How do I set the Launch window size (from launch from an LMS) in Captivate 5.5?

When my project launches from the LMS, the lauch window is smaller that the actual project size and requires the user to resize the window to see the whole project. My LMS administrator tells me that the launch window size is not controlled by the LMS so I am trying to figure out how I can set this to match the project dimensions.

The size of the browser window CAN be controlled by the LMS, but some LMSs are hopeless in this area and don't provide the settings to do so.
Moodle for example allows you to specify that the course content will open in a new window each time an item in the LMS TOC is clicked and what the height and width of that window will be. However, all versions of SumTotal before the latest one did not give you this option (and that despite the exhorbitant price difference between these two products.)
So your LMS admin might be correct in that HIS particular LMS cannot control the size of the launch window, but that's not because no LMS can do this.

Similar Messages

How do I set the default window size when I open a Numbers 3.0 document

How do I set the default window size when I open a Numbers 3.0 document?
When I open an existing document it always open too small, I resize it but next time I open it it's small again! Please help! I used to be able to resize them then they stayed that size until I resized it no matter how many times I opened and closed it before upgrading to 3.0!!!!

This document can help you set the print settings for any type of printing. Not just for photos as the title suggests. You should not have to keep setting it every time.
Printer settings
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

How can I set the value to a session bean from backing bean

Hi Experts,
How can I set the value to a session bean from backing bean where I have created getter and setter
methods for that variable.
Basically I am using ADFUtils class where I am able to get the value from session bean
using following expression
String claimType =
(String)ADFUtil.invokeEL("#{ClaimValueObj.getClaimType}");
Thanks
Gayaz

Gayaz,
Wrong Post !!
Post in JDeveloper and ADF
Thanks
--Anil

How do I set the default view size when I open a word.doc from mail

I use the mail program all day long and open MS Word docs and the size is default of 100% but the actually view of the screen make it look like a font of 7 or 8
I have a difficult time even viewing the document until I blow it up to 150%. It's not because I'm blind I have excellent vision..
HOW DO I SET THE DEFAULT VIEW OF DOCUMENTS

This document can help you set the print settings for any type of printing. Not just for photos as the title suggests. You should not have to keep setting it every time.
Printer settings
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

How can I change the default window size of a new message permanently?

The mail window opens up very small and every time I must increase the size manually. I want to be able to set it so it opens larger or at least opens to the saem size as a previous mail window, which is what Mail used to do.
Also, can anyone tell me how to stop that new mail window from opening on the bottom left of my screen? I need to move it in orde to increase the window size. So, 2 default actions that are a psin to constantly deal with.
Is there any guru out there who has had this problem and solved it? Thanks!

http://kb.mozillazine.org/Font_settings_in_Thunderbird

How can I set the finder window to open the same way every time?

Everytime I open Finder it goes back to it's default view which is just too small, but I want to set the finder columns and window so that they open the same exact way every single time. I'm tired of resizing everything.
Currently I have to resize every window and column everytime and I think my work is much slower then when I was on Windows because of it.
Is there a setting, script, file, patch, anything, is there absolutely anything I can do to actually control the Finder views and make them adjust to MY criteria and stay that way...

That is a big negative. That does absolutely nothing other then close my window, next time the finder window is opened then the column widths are small again.
In Windows Explorer all your windows are customizable, how do I do this with Finder?

How do I set the default page size for printing on a 8450.

A few days ago I printed some envelopes and now when I print from some programs, the print page size has remained the envelope size. I want to print from any program on letter size paper without changing the settings every time.
Thanks
This question was solved.
View Solution.

This document can help you set the print settings for any type of printing. Not just for photos as the title suggests. You should not have to keep setting it every time.
Printer settings
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

How can I close the Appearance window? screen? from System Preferences?

I am still trying to get used to my new Intel IMac and was exploring. After I looked at Universal Access, two things happened:1) the menu bar at the top and the display got large and I can't seem to return them to the original setting and 2) the Appearance window now won't go away--it allows me only to minimize it and it seems to be preventing me from accessing System Preferences. I have been working on this all morning and I'm stuck. Please can anyone help?

A foolish question on my part, perhaps, but have you tried restarting the computer?

