How do you set the menu button for a playlist?

I have a "Play All" playlist that I want to return to the main menu (when the menu button on a DVD remote is pressed). Right now, it's going to one of my sub menus. I can't figure out why this is happening. Any help would be greatly appreciated.

Thanks for the responses.
My "Play All" playlist is not a button on a menu. It is actually the "First Play" of my DVD. I want the user to be able to hit the menu on their remote and then go to the main menu. What's happening is the menu button is going to a sub menu. I find it frustrating that you cannot set the remote button options for a playlist. If this can't be done, is there at least a way to set my main menu screen as my "top menu"? I don't want to set all of my timelines to the main menu. If I were to set it that way, all of the clips from the sub menus would go back to the main menu (when the menu remote button is pressed).

Similar Messages

How do you set the font color for a specific entire row inside a JTable?

How do you set the font color for a specific entire row inside a JTable?
I want to change the font color for only a couple of rows inside a JTable.
I've seen some ways to possibly do this with an individual cell.
Clarification on changing the font color in an individual cell would be helpful too if
there is no easy way to do this for a row.

hai,
Try out with this piece of code.Create your table and assign the renderer to each column in the table.
CellColorRenderer m_CellColorRenderer = new CellColorRenderer();
for(int i=0;i<your_JTable.getColumnCount();i++)
your_JTable.getColumnModel().getColumn(i).setCellRenderer(m_CellColorRenderer);
class CellColorRenderer extends JLabel implements TableCellRenderer
CellColorRenderer()
setOpaque(true);
setHorizontalAlignment(LEFT);
setVerticalAlignment(CENTER);
setBackground(Color.white);
setForeground(Color.black);
protected void setValue(Object value)
     setText((value == null) ? "" : value.toString());
public Component getTableCellRendererComponent(JTable table,Object value,boolean isSelected, boolean hasFocus, int row,int column)
     if(isSelected == true)
          setForeground(Color.red);
     else
          setForeground(Color.black);
     setValue(value);
     return this;
regards,
bala

How do you set the default magnification for Acrobat. All documents that I open enlarge to 174% and are too big.

How do you set the default magnification for Acrobat. All documents that I open enlarge to 174% and are too big. I see how to change the size after the document is open by going to File/properties/initial view and saving this setting. I want all documents to open at 100% when they are first opened. Can I set this as a default view?

Hey Kris,
You might go to Edit> Preferences> Zoom
Do this without opening any particular PDF so that it applies to the program itself and not just one document.
Try this and then let me know.
Regards,
Anubha

How can you set the max row for a 'open cursor' in a stored proc?

I would like to know how can you set the maximum amount of row returned in a resultset coming from a stored proc?
You can do it via JDBC with cStatement.setMaxRows(10); but it works only for select that you do via JDBC...
I would like the same functionality using open cursor inside a stored proc...
Thanks...

is "where ROWNUM <= 10" the equivalent of "cStatement.setMaxRows(10);" because the ROWNUM as problem with the ORDER BY clause and the setMaxRows() as no problem...

How do you set the home page for firefox for android?

I have firefox installed on my tablet. How do i set the home page or start page?

Hello lalbrecht5, see: https://support.mozilla.org/en-US/questions/953363
thank you

How do I remove the menu button? The Customize option doesn't seem to work for that.

How do I remove the menu button? [That IChing looking three line icon on the toolbar.]
The toolbar Customize option doesn't seem to work, and it seems a waste to have a button that duplicates the menus. I'd like to swap it out for the NoScript icon.

Hi, ''I can't recommend that you do it'', but If you really are determined, [http://www.tweakguides.com/Firefox_12.html this article] may help.

How do you set the duration for multiple stills in iMovie 2013?

How do you set the duration for multiple stills in iMovie 2013?
Before upgrading to the latest version of iMovie last month, I was able to set the duation of all of the stills included in an iMovie project at one time by clicking the apply to all still box in the adjustment pop up. That option is no longer apparent. If it is available I cannot find it, and I have tried several different ways to accomplish it. I have tried the iMovie help section and can find nothing to help.
Apple, do I really have to adjust close to 500 pictures to a 5 second duration individually???
REALLY??!!

