HOW do I subtotal a filtered column?

I can't seem to subtotal any columns if they have been filtered.  If you use the SUM function, it still calculates all of the chart's rows.  How do I only add up the filtered set?
Thank you!
-Chris

P.S. I'm using FormsCentral... and it doesn't offer SUBTOTAL as an option... its there another way to add up the filtered results of a column?  Thanks -Chris

Similar Messages

  • How to display subtotals in separate column in alv report?

    hi,
    I am displayed the subtotals  for QUantity field BDMNG in Reuse_alv_grid_display  in the same column.
    but I want to display subtotal in separate column.
    How to display subtotals in separate column in alv report?
    thanks&regards.
    samba.k

    Hi
    As far as i know you can't do this,the option you have is to create one more column (subtotal) and populate it by manual calculation at every subtotal (not alv subtotal but yours) .
    Best Regards
    Yossi

  • OBIEE - How to selectively hide or disable columns on a dashboard prompt?

    Hello! I need some help with OBIEE dashboard Prompts. Any help will be highly appreciated!
    Question 1. How to selectively hide or disable columns on a dashboard prompt or the entire prompt? There seems to be no "hide" or "dsable" options on
    prompts.
    Question 2. How to synchronize 2 different prompts on the same dashboard?
    The application is this: There are total of 2 tabs on a dashboard ("tab_1" and "tab_2"). Each tab uses different prompts ("pr_1" and "pr_2"), having just one first drop down column in common ("Product_id").
    The desired functionality is this: user selects "Product_id" on the first tab's prompt, which filters its reports (on "Go") and also propagates to the second tab. When user clicks on the second tab, the reports there are already filtered (or begin filtering) by "product_id", selected on the first tab.
    Question 3. How to prevent the reports from retrieving when switching to a different tab on a dshboard? Specifying dummy default values in the prompt does
    not seem to preven reports from retrieving, which still takes time.
    Thank you very much!
    Roger

    Regarding Question 2:
    What you need to have is a Dashboard scope dashboard prompt for Product_ID (i.e., Don't use the column prompt from the prompt tab within the Request.)
    1) Create the dashboard prompt, put it on tab1 and save the prompt to a presentation variable, say prmtProdID. Set the scope to "dashboard." (This is the default, by the way.) If you create a dashboard prompt and set the scope to "dashboard," then the prompt values selected will hold true across dashboard pages.
    2) On tab2, go to your report and in Criteria mode, apply a filter to the Product_ID column making it equal to the PV. (Click the filter icon, Add>Variable>Presentation Variable and type prmtProdID. Save.)
    When the user selects a Product_ID on tab1 of your dashboard and hits "Go," not only will it filter your report on tab1, when you go to tab2 the report here will be filtered with the same value selected in the prompt on tab2.
    Regarding Question 3:
    If you implement 2, you cannot implement 3. You can't have it both ways. Not for the same scenario. But if you want to know how to do it in general, read this:
    http://obieeone.com/2009/08/24/how-to-stop-queries-to-automatically-fire-off-once-entering-dashboarddashboard-page/

  • Subtotal of the columns in the ALV

    Hi,
    I want to do the Subtotal of the columns in the ALV by using any of the FMs:
    ALV_OPTIONS_FOR_SUBTOTALS
    ALV_SUBTOTALS_GET
    ALV_SUBTOTALS_GET_H
    But since the functional documentation is not available.
    I am not getting how to use.
    Please provide me the code or reply me about how to go about.
    Thanks & Regards,
    Pooja

