How does one create the Process List (AdminUI) with the provided SDK API?

Currently we are developing a custom component for Adobe LiveCycle, which should offer the following service operation:
Fetch a list of schedulers (= long-lived processes with that loop with a Wait-operation) and check whether there are instances running for them
Input: none
Output: A list of (long-lived) process definitions together with a list of (running) process instances in XMLXML format could look like:
<processes>
     <process>
          <name>Mortage/Util/Scheduler A</name>
          <application>Mortage</application>
          <status>Active</status>
          <creationDate>2015-03-25T13:00</creationDate>
          <processInstances>
               <processInstance>
                    <id>12314</id>
                    <status>RUNNING</status>
                    <createdOn>2015-03-25T13:01</createdOn>
                    <modifiedOn>2015-03-25T13:02</modifiedOn>
                    <operations>
                         <operation>
                              <name>Set Value X</name>
                              <status>COMPLETE</status>
                              <createdOn>2015-03-25T13:01</createdOn>
                              <completedOn>2015-03-25T13:01</completedOn>
                         </operation>
                         <operation>
                              <name>Set Value X</name>
                              <status>STALLED</status>
                              <createdOn>2015-03-25T13:02</createdOn>
                              <completedOn>2015-03-25T13:02</completedOn>
                         </operation>
                    </operations>
               </processInstance>
               <processInstance>
                    <id>12315</id>
                    <status>RUNNING</status>
                    <createdOn>2015-03-25T13:02</createdOn>
                    <modifiedOn>2015-03-25T13:02</modifiedOn>
                    <operations>
                         <operation>
                              <name>Set Value X</name>
                              <status>COMPLETE</status>
                              <createdOn>2015-03-25T13:02</createdOn>
                              <completedOn>2015-03-25T13:02</completedOn>
                         </operation>
                         <operation>
                              <name>Set Value X</name>
                              <status>RUNNING</status>
                              <createdOn>2015-03-25T13:02</createdOn>
                              <completedOn></completedOn>
                         </operation>
                    </operations>
               </processInstance>
          </processInstances>
     </process>
     <process>
          <name>Mortage/Util/Scheduler B</name>
          <application>Mortage</application>
          <status>Active</status>
          <creationDate>2015-03-25T13:00</creationDate>
          <processInstances/>
     </process>
</processes>
Though I'm unable to retrieve these kind of processes, since the SDK API does not offer a way to fetch these kind of processes.
I tried the following Quick Start: http://help.adobe.com/en_US/livecycle/10.0/ProgramLC/WS624e3cba99b79e12e69a9941333732bac8- 7d27.html
Quick Start (EJB mode): Searching for Process Instances using the Java API
(and yes I went through all the possible options (other Quick Starts, API documentation))

Yes, removing the block diagram obscures the code so much that not even newer versions of LabVIEW can make sense of it.
I think under the hood it must be converting it to Perl.
Spoiler (Highlight to read)
If you believe this and have lots of money please contact me with your credit card info
If you believe this and have lots of money please contact me with your credit card info
=====================
LabVIEW 2012

Similar Messages

In iTunes 11 how does one create a gapless CD transition if the CD is already in the library. The gapless playback option is not where it was located in the last version.

I have a large itunes library that I use with Pure music. In the past, I was tagging CDs imported as gapless after the fact. Primarily it tool me a while to learn that I needed to do this for best playback from memory. in iTunes 11, I can see how to join CDs on input but not how to join songs of a CD that is already loaded. Any Ideas?

MartinR wrote:
Changing the drive alone, even if you give the drive the sam name as the previous drive, won't solve it. The mere fact that you moved the folders/files to a new drive makes it a different location. You have to reconnect the media after moving the location.
Not Quite. As an experiment, I created a series of folders on a clean target drive with the same names as on the source drive, then drag-copied the media files for a given project into those folders. I did this with 2 FCE projects and both opened on the new hard drive without the need to re-connect the media. In this case, all of the media was located in a folder at the root level of the drive. Apparently, the FCE application begins its search at the root level and seems to work even though the names of the 2 drives are different.
I may not be as fortunate transferring projects from other hard drives because the directory paths for media will not be the same. Anyway, it worked for this particular case and will save me some time and effort.

