How do You Expand disk so image uses all disk during imaging

I have a WIn 7 Image with one partition @ 50gb (built it in VM)
automating the image and sysyprep works great BUT
the PC is a 256Gb HD but when it restores image it only create the 50GB
and the rest is not used
So what I did is created an INSTALL BUNDLE that ran a Install Script first
img -pd all
img -pc 1 -type=ntfs
then it restores the zmg Win7 image file
but that didnt work
any suggestions?

Ah ok. I built a Preboot Bundle and had the Image script first and then
just added the main image win7-Base Bundle and the addons images. So
because it is in my bundle I couldnt add a parameter to do the same
thing in the script section.
So I could do it all in the imaging script portion instead
My ACTIONS looks like this now
Pre Image Partition Script Imaging Script Enabled
Win7-Base ZENworks Image Enabled
Win7-Addon-Unattend ZENworks Image Enabled
Win7-Addon-Scripts ZENworks Image Enabled
Win7-Addon-Zaa ZENworks Image Enabled
Win7-Addon-Nwclient ZENworks Image Enabled
Win7-Addon-Toshiba ZENworks Image Enabled
So I would change it to
Pre Image Partition Script Imaging Script Enabled
And the Script would be
img pd-all
img pc1 ntfs
img pa1
img rp zcm_ip_address Win7-Base.zmg a1:p1
img rp zcm_ip_address Win7-Addon-Unattend.zmg
img rp zcm_ip_address Win7-Addon-Scripts.zmg
img rp zcm_ip_address Win7-Addon-Zaa.zmg
img rp zcm_ip_address Win7-Addon-Nwclient.zmg
img rp zcm_ip_address Win7-Addon-Toshiba.zmg
I making sense?
Thanks
On 18/05/2011 1:36 PM, nheyne wrote:
>
> You're on the right path, you just need to add "img pa1" after the first
> two strings, then put "a1:p1" at the end of the path like this:
>
> img pd-all
> img pc1 ntfs
> img pa1
> img rp $PROXYADDR image.zmg a1:p1
>
> We have the exact same scenario as you, we build our Windows 7 image in
> a VM with a 40GB partition, and this script will create a full partition
> first and then restore the image to it rather than letting the image
> decide how big to make it.
>
>

Similar Messages

How do you create a still image from a video using IMovies 11?

How do you create a still image from a video using IMovies 11 on a Pro Mac?

The simplest way is to do a simple screen capture.

How do you weed through duplicate images?

I love that Aperture allows tasks to be done many different ways. I'd like to hear some ideas on how to do this -
I am going through and finally getting my old photos from 2002 to current managed in Aperture. Many of the images are a mess on CD backup and more recent images are from the pc (I could get these from an EHD or in iPhoto). Long story short, I have LOTS of duplicate images from one disk to another. I mean the same photo two or three times.
My library has a top blue folder for the year. The projects within there are almost all by month year (i.e. Apr 2003). As far as I can tell, all of these images are the same - but one project might have an image that another one doesn't have. Should I worry about this or not? I am very detail oriented and anal about it - so set me straight if I need a slap into reality
Should I just go through my library and view by date and delete the duplicates without regard to which CD they came from? What would you do? How do you weed through duplicate images in this regard?
I'd love to hear your thoughts!

I almost thought you hit a winner there... even for general use. I started to read it and realized the import window cannot be resized. Why did I think that? Well, in general, have you ever imported from your camera and then took more pictures? Do you always remember what the last downloaded image was? Wouldn't it be great to resize that import window and see the actual library underneath to check??!
Anyway, my imports are done so .... last night I did a few months worth and I was in date view within 2003 (not the smart folder at the top under Library) and went through using the 9 key to reject the images that were duplicate. Some of them I could go to the project and reject in larger groups, but mostly it was one by one. It is a painstaking process, but ensures I have every image. Once I know I have it all, I will delete the rejects.
Keep in mind - my duplicates are not in the same project - they exist in multiple projects, sometimes two or three.
No other tips out there? I was sure there were enough power users that would have some secret tip to make life easier with Aperture.

How can you get a mirror image of a photo on iPhoto?

How can you get a mirror image of a photo on iPhoto?

By using an external editor. Preview is already on your Mac. It's called 'Flip Horizontal'
In order of price here are some other suggestions:
Seashore (free)
The Gimp (free)
Graphic Coverter ($45 approx)
Acorn ($50 approx)
Pixelmator ($50 approx)
Photoshop Elements ($75 approx)
There are many, many other options. Search on MacUpdate or the App Store.
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.

How do you display a new image in webdynpro view?

