pasting text from the web, an image is also copied (pretty much at all times I try and avoid this, but sometimes the selection process doesn't allow for fine enough control - e.g. a whole block of content may be selected, rather than just the few words I'm trying to copy).
I then find, once it's part of my note, that I cannot select the unwanted image and remove it. Can anyone tell me if this is something that can be done, and if so... how?
Thanks, Sebastain

Hi Drew & Kilgore*
Thanks for your replies. I also have and use Simplenote, although I went off it for a while, when it started crashing all the time on me. It seems to be more stable again now, so I'll start using it more regularly again, perhaps.
I am, obviously, disappointed that one can't simply select ANY object within a Notes document and choose to delete it. As I rather suspected, the only solution is an annoying workaround. Apple stuff seems to get more like this as time goes by. At least in my experience.
I solved the issue my own way in the end, but I guess it was close to your 1st idea DR, and your 2nd option, KT: I basically cut and pasted everything above, and then everything below, the image, and pasted both chunks of text into a new note. So it took two passes, and left me with the original note just displaying the image, which I then trashed.
Tapping to the right of the image followed by deletion was what I hoped & expected would work. But instead the image stayed put and the text below the cursor would simply slide along the right hand side, moving upwards as I deleted! Most bizarre, to my mind at least.
Anyway thanks for the feedback. But, for anyone else that might want to know how to do this, the answer is: NO, you can't select and delete an image once it's in one of your notes!
* I quite recently watched the rather strange Bruce Willis / Nick Nolte 'Breakfast of Champions' movie... I think I still prefer the book to the film!

How to create an image viewer

i need to know how to create an image viewer would appreciate
help thanks

you can use loadMovie() to load a jpg image into flash (and
if you're using flash 8 you can load other image formats into
flash) and use it to create an image viewer.

How can I remove an object using Photoshop Elements 7?

How can I remove an object using Photoshop Elements 7?

You could probably use the 8 point garbage matte in this situation. I personally think the 8-point garbage matte is a bit cumbersome, but it should get the job done.
1. Use the Razor Blade tool to place a cut before and after the shot with the bottle.
2. Select the bottle clip.
3. Press and hold Shift + Option, then drag the bottle clip up one track. This should create a duplicate clip directly above your original clip. (I'll refer to this duplicated clip as bottle2.)
4. Locate the 8-point Garbage Matte filter and apply it to bottle2.
5. Locate the Gaussian Blur filter and apply it to bottle2.
6. Control click bottle1, and uncheck the "Clip Enable" setting from the shortcut menu. This will disable that clip.
7. Double click bottle2 to load it into the Viewer. Then select the Filter tab.
8. For the Garbage Matte filter, you'll notice 8 rows of numbers, these are the current locations for the control points, which you should be able to see in the Canvas. Start with point #1, and click the "+" button in the filters area, then in the Canvas click and drag to move the point. When you release the mouse button, you'll need to reclick the "+" button in the filters tab. Repeat these steps until you've isolated the bottle.
9. Feather the edge of the matte.
10. Adjust the Blur amount.
11. Reenable bottle1. Playback the clip and make any necessary adjustments.
Depending on your experience with Motion, you might also want to try sending bottle1 to Motion, then use Motion to control the layering.

How do I remove recovered photos (used photorec to recover lost photos) to have more space in my macbook pro HD?

How do I remove recovered photos (used photorec to recover lost photos) to have more space in my macbook pro HD?