How does one goes on building an Icon with the 'Look and Feel' of an Icon?

Hello everybody, I work as a Graphic Designer for a company that is asking me to create an Icon for a software that we own, I am having trouble as to how do i go building one, I use Illustrator and Photoshop but I am not sure how to give the Icon the 'Look and Feel' of an Icon, the colors look a bit different and so the 'texture' of my vector image. If anyone can explain me or point me to a good website that explains how should I go on building an icon so it looks like an Icon that will be great. I thank you in advance for any reply that you can give me regarding the subject.

don't know what you mean by "look and fell of an icon". You could go to vectortuts.com - it has lots of tutorials on the creation of different icons. Also check hicksdesign.co.uk for their presentations on icon concepts

How does one create folders?

How does one create folders?

Select Documents at the left. Click the Edit button (upper right). Click the New Folder icon at the top.

How does one create a "check box" in a cell?

How does one create a "check box" in a cell?

select the cell then open the cell formatter:
process should be similar in the iOS version. I do not have any iOS devices with Numbers so I cannot check. I did find this link that may help:
http://support.apple.com/kb/PH3374?viewlocale=en_US

How does one create their own interpolation

I am currently working on a tile-based environment in which the user controls a tank. I have been attempting to use interpolators to smooth out the movement between tiles, but I have had a lot of trouble acheiving the desired effects. From what I have gathered from various posts is that the interpolator classes are only useful for repeating animations (please correct me if this statement is wrong).
My question then is:
How does one create their own or methods which simulates the interpolation behavior; I am particularly interested in the PositionInterpolator for translating the missles fired by the tank.
I attempted to do this several times, but I have failed. Here is one of my attempts:
public void fire()
     show(); //show the missle geometry
     int TRANSLATION_TIME = 1000; //blast alive for 5 seconds
     float DISTANCE = 20.0f; //missle travels a distance of 20 units
     //interpolate path
     long startTime = System.currentTimeMillis();
     long endTime = startTime +TRANSLATION_TIME;
     long interval = endTime - startTime;
     float translationPercent;
     float lastTransPercent = 0;
     float dist;
     Transform3D translate = new Transform3D();
     while(System.currentTimeMillis() < endTime && !collision)
     interval = System.currentTimeMillis() - startTime;
     translationPercent = (float)interval/TRANSLATION_TIME;
     dist = DISTANCE*(translationPercent - lastTransPercent);
     lastTransPercent = translationPercent;
     translate.setTranslation(new Vector3f(0.0f, 0.0f, -dist));
     interpolate(translate);
public void interpolate(Transform3D translate)
     Transform3D t3d = new Transform3D();
     missleTG.getTransform(t3d);
     t3d.mul(translate);
     missleTG.setTransform(t3d);
What happens using this code is that the missle just waits at its initial location until the TRANSLATION_TIME has passed, and then jumps to the final position -- the missle does not smoothly translate to the final location. Are there any explainations out there for this behaviors.
-Thanks in advance

Hi,
I'm also working on a game environment where the user can move around in a spaceship and fire missiles etc...
I haven't looked much at interpolators, but I use Behaviors for everything I need to move/rotate/scale...
You can for example create your own behavior (by extending the Behavior class) and set it up to move the missile when you press a specific key, or when any other kind of event takes place...
You should check the documentation for the Behavior class.
Hope this helps...

How does one transfer CS5 actions for use with CS6?

CS6 installation, which was uneventful, has transferred none of my actions from my copy of CS5. The CS5 actions are located in the actions folder of the APPLICATION/PHOTOSHOP CS5/PRESETS/ACTIONS. The "actions" folder in application support/adobe in my library is empty, and has always been so.
Only the CS6 default actions are located in the same folder for CS6.
I use imac i7, lion.
Note that i also have CS3 and CS4 on my machine. This due to recent upgrade to CS5 and recent upgrade to LION, and my general paranoia.
Must i load each action into CS6, one at a time?
thanks to any and all.
vince

