How do we find from PO to return document

Hi,
I have Po list with me I want to find out Return document list. Can you help me out.
Thanks in Advance
Rahul

Hi,
Simply run ME80FN and click on change view and select the "Purchase order History".
Now just filter the movement type field with movements-161/162/122/123.
Thanks & Regards,
Bijay Pradhan

Similar Messages

How do I find from which terminal transport request imported to PRD

Hi Experts,
Let me know how can I find from which terminal transport request imported to PRD
Thank you in advance.
Regards,
Raj

Hi Raj,
Please find the answer for your question in below discussion.
How to find out workstation of a transport request created
I hope it will help you
BR
AKJ

How do I find the URL for a document loaded into Buzzword?

How do I find the URL for a document loaded into Buzzword?

What kind of document? What is Buzzword?

I had my pictures in XP in "My Documents", how do I find my pictures in My Documents in Windows 7 ?

I had my pictures in XP in "My Documents", how do I find my pictures in My Documents in Windows 7 ?

There is a change of folder structure in Windows 7 in comparison with Windows XP
For advanced search I recommend article
http://windows.microsoft.com/en-US/windows7/advanced-tips-for-searching-in-windows
HTH
Milos
PS: Perhaps the more appropriate forum fothis kind of problem is here
answers.microsoft.com

How to duplex print from a MS Word document in HP 1020 Plus printer

Two days before I have acquired a HP 1020 Plus Laserjet printer . How to duplex print from a MS Word document and Corel Draw document in HP 1020 Plus printer? I tried manual duplex printing by printing the odd pages first and then even pages ....it came out correct ,...but whenit comes to Page numbers continuity it is not properly printed ....why?? Can anyone highlight on this and give me a step by step instructuion to print Duplex and thereby help me to create 20-----------page or 30 page booklets.....from MS word typed document or corel draw document......Expecting a speedy solution
thanks & regards,
K Narayanan
This question was solved.
View Solution.

@immo22269
The laserjet 1020 only has manual duplexing capabilities. Please refer to this document for a complete set of instructions.
Print on both sides of the paper (manual duplexing)
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

How can I find out in the billing document, who creat the billing.

how can I find out in the billing document, who creat the billing.
thanks.

On VF03 -Enter billing document number>>press on enter button>>you will get overview of billing document item>> select menubar>>Goto>>header>>header parthner>>you will get full screen with Name "Created By".
Thanks&Rgds,
Rajesh

How to prevent Finder from asking permission to use Trash?

All: How can I prevent Finder from asking permission to use Trash? This wasn't a problem until two weeks ago. Now it is.
Thanks

Do not empty the Trash in the shell. That's both dangerous and unnecessary.
1. Triple-click the line below to select it:
~/.Trash
2. Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open.
3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
4. In the General section, uncheck the box marked Locked if it's checked.
5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
6. Close the Info window and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

How to extract data from table in PDF document

Can somebody let me know that how to read tables from a PDF document as I need to process this data further and I want it to be saved as a database.

Google around; you might find a couple of sourceforge project.
Rich.

How can I find tables in a PDF document?

When I fun a full accessibility check, it tells me that I have problems with some tables in the document. The current error that concerns me is this:
"(g) 6 Table element(s) with no TH child elements."
The document originally contained a number of tables. I examined them all for possible offenses, but couldn't find anything wrong.
So I deleted the pages containing the tables, and I still get the error.
There are no other tables in the document, at least that I'm able to see. And if I scan sub-ranges (e.g., 1-17, 18-33), the scan comes back clean for tables. So I'm forced to conclude that the tables aren't actually part of any page.
Hence the question: how can I find the offending tables and remove them?

Tags are independent of PDF page content. Removing/deleting a page or page(s) does not remove anything in the PDF's structure tree.
As Full Check is looking at the structure tree the report reflects what is present there.
In the Tags panel walk the structure tree to locate the Table tags. Delete these.
Be well...

How do I find templates for a return address labels?

Two day and hours of searching I'm stumpt. Any that I find online like from Avery products won't work. I can find all kinds of things.
But, where can I find return address templates? Can't find anything in Appleworks either. Trying to make Christmas return address lables with address & images.
Anyone????

