How do I return to the start of the current selection?

In Audtion 3 and earlier, if I wanted to hear currently selected audio, I just made the selection in the Waveform Editor, pressed Play and the selection would play.  It would play the same selection again if I stopped playback and pressed Play again.  In CS5.5 and 6 this only seems to work the first time you press Play after selecting some audio.  After that, the audio just resumes from when it last stopped.
Is there any way to get the current time indicator to return to the beginning of a selection?
Robert

I find it to be quite consistent in its behaviour. But if you want to investigate the possibilities, go to Edit>Preferences>Playback, and you have several self-evident options to alter it.

Similar Messages

  • The new tab behavior is driving me nuts. It keeps re-centering on tabs nearest the start of the list when I move a tab. How do I change this?

    The new tab behavior is driving me nuts. It keeps re-centering on tabs nearest the start of the list when I move a tab. How do I change this?
    I don't want to download an app. I would rather add a new string in about config or just change of the ones in there to false. It's making my work life rather difficult, to be forced to go all the way back to the end of my list after moving one tab just to have to do it again. I mean it's to the point where I might consider changing browsers if they had tab scroll bars.
    Edit: At this point I will download any app. Please make this stupid feature stop.

    The result of setting up that code will do exactly as you described: the tabs will be crowded together. I had not noticed any change in behaviour of Firefox with tabs because all the tabs are crowded together, so they cannot scroll, and I very seldom move tabs.

  • Pages IPad: how to  'Find' occurrence of a word in a range starting from somewhere in the middle of document to the end. It seems that 'Find' feature always defaults to finding the word from the start of the document. Thanks

    Pages IPad: how to  'Find' occurrence of a word in a range starting from somewhere in the middle of document to the end. It seems that 'Find' feature always defaults to finding the word from the start of the document. Thanks

    Pages IPad: how to  'Find' occurrence of a word in a range starting from somewhere in the middle of document to the end. It seems that 'Find' feature always defaults to finding the word from the start of the document. Thanks

  • Where is the start of the audio file/recording?

    I'm emailing mixdowns to a studio where they will lay the files to movie timecodes that I have specified in a cue sheet. I'm a bit worried that the timecodes are incorrect. The possible issue concerns the start of the audio files.
    I recorded the tracks down to a stereo file, a region, that appears to start in the arrange at the correct point. But when you record, Logic includes some recording before the start of the region, before the Anchor, correct? And my question is this: when the files are opened in ProTools, does Protools see the Anchor, see the start of the region and ignore the bit before the region starts, or not?
    It's crucial, because if it doesn't all my in-points will be out but over a second (by the amount of time before the region start that somehow seems to exist in the audio file.

    Hi
    If I understand the problem correctly?
    jrm1 wrote:
    The possible issue concerns the start of the audio files.
    I recorded the tracks down to a stereo file, a region, that appears to start in the arrange at the correct point. But when you record, Logic includes some recording before the start of the region, before the Anchor, correct?
    This can depend on how you did the "record down to a stereo file".
    If you routed tracks to bus channels, then recorded the bus to another track, Logic will include the count-in in the audio file. As you say, the region in the Arrange will be correctly "trimmed".
    One solution would be to convert these bounced regions to new audio files (Audio Menu), another to use Bounce Region (or track) in Place.
    Alternatively, use a manually placed "2 pop" 2 seconds before the start of each cue.
    CCT

  • When watching youtube the video randomly jumps to the start of the video even if the cursor is not on the video.

    When watching youtube the video randomly jumps to the start of the video even if the cursor is not on the video. This happens randomly and does not seem to be a problem with the videos as they run fine. what is going on?

    Several times every day YouTube shuts down some of their servers to update stuff. Be patient if YouTube is slow, stuck or mangled. Transmissions from YouTube to your computer are done in multiple tiny packets of data and flash at a time. That's why sometimes you may get any of these scenarios: bits and pieces of text/thumbnails in weird places; sluggish loading/buffering; the spinning circle going on forever; or the player being blank. This problem could fix itself within a few hours or by the next day.
    If your YouTube continues to behave slow, stuck or strange, it's very possible that your directories of "temporary internet files" and RAM (sometimes known as "cache") are close to the maximum and just cannot take anymore, the end result being any of the above scenarios or videos that: A) come to a complete freeze; B) start/stop/start/stop in a choppy way; or C) never even make it onto your screen.
    "Temporary internet files" are tiny bits of webpages that get permanently put on your hard-drive. They will remain forever on your computer, gradually plugging it up like hair stuck in a sink drain, until you finally get rid of them once and for all. Thus, exit out of YouTube, then clear your "cache" of all its "temporary internet files", "cookies" and "history". It is best if you shutdown and reboot afterwards. You'll be amazed at how "fresh" and "new" your YouTube will be.