Hello there, Shrid.
The following Knowledge Base article reviews how to Sync photos:
iTunes: Syncing photos
http://support.apple.com/kb/HT4236
You will just sync to the new computer. Keep in mind:
Additional Information
Syncing photos with your device will create an iPod photo cache.
Syncing photos can only happen from one computer or user account at a time. Syncing photos with a different computer or user replaces the photos on the device.
You can't reimport pictures synced from your computer to your device back to your computer. You can only import pictures in the Camera Roll or Saved Photos from your device to your computer. If you need to retrieve synced photos from your device:
Email them from the device to yourself.
Copy them from the emails to your computer.
On iPhone and iPod touch using iOS 5 and iOS 6, all synced photos will appear in a unified category called photo library. Photos are not duplicated; this is a way to view all synced albums in one place. You can also tap a specific album beneath photo library to view individual albums.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

How do I remove red eye using ps Touch

How do I remove red eye using PS Touch on a Samsung Galaxy Note 10.1 Tablet

In addition to Warunicorn's helpful forum post, I have assembled a quick tutorial on how to remove redeye quite quickly.
1. Below is an image with red eye
2. Select the paint with effects tool. Select the effect, and select Black and White.
3. Adjust the size of the brush to make it the size of the eye.
4. Zoom into the image, and start to remove the red eye.
5. Now you have quickly removed the red eye!
Please ask if you have any questions
Janelle

How can I remove a flag using a rule in Mail.app?

I'm using Mail Act-On to flag messages that are important. I also have got a smart mailbox that displays only those messages that are flagged, this is my "To Do" mailbox.
Once I've read and answered the message I want to remove the flag, preferrably via a rule using Mail Act-On as well. However in the rules dialog in the Mail.app preferences there's only the option to set a flag, not to remove one.
Can anyone help: how can I remove a flag using a rule?? Maybe via Applescript as the last resort?
Thanks for any advice Jan

Hi Jan
I haven't gotten around to put unread and unflag into Mail-ActOn but MailTags has the functionality. MailTags also allows you to mark a message unread via act-On rule.
It is interesting to note that apple doesn't include unflag and unread as the rules were originally intended to apply only to new messages (of which none should be read or flagged) with that logic, there would be no need for unread, unflagg.
@David: The reason to do it via Act-On rule would be to set up a sequence of events, one of which is to unflag, others may be to set keywords, move messages, set colors etc.
Scott

How to import the image by using java application

1.how to import the image by using java APPLICATION and display it on the textarea that you have been created.
2.how to store the image into the file.
3. what class should i used?
4. how to create an object to keep track the image in java application.
* important : not java applet.
plzzzzzzz.
regards fenny

follow the link:
http://java.sun.com/docs/books/tutorial/2d/images/index.html

How do I redact a screenshot using preview

I want to send a screenshot of a bank statement but do not want all the information to be seen. How do I redact the screenshot using Preview?

Tony T1 wrote:
Then, just to be safe, print as PDF
Are you sure about that?
/Users/jdaniel/Desktop $ grep --binary-file=text redact how\ do\ I\ redact\ a\ screenshot\ using...:\ Apple\ Support\ Communities.pdf
(how do I redact a screenshot using...: Apple Support Communities)
/Users/jdaniel/Desktop $ grep --binary-file=text redact redacted.pdf
(how do I redact a screenshot using...: Apple Support Communities)
/Users/jdaniel/Desktop $ grep --binary-file=text redact redacted.pdf
(how do I redact a screenshot using...: Apple Support Communities)
/Users/jdaniel/Desktop $ grep --binary-file=text redact redacted_print.pdf
(how do I redact a screenshot using.../ Apple Support Communities)
Save as PNG or JPEG and then send it.

How to reverse an image acquired using IMAQ APIs in vc++

how to reverse an image acquired using IMAQ APIs in vc++

When using imaqFlip, may the source and destination be the same Image* ?
TIA!
Jesse

How do I drag simultaneously mulitple images viewed in Preview to Finder. I know how to do one image at a time by dragging

How do I drag multiple images simultaneously from Preview to Finder. I know how to do one at a time. However since I typically shoot at 12 frames per second, sports photography, I have a lot of images to move of one athlete while in motion.

(A personal footnote):
Why are you using Preview at all? I hardly ever use it for anything, finding it very limited.
I am only an amateur photographer, but I much prefer GraphicConverter which, for example, in batch mode would do much of what you ask.
IMO it is probably the best shareware application ever written for the Mac.
If you don't know it, give it a try:
http://www.lemkesoft.com/content/188/graphicconverter.html

How do I edit image viewer slideshow created in CS3, in CS4?