Re: how does one transfer CS5 actions for use with CS6?
On a Mac - There are multiple ways to do this. I have done them both ways. In order to do this you need to know where you have your actions stored, and you can move them all at once if you have them stored in the same location.
1. You can load an action ONE AT TIME into your actions palette by:
     A. Open up the action palette and click on the little arrow with 4 little horizontal lines next to it on the upper right corner of the actions palette.
     B. Select "Load Actions" and a Finder window will open up and you can search your computer through this window for your actions.
     C. Click on the action from the Finder window then click 'Open' at the bottom right of the finder window.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens- click on 'Save Actions'. It will select the location where the          actions are currently stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
2. TO MOVE MULTIPLE ACTION SETS AT ONCE
     A. Open up CS6 (or CS5) and move the Photoshop workspace it to the right side of your computer screen so you can see your desktop on the left side.
     B. Open up your Finder search window from your dock (the square blue head icon thingy for those who are new to photoshop). Move this to the left side of your screen so you can see the Photoshop work space on the right and the Finder window          on the left. In the Finder window, navigate to the file where all your actions are stored, select all the actions in the file (command+A will select everything in the file if you are actively inside the open file) or you can select multiple files           individually by continuously holding down the command key and clicking on the different actions you want to move.
     C. With the Photoshop workspace visible on the right, and the actions palette open so you can see that the actions actually transferred - In the Finder window, click the selected actions you want to load and drag them over to the Photoshop           workspace. I did this without an image open, I just dragged them onto the empty workspace. The actions should all appear immediately in the actions palette that is open.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens click on 'Save Actions'. It will select the location where the           actions are stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
I hope this helps.
and I hope there are no typos.

How does one create a form that redirects based on the input of the form?

What I am trying to do is have a form with one input. Lets call it "ID".
There are multiple pages that the form can direct to depending on the ID the user inputs.
All of the page extentions end with the ID. For example www.page.com/0001.html.
So I want the user to put in "0001" then submit. The user will then be directed to page www.page.com/0001 if they put in an invalid ID user will be directed to "ID not found" page.
Any help would be much apreciated!! Thanks.

on form.php put a form like this:
<form method="POST" action="redirect.php">
<input type="text" name="id" value="" /><br />
<input type="submit" value="redirect" />
</form>
on redirect.php put this:
<?php
if (isset($_POST['id'])) {
     header ('Location: http://yoursite.com/'.$_POST['id'].'html');
     exit;
}else{
     header ('Location: http://yoursite.com/form.php');
     exit;
?>
best,
Shocker

How does one create LOV Map between 2 fields for custom lookup mapping

Hi there
In Internet Expenses, Expense Report Line Detail we have two unrelated fields; namely Expense Location & Tax Code.
The requirement is to map a default tax code to locations; basically when a user enters Expense Location then the mapped tax code value should default into field Tax Code.
The location-tax code mapping is stored in a custom lookup (FND_LOOKUP_VALUES).
My question is how does one go about implementing this? For example is it possbile to create a new (hidden) LOV based on the lookup mapping & then create a Personalization LOV Mapping between the 3 LOV... Or is it necessary to modify the Tax Code drop down Message Choice in JDeveloper? Of course details are appreciated!
FYI below is the relevant Personalization Structure from "Personalize Stack Layout: (NormalDetails)".
Message Lov Input: Expense Location
- Lov Mappings
-- Lov Map: (lovMap1)
-- Lov Map: (lovMap2)
-- Lov Map: (lovMap3)
- Message Text Input: Expense Location
- Message Styled Text: Transaction Location
- Message Text Input: Merchant Name Yes
- Message Styled Text: Description
- Message Check Box: Original Receipt Missing Yes
- Message Choice: Tax Code
- Message Check Box: Amount Includes Tax
- Message Choice: Tax Code
Many thanks
G

Hello all
The correct & supported method is this:
Extend the location LOV in JDeveloper & add a "default tax" attribute, this could be derived from a new location DFF storing the default tax code for each location. Now simply create a location Personalization LOV Map which takes this new location lov tax attribute & target it to the tax message choice field.
That's my 2c worth anyway, so please give comment if you feel there is a better way.
There is just one more little problem however... The requirement has changed! Now we require the tax code to default according to not one location field, but other fields too. For example if the user selects Expense Type of Beverage & Location of Netherlands then Tax Code should be NL19%, for Expense Type of Hotel then it should be NL6%; if the user ticks "Missing Receipt" field then it should over ride all others & set the code to NL0%.
Any ideas?
Many thanks
G
Edited by: user13363208 on 11-Aug-2010 06:51

How does one loop playback of small selections within the timeline?

