How does DIAdem keep track of which version is active when multiple versions are installed?

I need a way to find out which version of DIAdem is active, without creating an automation reference. How does DIAdem keep track of this? I don't think it's through the registry as far as I can tell. Thanks.

Hi,
I'm not quite sure what you mean by "version of DIAdem is active". If you are trying to reference DIAdem from an external program, you will need to use an automation reference. Besides this case, I am not sure what you are referring to.
Perhaps a short description of your application or intended use will help me point you in the right direction.
Allen P.
National Instruments

Similar Messages

  • My computer says I cannot use icloud because I have multiple versions of outlook installed. How do I find out which versions are installed and how do I decide which one to delete?

    My computer states that I have multiple versions of outlook installed and that i cannot use icloud. How d if find out which versions are installed and which ne to delete without interrupting the other?

    That's a Windows/Office problem. You should ask in the Microsoft support forums.

  • How can I keep track of which users use which machines

    Hello!
    I'm notice that we have one machine in our labs that is constantly getting the keyboard damaged by one of the students. We use an Open Directory system to allow the students to log into any available machine, but how can I log which users are using that particular machine??
    Thanks!

    hi,
    try "last" in the client's terminal. is this what you are looking for?
    cheers,
    Michael.

  • How does firefox keep track of sites visited

    When I go the page info tab while on the google home page I notice that it shows the number of times I have visited the web page even though I have cleared all cookies AND flash cookies! Where/Why is this information stored?
    == This happened ==
    Every time Firefox opened
    == Always

    The history, along with your bookmarks, is stored in a file called places.sqlite, which includes the date and time you last visited the site and how many times you have visited the site. The details are used by the location bar as shown in the [[location bar autocomplete]] article.
    If you do not want it to remember the history details, you can change the settings in the [[Options window - Privacy panel]]

  • How does Thunderbird keep track of where it stores your messages?

    I am writing a program to isolate certain messages from a messages file. Of course I can hard code the path where the messages are kept at the moment, but when the user changes it, my program will be lost.
    I have looked in the registry and profile.ini file with no luck. Anyone knows the answer? Thanks.

    The path to messages in Thunderbird is random just for the reason your having trouble. To make programmatic access non trivial.
    As you would have observed the profiles.ini contains a path the the root of the profile.
    Within the profile mail is stores in profiles\imapmail for IMAP or profiles\mail for pop
    Sub folders exist for the server the mail is for, often with a numeric suffix to separate multiple accounts on the same server, or multiple attempts to set up the same account.
    These folder can again contain sub folder. depending on the internal structure of folders within Thunderbird.
    If the user has specified a custom location for the folder of an account, that information is stored in the prefs.js file along with all other preferences. The account the setting is for is referenced numerically. So you need to establish from the preferences what the account number is, before reading the preference for location.

  • How to keep track of which checkboxes are checked

    I have 21 checkboxes on a scene and want a user to have to
    pick at least four of them, i will then use the ticked checkboxes
    to bring data back from a database. My question is how do i keep
    track of which checkboxes are clicked so i can put them in to a sql
    statement like this?
    select * from table where title in (checkbox1, checkbox2,
    checbox13);
    And how do i make sure the user has picked four boxes before
    being allowed to leave the current frame?
    EDIT: sorry this is probably in the wrong forum it should go
    under basics, but instead of posting the thread there can someone
    please reply to it here, thank you.

    i am using flash component checkboxes, i tried to come up
    with my own way to do this i am doing different:
    on CheckBoxState -- name of custom handler
    TickedBoxes = [] -- a empty list will be filled where ever a
    checkbox is ticked
    CheckBoxNames = ["dr no", "from russia","goldfinger",
    "thunderball", "you only live" ]
    -- the above is a list containing the names of all my
    checkboxes
    repeat with i = 1 to 5 - repeat for each checkbox
    CurrentCheckbox = CheckBoxNames
    -- used to keep track of which box is checked this sets
    currentcheckbox to value of i, i is a checkbox from checkboxname
    list
    if the hilite of member(CurrentCheckbox) then -- if
    currentcheckbox hilite is true (checked)...
    append(TickedBoxes, CurrentCheckbox) -- ... add
    currentcheckbox to the tickedboxes list
    end if
    end repeat -- end repeat
    return TickedBoxes -- return the list of checked boxes
    end
    on mouseUp me -- on mouse click
    choosenBoxes = me.CheckBoxState() -- chosenboxes is a
    variable calls the handler on it
    -- will put sql here
    end
    this is the only script i have which is attahced to my
    submit button, but for some reason when i try to trace the results
    in the message window it always return void can anybody tell me
    what i am doing wrong?

