How is the largest cde point differs from UTF-8 to UTF-16
how is the largest cde point differs from UTF-8 to UTF-16
the largest code point is 10FFFF for both of them then how is differ from the fromat
thank you,
Regards,
Jagrut BharatKumar Shukla
In this specific case there are no differences for code points storing character data because used character set is the same.
But what is your Oracle 4 digits version ?
Are you sure that database character set and national character set are the same ?
In recent Oracle versions, database character set and national character set are different. For example:
SQL> select * from nls_database_parameters where parameter like '%SET%';
PARAMETER VALUE
NLS_CHARACTERSET AL32UTF8
NLS_NCHAR_CHARACTERSET AL16UTF16Edited by: P. Forstmann on 28 sept. 2011 18:51
Similar Messages
-
How we represent largest code point in UTF-8 and UTF-16 whats the differenc
how we represent largest code point in UTF-8 and UTF-16 whats the differenc
points will be awardedThere are standards from for CHARACTER encoding.
See below for a brief description:
UTF-16 (16-bit Unicode Transformation Format) is a variable-length character encoding for Unicode, capable of encoding the entire Unicode repertoire. The encoding form maps code points (characters) into a sequence of 16-bit words, called code units. For characters in the Basic Multilingual Plane (BMP) the resulting encoding is a single 16-bit word. For characters in the other planes, the encoding will result in a pair of 16-bit words, together called a surrogate pair. All possible code points from U0000 through U10FFFF, except for the surrogate code points UD800UDFFF, are uniquely mapped by UTF-16 regardless of the code point's current or future character assignment or use.
UTF-8 (8-bit UCS/Unicode Transformation Format) is a variable-length character encoding for Unicode. It is able to represent any universal character in the Unicode standard, yet the initial encoding of byte codes and character assignments for UTF-8 is consistent with ASCII (requiring little or no change for software that handles ASCII but preserves other values). For these reasons, it is steadily becoming the preferred encoding for e-mail, web pages, and other places where characters are stored or streamed.
Check this site for details.
http://unicode.org/. -
In the info bar at the bottom of the iphoto screen, why is the number of items different from the total?
What version of iPhoto and system are you running? What mode are you in, i.e. Events, Photos?
If it's the Photos mode the number at the bottom will represent the number of photos displayed in that mode or the number of photos selected in that mode. The number will match the number next to the photos mode only when there are no photos in that mode that are selected.
If you click on the Events icon and then back on the photos icon the numbers should match.
OT -
While executing the query the output is completey different from the query
Dear friends,
We built a query and loaded the data for that infoprovider.
While executing the query the output is completey different from the query what we have built.
Output has no relevance to the query.
Kindly help the same.
Regards,
SathyaHI Satya,
In my opinion the issue is with your front end.
Results should be identical in RSRT, BEx Analyzer (Workbooks) and the ABAP-Web since all three frontend tools use the "ABAP Runtime layer".
It may differ In the Portal where the new "Java Runtime layer". (Java-Web.) is used.
This is given in OSS Note 1296576 - Different Query Behaviour: ABAP - Java.
So i think the problem lies in your analyser. If you are using Analyzer: BI Add on 7.X (Based on 7.10) try and get support package 8.
Hope this helps.
Thanks,
Rahul -
I got my Apple TV from US but I live in India where the electric voltage is different from US we have 220 voltes here in India so can I use it in India without any Votage converter thing?
According to the technical specifications of the apple tv it "has a universal power supply". I live in korea, but am a US citizen and my place has all US standard power so I can't really comment. However below is a link for your reference.
http://support.apple.com/kb/SP598 -
HT4221 How does the Ipad5 sort photos synced from a computer
How does the Ipad5 sort photos synced from a laptop?
Hi Nancy 2803,
I am guessing you want to sync photos from your iPhone 5S to a Laptop i.e. a Windows Laptop.