  • Scrolling with mouse wheel in column browser starts from the start of the list

    Hi, I'm wondering if anyone else has been encountering this problem with iTunes.
    Ever since updating to 10.5, whenever I use the mouse wheel to scroll in the column browser, it starts from the start of the list, regardless of which artist or album is highlighted.
    For instance, I press the M key to jump to artists starting with M, then use the mouse wheel to scroll down the list, in iTunes 10.5 it jumps me back to the As.
    The strange thing is that if I then use the mouse wheel to scroll down to the Cs, then jump down the list via a key press, mouse wheel scrolling will start me back to where I last scrolled (C).
    How can I fix this problem?
    I'm using iTunes 10.5.0.142 on Windows 7 Home Premium.

    I can confirm the behaviour. It would seem iTunes is keeping a separate record of the position in the list for use by the scroll wheel, and then snapping to that before scrolling up or down a screenful. The same random jumps happen if you use the keyboard Page Up/Page Down commands and then use the mouse wheel.
    I shall file a bug report.
    tt2

  • My IP7250 is suddenly printing a bright horizontal line at the start of the page and a dark horizont

    My IP7250 is suddenly printing a bright horizontal line at the start of the page and a dark horizontal line at the end.
    Every time the lines are printing in the exact same place.
    it happens mostly when prining involves blue colors.
    the line are approx. 1 cm wide.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • Problems with "Background Eraser Tool" and "Blur". The tools don't affect the whole area but just connect the start and the last points.

    Hello!
    I have some issues with Photoshop CC 2014. The tools "Background Eraser Tool" and "Blur" won't work correctly. When I’m holding down the left mouse button and trying to erase or blur some area, the tools don’t affect the whole area but just connect the start and the last points – like drawing a line. These troubles exist with mentioned tools only, other tools work correctly.
    I’ve restored each tool separately, restored all the tools together, installed new drivers for tablet, re-installed Photoshop and even Windows. Nothing helped. These tools worked correctly earlier with the same adjustments, but one day something went wrong.
    How can I make the tools work correctly?
    Some information about my computer:
    • Notebook Lenovo Y560
    • Windows 7 Home Basic SP1 x64
    • Intel Core i5 2.53 GHz
    • 4Gb RAM
    • ATI Mobility Radeon HD 5730 1Gb
    • Tablet Wacom Bamboo CTL-470

    Hi,
    I have a similar problem with the Background Eraser tool as well. It's the same both on my PC and on my laptop, both running Win 8.1 and PS CC2014. Would be great to have a solution for this. Did you managed to find a fix?

  • Click/Noise at the start of the track.

    I heare a strange loud noise when the track changes?
    Anybody knows how to repair this ???
    Thanks.

    Check the start of the track in question in a sample editor. If the waveform doesn't start at the zero crossing point, write a fade-in so it does.
    Hop that helps.

  • I have a powermac dual g5 2.0 that wont start up.When I plug it in I get the click from the power supply. When I hit the start button, the white led on the front panel lights up and stays lit. No whir sound from the hard drive or the fan. No lights on the

    I have a powermac dual g5 2.0 that wont start up.When I plug it in I get the click from the power supply. When I hit the start button, the white led on the front panel lights up and stays lit. No whir sound from the hard drive or the fan. No lights on the motherboard

    The click usually indicates a big problem, but...
    How to reset the SMU/PMU on a Power Mac G5 (Late 2004) or Power Mac G5 (Late 2005) ...
    http://support.apple.com/kb/HT1436
    Earlier G3, G4, G5 models...
    http://support.apple.com/kb/HT1939
    Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
    See which one your G5 has...
    http://eshop.macsales.com/item/Newer%20Technology/CR2032/ 
    http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/ 

  • How to schedule the background job using current selection screen field val

    Hello Friends,
    How to schedule the background job using current selection screen field values.
    after completion of the job the spool should be sent as a mail to SAP Inbox.
    Is there any way to create the variant dynamically by reading the current selection screen values.
    Thanks,
    Ravi

    Hi,
    To get the variant details you can use teh following FM.
    'RS_VARIANT_CONTENTS'.
    Regards,
    Ankur Parab

  • The indicator to determine whether it is a case of the start or the finish

    Hello Gurus,
    In CJ20N, for internal activities, there is a "Person assignement" tab. And in this tab there is "date" field.
    The explaination of this date is:
    "Latest date for the start or finish of the split.
    You can use the indicator to determine whether it is a case of the start or the finish date."
    My problem is: where can I find the "indicator" mentioned?
    Thanks
    JM

    There is no specific indicator for this.
    Go to internal tab - you will see a field called DistKeyCapRqIn
    if this is blank then the system goes to the work centre master data for distribution of work load - if the work centre is blank then system defaults to earliest dates - which gets transferred to the person assignment tab.
    Now go bak to the internal tab and set field DistKeyCapRqIn to SAP030 - you will now see that the dates in the person assignment are showing latest dates.
    The dates for the activities can be seen based on scheduing in the dates tab

  • HT201240 hi all. i just downloaded mountain lion and it seems to have added an old password for admin at the start up, the old password was removed so all i had to do was press enter and off i go, i cant remember it, what to do now??

    hi all. i just downloaded mountain lion and it seems to have added an old password for admin at the start up, the old password was removed so all i had to do was press enter and off i go, i cant remember it, what to do now??

