How do you get a single point of entry to all ocs applications?

Hi,
I have a single node installation of oracle collaboration suite.
The main homepage for the site is as follows:
http://hostname.domain:7779
Now further to this i can access files or mail or search with the folliwing url's:
http://hostname.domain:7779/files/app
http://hostname.domain:7779/um/traffic_cop
http://hostname.domain:7779/files/app/ultrasearch
However once I am logged in, and I try to access each of these urls I alwayshave to login , ie provide a username and password. How can I access all these applications without having to log in again and again??? The user I am using is obiviously one created using the oid from the following url
http://hostname.domain:7778/oiddas
Do i need to configure my ocs user any further? I would appreciate any help on this
Naqi

u have to configer the portal get back to configration hand book and it will work just fine

Similar Messages

How do you get the same skin wrinkles to match all the different Ethnicity?

Hello! this is my first time posting a question in this forum, hopefully there will be some clever people out there who can help me!
I have a wrinkled eye texture (see below)
How do I digitally manipulate it so that i can use this same texture to on top of other photos so that it fits/blends well with people of different ethnic origins?
my aim is to make poeple looking older using the same texture.
So far I've tried:
- Making the texture black and white and use different filters, but it doesnt work on all the different skin colours and it doesnt look real.
- Using Multiply filter after adjusting the original texture - that seems to work well except on people with darker skin, then the wrinkles are just too dark.
I would like to know if anyone knows a simple way where i can make this texture works on all skin colours, with out going in and adjusting the wrinkle texture one by one according to each individual.
hope my question isnt too confusing. any suggestions will be greatly appriciated!!

Here is the texture I've been manipulating all afternoon to try and achieve the looks i want.
and when I put this texture over the top of other images and select Multiply, and adjusted the opacity, this is what i get....
Now this kinda works?? but it still looks not as good on an asian person.
Thanks by the way to everyone for all the tips, I really really appriciate it and more suggestions for improvments are welcome!

How can I get bigger size letters in ribbon and all setting up interface?

Hello everyone! This must be simple but I could not get a clue by myself. New macbook air user. How do you get bigger size letters in ribbon and all setting up interface? Everything is just so small!

Hello and thanks Lousy! Found out web page and docs can be enlarged by trackpad motion control. Other interface can be zoomed+by alt+cmd+8(Spanish keyboard ) thanks for your quick answer. I am dummy new Mac user.

How can you get your submit buttons to be a single click instead of the default double click? (The

How can you get your submit buttons on the quiz template to be a single click instead of the default double click? (The option to choose double click or not is not showing in properties for this).

Hmmm... Submit button doesn't need a double click at all. Maybe you are talking about the two-step process? When you click on Submit, the feedback appears with the message to click anywhere or press Y. Is that what you are talking about? If you are talking about a real double-click, something must be wrong in your file. And which version are you using?
http://blog.lilybiri.com/question-question-slides-in-captivate
Lilybiri

How can you get the schedule of a single reoccurring job with Restart ability in Redwood to pause when it has failed...?

We need the Request Restart ability when scheduling a single reoccurring job in Redwood. Most of our jobs are scheduled in CHAINs which offers the Final Status Handler on Step level, and the schedule is "paused" when a job in the CHAIN has failed ( the next instance does not populate until the OP MSG has been Replied to) , and once the OPERATOR message is replied to, the CHAIN can resume running again ( desired ) . But we need this same ability when scheduling a single job not in a CHAIN. In our testing, we set up a job with Request Restart chosen on the Error , Killed and Unknown selections on the Restart Behavior Tab. But we found when a job is scheduled say once a day at 8AM, and when it fails, an OPERATOR msg appears allowing a Restart choice ( desired), but the next day's schedule also populates ( undesired) and we do NOT want the schedule to continue on yet because we need a chance to fix the error before the next insance runs for business reasons. So how can you get the schedule of a single reoccurring job with Restart ability in Redwood to pause when it has failed...?

Hello Fran,
You can wrap the job chain in a master job chain in the first step and set the final status handler there.
You can also set the Restart Behavior to 'Stop Submit Frame', in that case you will have to resubmit the job once you are finished troubleshooting.
Regards Gerben

What are answer points and how do you get them?