Firstly when you insert your iPhone into your computer, go to:
1. Computer
2. Wait for the Laptop to recognize the iPhone
3. Right Click on your iPhone Named: [NAME iPhone] or something simular
4. Click import pictures and videos
5. Click import settings
6. Click Folder Name
This folder name is how the images will be arranged, either:
a) Date imported and Tag
b) Date Taken and Tag
c) Tag and Date imported
d) Tag and Date taken
e) Tag and Data Taken Range
f) Tag
I use Date Taken and Tag as this allows me to see in my pictures library a date and the images taken that date, i.e. all the images taken on the 25/12/2013, if you use date imported, you just get all your images stored in one folder and cannot quickly find images on a date.
In this setting you can also change the folder to where the images/videos will be saved, the name of the images as well as options such as delete images from the device once imported.
Many Thanks, Happy New Year and I cannot wait to hear from you again in regards to this issue.
iBenjamin Crowley -
I brought a new ipad mini with retina. The color saturation is too low to me, especially the purple. My wife started to complain because the color is really different from inphone and ipad. Can user adjust that?
Other than a couple of minor adjustments, such as the one that Diavonex suggested above, there is nothing that a user can do in settings to adjust color. There is no way to calibrate the color like you can do with a computer monitor.
-
Code
public void ScrollNews()
listsext.Ext(page);
combindedString = string.Join(Environment.NewLine, ListsExtractions.myList);
richTextBox1.SelectAll();
richTextBox1.SelectionAlignment = HorizontalAlignment.Right;
richTextBox1.AppendText(combindedString);
scrollerText = string.Join(Environment.NewLine, ListsExtractions.myListWithoutLinks);
scroller1.TextToScroll = scrollerText;
if (NewsLevels.newsLevel && NewsLevels.shouldStart)
UpdateTextControls();
scroller1.Start();
NewsLevels.shouldStart = false;
if (NewsLevels.newsLevel == false && NewsLevels.shouldStart)
UpdateTextControls();
scroller1.Start();
NewsLevels.shouldStart = false;
string[] rlines = richTextBox1.Lines;
richTextBox1.SelectionStart = 0;
richTextBox1.SelectionLength = rlines[0].Length;
richTextBox1.SelectionColor = Color.Red;
richTextBox1.Select(rlines[0].Length, rlines[1].Length + 1);
richTextBox1.SelectionColor = Color.Green;
RedColorAlert1();
if (lines == null)
label5.Text = "0";
else
label5.Text = lines.Length.ToString();
The line is:
richTextBox1.AppendText(combindedString);
I'm calling this method ScrollNews every X minutes with a timer.
The way it is now it will AppendText all the time. But i want it to Add the combinededString only if the text in combindedString was different from the text that is already in the richTextBox. Somhow to keep all the time the last text and compare it and
if there is a new text then appen it.public void Scroll()
listsext.Ext(page);
combindedString = string.Join(Environment.NewLine, ListsExtractions.myList);
richTextBox1.SelectAll();
StringBuilder sb = new StringBuilder();
sb.Append(combindedString);
richTextBox1.SelectionAlignment = HorizontalAlignment.Right;
richTextBox1.AppendText(combindedString);
The problem is that now it will keep adding to the richTextBox the content in combindedString over and over again. I need somehow to check each time if the content in combindedString already exist in the richTextBox if not meaning it's new content then AppendText
it.
If it's the same already exist do nothing don't add it.
EDIT
I write to a text file the content of the ombindedString variable .The first content the lines is the combindedString:
המשטרה עצרה אמא ל2 ילדים קטנים שבעלה נעצר בחשד למעורבות בעלה בכריתת עצים
15:03 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189935.shtml
אדם החשוד בעבירת מין בקטינים נעצר לאחר שהתלונן על 2 שסוחטים אותו על רקע מעשיו
14:50 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189932.shtml
אינדונזיה: 5 הרוגים בקריסת האנגר בנמל תעופה
14:44 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189930.shtml
אום אל-פחם: מספר חשודים עוכבו בחשד למעורבות במימון טרור
14:04 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189914.shtml
אלמנתו של רפ''ק ג'דעאן אסעד, שנרצח בפיגוע הדריסה, ילדה בן
13:05 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189884.shtml
תנאי ליברמן לכניסה לממשלה עונש מוות למחבלים חובת חתימה על מסמך נאמנות
12:39 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189868.shtml
תלמיד תיכון מרחובות חשוד שהפעיל מעבדה ביתית לזיוף תעודות זהות ואישורי מחלה
12:03 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189856.shtml
הצביעות של רענן שקד: האשים את אמהות 3 החטופים ומגנה את חגי הוברמן
11:43 דווח במקור בתאריך : 09.03.15 : שעה
http://rotter.net/forum/scoops1/189848.shtml
And this is a screenshot i couldnt copy the text of the richTextBox1.Text
richTextBox1.Text content image
co uld be that the format of the text in the combindedString and the richTextBox1.Text looks different so it think it's not exist ?