  • How does DIADEM import TDMS files? How gets every channel his number and groupindex? How can I determine which channel has which groupindex and number?

    I store different channels in a TDMS file.
    I like to have a time channel at the first position with group index 1 and number 1.
    When I read the TDMS file with DIADEM the time channel (Float64) is on a differernt position, and the channels are not sorted alphabetically.
    Here are my questions:
    How does DIADEM import TDMS files?
    How gets every channel his number and groupindex?
    How can I determine which channel has which groupindex and number?
    Best regards
    Joerg

    Hi Jörg,
    i suppose that you´re programme whose create the *.tdms file is writing on false position. Try to create datas with timechannel on first indes in diadem, then save it and then open it again. you see that all is correct. So please tell me what programm in what version do you use and please attache it here.
    Did you use the library for creating *.tdms files like in the link ?
    http://zone.ni.com/devzone/cda/tut/p/id/6471
    Here you find the gtdms_8.x.zip - when you extract it and opened the *.llb you find vi´s for all functions e.g. writing 2d array of strings to *.tdms file
    when you open the subvi´s then you see how created and writing datas/structure to *.tdms files. Because *.tdms is binary you can´t see structure with open it in editor.
    When you don´t have Labview you can use the 30 days test of current version 8.5 under following link
    german version download link
    https://lumen.ni.com/nicif/d/lveval/content.xhtml
    english version download link
    https://lumen.ni.com/nicif/us/lveval/content.xhtml
    Hope it helps
    Best Regards

  • How to keep track of which tab is currently active in the page using Session object?

    Hi,
    Just curious as to whether it is possible to have a PL/SQL event fire on an active tab.
    The reason is I want to keep track of which tab is currently active on the page is that I have "generic" forms and reports published as portlets that I wish to be able to determine from the session object what page/tab the user is coming from and apply certain restrictions etc.
    kind regards,
    Matt.
    null

    Hi Konstantina,
    Yes You can do like that 2012-->q1-->January
    Steps:
    1. Create time dimension hierarchy as by following like Total--> year--> Quarter--> Month--> if you need you can keep Description.
    2. Drag the Year column from period dimension table to the dimension hierarchy of year.
    3. Drag the quarter column from period dimension table to the dimension hierarchy of Quarter.
    4. Drag the month column from period dimension table to the dimension hierarchy of month.
    5. Drag the hierarchy to period dimension table in presentation layer.
    In Answer side keep as it as Default: drill in primary and secondary interaction under column properties.
    For more refer : http://mkashu.blogspot.com
    Regards
    VG

  • Why do my songs and audio books keep getting erased when I add a new book?  Now some books will not play and the iPod does not keep track of where I was when I pause a book, leave for music and then go back!

    About a month ago I added some new audio books to my iPod Classic and then after disconnecting, I discovered EVERYTHING had been erased. 
    I had to restore through my iTunes but then I could not load my music back on.
    I uninstalled / reinstalled iTunes and completely reformated the iPod drive.
    I successfully got my music and books back on but then added a new book two days ago only to discover everything got erased AGAIN!!!
    Of course, my 1 Year Warranty was up about a week before the first incident.....
    I formatted the iPod again, uninstalled / reinstalled iTunes (it was freezing during sync) and downloaded all my music and books again.
    Now I have several books that will not play (they play on iTunes and they played on the iPod before all these events) and the iPod does not keep track of where I was in a book when I have to stop and go to something else.
    Does anyone know what is going on with this thing???  I have a 5th Gen Video and in all the years I've had it, I've NEVER had problems like this! 
    Does anyone have any ideas on what I can do to get my iPod Classic up and running properly again?
    Thanks.

    When iTunes/iPod sync process failed due to timeout, the iPod, has only the initilaised  filesytem structure at the start of the Sync.
    The timeout failure could be due to
    Bad hardisk - do the iPod disk diagnostic, refer to this excellent post by tt2
    Slow USB port or resource - Dont use any USB hub, disconnect all other USB devices while syncing
    Timeout due to Antivirus or other plugins - disconnect from Internet and stop the Antivirus or monitoribng software if you are syncing.
    Preferably stop doing other things while syncing this ancient device, which the latest iTunes designer, think will soon be extinct.
    Have a nice day!

  • How does one keep the Creative Cloud purchase/signup popup from popping up everytime I flash up Dream Weaver CS6?

    How does one keep the Creative Cloud purchase/signup popup from popping up every time I flash up Dream Weaver CS6?