How does one loop a selection of footage from within the timeline? I'm trying to edit students' tapping hands and pencils on desks into small timed chunks that will play back as seamless loops and I need to be able to slowly shorten or elongate sections of footage as it plays and repeates until the loop matches the timing of the song we are making. I'm using PE8 and can't seen to find an easy way to do this. Surely there is one! Is there?

I appreciate the help everbody, but It looks like I didn't state my question effectively. Let me try again.
It will be easier if I explain what it is I am used to. This is what I need to know how to do in PE8, because the school in which I teach AV has chosen PE8 for my classes and won't let me install anything else.
In Sony Vegas - all versions, you can click and drag to quickly make a selection of video and audio. You can do this while video is rolling and you can then choose to have your A&V loop within this selection. I have seen replies on this forum where this feature within Vegas was treated as if it were a dumb thing. It's not dumb once you realize what it can be used to do for you. While continuing to loop within your slelection, you can move this selection throughout your timeline, rough tuning where you want your loop to be. If your loop needs to be exactly 66 frames, for instance, you could first set this selection at 66 frames and then move it up and down the timlene until you find the best place to cut. Or, in the case of trying to find where some sound within your selection makes a seamless loop, you can increase or decrease the size of your selection on the fly as the selection continues to repeat.
How do you do that in PE8? If it can't do it, can the full version of Premiere?
Thanks again for the help.
-Chris

New to using Firefox with MAC: How does one save a single jpeg image from the web (as in a right click on a pc?)

New to using Firefox with MAC: How does one save a single jpeg from the internet, similar to using the right mouse click on a pc?

If your question comes about because you have a single button mouse, it's time to visit your local computer store and get a ''real'' mouse for that MAC. I don't "get" Apple, they sell their hardware for almost twice what a comparable PC would sell for - and then they leave out what is probably the most important time saving control, the right-button.
See this for setting the hidden pref for context menus in Firefox, for Mac's.
http://kb.mozillazine.org/Ui.click_hold_context_menus
type '''about:config''' in the URL bar and hit Enter
Pref Name = '''ui.click_hold_context_menus'''
Double-click to Toggle to '''True'''

SharePoint Designer 2013 (2010 Platform Workflow) - How can I create a new list item with a SPECIFIC content type?

In SharePoint 2010 I created workflows that used the 'Create list Item' Action, which then set the Content Type ID (so I could create documents of various types in a document library).
We just switched to the SharePoint 2013 platform, and now the drop down for Content Type ID is blank in all of the workflows that are still using the SharePoint 2010 platform. Is there any way to create a list item with specific content
type? Even if I could just input a string into that field instead of using this blank drop-down. Please help!

Hi Sarah,
According to your description, my understanding is that you cannot create a new list item with a specific content type using SharePoint 2010 Platform Workflow.
I tested the same scenario in my environment, and the Create List Item worked fine with the specific content type.
How did you create the content type?
Please check if the content type is added to the list/library the workflow associated with.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

How does one create a GROUP mailing list from an e-mail message ? ?

I am having no end of frustration trying to figure out - using the latest versions of Apple Mail and Apple Address book in side-by-side windows, t he following:
How to select; then 'drag & drop' a list of email addresses from an incoming email message I am reading, so that I can create in my own address book a duplicate "Group" list bearing all the addresses that got the message.
I am sure I have been able in the past to use simple drag-n-drop technique between the mail window and the newly created "Group" window in Address Book, but it won't work this time .
Is there a script or a third party app somewhere that will lift addresses out of the "TO" and "c.c." fields in an Apple Mail message and import them into a designated (new) 'Group' list in Address Book.
Or is there a way to create a CSV file from an email message - if that will do the trick ?