...why wouldnt people want that level of accuracy when animating, especially when working to music at a specific duration?
Because often people are animating to words or beats in the music. Music is rarely performed with a computer-precise beat and tempo. Musicians aren't robots: they swing the beat sometimes. They use rubato. They change tempo. They change time signatures. As a result, you have to FIND those words and beats. It's not a situation where you can say, "There! I've found the duration of one beat! Now it's easy to find the rest of them!"
If you try it, you will be very disappointed.
Try finding the precise end of a piece of music that fades or ends on a big chord with a ring-out. You'll see that it's trial-and-error: what's the point where it becomes inaudible? It depends on how high your speakers are turned up. You might have them way up, you set an end point for the layer, and then you do a RAM Preview at a more reasonable volume. You might say, "Hey! The music ends before the layer ends!"... but you KNOW you set the layer's out point when the audio file goes silent.
AE has layer markers that can be used on an audio layer to mark beats, words, etc. They come in very handy.
I guess it comes down to this: because AE can do so much different stuff, there are very few automated procedures. Oh, Adobe tries with effects that convert audio levels to keyframes, but they're not 100% reliable... especially on something like a capella choral works. For true accuracy, you need find the timings yourself.
If you want something simpler, try a different application. But be prepared for lower level of accuracy.

How do you set the zoom level to Inherit Zoom for all bookmarks in a pdf?

How do you set the zoom level to Inherit Zoom for all bookmarks in a pdf?

beatngu13
I made an account just to "like" your comment and say that you are a god among men.
I've been searching for hours about how to make the zoom level persistent throughout following links in various PDF's I have, and most sources were saying to just buy acrobat pro and edit the bookmarks manually with it.
I saw that it was possible to write an application to change the property, and considered doing it after the only pre-existing custom application I could find was asking for $50.
Thanks to you, I no longer have to worry about re-zooming every time I click a bookmark, and I'm not out $50 or the time it would take to code an app myself!
From the bottom of my heart, thank you!

How do you set the time for this forum??? Not in nerd pleas

how do you set the time for this forum?

There were problems with the correct time display for postings, and based on another recent post this doesn't seem to have been fixed. My advice... don't worry about it.

How do you set up Port Forwarding for ARD 2.2 in AEB N?

Help,
I'm a novice at Apple Remote Desktop (ARD) - not an IT guy, so it has to be pretty basic and detailed.
How do you set up Port Forwarding for ARD 2.2 on the Apple Airport Extreme BS router, 802.11 N. I have one at each end of the internet connection. At one end I have an Airport Extreme N router with 2 macs and eventually 1 windows XP machine (if I can) that I would like to be able to connect to over the interenet (the clients) and at the other end, I have a Mac with ARD 2.2 installed also with an Airport Extreme N router. Note: Both routers use Static IP addresses and all computers use static IP's internally not through DHCP. What are the settings or directions to do this.
I have read and printed out the directions for Configuration of ARD 3.0 that are posted many times in the ARD discusion group, but it uses a Linksys router ( http://www.starkpr.com/ard.htm posted by Dave Sawyer). The Mac router is different, particularly with the place to set a Private IP address. I'm not sure about alot of things, but especially about the Private IP address, what number do I set it to, the one that is in my Network connections list? It automatically changes to a different number in AE N setup for Port Forwarding (by one) as if it is not suppose to the same?????
Are there any directions available that are as straight forward for the Airport Extreme N router, as the one's that are listed here for the Linksys Router's? ( http://www.starkpr.com/ard.htm )
Any and All help will be greatly appreciated.
P.S. I know I should have 3.0 but bought 2.2 just weeks before 3.0 came out and they would not give me an upgrade price, so I'm waiting for 4.0 to upgrade.
Thanks,
Jim

Try the following for each AirPort Extreme ...
AEBSn - Port Mapping Setup
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): 3283
o Public TCP Port(s): 3283
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s): 3283
o Private TCP Port(s): 3283
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5900
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5900
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5988
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5988
o Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products)

How do I set the aspect ration for 4:3 or for 16:9?

How do I set the aspect ration for 4:3 or for 16:9 in Adobe PE12?

