How do we read the values in a tiled view,in the submitted form ?

Hi,
I have a form, which is having a tiled view. Each row in the tiled
view has a check box. I have to read these check box selections, once
the page is submitted. Is there any built in mechanism in JATO to do
this ?
One way I know is to maintain a hidden field in the form and have a
javascript handler to create a string to reflect the check box
selectios and set that string as hidden field value, before submitting
the form. On the serverside read the hidden field's value and parse
that string to get the selections.
Are there any other options?
Thanks in Advance,
syam.

While a front panel variable is inside a loop, it's not available to other loops.
I want to access the value of the variable in many loops.
And I want to write to a front panel variable in many loops, too.

Similar Messages

Getting the Values from a Tiled View

Hi,
I have a TiledView and I have checkbox in the tiled view. I am trying
to get the values of the checked boxes.
I have coded like this.
Object[] links = getRSystemLinks().getCbSystemUrl().getValues();
if I see the links.length i get only one. In html If I see the code
it appends the TileIndex in brackets. If I replace the TileIndex with
0 in all the fields in endCbSystemUrl method I get the correct values.
In the TiledView beginDisplay() method my code is like this.
if (getPrimaryModel() == null) throw new ModelControlException
("Primary model is null");
super.beginDisplay();
resetTileIndex();
pgCustomizeLinksViewBean parentBean = (pgCustomizeLinksViewBean)
getParent();
((DatasetModel) getDefaultModel()).setSize
(parentBean.SystemChoicesValue.size());
Any Suggestions on this.
Thanks
Namburi

Namburi--
Remember, the getValues() method does not return the values from a column in
a TiledView. It is strictly for use by fields that can have multiple
values, like multi-select list boxes.
DO NOT remove the indexing feature from the field names, especially in the
case of checkboxes, because checkboxes aren't submitted back to the server
unless they are checked. By overriding the automatic checkbox tracking
feature JATO provides, you won't be able to tell which checkboxes were
actually checked by row--you'll simply get back a list the same size as the
number of checkboxes that were checked, without any placeholders for the
ones that weren't checked.
Instead, on submit, you simply need to move through the tiledView and check
the value of checkbox on each row:
tiledView.beforeFirst();
while (tiledView.next())
if (getDisplayFieldBooleanValue("myCheckBox"))
You can use the same construct to build up an array or list:
List checkedList=new LinkedList();
tiledView.beforeFirst();
while (tiledView.next())
if (getDisplayFieldBooleanValue("myCheckBox"))
checkedList.add(new Boolean(true))
else
checkedList.add(new Boolean(false))
Todd
Todd Fast
Senior Engineer
Sun Microsystems, Inc.
todd.fast@s...
----- Original Message -----
From: <vnamboori@y...>
Sent: Wednesday, October 17, 2001 3:49 PM
Subject: [iPlanet-JATO] Getting the Values from a Tiled View
Hi,
I have a TiledView and I have checkbox in the tiled view. I am trying
to get the values of the checked boxes.
I have coded like this.
Object[] links = getRSystemLinks().getCbSystemUrl().getValues();
if I see the links.length i get only one. In html If I see the code
it appends the TileIndex in brackets. If I replace the TileIndex with
0 in all the fields in endCbSystemUrl method I get the correct values.
In the TiledView beginDisplay() method my code is like this.
if (getPrimaryModel() == null) throw new ModelControlException
("Primary model is null");
super.beginDisplay();
resetTileIndex();
pgCustomizeLinksViewBean parentBean = (pgCustomizeLinksViewBean)
getParent();
((DatasetModel) getDefaultModel()).setSize
(parentBean.SystemChoicesValue.size());
Any Suggestions on this.
Thanks
Namburi
[email protected]

How to re-read a spool, modify it and re-saving the spool.

Hi Experts,
Can any tell me how to re-read a spool out of spool system, modifying the output and re-saving the spool.
I need to replace the total no. of pages count on every page of the spool. It is the list format.
Thanks in Advance.
Govind Parmar.

