How do I set the options to check for newer versions of stored pages so I get a new refreshed version every time I visit a web page?

I can do this in IE easily but can't find any place in Firefox for this setting. Every time Firefox starts and/or I visit previously viewed pages I want Firefox to refresh the page. It used to do this before I downloaded a new version of Firefox within the past couple months. (I wish I had not installed the new version, I really don't like it as well and I lost features I used.)

See:
*http://kb.mozillazine.org/browser.cache.check_doc_frequency
To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
If you see a warning then you can confirm that you want to access that page.<br />
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold(user set).
*Preferences can be reset to the default or changed via the right-click context menu.

Similar Messages

  • How do I set the default print margins for ALL printers in mozilla.cfg

    How do I set the default print margins for ALL printers in mozilla.cfg, even ones that are not yet installed / connected to the computer?
    I'm trying to install firefox with MDT and apply certain print options, but the printers themselves are connected at a later stage so the print.printer_myprinterhere cannot be used.

    Best answer I could find: [https://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/#comment-132668]
    If you can figure out how to add the printer name, this can be used to lock the margins.

  • How do I re-enable option to check for updates in Acrobat 11?

    I had this till the time I was using Acrobat 10.xx until couple weeks back - recently purchased a license for version XI and the deployment was streamed to my computer by my company's IT department through Microsoft Software Centre. After the upgrade I don't see the option to check for upgrades under any menu. I have tried a re-install and a repair as well, but to no avail. How can I re-enable the option to check for updates?
    Thanks
    Satya

    Thanks so much @LeoAdobeX - that indeed was the problem. I changed it to 1 in registry and see the option in the Help menu now. Thanks again.
    Satya

  • How do I/Can I define the interval Mail checks for new email?

    How do I/Can I define the interval Mail checks for new email?
    Thanks
    Glyaflya
    iPad 16G/3G ios 4.2.1

    Settings > Mail, Contacts, Calendars > Fetch New Data

  • How does one set the option to pre-compile JSPs on deployment in WL 10.3?

    Outside of manually creating and modifying weblogic.xml, that is.
    There used to be a tool Weblogic Builder that gave a graphical interface to modify weblogic.xml. Has this been replaced in 10.3 or just thrown away?
    Also, can I set the option at all in an app deployed as a war without exploding the war manually.
    Thanks.
    Edited by: joeb on Jan 29, 2009 5:26 PM

    You might be able to do this with a deployment plan. If doing this requires adding an element, as opposed to simply modifying the value of an element, then it might not help.
    It would be conceivable to add this capability as part of a build process, as you can use the "xmltask" Ant task library, to automatically modify the file. You'd also have to add in tasks that automatically exploded and reconstruct the WAR file. At least you wouldn't have to do this manually.
    I doubt there's any way to change this in an already deployed app, without redeploying the app.

  • How do I set the default size of a new folder?

    I have finder sized the way I want for existing folders and if I do Finder > New Finder Window. These preferrences, however, do not seem to apply to new folders. Everytime I create a new folder on my desktop, and open that folder for the first time, the window size is really small and the sidebar is narrow. This is incredibally annoying. How do I set the default size for all new folders? Is there a plist file I can edit to fix this? Or an AppleScript I can run automatically in the background that fixes this? I am running Mavericks 10.9.1.

    If you use the Finder's New Finder Window command (command N) to create a new window, resize it, place it where you want, and set it for icon view or however you want it. Then close it. Closing it is what sets these as the default. That should become the default for every new Finder window you create using the new window command. But if you have lots of windows open at once and then close them, the last window you close will set a new default.
    There are lots of utilities that control Windows - their size and placement. I use one called Moom but there are many more.

  • How do I set the number of columns for JTextPane

    I only found a method setSize() of JTextPane class. How can I set the number of columns in a JTextPane? Each column can be written one letter.
    Thanks.

    You're not going to use FontMetrics to change the width of the characters; you're going to use it figure out how wide a single character is. Then multiply by the number of characters you want to have in a line, and presto! You know how wide to make your JTextPane.
    Unless I've misunderstood your problem, of course.

  • How do I allow my users to set the option to save a new timezone for future sessions?

    The option to save a newly selected timezone for future sessions has been greyed-out
    in the Calendar Client. How can I allow my users to choose this option?
    <P>
    This is controlled by the settimezone setting on the Calendar Server. By
    default, it is set to FALSE. You can change the value to TRUE in the
    unison.ini settings. The
    Calendar Server must be restarted for the change to take effect.

    Hi,
    Based my research, OOB SharePoint don’t allow anonymous users to contribute contents(Edit, Upload and Add) into list and library.
    This is by design behavior, and it’s a consideration about security in order to help protect your site from potential script injection attacks.
    For anonymous users, only the View Item permission is available for libraries.
    If you want to know more about this, please refer to
    http://office.microsoft.com/en-us/windows-sharepoint-services-help/enable-anonymous-access-HA010113018.aspx
    Hope this helps
    Thanks!
    Stanfford

  • How can I set the tab order of text box controls on each page of a tab control?

    I need to be able to select the tabbing order of individual controls on a single page of a tabbed control. How??

    In LV 6.1 an up you should be ablel to right click on the edge of the tab control when the tab-page in question is selected.
    The bttom selcetion in the pop-up is "Reoder controls in page..."
    selecting this option will switch editing modes to allow you to specify the ored, just like in a cluster.
    I seem to remeber in older versions you had to drag the tabable controls off the tab control, specify the tabbing oder and then drag them back on. The oldest version I have on this machine is 6.1 so that all I can speak for at the moment.
    I hope this helps,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • How do I set the default file path for the Place command?