PulcinellaNM
What computer operating system is your Premiere Elements 12 running on? Have you updated from 12 to 12.1 Update via a project's Help Menu/Update? If not, please do so. That is all background information for now.
As for the question that you are posting....
I think we need to go a lot deeper into what you are doing. Here are some considerations
The aspect ratio setting is in the import settings. In Premiere Elements 12 Expert workspace, the project automatically sets the project preset based on the properties of the first video file that you drag to the Expert workspace Timeline. If your video's properties include a 16:9 flag, then the project settings will have a 16:9 flag (aspect ratio). If you do not want the project to set the project settings automatically, you can set the project settings yourself manually with File Menu/New/Project and then import your source video.
If a problem exists where imported 16:9 video is presenting in Premiere Elements as 4:3 instead of 16:9 (typical of the JVC .mod file issue), then you can set the pixel aspect ratio under Interpret Footage feature inside the project workspace.
At this point, I think it best for you to give more details and background behind your question so that we can be sure that we are giving you the information that you need to succeed in your projects.
If you need clarification on anything written, please do not hesitate to ask for clarification.
Thank you.
ATR

How do you set up nested rules for iTunes smart playlist

How do you set up nested rules for a iTune smart playlist

Hello \"alice\",
It sounds like you want to add additional criteria to your Smart Playlists. I found an article with steps you can use to refine your Smart Playlist. Step 2 specifically has what I think you are looking for:
2. To have iTunes add songs that match specific criteria, make sure to select "Match the following rule," then make your selections from the pop-up menus.
For example, you might want iTunes to only add songs that are by a particular artist, or songs with at least a four-star rating.
To add additional matching criteria, click the Add button.
You can find the full article here:
iTunes: How to create a Smart Playlist
http://support.apple.com/kb/ht1801
The article says it is archived. In the current version of iTunes, in step 1 you will select File>New>Smart Playlist. Also, if you need to edit an existing Smart Playlist, you can right click (or hold command while you click) on it and select Edit Smart Playlist.
Thank you for using Apple Support Communities.
Best,
Sheila M.

How do I set the home page for a new tab?

How do I set the web page for when I open a new tab? Whenever I open a new tab it goes to an error site which freezes my firefox browser for a while. How do I change that? I want to open new tabs with google being the home page. I need to set up the homepage for a new tab NOT a new window. Please help! !

If Google is set as your Homepage in Firefox you can middle-click ''(push down on the mouse wheel)'' to open Google in a new Tab.
Or, you can add the feature to Firefox where clicking the New Tab button on the Tab Bar opens your Homepage in a new Tab. <br />
https://addons.mozilla.org/en-US/firefox/addon/new-tab-homepage/
And if you have a different Homepage set, this extension allows for any page you set in the extension's options to open when you use the new Tab button. <br />
https://addons.mozilla.org/en-US/firefox/addon/newtaburl/

How do I set the Submit button to send the information directly to a specific email address?

How do I set the Submit button to send the information directly to a specific outside email address? It isn't clear to me where or how it says that you can do this.

Is this for a web form or a PDF? If PDF, you would have to use Acrobat to edit the form and replace the submit button action with either a "Submit a form" action using a mailto type URL, or use the doc.submitForm statement to do the same.

How can i set the alternating colors for a table rows

Dear All,
Please any one help me how can i set the Alternating colors for Table Rows.
i created a theam there i set the background alternating color to brown and i set the table design properity to alternating. but it is not reflecting.

Hi,
The design property in Table properties should work for your requirement. Select "alternating" value for design.
Please see the API below:
design
Determines the appearance of the table. The property design can take the following values and is represented by enumeration type WDTableDesign.
alternating - The table rows are displayed alternately in a different color.
standard - The table background has one color. The individual table rows are displayed with grid net lines.
transparent - The table background is transparent. The individual table rows are displayed without grid net lines.
Check whether you have changed the right property or not? Also table should contain more than one rows to test this scenario.
Regards,
Jaya.
Edited by: VJR on Jun 17, 2009 6:43 PM

How do you set the menu button for a playlist?

Similar Messages

Maybe you are looking for