How do you control when a Listbox updates the view?

I have a problem, that when I highlight a line programmatically in a multicolumn listbox (wrting to the value property) it can take quite a while before you actually see it on the screen.
I can work around it by disabling and again enabling the symbols, but as the list is quite long, this gives a noticeable delay.
Is there a better way to force a screen update?
Using Laview 6.0.2

There was a bug in LV5.1 that corrupted the listbox display.
It was not updated until the user cliked on it.
It does not occur consistently so I don't know if it has been fixed in
6.0.2.
Try to replace the listbox control on the front panel with a new listbox.
Jean-Pierre Drolet
"Anthony de Vries" a écrit dans le message news:
[email protected]..
> I have a problem, that when I highlight a line programmatically in a
> multicolumn listbox (wrting to the value property) it can take quite
> a while before you actually see it on the screen.
>
> I can work around it by disabling and again enabling the symbols, but
> as the list is quite long, this gives a noticeable delay.
> Is there a better way to force a screen up
date?
>
> Using Laview 6.0.2
LabVIEW, C'est LabVIEW

Similar Messages

  • How do you use PL/SQL to update a view?

    Hi there, I know how to use SQL to create and update a view. I am using it to pull data for a specific date.
    But now I want to find a way to parametized it (ie. the date) so that it can be run like a program each day (based on system date) to pull the latest data. I am thinking of using PL/SQL but not sure how it can be done.
    DECLARE
    run_date DATE := '10/12/2009';
    BEGIN
    END
    Can someone shed some light on how I can update a view? Thanks alot.

    Try this
    DECLARE
    run_date DATE := '10/12/2009';
    BEGIN
    execute imeediate 'create view view_name as select * from dual';
    END

  • How do you get itunes to stop updating the I pod?

    i want to add a bunch of CDs to my I Tune but i don't want them all to load into my i pod, when ever i plug my i pod into the computer they auto install everything into the i pod and its filling up with stuff i don't need on there, is there a way to get it so it doesn't install everything on itunes?
    thanks

    You can configure iTunes to sync only a subset of your music. Create a playlist in iTunes of the music you want on the iPod, and change the iPod sync settings. More info is here.

  • When curser is on hyper link the url will diplay on the bottom of the screen in the background.(where done is located when site is loaded) How do you control this function?

    When curser is on hyper link the URL will display on the bottom of the screen in the background.(where done is located when site is loaded) How do you control this function?

    Do you want to control that via code on a web page to prevent visitors from seeing the link or do you ask as a Firefox user?<br />
    Tools > Options > Content : JavaScript > Advanced > Allow Scripts to:
    [ ] "Hide the status bar"
    [ ] "Change the status bar text"
    The Status Bar will be gone in Firefox 4.0 and is replaced by the (View > Toolbars) Add-on bar that extensions can use.

  • How do you know when you have the latest software updates

    how do you know when yo have the lastest software updates on your older IPOD?  I just purchased on home theater to replace one, Samsung, I was assured that the system would run my IPOD.  I've sync'd my IPOD to my computer a number of times before the purchase and since.  Samsung is telling me that I need to update my IPOD.  My ITunes keeps telling me there aren't any updates out there.

    Read the top of the page I gave you the link to. The
    latest update that you do not have only added more
    support for the Shuffle. If you are not having any
    problems leave as is. If you have problems then
    download the update. It will ask you for your user
    ID. Once you install the updater, your computer will
    reboot.
    This is what it says at the download site.. iPod Software 1.0
    * iPod with video
    Everything is working fine Barb with the ipod but I was under the assumption that if an update is available, I should download it...

  • I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

    I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

    I think this is probably a sign that your network could be better than it is.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

  • When opening a Photoshop file with Bridge, how can I control which version of Photoshop the file wil

    When opening a Photoshop file fthrough Bridge, how can I control which version of Photoshop the file will open in?
    I store my PSD files adjacent to the original RAW file from which it was derived.
    If I open the file folder and double click on that PSD file, it opens in CS6. But,if I use Bridge (CS6) to navigate to and open the same file, it first opens Photoshop CS5 and then opens that PSD file in CS5.
    How can I control which Photoshop will open a file I select when opening it through Bridge?.

    Interesting, but it doesn't give a clue what I'm supposed to do. No Photoshop ducuments listed.
    Look at the PSD file on the location Curt provided and search for Photoshop Document. Next to it ideally should show Adobe Photoshop CS6 if you have Bridge CS6 open. Click on it to provide the fly out menu and choose the correct Photoshop from the list.
    But probably something went wrong with your install. By default Bridge chooses the latest version of PS to open its file in.
    Maybe a reset of the preferences might also help you. Can you provide more details about OS version etc.
    And do you have a good reason for keeping your Raw and finished files in the same location. Personally I keep them apart and use a proper file name convention (yyyymmdd and details) so I can easily search for the DNG files in my archive if I needed them but I don't make mistakes in opening the wrong one

  • How do you control playlist song sorting?

    how do you control playlist song sorting?
    in itunes - i set the iPOD playlist to sort by name - but it sorts in some random way when disconnected - on it's own..
    BTW: I created this by making the playlist manual in iPOD in itunes then dragging in songs to it from itunes....
    QL how do i get it to sort the iPOD playlist songs by name?