Hi Mike,
Your labels will be equivalent in size to AVERY 5267, which is in the list of Avery numbers in the database's label size set.
The biggest difficulty using these labels is that with 20 rows of labels, any error in the vertical size of the label layout will be magnified by 19 when it comes to positioning the last row.
As you want all labels the same, DON'T use the Labels Assistant.
=====Start by creating a new DB document and creating 80 records=====
Create a new single field DB document.
Create 80 records in the DB
(These don't need to contain any data. The fastest way to create them is:
Open a new Spreadsheet document.
Select cells A1..A79. Type a character, then press command-D to fill the character into all of the cells.
Copy (command-C)
Go to the window menu and choose the DB document.
Click to the left of the single field label to select the whole record. Make sure the record is highlighted; you should NOT see the insertion point in the field.
Paste (command-V)
79 new records should be added to your DB, for a total of 80.
======Define a Layout for your labels============
Go Layout > Layout
Go Layout > New Layout...
Click Labels
Use the popup list to set the size to Avery 5267
(The Layout name will change from "Layout 2" to "Avery 5267".)
Click OK to move to the next dialogue.
Doubleclick the single field name in the Field list to move it to the Field Order list, then click OK
You'll see the layout window with two grey lines on it, one vertical and one horizontal.
The short vertical line is the right boundary of one label. Its position is set when you define the label size, and can't be moved.
The long horizontal line (labeled "Body") is the bottom boundary of one label. Its position is also set when you define the label size, BUT its position is NOT fixed. The position of this line controls how much vertical space is taken by each label—move the line down a sixteenth of an inch and eight 4-label sets of printed data will take nine rows of labels on a sheet of half inch labels.
The line can be moved inadvertently by dragging it up or down, or by inserting more fields into the label than there is space for. Be very careful NOT to move this line. If it is moved, it's easier (ie. far less hassel) to start over that to nudge it back into the exact position needed.
In the layout, click on the Field to select it, then press delete to remove it from the layout.
======Align the layout with the label stock========
It's easier to do this before putting the information onto the labels.
Go AppleWorks > Preferences > General... Graphics
Click the Object Selection button with eight handles (the lower one), then click OK.
Click to select the Oval tool in the Tools, then use the Color Palette to choose black as the Fill colour.
In the large space below the Body line, make a circle whose diameter is the distance between two dots on the grid. (If Autogrid is turned on, the circle will jump to this size when you drag the mouse.)
Press command-D to duplicate the circle.
Use the Arrow keys to position the center of one circle at the top left corner of the label.
Click on the other circle, then use the arrow keys to position its center at the lower left corner of the label. You may have to turn Autogrid off (command-Y) to do the final bit of horizontal nudging for this one).
NOTEs:
Only the bottom right quarter of the first circle will be visible. The top and left edges of the window should pass through the centers of the handles at the right side and bottom of the circle.
The Body line should pass through the center of the middle handles on both sides of the circle. The vertical boundary should pass through the center handle at the top of the circle.
When the two circles are in place, go Layout > Browse to return to Browse mode, then go Window > Page view.
You should see a set of quarter circles running down the left edge of the window, three columns of paired quarter circles, and a column of quarter circles at the right edge of the page.
Print a test sheet on plain paper, place a label sheet on top of that page, and hold the combination up to a light. You should be able to place the 'point' of each quarter circle at the top left corner of one of the labels on the sheet, but you may find that the edges of the paper and the label sheet do not line up when you do so.
If that's the case, examine the size of the mismatch between paper and label sheet, and adjust as follows:
To shift all the labels on the page you'll need to adjust the top and laft margins of the Document.
Go Format > Document...
Increase the top margin to push the labels further down the page.
Increase the Left margin to push the labels further to the right.
Bottom and Right margins my both be set to 0. This will result in a warning when you print, but it makes the adjustment process esier, and the warning may be ignored.
Repeat the check-adjust-print-check cycle until you're satisfied with the results.
=====Add the info to the layout======
When you have the labels aligned to your satisfacton, SAVE the DB document, then go Layout > Layout to return to layout mode.
Press command-A to select all (the two circles), then press Delete to remove them from the layout.
Select the Text tool ("A").
In the space below the body line (and far enough from it to avoid accidently moving it) drag a text frame slightly less wide than the label.
Type in your address information, and format it as you see fit.
Click the Selection tool (Arrow) to select the text frame, then use the arrow keys to move it into position on the layout. (Turn Autogrid on for faster movement; off for finer control.)
If the text box will not fit into the vertical space, Go Format > Size > and choose a smaller size for your text.
Print a test sheet (plain paper). If necessary, adjust the position of the text by selecting the frame (Use command-A) then moving it with the arrow keys.
Regards,
Barry
PS: Why use the arrow keys?
You're working close to the (moveable) Body boundary a lot of the time. A slip of the mouse can make it necessary to trash everyhing done up to that point. To avoid that, avoid any use of the mouse that's close to that boundary.
B

How to extract data from a resultset returned by SQLX query

Hi all,
I'm doing a project in which I use SQLX query to extract data and format it into xml from an object-relational database, and return it to a windows application. But when the resultset is returned, I don't know how to extract and display the data from it. The datatype of returned data might be XmlType, but i don't know how to process it..Can anyone help? It's urgent.. Thanks a lot in advance...
Joanne

You can use XMLType.extract().