    Eli,
    You can reset a Password (lost/forgotten) set on your Mac using 'Reset Password Utility' available with OS X Utilities tool. With OS X Mountain Lion, OS X Utilities tool can be generally found on a local hidden Recovery HD Partition if your Mac has one.
    To check If your Mac has got a local hidden Recovery HD Partition, start your Mac holding COMMAND + R buttons. If you hold the keys pressed enough and there is a local Recovery HD Partition on your Mac, you will be presented with OS X Utilities window.
    Click the 'Tool' menu item and choose 'Reset password'. Terminal window appears. Type 'resetpassword' into it and press 'Enter'. Reset Password window appears with User Account Names available on your Start-up Volume. Select the User Account Name and rest is simple to follow.
    One of the advantages of this method is that it does not require any Authorization method such as administrative authentication to reset a password.
    NOTE: If your Mac does not have a local hidden Recovery Partition on its system disk, you can create one using Disk Assistant application available from Apple. Search for the Disk Assistant in the support area.

  • How to get the specific name of the workset which is currently selected by the user in sap portal 7.0

    Dear Expert,
    I have one requirement like to read the selected workset name in portal by the current user.I have read two documents regarding how to retrieve the PCD contents (iViews, Pages, Worksets and Roles) and its properties like Created by, Changed by, Last changed by and others using PCD API.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6112ecb7-0a01-0010-ef90-941c70c9e401?overridelayout=true
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/508baf88-9335-2d10-efa6-c6ad61e5fc4b?quicklink=index&overridelayout=true
    But I am not able to understand how to get the specific name of the workset which is currently selected by the user.Can you please help me.
    I am using portal 7.0.
    Thanks & Regards,
    Patralekha

    Hi Expert,
    I found that we can use Interface INavigationHelperService to read Portal Role selected by user at runtime from http://scn.sap.com/thread/52194
    But this class is available in SAP NetWeaver 7.30 Enterprise Portal .
    But in SAP NetWeaver 7.0 Enterprise Portal that interface is not available.
    INavigationService is available there.
    But didn't get any proper discussion on this interface for the same requirement.
    Can you please help me.
    Thanks & Regards,
    Patralekha

  • [svn:fx-trunk] 13358: Manually removing extraneous whitespace from the start of the en_US playerglobal rb DITA XML files to unblock the build .

    Revision: 13358
    Revision: 13358
    Author:   [email protected]
    Date:     2010-01-07 17:10:34 -0800 (Thu, 07 Jan 2010)
    Log Message:
    Manually removing extraneous whitespace from the start of the en_US playerglobal rb DITA XML files to unblock the build. We need to work with the doc team to make sure future drops do not contain this whitespace.
    QE notes: N/A
    Doc notes: N/A
    Bugs:
    SDK-24896 - playerglobal_rb.swc has dita content that is not encoded correctly
    Reviewer: For Jim, Jeff
    Tests run: ant other.locales
    Is noteworthy for integration: Yes
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-24896
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/__Global__.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/air.net.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/air.update.events.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/air.update.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/authoring.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.accessibility.xm l
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.data.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.desktop.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.display.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.errors.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.events.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.external.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.filesystem.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.filters.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.geom.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.html.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.media.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.net.drm.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.net.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.printing.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.profiler.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.sampler.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.security.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.system.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.text.engine.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.text.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.ui.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.utils.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.xml.xml

    Thats good news.

  • When I use my ipod in the car it goes back to the start of the track every time i start the car. why is this?

    When I use my ipod in the car it goes back to the start of the track every time i start the car. why is this?

    Only if you backed them up somewhere.

Maybe you are looking for

  • Call a transaction with Application WD ABAP

    Dear Expert. In this moment I have the following requirement: I created an Application WD ABAP and created a button that must call a transaction of R/3 in the portal. I created a Transaction Iview and for this iView I created a Page. Now I want that 

  • Supplier Quote fails creating PO when the Price is in different Currency

    Hi Experts, We are working with SRM 7.0 in Classic Scenario. When the Bidders are allowed to BID in different Currency and the winning Supplier Quote with this new Currency fails to transfer to Backend and getting error as SE 134 XXXXXXXX (Item Descr

  • Camera jams when using in messages

    While taking a photo from within messages, either the text line doesn't disappear or half the camera face shows. The only way to "un-freeze" is to close the app, double click and close app again. This is happening most of the time, even after a hard

  • Need an event that fires for child containers on tabnavigator change

    I have a tabnavigator with canvas containers representing pages in a web app. What event can I attach to each canvas container's implementation actionscript file that will fire whenever that canvas comes into view via the tab selection? (sort of like

  • Installing D530 drivers on mac pro OS X 10.8.2

    I have tried repeatedly to get my mac pro to recognize the scan gear and MF printer drivers & utilities and have not ben successful. Solved! Go to Solution.