How do I use ipod touch 5th gen w/my chrysler 300C rer radio/nav system

I have a 2010 chrysler 300C with a (rer) radio/navigation system.  I tried to use my apple ipod touch generation 5 via bluetooth and an Apple USB cable and it will charge with the cable, but no music from Ipod. aux button stays dim with both attempts.  Another site said a seperate device may be needed, but before I spend $90 plus install, I thought I'd check here first.

Problem solved.  After removing all the junk from my glovebox looking for port for my ipod to plug into, i found a cable(bought the car used).  the port is a 30 pin connector at the top of glovebox, next to the latch.  My ipod is a 5th gen touch with a lightning plug.  Must use a Apple converter, a generic wont completely seat.  Now I have to buy another converter for my docking station, but dont mind since ipod now works.

Similar Messages

  • Buying used iPod Touch 5th Gen?

    Hello Apple Forum Users,
    I've seen A LOT of people purchasing a used iPod Touch 5th Gen and got screwed over because of some security protection and there's no way around it. I've been wanting to upgrade from the 4th Gen, but have been worry about.
    What's the deal?

    The deal is called Find My iPhone, it is a lock that permits ONLY the owner of a device to unlock or reset it. If a device gets stolen, this enables the owner to lock or track it.
    If a device is legitimately sold, the original owner MUST deactivate Find My iPhone before passing it to the new buyer. You, as the buyer, must ensure that this has been done. Do not buy a device where you have no hope of a refund if you find the lock has not been reset - i.e., don't buy from a stranger off the street, from Craigslist, or any other method where you cannot physically check the device before you buy it, or if you cannot get a refund.
    Matt

  • How can I unlock ipod touch 5th gen currently disabled and never sync'd with itunes

    Basic situation. Ipod touch 5th gen. Passcode forgotten and tried too many times such that ipod is disabled and requested to connect to iTunes.  Problem is that the ipod was never sync'd with iTunes so the connection fails.  I've only owned it for 9 months or so.  I know I can recover all my music through iTunes and my applications through the app store since all of my content was legally purchased.  The problem is that I need to also recover my contacts and pictures since this is the only place they exist.
    I have read about methods up to 4th generation where you can access a particular file on the device via computer and rename it to unlock the device. That would most likely allow me to then sync/backup via iTunes and recover my data.  Problem is that I can only access the DCIM folder via windows manager and it contains no data. Perhaps there is a way to access the device a different way?
    Is there a way with the 5th generation to either reset the lock (from disabled to locked with a 1 min wait for retry as an example) to allow me more opportunities to try other passcodes that I may have set (including mistypes etc) or to remove the passcode completely and let me set it to something I will write down this time?
    Please do not reply with the standard apple responses of 'sync with itunes' or 'factory reset' and no, I did not sync with the icloud either (I tried but it was unsuccessful for some reason).
    The answer doesn't even have to be a free one as I would be willing to pay for the solution if it were guaranteed to work.  Since apple seems to want to charge for any type of support, even to ask a question, I am relying on the community for help.  Thanks much.

    You have to place the iPod in Recovery mode as Apple says and erase the device. It is a security feature.
    or
    If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
    There is not other way

  • How much will the iPod touch 5th gen 8gb be?

    I was wondering how much the 8gb iPod touch 5th generation would set me back? Anyone know?
    Thanks

    Look it up yourself.
    Click Store at the top of this page and look for yourself

  • How do you unlock iPod touch 5th gen if you forgot the code

    How do we unlock and iPod torch 5th gen if we forgot the code?

    Connect the iOS device to your computer and restore via iTunes. Place the iPod in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Backing up, updating, and restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the iPod backup that iTunes makes.
    You can redownload iTuns purchases by:

  • How to connect my iPod touch 5th gen to my tv?

    What do I need to watch my iPod 5th gen through my home theater?

    Lightning TV out
    - Via Airplay to an Apple TV.
    or one of these cables.
    - http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter?fnode=3 a
    - http://store.apple.com/us/product/MD825ZM/A/lightning-to-vga-adapter?fnode=3a

  • I bought a used ipod touch 5th gen and it's still connected to the old users apple id. what do I do?

    So, I bought a used ipod yesterday and, while trying to set it up, it asked me for the old user's apple id and password. i don't have that1 What do i do?!

    Hi ZoeKeller,
    If the iPod Touch is running iOS7, it sounds like Activation Lock may be active. You may find the following article helpful:
    Find My iPhone Activation Lock: Removing a device from a previous owner’s account
    http://support.apple.com/kb/TS4515
    Regards,
    - Brenden

  • I am using iPod Touch 5th gen and my location services doesn't work.

    When I'm in other places with wi-fi, the location services work perfectly; when I'm home, it doesn't work. What should I do?
    Some forum says I need to register my point of connection using my ISP. Please tell me how to do it.

    For location the iPod uses the location of nearby wifi routers that are in Apple's database. You do not have to be connected to the network/router to use that router's location. Thus, it appears that the iPod can't see a nearby router that is in Apple's database. Apple continuously updated their database based on info they obtain from iPhones. No one has been able to find a way to inform Apple of a router or correct is location.
    Get somebody to come over with an iPhone and use your wifi network

  • How much will the ipod touch 5th Gen. cost?

    Just want to know how much I would have to save. I don't want to end up going to Wal Mart and being a penny short, or whatever..

    $299 for 32 GB
    $399 for 64 GB
    http://store.apple.com/us/browse/home/shop_ipod/family/ipod_touch/select

  • How do I transfer my current iTunes Library for a 5th gen. Nano to a used iPod touch 2nd gen.?