Update:
Not sure if it's important but the combindedString i'm adding the text to it from the variable ListExtractions.myList
myList is List and i build this List like that:
private void ListToStringList(List<string> myl)
for (int i = 0; i < AllNews.Count; i++)
myl.Add(AllNews[i].text);
IFormatProvider provider = CultureInfo.InvariantCulture;
DateTime myTime = DateTime.ParseExact(AllNews[i].original_time, "DyyMMddTHHmm", provider);
string results = myTime.ToString("HH:mm דווח במקור בתאריך : dd.MM.yy : שעה");
myl.Add(results);
myl.Add(AllNews[i].link);
myl.Add(Environment.NewLine);
myListWithoutLinks.Add(AllNews[i].text);
myListWithoutLinks.Add(results);
myListWithoutLinks.Add(Environment.NewLine);
for (int i = 0; i < myl.Count; i++)
myl[i] = Regex.Replace(myl[i], @"\t|\n|\r", "");
And use it:
ListToStringList(myList); -
How do I stop getting this message to come up and be able to get my mail. The Procedure entry point PORT_Load Library From Origin could not be located in the dynamic links library
== This happened ==
Every time Firefox opened
== todayWith Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck -
How is the follow-on doc triggered from shopping cart in SRM 7.0?
Hi!
We are on SRM 7.0 and want to make a solution where we create a PM order (Work order) as a follow-on document in backend instead of a Requisition or PO. There are desciptions on how to change document type and function using BADI's for the older SRM solutions, but this does not seem to work in SRM 7.0.
Right now we have customized the system so a Requistion is created in backend and that works fine.
Next step is to find a BADI to replace the call to BAPI_REQUISITION_CREATE with a Work order BAPI call (BAPI_ALM_ORDER_MAINTAIN),
I have tried to debug the process in Web Dynpro from the Shopping Cart where I press the 'Order' button', but never get to a point where the BAPI is called. It only seems like the shopping cart is saved in SRM tables and that the Workflow for approval process is started. We do not use the approval Workflow and the SC gets the status 'Approved' immediately.
When I monitor the shopping cart I can see that it gets the status 'Follow-on document created' about one minute after the Approved status, and that also makes me wonder if the transfer of the SC to backend is done in a batch job, from a Workflow program or anything like that - and not from the Web Dynpro method calls behind the Order button.
Does anyone know the technical details of the solution of the follow-on document creation in SRM 7.0?
Where is the triggering done??
Regards, TineHi Ricardo!
Thanks for you reply. So this means we have to create a kind of batch job with a program which runs FM BBP_PD_SC_TRANSFER ? How can we avoid that the original backend document is not started in addition (the reqiusition which is set up in customizing) ? Is it possible to customize the shopping cart solution so it does not trigger any backend documents automatically - so we can take the complete control using this batch job mentioned?