Mailscript's Add Addresses script should open a window with all the addresses in the email listed. You can select the ones you want to import, you can choose the group or create a new one, and you can pick the label for the email address. It will stay open so that you can add different emails to different groups.
Your description doesn't sound anything like Mail Scripts.

How does one create a user with a null password in iManager?

I'm setting up LDAP authentication and need to create a user with a null password.
If you do not put a password in the password field when creating the user in iManager, a message pops up stating, No password has been defined for this user.
You are given a choice of:
Allow user to log in without a password
- or -
Do not allow user to log in without a password
If you choose Do not allow user to log in without a password, there are no complaints.
When I look at the properties of the newly-created user, however, I note that the "Require a password" checkbox is not filled in.
That would imply that the answer to the question posed during the user's creation is moot; either answer produces a user that can log in without a password.
I can then assign the Common Proxy password policy to the user, which does not dictate a minimum length for a password.
From that point forward, any attempts to leave the password field blank in iManager results in another pop-up message stating:
"Failure to enter a password will allow the user to login without a password."
That implies that no password exists for the user, as opposed to a null password.
Is that correct or are the public and private key for the user object still generated?

If you do not specify a password, which is what happens when you select
the 'Do not allow user to log in without a password' option initially, the
user cannot login. A user with no password (meaning no password exists at
all, similar to a 'null' in programming) cannot login with a password
because, of course, they do not have a password.
If you specify a zero-length string as the password you are effectively
(and usually) creating a proxy user, for example to be used for the LDAP
service in eDirectory, and this user can login typing in a password (since
typing would imply one or more characters) but nevertheless there IS a
password, but it happens that it is zero-length, so typing nothing for the
password IS submitting the correct password. This is the option carried
out by eDirectory when you choose, 'Allow user to log in without a
password' (the prompt is a little misleading with its "without a password"
phrase).
Once you assign a UP policy you are telling the system that there SHOULD
be a password on the user (and with common proxy there definitely should
be, probably a strong one at that) so the only option now is whether or
not the password is zero-length or longer. Obviously longer is the
correct option for security reasons.
Good luck.
If you find this post helpful and are logged into the web interface,
show your appreciation and click on the star below...

How does one Create Bootable DVD from downloaded iso image in Windows?

I have a completely empty system I want to load Solaris Express on. I have access to web on a Windows XP machine and have downloaded the Solaris iso image. Using WindowsXP facilities simply copies the iso image as an intact iso image file and resulting disc is not bootable. Windows knowledge base very conveniently says that what happened to me is what happens. No obvious referral to how to do it....
A) So for a non-Windows savy person who does not want to become Windows savy (That is why I downloaded Solaris!) Where is a set of instructions on how to (inside Windows XP) "extract" an iso image to a CD / DVD disk so it will be bootable?
B) It sure would be nice if Solaris were able to be loaded onto a USB Flash drive and booted at will from any USB computer. Just plug it in and boot. Has this been done?
C) Getting a physical disk by snail mail from Sun is very slow for me.... (3 weeks and still watching the mail box...)

A) So for a non-Windows savy person who does not want to become Windows savy (That is why I downloaded Solaris!) Where is a set > of instructions on how to (inside Windows XP) "extract" an iso image to a CD / DVD disk so it will be bootable?http://www.sun.com/software/solaris/download_instruction.xml
You probably copied the .iso file as one single very large file onto media. Instead, you can use a utility such as Roxio DVD Creator or Nero (or freeware like cdrecord) , and select the option to burn an image that already exists. No special boot options are needed, because the ISO image already contains the boot information needed.
B) It sure would be nice if Solaris were able to be loaded onto a USB Flash drive and booted at will from any USB computer. Just plug > it in and boot. Has this been done?With the Newboot project introduced into Solaris Express, I believe it is now possible. I'm not a USB expert, though, so cannot say for sure.
C) Getting a physical disk by snail mail from Sun is very slow for me.... (3 weeks and still watching the mail box...)I can't comment on that.
-- Alan

How does one create the Process List (AdminUI) with the provided SDK API?

Similar Messages

Maybe you are looking for