How to get value from API which returns parameter in PL/SQL table?

Hello
I have below workflow API with returns info in PL/SQL table. I want to get value of 'USER_ORIG_SYSTEM_ID' column. How can i get that value in local variable.
Please help.
Thanks
Avalon
Wf_Directory.GetRoleInfo2
Syntax
procedure GetRoleInfo2
(Role in varchar2,
Role_Info_Tbl out wf_directory.wf_local_roles_tbl_type);
Description
Returns the following information about a role in a PL/SQL table:
• Name
• Display name
• Description
• Notification preference (’QUERY’, ’MAILTEXT’, ’MAILHTML’,
’MAILATTH’, ’MAILHTM2’, ’SUMMARY’, or, for Oracle
Applications only, ’SUMHTML’)
• Language
• Territory
• E–mail address
• Fax
• Status
• Expiration date
• Originating system
• Originating system ID
• Parent originating system
• Parent originating system ID
• Owner tag
• Standard Who columns
*******************************************************

create a variable RoleXXX wf_directory.wf_local_roles_tbl_type;
call procedure GetRoleInfo2('TEST_ROLE',RoleXXX)
use RoleXXX.USER_ORIG_SYSTEM_ID

How to stop Finder from opening new windows to view contents of folders.

I have 2 folders on my desktop, called "Home" and "Work." Both are aliases to files stored in user/documents on my HD. Both contain many folders within folders within folders and, ultimately, documents. When I double click on the "Home" desktop alias, a finder window opens showing contents. When I click on any folder within that window, it does what I want it to...switches to the contents of that folder (within same window, without opening a new one.) This works for everything in that folder.
When I double click on a folder within the "Work" folder, however, it opens a new window at every level. By the time I get to the document I want, I may have 5 or 6 windows open, which I then have to manually close.
I have gone into Finder/Preferences/General and the "Always open new window" box is NOT checked. Any one know why it would still be doing this? (No new applications are opening when I click on the folders, just a new finder window.) And why would it do it for one desktop folder and not the other?
I looked through discussions till my head spun and only saw the Finder/Preferences fix, so I'm hoping there's another fix, like a preference file somewhere that I just need to trash. Any help would be appreciated.
Powerbook G4 Mac OS X (10.3.9)

I don't know if this is the problem, but for windows in "Icon" or "List" view that are set so that the "Toolbar" is not showing, a folder opened within that window will tend to open a new window. This is just a difference in behaviour between the two modes. To show / hide the toolbar, try clicking the elongated button in the upper right corner, in the "titlebar" of the window, or choose "Show Toolbar" / "Hide Toolbar" from the "View" menu.
Additionally, a workaround might be to switch to "Column" view ("View" > "as Columns" ⌘3), since opening a folder within a window in "Column" view does not appear to spawn a new window, even with the "Toolbar" hidden. Another option might be to hold down the "option" key while opening the folder - this causes the previous window to close as the new window is opened.

How to prevent Finder from indexing and searching specific folder?

One of my folders contains hundred of thousand of small files, its a dataset for study, its not a personal files and I don't care at all to know what's in there. Because it too huge every time I try to find anything in finder I see the majority of the results coming from this folder. Also, I believe that because this dataset is updated from time to time this will slow my machine every time it tries to index it.
My question: Is there a way to make Finder NOT seeing a specific folder or directory?
Many thanks,,

System Preferences > Spotlight > Privacy > Add the folder

How can i find from bookmarks from and older installation

It will no older installations 07/01/2014.

Is the older installation on the same computer or on another computer and is the older installation and Firefox still l working.
*See [[Restore bookmarks from backup or move them to another computer]]
Please read the article I have linked to then post back with how you get on and provide further information if you have difficulties.

How do we find from PO to return document

Similar Messages

Maybe you are looking for