Hi
Do u want tot retrieve the data of spool?? If so then check it out
Read Temse data from UNIX filesystem and display. You must reconstruct the relationship between Temse tables and the spool files (tables TST01 and TSP01) for this to work. Dname, Rqident, Dsize are the important fields. This was used to retreive deleted spool output pertaining to an important project. Spool cleanup job RSPO0041 deleted the spool files regardless of the Delete after date
<u><b>
Procedure :</b>
</u>
Restore the spool files (assuming you employ spool_method G and also backup /sapmnt/SID/global/xxxSPOOL directory) in a temp. directory and rename them to numbers which will not overwrite the existing max(dname) in TST01.
Using ABAP or SQL copy in the same table, a row from both TST01 and TSP01 and update TST01:Dname (spool name), TST01:Dsize (size of the spool file in bytes) and TSP01:Rqident (spool number)
REPORT ZREADSP.
PARAMETERS: ZNAME(6).
DATA: HAND4(28) TYPE X,
      LN TYPE I,
      LN2 LIKE RSTSTYPE-LINELENGTH,
      BUFFER(132),
      RSTSRC(6),
      ERRMSG(50),
      HIDE_CLIENT LIKE TST01-DCLIENT VALUE '200',
      HIDE_NAME   LIKE TST01-DNAME ,
      HIDE_PART   LIKE TST01-DPART VALUE '1',
      FULL_NAME(40).
DATA:BEGIN OF BUFTAB OCCURS 1002,
            TXT(8000),
      END   OF BUFTAB.
CONCATENATE 'SPOOL' ZNAME INTO HIDE_NAME.
CALL 'C_RSTS_OPEN_READ' ID 'HANDLE' FIELD HAND4
                       ID 'CLIENT' FIELD HIDE_CLIENT
                       ID 'NAME'   FIELD HIDE_NAME
                       ID 'PART'   FIELD HIDE_PART
                       ID 'RC'     FIELD RSTSRC
                       ID 'ERRMSG' FIELD ERRMSG.
CALL 'C_RSTS_READ' ID 'HANDLE' FIELD HAND4
                   ID 'BUFTAB' FIELD BUFTAB-*SYS*
                   ID 'MAXIX' FIELD 10000
                   ID 'RC'     FIELD RSTSRC
                   ID 'ERRMSG' FIELD ERRMSG.
CALL FUNCTION 'RSPO_SPOOLDATA_WRITE_INIT'.
LOOP AT BUFTAB.
LN = STRLEN( BUFTAB-TXT ).
IF LN > 0.
    LN2 = LN.
    CALL FUNCTION 'RSPO_SPOOLDATA_WRITE'
     EXPORTING
          SPOOL_DATA     = BUFTAB-TXT
         DATA_LENGTH    = LN2
     EXCEPTIONS
          DATA_TOO_SHORT = 1
          OTHERS         = 2.
ELSE.
    SKIP.
ENDIF.
ENDLOOP.
<u></u>
Regards
Pavan

How do I insert the value of an email field in the submit mailto: argument?

I want to create a button that will redirect a PDF form to an email address entered as a field in the form. In other words, a "return to sender" function. The button function has a submit to URL where you can use "mailto:[email protected]". How can I substitute the value from an email field in the form itself for the "[email protected]" value?

You'll need to use JavaScript, and the mailDoc method in particular: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.505.html
Get the value of the field that contains the email address and use it as the value of the cTo property. See the following for a sample script: http://forums.adobe.com/message/3553628?tstart=-1

How can get the value of a HtmlInputText (created in the bean)

Hi All,
I have created a HtmlInputText object in the Backing Bean (the getter and setter are in another Bean used to manage the data, getEditableInputText and setEditableInputText)
//getter and setter in Bean
public HtmlInputText getEditableInputText() {
return this.editableInputText;}
public void setEditableInputText(HtmlInputText editableInputText) {
this.editableInputText = editableInputText;
I set the value in the Backin Bean
The HtmlInputText is bound in the xml in this way:
<h:inputText id="test" binding="#{Bean.editableInputText}"></h:inputText>
When I load the page I can see the TextField with the value that I set previously (in the backin bean).
The problem is when I try to change the value of the texField:
I change the value, then I click on a button (its action is to call a method to get the value of the field).
In debug mode I see that the value is allways the first set instead of the new value inserted.
I tried with getValue and similar but it does not work.
I tried also to put HtmlInputText in a panel (using a similar logic) and then to get it using getChildren() method but also this does not work.
Any idea?
Thanks in advance