    Hi,
    Consider i have 3 fields
    lifnr     curr      DMBTR
    5600   GBP    1000
    5600    GBP   1000
    5600   USD    1000
    5600   TND    1000
    5601   GBP    1000
    5602   GBP    1000
    I want output to be :
    lifnr     curr      DMBTR
    5600   GBP    1000
    5600    GBP   1000
    5600   USD    1000
    5600   TND    1000
    5600  GBP    2000
              USD    1000
              TND     1000
    5601   GBP    1000
    5601   GBP    1000
    5602   GBP    1000
    5602   GBP    1000
    Actually i tried using the using subtotal option here:
    **Method 1:
    lv_fieldname      = lc_lifnr.
      lw_sort-spos      = 1.
      lw_sort-fieldname = lv_fieldname.
      lw_sort-up        = c_mark.
      lw_sort-subtot = 'X'.
      APPEND lw_sort TO i_sort.
    Next i tried using the modifying field catalog like this
    **Method 2:
    LOOP AT i_fieldcat INTO wa_fieldcat.
        IF wa_fieldcat-fieldname EQ 'DMBTR'.
          wa_fieldcat-do_sum = 'X'.
        ENDIF.
        IF wa_fieldcat-fieldname EQ 'WRBTR'.
          wa_fieldcat-do_sum = 'X'.
        ENDIF.
        MODIFY i_fieldcat FROM wa_fieldcat
                            TRANSPORTING do_sum .
      ENDLOOP.
    But both the methods didnt work .
    So kindly tel me how to go about?
    Regards,
    Pooja

  • How do I subtotal in numbers

    HOW DO I SUBTOTAL IN NUMBERS?

    A common way in Numbers to extract subtotals involves the use of SUMIF and SUMIFS.  Here is an example:
    The first two arguments in the function are a column-criteria pair and the third refers to the column from which you are extracting the subtotals.  This tells Numbers to add up the values in the cells in column B of 'Table 1' where the value in column C matches the value in column A of the 'Summary by Cat' table.
    SG

  • In Pages 5.2.2: How do you go from 1 column to 2 and keep them on the same page?

    In Pages 5.2.2: How do you go from 1 column to 2 and keep them on the same page?

    Sorry, I tried to say your answer solved my question, but I guess I told it that my response to you solved it. Now that I liked it, the solved option doesn't appear.

  • How to find the number of columns in an internal table DYNAMICALLY ?

    Hi,
    How to find the number of columns in an internal table DYNAMICALLY ?
    Thanks and Regards,
    saleem.

    Hi,
    you can find the number of columns and their order using
    the <b>'REUSE_ALV_FIELDCATALOG_MERGE'</b>
    call function 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
       I_PROGRAM_NAME               = sy-repid
       I_INTERNAL_TABNAME           = 'ITAB'
       I_INCLNAME                   = sy-repid
      changing
        ct_fieldcat                  = IT_FIELDCAT
    EXCEPTIONS
       INCONSISTENT_INTERFACE       = 1
       PROGRAM_ERROR                = 2
       OTHERS                       = 3
    if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif
    now describe your fieldcat . and find no of columns.
    and their order also..
    regards
    vijay

  • How to add description of a column of a table in SQL Azure

    Hi
    I have some tables in my application database where there are descriptions added against certain columns. Needless to say they were done by using sp_addextendedproperty.
    Now I am trying to migrate the Database to SQL Azure. SQL Azure does not support sp_addextendedproperty.
    Hence I am not able to figure out how to add descriptions to those columns.
    Any help would be much appreciated.
    Thanks
    Soumyadeb

    Hello,
    Just as Latheesh post above, Windows Azure SQL database are not support extended stored procedures. That’s one of the limitations on SQL database, and I don’t know there is another way to achieve the same on Azure.
    Regards,
    Fanny Liu
    Fanny Liu
    TechNet Community Support

  • How can I display all the columns on the screen without scrolling from side to side?

    My clinic software has many columns. How can I display all the columns without having to scroll from left to right all the time?

    If the software you are using doesn't offer the ability to increase or decrease document size, as many do, then the only way is to increase your screen resolution. If that's not possible, maybe you can decrease your font size?  If you can't do any of these, I think you're out of luck!

  • How to find out the selected column in Table Control

    Hi all,
          How to find out the selected column in Table Control?
    Thanks & Regards,
    YJR

    Hi,
    Let your table control name in Screen painter be TC1.
    READ TABLE TC1-COLS INTO WA_COLS (some wok area)
                 WITH KEY SELECTED = 'X'.
            IF SY-SUBRC = 0.
              CLEAR: W_DUMMY, W_COL_NAME.
              SPLIT WA_COLS-SCREEN-NAME AT '-' INTO W_DUMMY
                                                   W_COL_NAME.
            endif.
    W_COL_NAME gives you the column name.
    Hope it helps.
    cheers
    sharmistha

  • How can I remove the Location column from the search results in a .chm file?

