How do i show busy cursor when i have something loaded in subpanel?

I have a requirement where i used to use make child and get a sub vi to be a child of main vi. Now since this is supported natively by Labview7 i used the subpanel. I have a problem with this approach. If i set the cursor to busy for the main vi, it remains busy for the subvi as well.
How do i set the cursor busy for main panel and not the subvi?
Thanks,
Anand.

Sounds like you need to dynamically track the position of the cursor on the screen and set the cursor depending on its position.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Similar Messages

How to show busy cursor when call webservice using as?

I want to call webservice using script,but i don't know how
to show busy cursor.please help me

Show busy cursor:
>>>
CursorManager.setBusyCursor();
<<<
and hide it:
>>>
CursorManager.removeBusyCursor();
<<<
Don't forget to catch all events of the web-service to
securely remove the busy cursor. Especially, you might wish to
handle events of the 'results received' and the 'faults appeared'
logical results.

How to set a busy cursor when the excel report pops-up(in Excel)?

I'm using LabVIEW 7.1 and Report Generation Toolkit for MS Office to build a VI. at the end of each session when the data in a certain peroid of time was collected, the data will be transmmited to Excel report. the problem is during the poping-up of Excel report, if the cursor clicks inside Excel accidently, all the collected data will disappear and the blanks in Excel will no longer be filled automatically. I have tried to use Set Busy.vi, but it only works in VI panel, not in Excel. Will someone please help me?
thanks very much

Hi jingli,
For changing cursor appearance, you can visit another post on the forum:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=506500000008000000272E0000&ECategory=LabVIEW.LabVIEW+General
(search for mouse pointer appearance in this forum if the URL doesn't work)
Another suggestion would be setting the windows appearance to "minimum" when you open your Excel report (wire it at the New Report VI).
Dan

Create a business model when we have only one source table

Hi,
How to create a business model when we have only one source table in Physical layer
Regards
Swathi

This is very much possible and feasible. Its called as Single Table model. Good example is SA System Subject Area where we just have a single physical source. No need to create Alias in Physical. Simply use the same table twice in BMM with one Logical Table as Dummy Fact..Like say Count of Users (aggregated). Then apply normal Complex join in BMM and present in presentation layer.
http://gerardnico.com/wiki/dat/obiee/single_table_model
http://gerardnico.com/wiki/dat/obiee/sasystem

How do I Restore previous session when I have it setup correctly and it did not restore from last session? I have General is set to Show my windows .....

How do I Restore previous session when I have it setup correctly and it did not restore from last session? I have General is set to Show my windows and tabs from last time and Privacy set to remember history.
These to pages do NOT apply: https://support.mozilla.org/en-US/kb/restore-previous-session
https://support.mozilla.org/en-US/kb/how-do-i-restore-my-tabs-last-time
There is No option to restore previous session when I go into History. There is No Recent history in the History. It will show my history if I click on show History, but it won't restore it!

Hi StuckAtHomeMom
try in PRIVACY panel to set : Firefox will: Use custom settings for history and :
Uncheck: [ ] "Always use private browsing mode"
Uncheck: [ ] "Clear history when Firefox closes"
check everything else and in Accept third-party cookies, set Keep until: they expire
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Is there a way to show busy cursor in indesign during long processing?

Hi
I have created an extension for inDesign. It has long processing. I want to show busy cursor while processing.
Can anybody help me out?
Best regards
Sal

@ stephen - Busy cursor is shown only on the extension and not anywhere in inDesign with "CursorManager.setBusyCursor();"
@ Vamitul - its still showing normal cursor with setting ScriptPreference.enableRedraw to false

How can i reset my ipad when i have lost the code

how can i reset my ipad when i have lost the 4 didgit/number pass code

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

How can i send a picture when i have my imessage off?

how can i send a picture when i have my imessage off?

If you have MMS enabled on your carrier account and enabled on your phone you can send photos without iMessage.

How do I disable immediate delete when I pit something in the trash ?