    I keep my graphics files for each document in a particular folder. Every time I open an existing InDesign document and place a new image I have to browse back to that location - even though all of the previous images in that document came from the same folder. InDesign does not remember the file path that was used previously in the document. This is very annoying.
    IS THERE A WAY TO SET THE DEFAULT FILE PATH, OR LOCATION, FOR IMAGE FILES?
    I have looked through the preferences, searched the forums and internet, but I have not found any reference to setting default paths. Is there a setting like the one in MS Word called "File Locations" on the Options toolbox?
    Thank you.

    Since you're working in ID on Windows, you can take advantage of a neat trick in Windows. Copy the file path out of the File Explorer address bar and paste it directly into the Place filename field. That will jump you directly to the desired volume. For example, let's say I want to place a graphic located at X:\PS Jobs\May PS\709672bp\Working Source Files\Links. I copy that entire path from the File Explorer address bar, go to InDesign, select File|Place, and press Control + V to paste that path into the filename field. I press the Open button and Shazam! I'm there instantly, without a bunch of navigation.
    You can do the same thing in the File|Save As and File|Export fields. Let's say you want export a PDF file from InDesign to the volume X:\PS Jobs\May PS\709672bp\Working PDF Files. First copy the desired file path from the File Explorer window. In InDesign, select File|Export, click anywhere in the filename field, and press the Home key to move the insertion point to the front of the filename. Press Control + V to paste that path in front of the filename, then add the backslash character (\). The filename will now look like this: X:\PS Jobs\May PS\709672bp\Working PDF Files\Filename.pdf. Press the Save button to bring up the Export Adobe PDF window. Select your desired PDF preset, press the Export button, and the PDF file will magically appear in the desired volume.
    This sounds really complicated, but it's not. In practice, it only takes a few seconds. I probably save an hour's worth of needless navigation every day with this technique.

  • How do I set the default Object Placement in new pages?

    I often drag and drop images to pages, but the default is that these images do not move with the text.
    How do I change the default for this setting? This always worked with the old pages 09...
    I've tried a lot of different approaches including creating a new template or applying a new style to the objects. But it seems that the style does not affect the object placement settings at all. And the template didn't work either.
    Has anybody already figured out how to do this?
    Many thanks in advance!
    xifle

    Hello xifle, I have the same issue with pages. Indeed, it is time consuming to have to format the placement of each image I insert so that text wraps around it. Sometimes, I would need the image to float so that I can position it more effectively. Finally, wouldn't it be nice to have screen shots inserted into a pages doc scale down to a pred-determined size. We are surely hundreds of users needing this same feature. Great streamlining, but an overall weak version of Pages at the moment. Regards, Emmanuel in Switzerland

  • How can I set the default save format for photoshop edited photos?

    I just spotted that some of my photos that I've edited in Photoshop from Lightroom are a whopping 450MB. Looking deeper I found that they are saved as uncompressed TIFF files, this despite the default save format for Photoshop in Lightroom's preferences being set to ZIP compressed TIFF files. So why doesn't this setting work and how can I make Photoshop save things compressed?

    Sounds funny but first tell us what version of PS you have, what version of Lr and which OS. Thanks.

  • How do I set the default from email for invititations

    I use my ical calendar for different business and personal calendars.
    Is there any way to set up the "from" email account to coinscide with the calendar the event is made for.
    i.e. If I make a personal event, the invite is sent from my personal e-mail, and if I make a business appointment, the invite is sent from my business account.
    I was able to do this with google calendar, but I am trying to be all in the cloud.
    Any help would be appreciated.
    P.s. running 10.7 and iCal vs.5.0.1
    Thanks

    I understand that you want each of several email accounts to act independently, such that mail for account 1 is sent and received only on that account, then account 2 likewise, etc.
    For each email account, left click on the account name and then select 'View settings for this account'.
    On the 'Account Settings' page, look at the 'Reply-to-Address' (should be blank) and also select the 'Manage Identities' box, which shows the default name and email address. If the default is not for that account, you can add or edit the entries and set the default.
    Back on the 'Account Settings' page, select 'Outgoing Server (SMTP)' and check the user name/account there. It should be for the same account.
    For each account, the other accounts should not be mentioned in any of the places identified above.
    - duggabe

  • How do I set the about:config settings for all users? iprism keeps prompting from authentication for users.

    When users log on and try to open Firefox 23.0.1, users are prompted with Iprism Authentication. We made changes to the firefox about:config values "network.automatic-ntlm-auth.allow.-non-fqdn" and "Network.negotiate-auth.allow-non-fqdn" to true and it works, but only works on a per user basis. How can we set this up for all users?

    I would think the about:config entries discussed are ex-factory set to values each user has to change individually, after the installation has run its course. The solution could be to have patched files ready to install post factum:
    [https://developer.mozilla.org/en-US/docs/Mozilla/Preferences/A_brief_guide_to_Mozilla_preferences A Brief Guide to Mozilla Preferences - MDN]

  • Why is Firefox connecting to the Internet and installing updates when I have checked the option to "Check for updates, but let me choose where to install"?

    Firefox is connecting to the Internet by itself (i.e., I have not opened the browser) and then installing updates (e.g., Firefox 28 today) even though I have checked the option under Advanced to "Check for updates, but let me choose where to install." I am using Windows 7 on an HP EliteBook behind my company's firewall.

    Reset your firefox and try once again!!!
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
    '''Note''': ''This will cause you to lose any Extensions and some Preferences.''
    *Open websites will not be saved in Firefox versions lower than 25.
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

Maybe you are looking for