    Johnnyontherocks it is likely you installed an updated version of the Adobe Application Manager.  Remove all copies of Adobe Creative software from the computer and reinstall to downgrade the installation.

  • Where is the file that keeps track of which mail items were open?

    Searching for the file that keeps track of which mail items were open- sometimes it suddenly is shorter, forgets some of the items of mail that was open, in my 'in box' as it were.
    just happened to me- 15 emails I wanted to keep open till I answered them are now lost back in the mail stack
    any idea where i can find that, retrieve from a backup done last week?
    any trick to fixing this problem?
    hope so
    i gotta track down some of those emails, will be a huge chore to do it one by one
    thanks

    any idea where i can find that, retrieve from a backup done last week?
    Good luck with that; it's not likely to happen.
    any trick to fixing this problem?
    You could just reply to the email right away, rather than putting it off until later, whenever "later" happens to be. Or, you could also put your emails that have not yet been replied to in a separate folder, and move them out into your Inbox when you have replied.
    Mulder

  • How can I keep track of ans of quest ???? [Struts]

    hi,
    I am trying to develop Question-Answer pages using struts.
    The problem is when user selectes the right option(radio button) of different different quest. how can i keep track of these selected radio buttons ???
    I mean how can i trace the value of selected radio button corresponding to its quest. in my ActionForm and ActionClass.
    //loop for all questions
    <logic:notEmpty name="QUEST_LIST">
         <logic:iterate id="list" name="QUEST_LIST"  indexId="sno">     
         <tr>
              <td><%=(sno.intValue()+1) %>
              </td>
              <td> <bean:write name="list" property="QUESTION" />
              </td>               
         </tr>
         <tr>//loop for all options of corresponding question
    <logic:iterate id="OptionList" name="list" property="OPTION_LIST">
              <td> 
              </td>
              <td><INPUT type="radio" name="<bean:write name="list" property="QUESTION_ID" />" value="<bean:write name="OptionList" />">
                   <bean:write name="OptionList" />
              </td>
              </logic:iterate>
         </tr>     
         <tr><td> </td>
         </tr>
         </logic:iterate>
    </logic:notEmpty>Now my problem is in statement.....
    INPUT type="radio" name="<bean:write name="list" property="QUESTION_ID" />" value="<bean:write name="OptionList" />">
    if I hardcode the valueof "name" attribute then only one radio button is selected from all the question, so i created it dynamically using quesID.
    now its working fine only one radio can be selected for each quest. BUT how I set the values of these selected radio button in my ActionForm and get it into ActionClass
    I hope u understand what i am trying to say.....
    Please help me......

    hi,
    try "last" in the client's terminal. is this what you are looking for?
    cheers,
    Michael.

  • How do I keep track of dialog boxes?

    If I have a three question test, How do I keep track of the answers?

    OK a bit of sanity.
    you have a 3 question test.
    presumably you have a 3 element array of questions (Strings?)
    String[] questions = {"What is 1 + 1","What is 2 + 2","What is 3 + 3"};
    in a loop you ask each question, then get the response to each.
    String answer = .....readLine();
    if you change this to an object
    class Question
      String question;
      String answer;
      public Question (String q){question = q;}
    }then your array looks like this
    Question[] questions = {new Question("What is 1 + 1"), etc
    so now the display of the question changes from
    System.out.print(questions[x]);
    to
    System.out.print(questions[x].question);
    likewise for the answer
    from
    String answer = .....readLine();
    to
    questions[x].answer = .....readLine();
    now, in your Question array, each 'question' stores the answer received

  • How do I keep track of stats and subscriptions of my podcast? Mine was just added today.

    My podcast, The Big Seance Podcast, was just added to iTunes today. Other than keeping track of stats through my host (Libsyn), how can I keep track of subscriptions, ratings, and downloads through itunes? Thanks!

    Hi Patrick,
    You will not get any stats from Apple / iTunes.  You need to get that info from your libsyn account.
    If you want to see the number of people consuming via iTunes or the Podcasts App (AppleCoreMedia) - you will need to have the advanced stats - App 400 or greater level account in Libsyn.
    That is the only way to get the info you are looking for.
    Regards,
    Rob W

  • How does one keep the photo description attached to a photo in iphoto when that photo copies to a disc or flash drive

    how does one keep the photo description attached to a photo in iphoto when that photo copies to a disc or flash drive?
    the metadata transfers ok, it is the description of that photo that does not transfer.

    Use the File -> Export command and note the settings to write the metadata to the file on export.
    This User Tip
    https://discussions.apple.com/docs/DOC-4921
    has details of the options in the Export dialogue.

Maybe you are looking for