How do you display a new image in webdynpro view?
Where is the image stored and how do we specify the image path?

hi ,
The UI element Image enables you to integrate graphics into the Web application in a format that is processed by the Web Server u2013 for example, GIF, JPG, and PNG format. Height and width of the graphic can be specified using the properties height and width. The graphic is displayed without borders.
saveur image as mime
with Mime Objects u cn upload doc , jpeg, or giff files from our local system into the webdypnpro system .
Right click on ur component->mime object->import
In the transaction sicf/bc/webdynpro , u cn check your component name there you can view the mime objects created by you .
also refer the SAP online help :
http://help.sap.com/saphelp_crm50/helpdata/en/46/bb182fab4811d4968100a0c94260a5/content.htm
to knw more abt mime repositories.
http://help.sap.com/saphelp_nw04/helpdata/en/f3/1a61a9dc7f2e4199458e964e76b4ba/content.htm
regards,
amit

How will you know if someone is using video chat?

How will you know if someone is using video chat? Does the green camera indicator turns red?

Hi,
You Buddy List will show two types of AV icons.
"Single" type which indicates the person can only do 1-1 Chats.
"Stacked" icons indicating they can do Multi-way chats.
Example pic
If they appear feint or "greyed out", so to speak, then they are Busy to someone else.
(if they are chatting with you they will appear dark again once connected)
9:01 PM Tuesday; November 15, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How do you save a transformed image?

Windows Store App 8.1.
I have an image that the user has rotated, scaled and clipped etc. How do you save the transformed image?
There are solutions of the forums but these use the System.Media.Imaging library that isn't available, classes like the TransformedBitmap etc. are not available.
I'm playing around with this approach but the decoder throws a "The image format is unknown";
imageManipulation is UIElement.Image.
Any ideas on how to achieve the saving of a Transformed image in a 4.5.1 8.1 store app?
RenderTargetBitmap rtb = new RenderTargetBitmap();
await rtb.RenderAsync(imageManipulation, (int)imageManipulation.ActualWidth, (int)imageManipulation.ActualHeight);
IBuffer buffer = await rtb.GetPixelsAsync();
using (InMemoryRandomAccessStream ras = new InMemoryRandomAccessStream())
await ras.WriteAsync(buffer);
await ras.FlushAsync();
BitmapDecoder dec = await BitmapDecoder.CreateAsync(BitmapDecoder.BmpDecoderId, ras);
Rob

Hi,
You can use BitmapEncoder to apply transforms such as scaling and cropping, set metadata and properties, and edit pixels while preserving any unedited
data. After transform the data, you can copy the contents from the in-memory stream to the original file’s stream and close all of the streams. That make you can save the encoded image to the file:
memStream.Seek(0);
fileStream.Seek(0);
fileStream.Size = 0;
await RandomAccessStream.CopyAsync(memStream, fileStream);
fileStream.Dispose();
memStream.Dispose();
You can see the link to get more information:
https://msdn.microsoft.com/en-us/library/windows/apps/xaml/jj709937.aspx
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

How do you construct a web form using coldfusion??

How do you construct a web form using coldfusion?? any
examples?
thanks in adv.

A sample Form:
<cfform action="CCARProc.cfm"
enctype="multipart/form-data" method="post" name="CCAR"
onsubmit="return verify()">
<table width="730" border="0" cellpadding="2"
cellspacing="1" align="center" class="unnamed1">