What are answer points and how do you get them?

If you read the Help & Terms of Use over there --->
You will find this and more:
How do I get points for answering questions?
"If you submit a reply to another member's question topic, you are eligible to receive points from that member. The originator has the option of marking a reply as either Helpful or Solved, which will add points to the respondent's account. These points will, in turn, increase a member's ranking (status level) in the community over time."
Regards,
Colin R.

Can you get a power point program for the mac, my daughter has a power point assignment and i am not sure how to do it on the mac

Can you get a power point program for the mac, my daughter has a power point assignment and i am not sure how to do it on the mac

You can use a free alternative like openoffice for this:
http://www.openoffice.org/porting/mac/
or libre office which is a fork of open office:
http://www.libreoffice.org/

How did you get all your points (badges)?

How did you get all your points (badges)?
Was it a hard job?
Or did you already know all the answers by experience so it was easy to help others in sap community forums?
how long did it take to achieve that bronze, silver, gold, platinum star you proudly show now?
Edited by: PadawanGirl on Jul 25, 2011 9:56 PM

Was it a hard job?
Yes in the sense many members who posted the question dont have the basic courtesy of closing their threads with proper comments as to which suggestion has helped them nor do they reward appropriately.
did you already know all the answers by experience
Yes definitely, only with the experience you can guide the members in a right path.
how long did it take to achieve that
Couple of years
thanks
G. Lakshmipathi

How do you get Voice Memos off the iPhone and onto my Mac???

Is this yet another iPhone dead end??
I used the Voice Memo app that comes with the iPhone to record some rehearsals and now I want to move them to my Mac, edit them, make CDs, share online.
I can't find any way to get them off the iPhone, unless I click the "Share" button, which means I can email them. But, it won't let me email the longer ones. I don't know how large the files are, but it just won't do it. I don't see any other facility for moving these files to my Mac. What is up with that???? iTunes provides no access to these files.
Is there some proprietary utility for the Mac that will allow me to access these files and move them to my Mac??? It would be nice if the iPhone would show up as a mounted volume which I could then browse for files, but that would make too much sense and be contrary to the control freak nature of Apple and it's iPhones/iPod Touches. I would call it another lousy user experience, but it's just a user non-experience, a complete dead end.
Is there any way to get these Voice Memo files off of the iPhone besides emailing them??

Thank you for replying!
That kb article refers to the iPod Nano and not the iPhone nor the iPod Touch.
The Synchronizing section you pointed to does not work. I have a big bunch of voice memos on the iPhone. I tried the sync. Three of them were moved to the Mac, the rest were ignored. Four others were moved to iTunes Music/Music/Unknown with numbered names (i had given several of the voice memos names with the Custom label on the iPhone). For the synch I selected "Include voice memos."
After a sync, or several syncs, none of the other voice memos were moved to the Voice Memo playlist, nor are they in the iTunes Music library.
How do you get them to sync? I need to move them off of the iPhone and onto my Mac!

How do you get a line with MULTIPLE fields to WRAP ?