How do i set the transparency of an image retrieved from a database? (image was stored as blob)

I had stored a png image into a database, when i retrieve it and display it the background is no longer transparent?
I am loading the blob returned from the select statement by using the "loadBytes" method of the "UILoader" class.
Thanx in advance
gv1979

If you want to stick with adjusting the scale you can do this two ways. Edit the value graph or edit the speed graph.
The problem is that a camera move, a zoom or a dolly in, is not linear and scale is. This means the graphs are not a good representation of what you'll see visually. This makes them hard to use. At a constant rate for scale the appearance is that the increase in size slows down to closer you get to the final value. In other words, as you scale an object up at a constant rate, the visual appearance is a gradual slowing.
A speed graph edited to look like this gives the appearance of a constant rate scale of the layer when you expect an acceleration at the end. There's just not enough granularity in the graph editor or enough control to predictably achieve the results you want.
You'll have better luck editing the value graph to look something like this:
While this looks extreme, you will get closer to achieving the results you want using the value graph. Once again, the amount of control and the resolution of the graph combined with the visual tomfoolery that scaling an object brings with it makes this a difficult way to achieve predictable results.
You select the graph you'll edit by clicking on the second icon from the left.
As I said before, you'll have much better luck getting the look you want if you make the layer 3D and move a camera toward it.

How can I set the default window location in calendar to my second monitor?

After installing Mavericks, Calendar always opens its windowed centered in my main monitor. I move it to where I want it (upper left, second monitor) but when I quit the program, the location reverts to the original location. Is there a .plist I need to edit?
-Jeff

The "quit calendar" fix does not endure after the next logout or restart.
In System Preferences, in the Mission Control Pane, unchecking "Displays have separate spaces" causes the windowing behavior to revert to pre-Mavericks behavior. Applications open in the previously used window. Applications with windows on multiple monitors re-open with correctly located windows. However, all the behavior reverts, so you can't run multiple full screen applications on different monitors, nor is there a tool bar at the top of secondary monitors.
-Jeff

How do I set the default directory that adobe opens from and saves to.

Every time I open a document, adobe looks for files in skydrive. To get to my files, I have to back up a level, change to the c: drive, go to users, and then pick the folder my files are in. Does anyone know where I can find and change the defalt file location.

Thank you for your reply Rob. That is a pity because I have loaded some 500 eBooks and each Cover page appears in the Navigation sidebar with real Pictures and Videos interspersed seemingly randomly. I have also tried to move my stuff into separate folders called Pictures and Videos. Wheareas the Pictures moved successfully, the Videos didn't show in the Videos Folder. I think this is a bug.
Is there another Media Player on the HP App site that is worth trying?

How do I set the window size of a course in SumTotal (LMS)

I recently created an AICC course using Captivate 5.5 for a client using SumTotal as their LMS. When the client loads the course, the course launchs in a window that is smaller than the course itself; the user then has to adjust the window size to view the entire course. I have read on various posts that this cannot be controlled by myself through the .htm file settings, and that this has to be set within the LMS.
So my question is: Where and how does the client set the course window size within SumTotal? Does anyone know?!
thanks

No, edit the html files that come with Captivate. Either hand edit the
html file that is produced every time you publish, or locate the files
in the Captivate 5 directory and customise them to suite your needs.
Steve

How do I set a fixed page size in Muse so that the window always stays the same size

how do I set a fixed page size in Muse so that the window always stays the same size

Hi Aish & thanks for responding;
I would like the window size to stay the same for the entire site and not be
able to scale to drag & scale it. ie 950 pixels x 500 pixels.
Thanks,
JB
On 12/4/14 3:30 PM, "Aishvarya Raj Rastogi" <[email protected]>