    In iTunes, right-click on one of the songs in your playlist, then select 'Copy to play order'.

  • How do you control the volume to the earphones?

    How do you control the volume to the earphones?

    Apple Support Communities updatesActually I knew that part of it, but I had to go to Settings to correct something.  They are working now that I fixed something that I have no recollection that I altered in the first place, nor do I now know what in heaven’s  name I fixed this time.  All I know is that I must have gone to setting a million and one times and the last time was the one I did something right.
    Thank you for your help however.
    Nan
    From: Apple Support Communities Updates
    Sent: Monday, July 07, 2014 10:43 PM
    To: nandave
    Subject: - How do you control the volume to the earphones?
                                                                                    You received a reply 
                                    petermac87 has replied to your question. You can view the full discussion in Apple Support Communities.                                                                                
    How do you control the volume to the earphones? 
                                    With the volume up and down keys unless you purchase a set with a volume control connected to the chord.
                                    Pete
                                                                                    Correct Answer Helpful Answer 
                                  Use the buttons above to tell petermac87 and the rest of the community if this reply solved your question or helped you get closer to finding a solution. 
                                  To reply to petermac87, go to the discussion in Apple Support Communities. 
                                  You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile. 
                                  TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014. 
                                  All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

  • How do you control number of cycles shown on chart

    How do you control number of cycles shown on chart?  I've selected a sweep chart and I'm not seeing the vertical bar on the chart when the program runs.  This is probably because I'm not seeing a full cycle of the periodic signal I'm trying to display.  I need to set the chart to display multiple cycles.  Any help will be greatly appreciated.
    Solved!
    Go to Solution.

    Right click the chart and set the desired number of points in the history buffer (right-click...chart history lenght...). Then set the x-axis not to autoscale and to cover your full history range.
    LabVIEW Champion . Do more with less code and in less time .

  • Hello..i have the macbook pro and i had a password when it opens and when i have updated the software when i delete something it asks me every time to put my password ;/ how do i delete my password or just correct a setting for it?

    hello..i have the macbook pro and i had a password when it opens and when i have updated the software when i delete something it asks me every time to put my password ;/ how do i delete my password or just correct a setting for it?

    You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type:  ‘resetpassword’ (without the ’s), hit return, and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.   
    Repair User Permissions

  • How do you turn off firefox to update it

    how do you turn off firefox to update it or to put in flash player adobe

    The update functions for Firefox and its Add-ons are controlled by your settings in Options > Advanced > Update tab. See: https://support.mozilla.com/en-US/kb/Options%20window%20-%20Advanced%20panel#w_update-tab
    To install or update Adobe Flash"
    #'''Update or Install the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
    #*Download and SAVE to your Desktop so you can find the installer later
    #*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
    #*After download is complete, exit Firefox
    #*Click on the installer you just downloaded and install
    #**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
    #*Start Firefox and check your version again or test the installation by going back to the download link below
    #*'''Download and information''': http://www.adobe.com/software/flash/about/
    #**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
    #**Use IE to go to the above site to update the IE ActiveX
    #*'''Download Manual installers'''.
    #**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
    #**Note separate links for:
    #***Plugin for Firefox and most other browsers
    #***ActiveX for IE
    <br />
    <br />
    '''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
    *Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers
    #'''''Check your plugin versions''''' on either of the following links':
    #*http://www.mozilla.com/en-US/plugincheck/
    #*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    #*'''Note: plugin check page does not have information on all plugin versions'''
    #*There are plugin specific testing links available from this page:
    #**http://kb.mozillazine.org/Testing_plugins
    #'''''Check your plugin versions''''' on either of the following links':
    #*http://www.mozilla.com/en-US/plugincheck/
    #*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    #*'''Note: plugin check page does not have information on all plugin versions'''
    #*There are plugin specific testing links available from this page:
    #**http://kb.mozillazine.org/Testing_plugins

  • On IOS 7, how can you tell when your battery is charging for your phone?

    on IOS 7, how can you tell when your battery is charging for your phone?

    thanks everyone=you all helped.
    I wasn't used to not getting the 2 sided plug- now I know I am ok>
    **hugs**

  • When you delete an app from your homescreen it is still in the cloud, does that mean you still have the app, and how do you get it back on to the home screen

    When you delete an app from your homescreen it is still in the cloud, does that mean you still have the app, and how do you get it back on to the home screen. new to ipad so do not know much. Anybody know.p

    As long as the app remains in the store then you can re-download it via the Purchased tab in the App Store app, or via the Purchased Link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
    Similarly ibooks can be re-downloaded, and depending upon what country that you are in then music, films and tv shows may also be re-downloadable (if they remain available in the store).

  • How do you know when your MacBook is infected?

    Hey All. Well my question is how do you know when your MacBook is infected with a virus? I came off windows and i have norton antivirus so i have something to tell me there. But on the Mac OS you rarely get viruses and i dont have a anitvirus program, so how do you know when you have one? And what does it do?
    Thanks!

    Since no ones got one that I know of it is hard to say. I figure that when the day comes that someone writes a Mac virus you will know real quick what happens. If your concerned you could use ClamXav. I use it if I download something for my wife's PC but have never found anything yet.

Maybe you are looking for