I apologize for posting this twice...once in a previous post and once here. The reason being...the other post was old (2008) and I'm afraid it might get overlooked. So I thought I'd create a new discussion.
I created a bunch of slideshows in CS3 using Insert - Media - Image Viewer. I was looking for an easy way for my client to update the site themselves. Even though it creates a Flash element, it is easy for them to go in and switch out the images. All they do is click on the slideshow box, hit Window - Tag Inspector and click on the little folder at the side of the Image URLs' line. Nothing could be simpler. Well...I went in to see my client to show her how to do this but she has CS4. When I tried to do the same thing, nothing looked the same. The tag inspector did not have the same elements in it at all. Does this mean she cannot edit the slideshows I have created? Ugh...
If anyone can help with a work around to this...I'd be very grateful!
Thanks.
Pam

Thanks for your reply via e-mail David. I tried to reply but it's a no reply address so I'm posting here:
Do you happen to know if my client who has CS4 would be able to open the slideshows I created in CS3 using the method mentioned here:
http://help.adobe.com/en_US/Bridge/3.0/WSCF044571-2772-4d28-9EBD-2C9F46AF008A.html
Not having CS4, I can't even play around with it to see. Or will the slideshows have to be recreated in CS4? Has my work in CS3 over the months gone to waste in other words?
Alternatively, would it be better for us both to purchase a $29 Dreamweaver extension such as the one below, so we could both access the slideshow from CS3 and CS4 at the same time?
http://www.dwuser.com/flashslideshow/v3/
I need to keep building the new site using the slideshows while she maintains the old site (no slideshows) until we upload the new site this summer. I don't want to continue building slideshows she cannot access.
Thanks a lot for your help!
Pam

How do I remove the Skype Translator preview!?

Hi.
So hard to even find where to submit a question!
Please help. I just want to uninstall! No entries found in add remove programs. How do I remove the translator preview!?
I'm now using skype for my new postion and I can't affort to be a part of the translator preview. It's affecting my system stability. System is acting wonky and I'm getting many entries in my system log:
Log Name: Application
Source: Microsoft-Windows-Immersive-Shell
Date: 5/22/2015 4:09:33 PM
Event ID: 5973
Task Category: (5973)
Level: Error
Keywords:
User: HPENVY\Dwaine
Computer: HPEnvy
Description:
Activation of app Microsoft.SkypeTranslatorPreview_kzf8qxf38zg5c!App failed with error: The app didn't start in the required time. See the Microsoft-Windows-TWinUI/Operational log for additional information.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Immersive-Shell" Guid="{315A8872-923E-4EA2-9889-33CD4754BF64}" />
<EventID>5973</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>5973</Task>
<Opcode>0</Opcode>
<Keywords>0x2000000000000000</Keywords>
<TimeCreated SystemTime="2015-05-22T23:09:33.219596200Z" />
<EventRecordID>167617</EventRecordID>
<Correlation />
<Execution ProcessID="5600" ThreadID="26552" />
<Channel>Application</Channel>
<Computer>HPEnvy</Computer>
<Security UserID="S-1-5-21-4075998385-1554398878-[removed for privacy]-1001" />
</System>
<EventData>
<Data Name="AppId">Microsoft.SkypeTranslatorPreview_kzf8qxf38zg5c!App</Data>
<Data Name="ErrorCode">-2144927142</Data>
</EventData>
</Event>
Subject/title text switched with another of the author's sentences in order to reflect post content.

Hi,
Are you trying to remove Skype entirely, or just get rid of the tool tray icon?
IIRC, you get that icon as long as Skype is running in the background. There's a checkbox in Skype options that will keep it from running on startup. That will eliminate the icon but you won't get notified for incoming calls.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

How do I remove images viewed using preview?

Similar Messages

Maybe you are looking for