    How can I remove the Location column from the search results in a .chm file?
    I generated the file in Robohelp HTML 9.
    As far as I know it's used when you've combined more than one source into the final help file. It is possible (though I don't remember doing it) that I did that once a couple of years ago but now I'm only using one source - the project that's generating the .chm.
    Can anyone tell me how I can remove it?
    Thanks
    Tom

    In Project Setup look at the Window properties. I think you will find Advanced Search is ticked.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • How do I remove right 'reminders' column in iCal 5.0

    How do I remove rightside 'reminders' column in iCal 5.0

    Roger Wilmut1 wrote:
    Command-option-t does in Snow Leopard - does it in Lion?
    Cmd-Opt-T works on 10.7.1 here. From the View menu select Hide Reminders.
    John M

  • How can I add a new column in compress partition table.

    I have a compress partition table when I add a new column in that table it give me an error "ORA-22856: CANNOT ADD COLUMNS TO OBJECT TABLES". I had cretaed a table in this clause. How can I add a new column in compress partition table.
    CREATE TABLE Employee
    Empno Number,
    Tr_Date Date
    COMPRESS PARTITION BY RANGE (Tr_Date)
    PARTITION FIRST Values LESS THAN (To_Date('01-JUL-2006','DD-MON-YYYY')),
    PARTITION JUNK Values LESS THAN (MAXVALUE));
    Note :
    When I create table with this clause it will allow me to add a column.
    CREATE TABLE Employee
    Empno Number,
    Tr_Date Date
    PARTITION BY RANGE (Tr_Date)
    PARTITION FIRST Values LESS THAN (To_Date('01-JUL-2006','DD-MON-YYYY')),
    PARTITION JUNK Values LESS THAN (MAXVALUE));
    But for this I have to drop and recreate the table and I dont want this becaue my table is in online state i cannot take a risk. Please give me best solution.

    Hi Fahed,
    I guess, you are using Oracle 9i Database Release 9.2.0.2 and the Table which you need to alter is in OLTP environment where data is usually inserted using regular inserts. As a result, these tables generally do not get much benefit from using table compression. Table compression works best on read-only tables that are loaded once but read many times. Tables used in data warehousing applications, for example, are great candidates for table compression.
    Reference : http://www.oracle.com/technology/oramag/oracle/04-mar/o24tech_data.html
    Topic : When to Use Table Compression
    Bug
    Reference : http://dba.ipbhost.com/lofiversion/index.php/t147.html
    BUG:<2421054>
    Affects: RDBMS (9-A0)
    NB: FIXED
    Abstract: ENH: Allow ALTER TABLE to ADD/DROP columns for tables using COMPRESS feature
    Details:
    This is an enhancement to allow "ALTER TABLE" to ADD/DROP
    columns for tables using the COMPRESS feature.
    In 9i errors are reported for ADD/DROP but the text may
    be misleading:
    eg:
    ADD column fails with "ORA-22856: cannot add columns to object tables"
    DROP column fails with "ORA-12996: cannot drop system-generated virtual column"
    Note that a table which was previously marked as compress which has
    now been altered to NOCOMPRESS also signals such errors as the
    underlying table could still contain COMPRESS format datablocks.
    As of 10i ADD/SET UNUSED is allowed provided the ADD has no default value.
    Best Regards,
    Muhammad Waseem Haroon
    [email protected]

  • How can I add a new column to Grid view under Tests tab

    I understand in "ORACLE Test manager for web Applications", the Grid view under Tests tab should be customised.
    How can I add a new column to Grid view under Tests tab? Thanks Katherine

    I don't think this is possible.
    Regards,
    Jamie

  • How can I add a new column to an Attachments Table

    How can I add a new column to an Attachments Table??
    And I want to remove the usage column also!
    Thanks!

    I tried to remove the usage column doing this:
    OAAttachmentTableBean attachTable = (OAAttachmentTableBean)webBean.findChildRecursive("attachTable");
    if (attachTable != null)
    attachTable.findChildRecursive("UsageTypeColumn").setRendered(false);
    but I'm getting null pointer exception on "UsageTypeColumn"...
    :(

Maybe you are looking for