Ok (now I understand)
I have used bean.getEditedInputText() and it is not null.(I got the HtmlInputTextObject)
But bean.getEditedInputText().getValue has allways the first value set.
If I don't set previously the value (in the backin bean) the getValue() is allways null.
So my problem is that I can set but I cannot get the Value when I change it.
Edited by: LucaMane on Nov 16, 2008 5:13 AM

How to validate the values inputted in Salestext view at MM02 before saving

Hello All,
Does anyone know what FM or user exit to use in order to validate the values inputted in Salestext view at MM02 transaction before saving it.
Regards,
Alfred

Hello,
Find the user exits if any after finding keep the break point in the exits and check that cursor is trigrring that exit or not. If it triggers check the value of the salestext exits in the exporting parameters or not.
if exits then keep do the validations.
UserExits MM02
MGA00001            Material Master (Industry): Checks and Enhancements
MGA00002            Material Master (Industry): Number Assignment
MGA00003            Material Master (Industry and Retail): Number Display

Photo Stream issue. Photo Stream shows 263 photos when viewed on the iMac, 289 when viewed on the iPad and 327 when viewed on the iPhone. How can this be?

Photo Stream issue. Photo Stream shows 263 photos when viewed on the iMac, 289 when viewed on the iPad and 327 when viewed on the iPhone. How can this be? Tried shut down on all devices, reboot and the results are the same.

Photo Stream issue. Photo Stream shows 263 photos when viewed on the iMac, 289 when viewed on the iPad and 327 when viewed on the iPhone. How can this be? Tried shut down on all devices, reboot and the results are the same.

Where is the value of report repository stored in the database?

Hi all,
One of our developers is trying to write a code that would send the output report (pdf)of a process through mail, typical work flow stuff.But the problem is that we are not supposed to hard code the value of report repositiry from where the report has to be picked.can anybody suggest a table in the database from where the value of report repository can be queried.
we tried using
select reportrepositorypt from pswebprofile.
but this doesnt return the correct path. we went to PIA->peopletools->webprofile ->webprofie configuration
here we updated the value in report repository field and saved it and queried again.
But this didnt solve our problem.
Its showing the previous value which is different from the actual report repository path.
all the servers are in solaris box.
please suggets.
Thanks!

Right now, I am trying to send a PDF (XML Publisher report) as an email to our vendors (it is their ACH Advice).
What I have done so far is: Created an App Engine, one step to populate a state record with run control information and the second step that runs XML Publisher and creates PDF report(s) which are published to the Report Repository and saved to a file on our network. Now I think I just need to create a third step to recall the PDF(s) and send the PDF(s) out as emails to our vendors.
I have found that the PDF information from Report Repository is stored in the Database in the CDM_LIST_VW record (this is a view and the main underlying table is CDM_LIST, but this contains what I need for now, so I'm going to try using it first). The Report ID is stored in the CONTENTID field and the Report Description (description shown on the Report Repository -- which in our case contains the email address) is stored in the CONTENT_DESCR field. So I am going to try over the next week to write the logic to query the CDM_LIST_VW for the data needed for the email address and the ReportID to go and grab the file....The hardest part is finding the actual file but I am hoping that I can also find a URL on that table. I'd pull the file from the network, but XML Publisher writes them out into numbered folders where all the PDFs are named the XML Report Defn - thus same name). I have not tried any of this yet, but am hoping I'm on the right path.
I hope this helped answer your question.
Good Luck!
Jennifer