How do you get a line with MULTIPLE fields to WRAP ?
Good afternoon everyone...
THE PROBLEM: Why doesn’t a line with multiple fields WRAP?
HYPOTHETICAL EXAMPLE/WHAT I”D LIKE TO SEE
If I have 2 fields on a line (this is now a hypothetical example and nothing to do with my actual report)….let’s call them field A and field B. And if field A has values of all ‘X’ and field B has values of all ‘Y’…then….the normal case would be (ignore dots – only for spacing):
A……………………… B
XXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYY
But what if A is too long? I would want to see B wrap onto the next line like this:
A……………………………………………………B
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX YYYYYY
YYYYYYYYYYYYY
And similarly….if B is extra long, can the line print as:
A………………………. B
XXXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYYYYYYY
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
I don’t want the case where B is long and I get:
A………………… …B…
XXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYY
………………………..YYYYYYYYYYYYYYYYYYYYY
I can see how you can wrap an individual field like that…but how can you WRAP a line of[b] fields within the frame so it wraps to the BEGINNING of the frame on next line?
My SPECIFIC CASE
I have a report that I have stripped down to a simple structure for the purposes of this explanation.
My DATA MODEL has the main QUERY (for plant family and species data). The columns of the query are divided into 2 groups. The 1st GROUP contains the family data. Below that is the rest of the species data in a 2nd GROUP.
Linking from the 2nd species group (above) is a new QUERY to extract REGION data based on the common key field. Under this 2nd query is another group with all the REGION columns.
The LAYOUT MODEL has a group frame (the main , base one)
On top of this is a repeating frame based on the 1st group (family data).
On top of this is another repeating frame for the 2nd group (species data).
On top of this is 2 Frames on the same line line. The 1st frame contains columns from the species group .
The 2nd frame on this line is a repeating frame. The PRINT DIRECTION for this frame is ACROSS/DOWN. It repeats details of the REGION where the species is found. These columns come from this group come from the REGION QUERY and GROUP.
All fields on the report line have variable horizontal elasticity.
The problem is that when there is too much data on the line, it does NOT WRAP to the 2nd line.. It TRUNCATES.
Can the line be made to WRAP????..
In my current report, 1 of 2 things is happening:
1) All fields print on the line until it hits the page boundary and then it just stops. Truncated!
2) All fields print on the current line, then Oracle Reports throws a new page to print the REMAINDER of the long, input line
But I would like a LONG line to continue printing onto the following line of the same page.
I have tried all combinations of the elasticity fields and the ‘ADVANCED LAYOUT’ properties.
I have been focussing my attention with this problem on the frames .
We are using REPORT BUILDER V 6.0.8.26.0
Thankyou to anyone who may offer assistance.
Tony Calabrese.

Steve,
you gain 1 thing, but you lose something else!
This thing is SO frustrating!
Hey Steve! Good afternoon.
I've done as you suggested....I have a long text boilerplate item - the only 1 on the line...and it has all the column in it.
So it looks like:
&col1 &col2 &col3 &col4 &col5 etc etc etc
And the line expands nicely to each field's requirements.
And when it gets to the right page boundary...it WRAPS to the next line! Beautiful!!!
The only thing is that...when I had individual fields across the line I was able to create format triggers for those fields. And in doing so I was able to reduce the font and change the justification. I had to do that because some of the fields had to appear superscripted.
So I wanted something like (ignore the dots):
...................................ppppp
AAAA BBBB CCCCC DDDD EEEE FFFFFF
So the field of 'ppppp' appeared slightly higher on the line than the other fields...
I can't see how I can do this with a single TEXT field containing all the &COL values.
Have you ever come across anything like this?
Thankyou again,
Tony Calabrese 12/4/2007

How can I get a single jar file with NetBeans?

How can I get a single jar file with NetBeans?
When I create the project I get these files:
dist/lib/libreria1.jar
dist/lib/libreria2.jar
dist/software.jar
The libraries that have been imported to create the project are in separate folders:
libreria1/libreria1.jar
libreria2/libreria2.jar
libreria1, libreria2, dist folders are all located inside the project folder.
I added the following code to the build.xml:
<target name="-post-jar">
<jar jarfile="dist/software.jar">
<zipfileset src="${dist.jar}" excludes="META-INF/*" />
<zipfileset src="dist/lib/libreria1.jar" excludes="META-INF/*" />
<zipfileset src="dist/lib/libreria2.jar" excludes="META-INF/*" />
<manifest>
<attribute name="Main-Class" value="pacco.classeprincipale"/>
</manifest>
</jar>
</target>
Of course there is also the project folder:
src/pacco/classeprincipale.form
src/pacco/classeprincipale.java
Can you tell me what is wrong? The error message I get is as follows:
C:...\build.xml:75: Problem creating jar: archive is not a ZIP archive BUILD FAILED (total time: 2 seconds)

This is not a NetBeans forum, it is a JDeveloper forum. You might want to try http://forums.netbeans.org/. I also saw your other question - try looking in the New to Java forum: New To Java

If you dont have the sim card that came with the iphone and you resync it how do you get it to turn back on .?

if you dont have the sim card that came with the iphone and you resync it how do you get it to turn back on .?

