How do i set the scheduler schedule property to run at 6am & 9pm daily?

How do i set the scheduler's schedule property to run at 6am & 9pm daily?
Do I have to use a PeriodicSchedule ?
Edited by: DivyaR on May 19, 2013 11:10 PM

Use the Calendar schedule. set the schedule property as following in your scheduler
schedule=calendar * * * * 6,21 0
The value of 6,21 specifies that its going to run once at 6AM and other time at 9PM everyday.
Thanks

Similar Messages

How to set the disable,visible property in declarative components.

We have used one declarative component. It consists of 5 buttons (add,delete,save,delete,print). In all of our pages, this declarative component is used. We could bind methods and was able to use each pages seperately (by linking the methods in the backing bean)
But for implementing the DISABLE,VISIBLE properties, we have added the attributes for this and refered this to the corresponding disable and visible property of the button. In the page all these properties where reflected. But at the runtime these buttons are not coming.
Can anyone advise how can we set the disable,visible property in declarative components.

Hi vikram ,
i hvnt initialized the properties ,
in my declarative component i have one button say Save button and i want to config 2 properties Disable and Visible
i added two attributes ( java.lang.Boolean ) say disablr_btn ,*visible_btn* and mapped wth the Save button Properties Disabled and Visible using expressions
Now the button is invisible while running the page.
if i remove the mapping from properties Disable and visible , the button is visible
should i init the properties in faces config , i dnt knw hw to init the properties
pls advice

How to set the read only property for dynamic ALV column

Hi All,
I have built one dynamiv ALV and I have one name column inside that ALV for which I have to set read only property based on two column fields that exist in the same ALV,say IS_SP and IS_CORP of type boolean.
If any one of the flag is 'X',i have to make that name column as display only and
If both flag are not set,it should be displayed as ediatable column.
I have written one method as INIT_ALV which gets called when ALV is loaded.
Code is as follows:
lr_column_settings ?= wd_this->alv_all_roles.
lt_columns = lr_column_settings->get_columns( ).
LOOP AT lt_columns INTO ls_column.
CASE ls_column-id.
   WHEN <NAMECOLUMN>. "name column which should be editable/display
Create Input Field
        CREATE OBJECT lr_uie_input_field_ro
          EXPORTING
            value_fieldname = ls_column-id.
     ls_column-r_column->set_cell_editor( lr_uie_input_field_ro ).
    After this,I have to set the read only property based on IS_SP and IS_CORP values,
          CALL METHOD lr_uie_input_field_ro->set_read_only_fieldname
          EXPORTING
            *value = 'IS_SP' or 'IS_CORP'
ENDLOOP.
I dont want to use cell variants also.
Help me to achieve this.
Thanks and Regards,
Divya

Divya - I have done it in the past following these documents. Please read it and try it it will work.
Please read it in the following order since both are a continuation documents for the same purpose (it also contains how to change colors of row dynamically but I didnt do that part I just did the read_only part as your requirement)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0625002-596c-2b10-46af-91cb31b71393
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0155eb5-b6ce-2b10-3195-d9704982d69b?quicklink=index&overridelayout=true
thanks!
Jason PV

How can I check the all schedule CM jobs' time?

Dear all:
How can I check the all schedule CM jobs' schedule time?
my environment is : EBS 11.5.9 | DB:ORACLE 9.2.0.8 | PLATFORM: LINUX redhat 4.0*
Regards
Terry
Edited by: Terry Chen on 2010/4/14 下午 7:12

Terry,
Please see (Note: 170107.1 - How to Determine Scheduled Concurrent Requests).
Regards,
Hussein

Forms 10g : How to set the Database Item property for an item dynamically ?

Hello all,
I have a requirement where I need to set the database item property of an item to TRUE/FALSE
dynamically at runtime based on certain conditions.
Earlier, in forms 6i I've used,
Set_Item_Property (<item_name>, DATABASE_ITEM, PROPERTY_TRUE);
But in Forms 10g it doesn't recognize this Database_Item property and gives a compilation error.
Have I overlooked something or has this property become obsolete in Forms 10g ?
If obsoleted what is the replacement property ?
Regards,
Sam

Some options:
1. Create a database-view, including the "real" column in databases where it exists and a "dummy"-column in databases where it doesn't exist.
If that's not possible,
2. set database="No" for your item and
-- create a POST-QUERY-trigger which reads the data for that column from the database, if the column exists, and
-- create a ON-UPDATE-trigger which includes an
UPDATE_RECORD;
UPDATE THETABLE SET
THECOLUMN=thevalue
WHERE ROWID=:THEBLOCK.ROWID;3. Base your block on either a select-from-clause, a ref-cursor or a procedure to adjust he query-part,, for saving use a procedure.