PS: Do you know exactly where the BAPI for the requisition is triggered in SRM 7.0? Would be nice to know after all my debugging with no results
Regards, Tine -
Why can the explain plan be different from 2 exact set of structures
hi,
i have from a view some base tables let's say A , B, C & D
this query is running very slow . so from the same database , i created tables A1 , B1, C1,& D1 from the above tables.
i created some new indexes on A1 to D1 tables and the results returned to me is fast.
i did an exlain plan
so i drop the indexes on the original A to D table and created the new indexes as per A1 to D1 and analyzed them. and i also did an explain plan
but the query is still running slow and also the explain plan is different to the one from A1 to D1 (the one that running fast)
pls help me to understand how/why can this happen ?
tks & rdgshi,
precisely i could have been providing insufficient information but i am too inexperienced to be able to give you the required information and i am also not very sure where i could get the info so that you all can advise me further.
but this is from the user_tables , the only difference i see is that
under LOGGING table A to E is 'YES'
TABLE_NAME TABLESPACE_NAME PCT_FREE LOGGING BACKED_UP NUM_ROWS BLOCKS CACHE TABLE_LOCK PARTITIONED
A1 OWNER1 10 NO N 37332 883 N ENABLED NO
B1 OWNER1 10 NO N 43458 861 N ENABLED NO
C1 OWNER1 10 NO N 823828 7826 N ENABLED NO
D1 OWNER1 10 NO N 881176 14646 N ENABLED NO
E1 OWNER1 10 NO N 18868 223 N ENABLED NO
A OWNER1 10 YES N 37040 880 N ENABLED NO
B OWNER1 10 YES N 43386 880 N ENABLED NO
C OWNER1 10 YES N 823820 7684 N ENABLED NO
D OWNER1 50 YES N 880948 26624 N ENABLED NO
E OWNER1 10 YES N 18690 244 N ENABLED NOtks & rdgs -
How to read binary floating point values from TCP/IP
I am attempting to use a LabView application to read an array of binary single precision floating point numbers transferred through a TCP/IP connection from a Windows C++ program. The endianization occurs before the values are sent to the Labview application. When I read the values in LabView, some values are interpreted correctly, some are not. For instance, the C program is sending a 6 as one element, and 7 as another. Labview interprets both as 6. The difference between 6 and 7 in binary format is 1 bit (bit #21 if counting from 0 in LabView format). There are 2 other values that show the same error- 459.67 is being sent, 395.67 is read by labview (1 bit difference, exact same bit... 7.5 is being sent, 6.5 is being read by LabView (1 bit difference, exact same bit). LabView reads that bit as 0, when it should be 1.
This seems very odd to me because most values are being read correctly, including other values with that same bit on. There are values being read correctly that are both before and after the incorrect values in the array, so it's not just an issue with an offset or something in the bit stream. Additionally, when attempting to read an array of values with all bits on, I get a strange pattern of 111110011111100111111001111110.
We have also verified that the binary representation for the values is the same on both machines, once you account for the byte swapping. What am I missing here? How in the world can some values come across correctly and others incorrectly? Any help would be greatly appreciated! Our fallback is to transfer everything in ASCII, which is going to greatly increase packet sizes.
Thanks,
JasonUpdate:
Problem fixed. I say fixed and not solved because I don't know why it's fixed. I had been storing the TCP/IP read in a string and passing it through a shift register after each read. I would then concatenate it with the TCP/IP read result in the next loop. After each read, it would search the concatenated string for ASCII flags. When it found them, it would strip off the flags and then type cast the rest as single precision floating points.
I knew I would be getting the same number of bytes each time, so I ditched the ASCII flags and had just the binary values sent. This way, I expect to get all of the values in one TCP/IP read. No values are passed through a shift register to the next loop and there is no concatenation of the string outputs from TCP/IP read.
I'm not sure if it was the ASCII flags being included or something with the way I was manipulating the string that was causing the binary values to be interpreted incorrectly. Hope this helps someone else.
Jason -
How are pre-named software tracks different from 'new' tracks ?
We have these software tracks or audio tracks with names like Percussion , guitar , piano etc......how are these tracks different from a track which we make from menu as a new track ?
Like we have various effect presets in guitar tracks is it so all these pre named tracks have some specific presets assigned ?
or if I'm recording in a midi track it can be any name all the tracks have same parameters and a region will sound same in any of them effectwise ??All predefined instrument patches are having a set of suitable effects and filters assigned. YOu can see these in the "Info" panel, after you select an instrument your track. Click the "Edit" tab, and you will see, how the predfined patches differ.