How do I set the frame size

I am Making a program for purchasing games, with the basic layout alsot done, except on problem. When the purchase button is pressed, a dialog shows up but nothing is seen until i resize it. How would i set the frame size so that i do not need to resize it each time? below is the code for the files. Many thanks in advance.
CreditDialog
import java.awt.*;
import java.awt.event.*;
class CreditDialog extends Dialog implements ActionListener { // Begin Class
     private Label creditLabel = new Label("Message space here",Label.RIGHT);
     private String creditMessage;
     private TextField remove = new TextField(20);
     private Button okButton = new Button("OK");
     public CreditDialog(Frame frameIn, String message) { // Begin Public
          super(frameIn); // call the constructor of dialog
          creditLabel.setText(message);
          add("North",creditLabel);
          add("Center",remove);
          add("South",okButton);
          okButton.addActionListener(this);
          setLocation(150,150); // set the location of the dialog box
          setVisible(true); // make the dialog box visible
     } // End Public
     public void actionPerformed(ActionEvent e) { // Begin actionPerformed
//          dispose(); // close dialog box
     } // End actionPerformed
} // End Class
MobileGame
import java.awt.*;
import java.awt.event.*;
class MobileGame extends Panel implements ActionListener { // Begin Class
     The Buttons, Labels, TextFields, TextArea
     and Panels will be created first.
     private int noOfGames;
//     private GameList list;
     private Panel topPanel = new Panel();
     private Panel middlePanel = new Panel();
     private Panel bottomPanel = new Panel();
     private Label saleLabel = new Label ("Java Games For Sale",Label.RIGHT);
     private TextArea saleArea = new TextArea(7, 25);
     private Button addButton = new Button("Add to Basket");
     private TextField add = new TextField(3);
     private Label currentLabel = new Label ("Java Games For Sale",Label.RIGHT);
     private TextArea currentArea = new TextArea(3, 25);
     private Button removeButton = new Button("Remove from Basket");
     private TextField remove = new TextField(3);
     private Button purchaseButton = new Button("Purchase");
     private ObjectList gameList = new ObjectList(20);
     Frame parentFrame; //needed to associate with dialog
     All the above will be added to the interface
     so that they are visible to the user.
     public MobileGame (Frame frameIn) { // Begin Constructor
          parentFrame = frameIn;
          topPanel.add(saleLabel);
          topPanel.add(saleArea);
          topPanel.add(addButton);
          topPanel.add(add);
          middlePanel.add(currentLabel);
          middlePanel.add(currentArea);
          bottomPanel.add(removeButton);
          bottomPanel.add(remove);
          bottomPanel.add(purchaseButton);
          this.add("North", topPanel);
          this.add("Center", middlePanel);
          this.add("South", bottomPanel);
          addButton.addActionListener(this);
          removeButton.addActionListener(this);
          purchaseButton.addActionListener(this);
          The following line of code below is
          needed inorder for the games to be
          loaded into the SaleArea
     } // End Constructor
     All the operations which will be performed are
     going to be written below. This includes the
     Add, Remove and Purchase.
     public void actionPerformed (ActionEvent e) { // Begin actionPerformed
     If the Add to Basket Button is pressed, a
     suitable message will appear to say if the game
     was successfully added or not. If not, an
     ErrorDialog box will appear stateing the error.
          if(e.getSource() == addButton) { // Begin Add to Basket
//          GameFileHandler.readRecords(list);
               try { // Begin Try
                    String gameEntered = add.getText();
                    if (gameEntered.length() == 0 ) {
                         new ErrorDialog (parentFrame,"Feild Blank");
                    } else if (Integer.parseInt(gameEntered)< 0
                              || Integer.parseInt(gameEntered)>noOfGames) { // Begin Else If
                         new ErrorDialog (parentFrame,"Invalid Game Number");
                    } else { // Begin Else If
                         //ADD GAME
                    } // End Else
               } catch (NumberFormatException num) { // Begin Catch
                    new ErrorDialog(parentFrame,"Please enter an Integer only");
               } // End Catch
          } // End Add to Basket
     If the Remove From Basket Button is pressed, a
     a suitable message will appear to say if the
     removal was successful or not. If not, an
     ErrorDialog box will appear stateing the error.
     if(e.getSource() == removeButton) { // Begin Remove from Basket
          try { // Begin Try
                    String gameEntered = remove.getText();
                    if (gameEntered.length() == 0 ) {
                         new ErrorDialog (parentFrame,"Feild Blank");
                    } else if (Integer.parseInt(gameEntered)< 1
                              || Integer.parseInt(gameEntered)>noOfGames) { // Begin Else If
                         new ErrorDialog (parentFrame,"Invalid Game Number");
                    } else { // Begin Else If
                         //ADD GAME CODE