8330 Call Forwarding...How do I set the number of rings before calls are forwarded?

8330 Call Forwarding...How do I set the number of rings before calls are forwarded? Right now it instantly forwards my calls but I don't want that. I want to change it so that let's say that if after 5 rings I don't answer the call is forwarded. I've looked everywhere for an answer but have had no luck. Any help would be appreciated. I am with Virgin Mobile if this makes a difference.
Thank you
Message Edited by 8WDDdotcom on 08-01-2009 02:39 PM
Message Edited by 8WDDdotcom on 08-01-2009 02:44 PM

Well, call forwarding is a feature provided by your carrier -- it is not a function of the device. However it works for your carrier is how it works. Actually, from what I understand about call forwarding, it normally is an all-or-nothing circumstance...calls forward to the number you've asked them to be forwarded to, keeping you in a DND status. Regardless, though, if your carrier tells you how it works on their system, there's nothing that the device can do to override that. Unless there is some kind of 3rd party app that would do it, bypassing (somehow) the carrier network CF feature...but I've never heard of such a thing.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How do I set the Time of Day that a sync will occur?

Like a lot of Aussies I have an ISP plan that has Peak/Off-Peak hours. What I want to do is have my iTunes do all it's sync/podcast updates at a certain time (say 4AM) when I'm not doing anything else, it's taken from my Off-Peak monthly usage total and leaving me both free bandwidth and Peak time capacity for the month.
I notice I can set my Podcast updates to check daily, but how does one set the time of the day?

I believe that when it has attempted to download (or actually downloaded) it automatically schedules the next attempt after the time period. To make it execute your downloads at 4AM, get up at 4AM once and force it to check for downloads, it should schedule the next attempt at 4AM the next day, then the following, etc.
I would schedule the first download early in the offpeak hours so that if there is any drift in the time, it wouldn.t run into the peak hours.

How can i set the alternating colors for a table rows

Dear All,
Please any one help me how can i set the Alternating colors for Table Rows.
i created a theam there i set the background alternating color to brown and i set the table design properity to alternating. but it is not reflecting.

Hi,
The design property in Table properties should work for your requirement. Select "alternating" value for design.
Please see the API below:
design
Determines the appearance of the table. The property design can take the following values and is represented by enumeration type WDTableDesign.
alternating - The table rows are displayed alternately in a different color.
standard - The table background has one color. The individual table rows are displayed with grid net lines.
transparent - The table background is transparent. The individual table rows are displayed without grid net lines.
Check whether you have changed the right property or not? Also table should contain more than one rows to test this scenario.
Regards,
Jaya.
Edited by: VJR on Jun 17, 2009 6:43 PM

How do I set the CoreTable sort column in the managed bean?

I have a CoreTable with two columns, first name and company, from the managed bean in a session scope, how do I set the company column to be the default/selected sort order?
Or is that done by binding the af:column to a CoreColumn object in the managed bean, which method would I use?
<af:column sortProperty="company" sortable="true">
<f:facet name="header">
<af:outputText value="#{common.labelCompany}"/>
</f:facet>
<af:outputText value="#{row.company}"/>
</af:column>
Thanks,
--Todd

Yes, I know, "sortable", see, I even used it in my example. I don't want to disable default sorting.
What I'm asking is how to have more than one sortProperty. When the user clicks the column heading, I want to sort by "myFirstProperty" AND "mySecondProperty". The sortProperty only seems to allow one sort property.
One possibility seems to be to programatically add items to the List of SortCriterion objects as in your example, but where would I put this code so that it is executed when the user clicks the column heading, but before the table is sorted.

How do you set the zoom level to Inherit Zoom for all bookmarks in a pdf?

How do you set the zoom level to Inherit Zoom for all bookmarks in a pdf?

beatngu13
I made an account just to "like" your comment and say that you are a god among men.
I've been searching for hours about how to make the zoom level persistent throughout following links in various PDF's I have, and most sources were saying to just buy acrobat pro and edit the bookmarks manually with it.
I saw that it was possible to write an application to change the property, and considered doing it after the only pre-existing custom application I could find was asking for $50.
Thanks to you, I no longer have to worry about re-zooming every time I click a bookmark, and I'm not out $50 or the time it would take to code an app myself!
From the bottom of my heart, thank you!