You have been syncing the iPhone with iTunes on your computer without a SIM card inserted in the iPhone for how long?
If the iPhone says connect to computer, this means there is a problem with your iPhone that requires restoring the iPhone with iTunes. As already provided, not having a SIM card inserted in an iPhone does not prevent or shouldn't prevent syncing the iPhone with iTunes. Depending on the iPhone model, it is required in order to restore the iPhone with iTunes.
http://support.apple.com/kb/ht3406
To re-activate an iPhone 3G or iPhone 3GS that displays the "Connect to iTunes" screen:
Insert a SIM card from the carrier with which you used your phone. Note: If you are using the same carrier, you can use the activated SIM card from your new device to do this. If your device is unlocked by your carrier, you can use any SIM card.
Connect the iPhone 3G or iPhone 3GS to iTunes on a computer connected to the Internet.
iTunes will then activate the device. You can remove the SIM card at this point and use the iPhone as if it were an iPod touch.

I can't seem to get rid of OR use Adobe Reader after I let it into Safari 7. How do I get to the point where Reader is not my preferred anything, but can still be used if Preview won't open something?

I can't seem to get rid of OR use Adobe Reader after I let it into Safari 7. How do I get to the point where Reader is not my preferred anything, but can still be used if Preview won't open something?

Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print or save PDF's displayed in Safari, you may be able to do so by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar should appear under the cursor. Click the printer or disk icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
          Safari ▹ Preferences... ▹ Security
and check the box marked
          Allow Plug-ins
Then click
          Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
          Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

How do you get word count to print at the end of a document in Pages?

How do you get word count to print at the end of a document in Pages?

Pages v5 does not provide a user assignable word count variable. With some AppleScript, and a paste operation from the clipboard, you can have locale punctuated word count in this format: 7,803 — anywhere in your document. The following AppleScript works with Pages '09 v4.3 through Pages v5.5.2 on Yosemite.
I would suggest that you copy paste the following AppleScript into your [Apple] Script Editor and save it (suggestion) wordcnt.applescript. Then, follow this with an option+Save As… and this time set the File format to Script Bundle, or Application with hidden extension — saved to your Desktop. Provided you have a Pages document open, you are then a double-click from the ability to paste your current word count into Pages.
Note: If you have Pages word count display enabled, it will automatically count your pasted value as another word which initially may deceive on true word count at the time the script was run.
AppleScript
--- copy below this line ---
property locale : "en_US.UTF-8" -- In Terminal, use the locale command to see yours
if not ApplicationIsRunning("Pages") then
     display dialog "Pages must be running to use this utility."
     return quit
end if
tell application "Pages"
    tell body text of front document
        set wordCnt to count words
        -- Don't want punctuated numbers? Remove the single quote from printf format
        set the clipboard to (do shell script "export LC_ALL=" & locale & "; printf \"%'d\" " & wordCnt)
    end tell
end tell
on ApplicationIsRunning(appName)
     tell application "System Events" to set appNameIsRunning to exists (processes where name is appName)
     return appNameIsRunning
end ApplicationIsRunning

How do you get DHCP to work through a controller?

I thought I asked this question in the past...
If you add a controller to an external network in a soho environment, how do you get the controller to pass DHCP requests through it. In order to get it to work, I have to set up a DHCP scope in the controller, which is not what I want to do. I want to use the existing DHCP service. The controller doesn't seem to want to send the requests through.

"Also of you use ISE with the dhcp probe for finger printing, you need to disable it .."
I'm dealing with this exact issue now. You can't simply put ISE in as a secondary DHCP server for the WLAN because it doesn't unicast to BOTH primary and secondary server addresses.
So you're left disabling dhcp proxy and using helper addresses on VLAN SVI's, which is fine if you want *ALL* of your WLANs to use an external DHCP server. In this case we'd like the Guest users to get DHCP addresses from the WLC (they get tunneled to a mobility anchor in a DMZ where there is no DHCP server) and the regular users to use the SVI helper addresses so that the DHCP packets can also be sent to ISE for proper profiling.
I guess we're kind of stuck with it and may have to get the customer to stand up a DHCP server in their DMZ, I see no other way around it at this point.

How do you get a single point of entry to all ocs applications?

Similar Messages

Maybe you are looking for