    I was given a used iPod touch 2nd. gen because my old faithful 5th generation nano was tragically washed. But I'm scared to just plug the new one into my computer to see what happens. I want to make sure I don't lose all of the music I have on my nano. Anyone know how to do this?

    Not sure what you are atlaking about.
    Lose what mui from what ipod.
    Your music should be on your computer.  Sync it to your ipod.

  • My Ipod touch 5th gen is connected to wifi but internet doesnt work on it. It is showing full connectivity but when i try using itunes or safari, nothing loads.

    My Ipod touch 5th gen is connected to wifi but internet doesnt work on it. It is showing full connectivity but when i try using itunes or safari, nothing loads.

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Is there a (relatively simple) way to skip tracks with an iPod touch 5th gen using a physical button? I'm aware songs can be skipped on-screen without unlocking the iPod, but I'm looking for a method that doesn't require taking my eyes off the road.

    Is there a (relatively simple) way to skip tracks with an iPod touch 5th gen using a physical button? I'm aware songs can be skipped on-screen without unlocking the iPod, but I'm looking for a method that doesn't require taking my eyes off the road while driving. For that reason, I'm also not interested in adding in headphones or additional devices that have the desired button functions. Going both forward and back would be great but I would be pleased just to have a "sight-free" way to go forward.
    I've seen some mention here and there about ways to maybe change it so the volume buttons change tracks and holding the volume buttons changes the volume... but I don't know what's involved in that or if its even possible/recommended for a new 5th gen iPod. I think its a great device but its sadly lacking in music oriented functions and features... which is disappointing since music is why most people would bother getting one instead of some other "iDevice" :/

    Given that you cannot do what you have asked for, perhaps you simply need to find another solution to your root problem.
    Presumably, you want to skip to the next track because you don't want to hear the current one, and that is because...
    You don't like it.
    You've heard it recently and don't want to hear it now.
    Simply don't want to hear it at this time.
    For problem number 1. Don't put it on the iPod in the first place. (I know, obvious answer!)
    For problem number 2. How about playing from a Smart Playlist (initially created in your iTunes Library) which has only songs you've not played recently?
    For problem number 3. Hhhmmm! Create alternative Playlists for use in the car.
    As for going back to the start of the "now playing" track.... Well, if your Playlist has only songs that you really, really want to hear, then you'll be looking forward to that rather go back to the beginning of the current song.
    I'm not trying to be prescriptive, just giving you food for thought.
    (They are all cheaper options than buying a car which can control the iPod from the steering wheel.)

  • How to delete all inbox emails at once: iPod Touch 5th Gen ?

    IOS 7, iPOD Touch 5th Gen
    While I can delete multiple emails at once on my iPad 2 (inbox> Edit> Check  first email> Hold MOVE while unchecking first email> Release Move > (all emails stack up) then, >Trash
    this does NOT work on the iPod Touch 5th Gen.
    When I do those steps, it "appears" to work but then, the emails go right back to the inbox.
    I've also tried the other method that incorporates using "Mark all as read" - as an extra step - (read it on Apple Support Forums) but apparently it works on iPhones, not iPod Touch 5.
    Thanks.

    - If you are up to it see:
    How to reset forgotten Restrictions...: Apple Support Communities
    How to reset forgotten Restrictions...: Apple Support Communities
    Otherwise you will have to set up the iPod as a new one.

  • My iPod touch 5th gen won't turn on after updating to iOS 8 using the computer,help!?

    On my computer (using windows) I tried to update my iPod touch 5th gen to iOS 8 using iTunes, using this website http://www.gottabemobile.com/2014/09/17/the-secret-to-skipping-long-ios-8-downlo ads-and-problems/ as a guide.
    It kept coming up with this error http://support.apple.com/en-us/HT201442 after the update.
    Now my iPod won't turn on and it shows the charger with the lightening with an arrow above it pointing to the iTunes logo.
    So i plugged it into iTunes but i don't know what i'm supposed to do, any help?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • HT200006 iPod touch 5th gen will only sync to iTunes using an old lightning cable that it's falling apart, will charge with another cable but it won't sync to iTunes already try reset and restore same results..

    iPod touch 5th gen will only sync to iTunes using an old lightning cable that it's falling apart, will charge with another cable but it won't sync to iTunes already try reset and restore same results..I also update everything using a Mac mini and latest iTunes version and 8.1.3 iOS on iPod touch any help will be really appreciated also try different computer like a macbook pro no luck.

    See if yo missed anything here:
    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     
    and
    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod      
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

Maybe you are looking for

  • Lion 10.7.3: blank screen with MiniDisplayPort to VGA adapter

    Updated my Mac Mini to Lion 10.7.3 recently.. now my MiniDisplayPort to VGA adapter signal is gone: screen is black all of the time, immediately after turning on the Mac Mini. I still have video output via HDMI, however I need the VGA adapter at work

  • Custom OA Page - Basic Question

    Hello All, I tried doing the HelloWorldPG page and it runs ok from JDeveloper ( I am facing deployment issues...but my questions are in another thread..) Any how, I am trying to create another custom page which is relavent to our dev instance. I crea

  • ABAP ALV with Filter On by default ?

    Hello All, Is it possible to make the Filter in ALV active by default, i mean without clicking the link itself. It's possible in JAVA WebDynpro i have already implemented that but wondering how to do the same in ABAP. In java we do it like this wdThi

  • LOGIC CRASHES ALL THE TIME

    HELP!!! Is it possible I over loaded with plug-ins? I layered one track with four of the same baseline? If this is the case why did it work before I rebooted and why are other sessions suddenly also crashing... HELP!!!! I googled and googled and I am

  • Capturing information that one new employee has joined in the system

    Hi How do I capture the information that one new employee has been joined in the system. Apart form per_all_people_f is there any table or some event that occures after joining the employee.