For a midi track, the sound generator will differ dependng on the instrument group, and some basic effects will be predefined, like "Compressor". YOu can click the empty bricks to add your own effects. -
Why is the Application Tab so different from the rest of iTune?
It feels like the Applications tab is not from Apple. Is it done by a outsourcing company in China? There is no consistency between this tab with the rest of iTune. Is there a design theme across all parts of iTune? Why there is no list view for the Apps?
One thing I miss much is the ability to check off an App so that it will not sync to my iPhone. The same way that I can decide with song go to my iPod. Since the iPhone only has 144 slot for applications, it is important to have such selection ability. The other thing I miss is the rating. I'd like to rate the applications so that if I have purchased more than one version of the same kind of app, I can choose which goes to my iPhone based on my own rating. I also want to be able to sort the Apps by category in the list view. How about folders that each corresponds to one page on the iPhone? The way to reorganize the Apps icons is just a pain after you have more than a few pages.Hi LaiPod
These are good suggestions, I suggest sending feedback to apple via: http://www.apple.com/feedback/itunesapp.html
J.C -
When and how does the message context get removed from the message when we use pass thru send port
Friends,
i have a doubt regarding message context.
Assume i have used XMLRecieve pipeline in the receive side to receive the message so that the message context is created. I.e properties are promoted/written.
now if we use pass thru transmit pipe line at send side, how and when does the message context get removed from the message?? Since pass thru does not have any stages/components, how does the message context removed and sent out a pure message to destination???
i mean what exactly happens here to remove the context??
RavindarThanks for the reply.
"The Context is created by the Adapter, regardless of any Pipeline or Pipeline Component. It has nothing to do with PassThrough vs. XmlReceive, although XmlReceive will write Promoted Properties to the existing Context,
as can any other Component."
yeah yeah, adapter does create some properties in context. You are right, i am aware of it. I just missed to explain it clearly. what i meant is addition of context properties will not happen if pass thru used. Thanks its clear.
"No. The Context already exists on the Message when it comes from the MessageBox and
is equally available to any Component in any Stage. The Context that hits the Pipeline is whatever was last Persisted, either by a Receive Port or Orchestration. It is not created by the XmlAssembler (XmlTransmit)"
You are right , the context already exists on the message while it leaves the receive port, and once it persists
to message box the context and message context gets stored in messages in relative tables.
Now as you said the components get the message from the last persistence, assume i have a send port(with passthru)
subscriber and a orchestration subsrciber for this message.
Orchestration gets the message with context right!!
if the send sendport(with passthru) also gets message along with context, then where is this context removed/demoted
while sending it out?. i guess as per SAAkhlaq said,
here sendport(with passthru) should get a pure message without context as passthru used.
or is it that ultimately send adapter removes the context completely?
or is it something like biztalk run time load the context from database into cache and both orchestration and send port gets pure message, and if needed they use context from cache???
sorry i may be troubling you, but i am confused. i hope i am not creating any nuisance with this
post.
Ravindar
Maybe you are looking for
-
Purchase Order - Subject E-mail
Hi All, When I create an e-mail trough the transaction code ME23N and I try to send the e-mail trough the transaction code ME9F the e-mail arrives with a default subject (PROGRAM NAME + CURRENT DATE), I need change the subject according the necessit
-
Camera to iPad downloading, possible?
Is it possible to download via cable from camera to iPad? If so, what cable, brand, where purchased. Thanks
-
EXIT_SAPLVEDA_001 address mapped for STRS2
Even though the structure dxvbadr is filled with desired values, these values are not reflecting on the sales orders. The initial values before triggering user exit, are only being reflected on the sales order. I wondering why. Why the sales order he
-
OS users for Data Service and Information Platform Service
Hello experts, We will install SAP Data Server 4.2 Support Package 2 which required Information Platform Service to be installed before. Can we use the same operating system user boadm for both software installation and maintenance. Thanks & Best Reg
-
Webdynpro ABAP Naming Conventions
Hi All Can any body help me with writing Naming Conventions for development in Webdynpro ABAP. Is there any documentation regarding this........any help will be highly appreciated. cheers AJ