<tr valign="top">
<td colspan="3" bgcolor="#F2F2F2">Name Of
Requester(<font color="red">*</font>)</td>
<td width="402" bgcolor="#F2F2F2"><cfinput
type="text" name="Requestor_Name" size="15" value="#REQNAME#"
maxlength="25" >
MTABT Email(<font
color="red">*</font>)
<cfinput name="Req_Email" type="text" size="8"
maxlength="20" value="#ReqEmail#"
>@mtabt.org</td></tr>
<tr>
<td colspan="3">Requester Telephone #(<font
color="red">*</font>) </td>
<td><cfinput type="text" VALUE="#REQPHONE#"
name="RPhone" size="12" maxlength="12" message="Requester Phone
cannot be blank / Invalid Entry!" required="yes"
validate="telephone"> [e.g. xxx xxx xxxx or
xxx-xxx-xxxx]</td>
</tr>
<tr>
<td colspan="3" bgcolor="#F2F2F2">Facility(<font
color="red">*</font>)</td>
<td bgcolor="#F2F2F2">
<cfselect name="Facil">
<option value="2B">2B </option>
<option value="BBT">BBT </option>
<option value="BW">BW </option>
<option value="CB">CB </option>
<option value="HH">HH </option>
<option value="MP">MP </option>
<option value="QMT">QMT </option>
<option value="RI">RI </option>
<option value="TM">TM </option>
<option value="TB">TB </option>
<option value="TN">TN </option>
<option value="VN">VN </option>
</cfselect>
</td>
</tr>
<tr>
<td colspan="3">Department(<font
color="red">*</font>)</td>
<td><cfselect name="Dept">
<option value="Contracts">Contracts </option>
<option value="Engineering">Engineering
</option>
<option value="Executive Office">Executive
Office</option>
<option value="Finance">Finance </option>
<option value="General Counsel">General Counsel
</option>
<option value="HS">HS </option>
<option value="HR">HR </option>
<option value="ISD">ISD</option>
<option value="Legal">Legal </option>
<option value="Labor Relations">Labor Relations
</option>
<option value="Operations">Operations </option>
<option value="Payroll">Payroll </option>
<option value="Planning & Budget">Planning &
Budget </option>
<option value="Procurement & Mtrl">Procurement
& Mtrl </option>
<option value="Purchasing">Purchasing </option>
<option value="Revenue Management">Revenue Management
</option>
<option value="Staff Services">Staff Services
</option>
<option value="SD">SD</option>
<option value="Technology">Technology</option>
</cfselect></td>
</tr>
<tr>
<td colspan="3" bgcolor="#F2F2F2">Division(<font
color="red">*</font>)</td>
<td bgcolor="#F2F2F2"><cfinput name="Div"
type="text" size="20" maxlength="25" VALUE=""></td>
</tr>
<tr valign="top">
<td height="27" colspan="3" >Justification(<font
color="red">*</font>)</td>
<td bgcolor=""><textarea name="Justi" cols="50"
rows="3" wrap="VIRTUAL" ></textarea> </td>
</tr>
<tr>
<td colspan="3" bgcolor="#F2F2F2">VP Approval
By (<font color="red">*</font>)</td>
<td bgcolor="#F2F2F2"><cfinput name="VPAppFName"
type="text" size="20" maxlength="25" VALUE="#VPFName#">
MTABT
Email(<font color="red">*</font>)
<cfinput name="VPE" type="text" size="8" maxlength="20"
value="#VPEmail#" >@mtabt.org</td>
</tr>
<tr>
<td colspan="3" valign="top"
bgcolor="#F2F2F2"></td>
<td colspan="2" rowspan="2" valign="top"
bgcolor="#F2F2F2"><div align="left">
<input name="Submit" type="submit" value="SubmitTheForm"
class="button"
style="font-size='10pt';color='#663399';font-face='Arial,
Helvetica, sans-serif';" >
<input name="Reset" type="reset" value="ReSetTheForm"
class="button"
style="font-size='10pt';color='#663399';font-face='Arial,
Helvetica, sans-serif';">
</div></td>
<td width="90" valign="top"
bgcolor="#F2F2F2"></td>
</tr>
</table>
<div align="right"><span class="style4">Revised(
01.28.05 )</span>
<input name="submitDate" type="hidden"
value="<cfoutput>#DateFormat(Now(),'mm/dd/yy')#</cfoutput>">
</div>
</cfform>

HT5538 How do you separate multiple iOS devices using the same apple id account for Face Time calls and iMessaging?

How do you separate multiiple ios devices using the same apple id account for Face Time calls and iMessaging?

The only way I have seen is to have each device use a if fervent email account, if they all are on the same email the FaceTime connection is either to a phone number or to an email address. If they ar all on the same email, it is up to the user to decide which to use.

HT4191 iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad? If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account.

iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad? If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account. I've seen reference to the "My iPhone" local storage put no mention on how you create this folder or access this folder within the Notes app. I realize storing information in a local storage like this provides no syncing between other iDevices but that is exactly what I'm looking for. I'm running iOS7.0.4 on a iPhone 5S, and a iPad Air. Any help would be greatly appreciated.

If you go to Settings > Notes > Default Account you will see "On My iPhone" as the default account and the only choice if you have not enabled syncing Notes in Settings >iCloud or Settings > Mail, Contacts, Calendars. If you have enabled syncing you can still select "On My iPhone" as the default account. When you are in the Notes app you won't see any accounts listed if you have not enabled syncing because they are all in the On My iPhone account and that is the only place possible. It is not a folder that you create.

How can you add a where clause using "OR" with applied ViewCriteria?