                    } // End Else
               } catch (NumberFormatException num) { // Begin Catch
                    new ErrorDialog(parentFrame,"Please enter an Integer only");
               } // End Catch
          } // End Remove from Basket
     If the purchase button is pressed, the
     following is executed. NOTE: nothing is done
     when the ok button is pressed, the window
     just closes.
          if(e.getSource() == purchaseButton) { // Begin Purchase
               String gameEntered = currentArea.getText();
               if (gameEntered.length() == 0 ) {
                    new ErrorDialog (parentFrame,"Nothing to Purchase");
               } else { // Begin Else If
                    new CreditDialog(parentFrame,"Cost � 00.00. Please enter Credit Card Number");
               } // End Else
          } // End Purchase
     } // End actionPerformed
} // End Class
RunMobileGame
import java.awt.*;
public class RunMobileGame { // Begin Class
     public static void main (String[] args) { // Begin Main
          EasyFrame frame = new EasyFrame();
          frame.setTitle("Game Purchase for 3G Mobile Phone");
          MobileGame purchase = new MobileGame(frame); //need frame for dialog
          frame.setSize(500,300); // sets frame size
          frame.setBackground(Color.lightGray); // sets frame colour
          frame.add(purchase); // adds frame
          frame.setVisible(true); // makes the frame visible
     } // End Main
} // End Class
EasyFrame
import java.awt.*;
import java.awt.event.*;
public class EasyFrame extends Frame implements WindowListener {
public EasyFrame()
addWindowListener(this);
public EasyFrame(String msg)
super(msg);
addWindowListener(this);
public void windowClosing(WindowEvent e)
dispose();
public void windowDeactivated(WindowEvent e)
public void windowActivated(WindowEvent e)
public void windowDeiconified(WindowEvent e)
public void windowIconified(WindowEvent e)
public void windowClosed(WindowEvent e)
System.exit(0);
public void windowOpened(WindowEvent e)
} // end EasyFrame class
ObjectList
class ObjectList
private Object[] object ;
private int total ;
public ObjectList(int sizeIn)
object = new Object[sizeIn];
total = 0;
public boolean add(Object objectIn)
if(!isFull())
object[total] = objectIn;
total++;
return true;
else
return false;
public boolean isEmpty()
if(total==0)
return true;
else
return false;
public boolean isFull()
if(total==object.length)
return true;
else
return false;
public Object getObject(int i)
return object[i-1];
public int getTotal()
return total;
public boolean remove(int numberIn)
// check that a valid index has been supplied
if(numberIn >= 1 && numberIn <= total)
{   // overwrite object by shifting following objects along
for(int i = numberIn-1; i <= total-2; i++)
object[i] = object[i+1];
total--; // Decrement total number of objects
return true;
else // remove was unsuccessful
return false;
ErrorDialog
import java.awt.*;
import java.awt.event.*;
class ErrorDialog extends Dialog implements ActionListener {
private Label errorLabel = new Label("Message space here",Label.CENTER);
private String errorMessage;
private Button okButton = new Button("OK");
public ErrorDialog(Frame frameIn, String message) {
/* call the constructor of Dialog with the associated
frame as a parameter */
super(frameIn);
// add the components to the Dialog
          errorLabel.setText(message);
          add("North",errorLabel);
add("South",okButton);
// add the ActionListener
okButton.addActionListener(this);
/* set the location of the dialogue window, relative to the top
left-hand corner of the frame */
setLocation(100,100);
// use the pack method to automatically size the dialogue window
pack();
// make the dialogue visible
setVisible(true);
/* the actionPerformed method determines what happens
when the okButton is pressed */
public void actionPerformed(ActionEvent e) {
dispose(); // no other possible action!
} // end class
I Know there are alot of files. Any help will be much appreciated. Once again, Many thanks in advance

setSize (600, 200);orpack ();Kind regards,
  Levi
PS:
    int i;
parses to
int i;
, but
[code]    int i;[code[i]]
parses to
    int i;

How do I set the default size of a new folder?

I have finder sized the way I want for existing folders and if I do Finder > New Finder Window. These preferrences, however, do not seem to apply to new folders. Everytime I create a new folder on my desktop, and open that folder for the first time, the window size is really small and the sidebar is narrow. This is incredibally annoying. How do I set the default size for all new folders? Is there a plist file I can edit to fix this? Or an AppleScript I can run automatically in the background that fixes this? I am running Mavericks 10.9.1.

If you use the Finder's New Finder Window command (command N) to create a new window, resize it, place it where you want, and set it for icon view or however you want it. Then close it. Closing it is what sets these as the default. That should become the default for every new Finder window you create using the new window command. But if you have lots of windows open at once and then close them, the last window you close will set a new default.
There are lots of utilities that control Windows - their size and placement. I use one called Moom but there are many more.

How do I set the Launch window size (from launch from an LMS) in Captivate 5.5?

Similar Messages

Maybe you are looking for