How do I disable immediate delete when I put something in the trash ?

http://forums.macrumors.com/showthread.php?t=835768

Show-stopping error when I try to load/run the muse code with JQuery version 1.9.1.

Version 1.9.1, and the muse code uses 1.8.3. As you can see HERE,http://jquery.com/download/ version 1.9.0 was a major milestone release for JQuery that eliminated much of the (deprecated) functionality of earlier versions. Unfortunately, the muse html uses some of that deprecated functionality (specifically, the "browser( )" function HERE)http://jquery.com/upgrade-guide/1.9/#jquery-browser-removed. Thus I am getting a show-stopping error when I try to load/run the muse code with version 1.9.1. Other people have had this same problem (see THIS)http://bugs.jquery.com/ticket/13214.
Do you see an update in the near future?

Version 1.9.1, and the muse code uses 1.8.3. As you can see HERE,http://jquery.com/download/ version 1.9.0 was a major milestone release for JQuery that eliminated much of the (deprecated) functionality of earlier versions. Unfortunately, the muse html uses some of that deprecated functionality (specifically, the "browser( )" function HERE)http://jquery.com/upgrade-guide/1.9/#jquery-browser-removed. Thus I am getting a show-stopping error when I try to load/run the muse code with version 1.9.1. Other people have had this same problem (see THIS)http://bugs.jquery.com/ticket/13214.
Do you see an update in the near future?

HT4623 I am unable to switch on my IPad as it states that 'iPad is disabled'. How do i fix this problem when I have no access to the iPad? Any help or advice will be gratefully received.

I am unable to switch on my IPad as it states that 'iPad is disabled'. How do I fix this problem when I have no access to the iPad? Any help or advice will be gratefully received.

Forgotten Passcode or device disabled after entering wrong passcode

TS1363 how to unlock my ipod nano when i have forget code

how to unlock my ipod nano when i have forgot code

If you do not know the combination, you can try and connect it to the iTunes library you normally sync it. Upon properly ejecting it from iTunes and your PC, you may find that it is now unlocked. If it is, disable the screen lock or change the combination immediately.
Otherwise, your only other option is to connect it to iTunes and restore it to factory settings.
B-rock

The webpage declined to show this webpage when WebPart Page is loaded

I have a webpart page when I try to open that page I'm getting. The webpage declined to show this webpage.It loaded when the part was added to the page first time.But when I redeployed the WSP I'm getting this error.
Please help me in this.
Thanks & Regards,
Mathi.
With Regards, Mathi.

Hi,
According to your post, my understanding is that the webpage declined to show this webpage when WebPart Page was loaded.
The problem was within the web part page. A web part was causing the page to 403. Some configuration to the web part had made the web part no longer permissible to show to the user. Instead of just not showing the web part, SharePoint declines to show the
web part page.
To resolve the problem, go to the Web Part Page Maintenance page for the page that is giving the 403 error:
http://ServerName/SiteName/_layouts/spcontnt.aspx?&url=%2fSiteName%2fPages%2fPageName.aspx
One by one disable the web parts. One of them is the problem. When it is disabled, the page will display properly to the user.
You’d better to delete the web part and re-add it.
There is an article for your reference, although it is about the SharePoint 2007, it still works for SharePoint 2010.
http://dlairman.wordpress.com/2010/10/12/error-the-website-declined-to-show-this-webpage-http-403/
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to reset your secret question, when you have forgot the answer. And how to change the email where the reset confirmation will be send towards?

can anybody help with the question below?
how to reset your secret question, when you have forgot the answer. And how to change the email where the reset confirmation will be send towards?

You won't be able to change your rescue email address until you can answer your questions, if you don't have access to your current rescue account then you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use steps 1 to 7 half-way down this page to update your rescue email address for potential future use : http://support.apple.com/kb/HT5312

How I could change my location when I have 0.01 money in my account

How I could change my location when I have 0.01 money in my account

Contact iTune Support
https://ssl.apple.com/emea/support/itunes/contact.html

How do i show busy cursor when i have something loaded in subpanel?

Similar Messages

Maybe you are looking for