DB2Exception - The value of a host variable in the EXECUTE or OPEN statemen

I want to store a XML file into database.
To undersdande my problem, please see the code below:
java.sql.Connection conn = null ;
PreparedStatement ps;
// Here I'm calling a function to get Database Connection.
String sXmlFile = "" ; // This variable stores a XML file as String
String sSQL = "INSERT INTO Crs_x_xml (XML_TRAN_ID,XML_MESSAGE,SUSPENDED_FLAG ) VALUES(?,?,?)";
try {
     ps = conn.prepareStatement(sSQL);
     ps.setLong(1,1);
     ps.setBytes(2, sXmlFile.getBytes());
     ps.setString(3,"A");
     ps.executeUpdate();
     conn.close();
} catch (Exception e) {
     e.printStackTrace();
The Problem:
The table Crs_x_xml that I used has three columns, the first is a int, the second is a BLOB and third is Char(1) and its in DB2 running on AIX.
Sometimes it execute very well. But sometimes gives following error :=
COM.ibm.db2.jdbc.DB2Exception: [IBM][CLI Driver][DB2/AIX64] SQL0302N The value of a host variable in the EXECUTE or OPEN statement is too large for its corresponding use. SQLSTATE=22001
I dont know whats going wrong. Plz help....
~Abhijeet

Hi,
I am using a CMP query in websphere, in which i am trying to execute a select query.
The query is as follows:
SELECT OBJECT(o) FROM HrTmmbrAct o WHERE o.tmmbrActC IN ( 1,2,3 ) AND o.effD BETWEEN '2000-02-11' AND '2008-02-22'
The tmmbrActC is defined as a string in the Websphere CMP fields. I am not sure now to pass the value to it. Do we need to pass it as objects. pls help.
Thanks
- Giri

The value 1 is not allowed for the field variace key

Hi experts,
When i was creating material master i was getting the status message as "the value 1 is not allowed for the field variance key" , but its stopping there its not moving out of that screen and creating the material record. When i see this field in the material master configuration its an optional field. Can you give me suggestions, where it can go wrong.
Thanks & Regards,
Ravi.

Hi
Can u tell me the field name . I cant get that field ref key. In which view does it come.
Reg
Raja

Re: [iPlanet-JATO] Re: Retrieving all Values from a Tiled View

Todd,
Let me try to explain you this time. I have a text field in a TiledViewBean.
When I display the page, the text field
html tag is created with the name="PageDetail.rDetail[0].tbFieldName" say
five times/rows with same name.
The html tags look like this.
<input type=text name="PageDetail.rDetail[0].tbFieldName" value=""
maxlength=9 size=13>
<input type=text name="PageDetail.rDetail[0].tbFieldName" value=""
maxlength=9 size=13>
<input type=text name="PageDetail.rDetail[0].tbFieldName" value=""
maxlength=9 size=13>
When the form is submitted, I want to get the text field values using the
method getTbFieldName().getValues() which
returns an array object[]. This is in case where my TiledViewBean is not
bound and it is working fine.
Now in case when my TiledView is bound to a model, it creates the html tags
as follows.
<input type=text name="PageDetail.rDetail[0].tbFieldName" value=""
maxlength=9 size=13>
<input type=text name="PageDetail.rDetail[1].tbFieldName" value=""
maxlength=9 size=13>
<input type=text name="PageDetail.rDetail[2].tbFieldName" value=""
maxlength=9 size=13>
Now when I say getTbFieldName().getValues() it returns only the first
element values in the object[] and the rest of the
values are null.
May be we need to create a utility method do get these values from
requestContext.
raju.
----- Original Message -----
From: Todd Fast <toddwork@c...>
Sent: Saturday, July 07, 2001 3:52 AM
Subject: Re: [iPlanet-JATO] Re: Retrieving all Values from a Tiled View
Raju.--
I wanted to know how the getValues() method works the reason being,
when the tiled view is NOT bound to a model, it populates all the
fields with the same name as some thing likeI'm afraid I don't understand your point--can you please clarify? Do you
mean "value" instead of "name"?
What are you trying to do? What behavior are you expecting but notseeing?
>
Without further clarification, I can say that the setValues() methodsNEVER
populates data on multiple rows of a (dataset) model, nor does it affect
multiple fields on the same row. Perhaps what you are seeing is theeffect
of default values. Model that derive from DefaulModel have the ability to
carry forward the values set on the first row to other rows in lieu ofdata
in those other rows. This behavior is for pure convenience and can be
turned off, and it is turned off for the SQL-based models.
Todd
[email protected]