How can i set the space between two button?

Hello,
I have
<mx:HBox>
<mx:Button label="one" />
<mx:Button label="two" />
</mx:HBox>
how can i set the distance between this two compotents?
Thanks

quote:
Originally posted by:
robinbouc77
Hi,
you can use horizontalGap property on HBox to change the
space between your buttons. I think the default value is 6. You can
also use <mx:Spacer/>, but changing the gap on HBox is
probably the cleanest way ;)
C U
perfect!!! works fine

How do I set the thumbnail image of my videos that export to my computer? I'm using Premiere Elements 11 on a windows 8.1 PC 64bit.

How do I set the thumbnail image of my videos that export to my computer? I'm using Premiere Elements 11 on a windows 8.1 PC 64bit.
Or how does Premiere 11 determine where to set the image for the video it is exporting?
I already know how to use Freeze frame and save the image to my computer by Publish+Share/Computer/ Immage.
Thanks,
Mike

Mike
This is not Adobe. Rather user to user. We are all visitors here.
Just a bit of history....back in the days of Premiere Elements 4, you could set a "poster frame" in what was called the Project area. You did this by right clicking a blank area there and, from the drop down menu that appeared, selecting View/Preview Area, and using the poster frame feature there.
As I said, when a video imports into Premiere Elements, the thumbnail of the import has been presenting as the first frame of the video. With this Preview area "poster frame" option, you could set the video's thumbnail in the Project area so that the first frame was another frame in the video. But, this "perk" was restricted to thumbnails of the video in Project area.
If you exported to file with the first frame modified video, the export's thumbnail in Windows Explorer would present with other than the real first frame or the poster frame as the first frame.
Also, in more recent versions, I have observed that the export to file does not display the real first frame of the video in Windows Explorer. Seems random, but I have not kept track.
And, remember, at the onset I wrote
As far as I have ever seen, Premiere Elements Windows uses the first frame of the video for its thumbnail in the program.
I know of no way within Premiere Elements to control what the program opts to do in this matter. In some compatibility
issues, it opts to give no image but a generic one.
I did not say that you can expect to have the Premiere Elements' export file's thumbnail in Windows displaying with its real first frame. And, the more you get into this, depending on the versions, more details need to be added to my comment about "...first frame of video for its thumbnail in the program..."
I would have to look into all this further to get perspective on the contributing factors.
ATR
Add On...The Poster Frame feature appeared in versions 4, 7, 8, and 9 by my count.

How do you set the time period on IMAP email accounts (razr maxx)

Hi Guys -
Does anyone know how you can set the time period that the stock email will keep the already downloaded messages for IMAP email accounts?
Mine never seems to show more than a couple of days worth at a time. I'd ideally like to be able to see at least 2 weeks worth of messages without needing to download them again!
On other phones I've had there was a setting in the menu, but either I can't find it...or it's not there. I've found the setting for how OFTEN it checks the accounts, but not the setting I am seeking.
Your help is appreciated!
Best Wishes for the Holiday Season.
-Rich

Hey Rich. Once in 'settings,' there should be a "days to sync' under the 'data usage' section. You don't have that?

How i can set the selected item of a dropDown component from java code

Hi
Thank you for reading my post
How i can set the slected item of a DropDown component from backing beans java code ?
it is binded with a database , so one field determine its display and one other field determine its value , I want to set the selected item of this combobox
In back code i have both value and display values to use them .
can some one give me some help ?
Thanks ,

See code sample 3 at http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/helloweb.html
See also, the selection components row in the table under http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/helloweb.html
It says
One way to preselect items is to call setSelectedValue(Object[]) or setSelectedValue(Object) from the prerender() method. You pass in the return values of the items that you want preselected. Be sure to verify that getSelected() returns null before setting the default options, or you will overwrite the user's selections on a post-back.

How can I set the page that will open, when I open a new tab, to be the same as the homepage?

How can I set the page that will open, when I open a new tab, to be the same as the homepage?
An app changed it to some other search engine, before installing the app, I the tab that would open was the homepage I set.
In my case it is Google, and I want my new tabs to open on Google like they did before the installation.
thank you,
Asaf Privman.

You can middle-click or Ctrl left-click the Home button on the Navigation toolbar to open the Home page in a new tab.
You can look at one of these extensions:
* NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/
* New Tab Homepage : https://addons.mozilla.org/firefox/addon/new-tab-homepage/

How do i set the scheduler schedule property to run at 6am & 9pm daily?

Similar Messages

Maybe you are looking for