[JDeveloper 10.1.3 SU4]
[JHeadstart 10.1.3 build 78]
I am using JHeadstart, but have a question probably more in the ADF area. On the JHeadstart forum I asked:
"I am overriding JhsApplicationModule's advancedSearch in order to be able to search in childtables. I created transient attributes, display those in advanced search and in the overridden method I check if any of these are filled by the user and create a where clause like 'EXISTS (SELECT 1 FROM <childtable> WHERE <column in childtable> = <column in EO's table> AND <another column in childtable> LIKE '<value supplied by user>)'. I add this whereclause using ViewObject.setWhereClause.
So far so good and it works. However, if the user selects 'Result matches any criteria', combining setWhereClause and the normal advancedSearch QueryByExample implementation using ViewCriteriaRow do not provide the desired result, since the ViewCriteria and the setWhereClause are AND-ed together, which is fine if the user selects the (default) "Results match all criteria" (everything is AND-ed) but not the "Result matches any criteria", since then every criterium is OR-ed together, except for the setwhereclause criteria and the set of ViewCriteriaRows, they are AND-ed.
I looked if I could specify that a WhereClause will be OR-ed to existing applied ViewCriteria, but no luck. Do I have to rewrite also advancedSearch's ViewCriteria implementation and write an entire setWhereClause implementation to be able to "OR" every criterium? Or any other suggestions? Can I look at the entire Where clause and rewrite it (after applyCriteria and setWhereClause are called on the VO)?
Toine"
Sandra Muller (JHeadstart Team) told me today: "This sounds like a JDeveloper/ADF issue that is not related to JHeadstart. The question is: how can you add a where clause using "OR" if there are already one or more ViewCriteria applied?
To simplify the test case, you could create a simple ADF BC test client class in a test Model project without JHeadstart (in the test class, use bc4jclient + Ctrl-Enter), in which you first apply a few ViewCriteriaRows to a View Object and also add a where clause.
Can you please log a TAR at MetaLink ( http://metalink.oracle.com/ ), or ask this question at the JDeveloper forum at http://otn.oracle.com/discussionforums/jdev.html ? (This what I am doing now ;-))
Thanks,
Sandra Muller
JHeadstart Team
Oracle Consulting"
Anyone knowing the answer or am I asking for an enhancement?
Toine

Hi,
Can you SET your whereclause as follows ?
('Y' = <isAnd>
and EXISTS (SELECT 1 FROM <childtable> WHERE <column in childtable> = <column in EO's table> AND <another column in childtable> LIKE '<value supplied by user>))
OR ('N' = <isAnd>
AND EXISTS (SELECT 1 FROM <childtable> WHERE <column in childtable> = <column in EO's table> OR <another column in childtable> LIKE '<value supplied by user>))
)

How can you keep your iPhone 4 (using it as my car's iPod) staying on the Audible app? When I leave the car and return to continue hearing a book, it has switched to iTunes.

How can you keep your iPhone 4 (using it as my car's iPod) staying on the Audible app? When I leave the car and return to continue hearing a book, it has switched to iTunes.

The first time an iPhone is connected to iTunes that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device or to set up the iPhone as a new iPhone.
The former does as provided - it transfers the backup for the other iPhone or iOS device to the iPhone replacing all data on the iPhone that is included with the backup being transferred. The latter does nothing allowing you to make your various selections for the iPhone sync preferences with iTunes.
This is designed to be done right away with a new iPhone.
If you don't have a backup for the iPhone with iTunes on your computer and don't have an iCloud backup that hasn't been updated since choosing to transfer the backup for your iPod Touch to the iPhone, the data that was on the iPhone is gone.

How do you know what classes to use ?

Hello,
This may sound daft - but how do you know what classes to use to do a particular task ? For example to do password-related stuff - how would I know which classes are all relevant to that ? Am I supposed to buy a book on the classes as the API documentation doesn't really tell you WHEN to use which classes.

If you're using JSP, then your password field is likely going to be implemented in HTML. So that's nothing to do with Java. (And you can't use a JPassword field in a JSP page.) But when that field comes back to your server, you may be using Java to authenticate it. Even there, the question is not yet what Java method you are going to use, but what methodology. You could have a database to authenticate against, or an LDAP directory. Or you could have the web server use its built-in authentication, which means you don't have to do any Java coding at all. And there are other ways.
So the question before yours is, how do you know what methodology to use? Again, that comes down to experience.

When making a photo book in Aperture. How do you eliminate having the image numbers under the pictures?

When making a photo book in Aperture. How do you eliminate having the image numbers under the pictures?

Click the "Book Actions" cogwheel and select "Page Numbers " -> "Off"
Regards
Léonie

How do you print multiple different images on a single page in preview

How do you print multiple different images on a single page in preview?

Chances are no one who saw your question knew the answer.
Unless you're willing to share the answer you found here, then anyone else like you searching for the problem who comes across this thread will also be unable to thank you for providing the answer too.

How do You Expand disk so image uses all disk during imaging

Similar Messages

Maybe you are looking for