Hi,
I wanted to know how the getValues() method works the reason being,
when the tiled view is NOT bound to a model, it populates all the
fields with the same name as some thing like
PageDetail.rDetail[0].tbFieldValue
PageDetail.rDetail[0].tbFieldValue
in which case, the getValues() method works fine.
But in case where the tiled view is bound to a model, it populates
with different field names such as,
PageDetail.rDetail[0].tbFieldValue
PageDetail.rDetail[1].tbFieldValue
in this case, the getValues() doesn't work. Any soultion to this?
We are using Moko 1.1.1.
thanks in advance,
raju.
--- In iPlanet-JATO@y..., "Todd Fast" <toddwork@c...> wrote:
Does anyone know of is there a single method to get all values of a
display
field in a tiled view without having to iterate through all the
values ie
resetTileIndex() / nextTile() approach.
ie Something that returns an Object[] or Vector just like ND returned a
CspVector. I tried using the getValues() methods but that allways returns
a
single element array containing the first element.
(I think now, that method is used for multi selecteable ListBoxes)Actually, no. We can add this in the next patch, but for now, I'd recommend
creating a simple utility method to do the iteration on an arbitrary model
and build the list for you.
Todd

Is there a size limit for the txt files to be viewed in the ipod ?

when I pass a text file (.txt) in the notes folder, then I try to see it on my ipod nano, I can see just a part of it, the beginning. Is there a size limit for the .txt files to be viewed in the ipod nano? How to increase it?

4kByte file size, 1000 notes max.

After creating a new slideshow I export it with the setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?

After creating a new slideshow I export it with the setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?

DVD's are only 640 x 480 (interlaced), so yes, the quality is not nearly as good. You should probably create your .mov in DV format to best match the DVD format

How can I access the value of a loop index outside the loop?

I have a sequence structure in Labview 8.6. At one frame of the sequence I have a while loop. The loop runs for a while and then stops and the program then moves to the next frame of the sequence. Several frames further on down the sequence I have a cluster, the elements of which are outputs on the front panel. The index of the mentioned loop is one of the cluster elements, an numeric output. While the loop is running, I want the index to be displayed on the front panel in the output contained in the cluster. How can I do this?

The easiest way to do this is to use a local variable of your cluster. You'll need one copy set to read; connect that to a bundle by name, bundle in your index value from the loop, and wire the bundle output to a write copy of your local variable. You can create a local variable by right-clicking on the cluster terminal (in the block diagram) and choosing create local variable. You can change the local variable to read or write by right-clicking on it.
However, in general the use of both local variables and sequence structures is discouraged, and the right solution may be to rewrite your code with a while loop containing a case structure in which you update the cluster every time through the loop. This will look like a state machine; you'll also need a shift register in place of the loop iteration counter. If you post your code (ideally the VI, but if not then a screenshot of the block diagram) then we can provide more useful assistance.

How to get the value from a JavaScript and send the same to Java file?

Hi.
How to get the value from a JavaScript (this JS is called when an action invoked) and send the value from the JS to a Java file?
Thanks and regards,
Leslie V

Yes, I am trying with web application.
In the below code, a variable 'message' carries the needed info. I would like to send this 'message' variable with the 'request'.
How to send this 'message' with and to the 'request'?
Thanks for the help :-)
The actual JS code is:
function productdeselection()
var i=0;
var j=0;
var deselectedproduct = new Array(5);
var message = "Are you sure to delete Product ";
mvi=document.forms[0].MVI;
mei=document.forms[0].MEI;
lpi=document.forms[0].LPI;
if(null != mvi)
++i;
if(null != mei )
++i;
if(null != lpi)
++i;
if(null != mvi && mvi.checked)
deselectedproduct[++j]="MVI?";
if(null != mei && mei.checked)
deselectedproduct[++j]="GAP?";
if(null != lpi && lpi.checked)
deselectedproduct[++j]="LPI?";
if( 0!=j)
if(i!=j)
for (x=0; x<deselectedproduct.length; x++)
if(null != deselectedproduct[x])
message =message+ "-" +deselectedproduct[x];
alert(message);
else
//alert(" You cannot remove all products!");
return false;
return true;
}

How do we read the values in a tiled view,in the submitted form ?

Similar Messages

Maybe you are looking for