How manuplate data on multiple tables in the oracle resource adapter

Hi all,
I have a requirement to write an resource adapter for oracle. But the key point is that, the user creation has to add entries in several tables and same goes with updation and getting the results.
Please help me with the code snippet, if any one has gone through this one already.
Can stored procedure can be executed in the normal oracle resource adapter , so that it does all the required work ? while the adapter is in quick need, friends please help me out.
Thanks,
idm developer

google 'Instead-Of Trigger', it's pretty handy

Similar Messages

Multiple EARs packaging the same resource adapter -- Weblogic Application S

Hello,
I had a question regarding JNDI and deploying multiple applications (EAR's) which package the same resource adapter running on Webloigc Application Server 9.1. I have an EAR file, ear1, which contains a resource adapter with connection factory with JNDI name say 'xyz' specified in the weblogic-ra.xml file. I have another EAR file, ear2, which again packages the same resource adapter with the same connection factory with JNDI name 'xyz'. Upon activating the 2nd EAR file, I get an exception 'javax.naming.NoPermissionException: A Resource Adapter may only be accessed from within the same application from which it was deployed.', as seen below:
<May 8, 2006 10:29:27 AM PDT> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating distribute task for application 'JMS2JMS_eInsightweblogic2'.>
<May 8, 2006 10:29:27 AM PDT> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: java.lang.AssertionError: Internal Error occurred, Assertion Failed: No Initial Context for Jndi: javax.naming.NoPermissionException: A Resource Adapter may only be accessed from within the same application from which it was deployed.
at weblogic.connector.deploy.ConnectorModule.prepare(ConnectorModule.java:217)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:90)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:318)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:53)
Truncated. see log file for complete stacktrace
javax.naming.NoPermissionException: A Resource Adapter may only be accessed from within the same application from which it was deployed.
at weblogic.connector.outbound.RAOutboundManager.getConnectionFactory(RAOutboundManager.java:721)
at weblogic.connector.deploy.JNDIHandler.getConnectionFactory(JNDIHandler.java:1017)
at weblogic.connector.deploy.JNDIHandler.lookupObject(JNDIHandler.java:871)
at weblogic.connector.deploy.JNDIHandler.getObjectInstance(JNDIHandler.java:845)
at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304)
Truncated. see log file for complete stacktrace
It seems like the 2nd EAR is trying to go across and lookup the connection factory from the 1st EAR. Does weblogic bind the RA's connection factory jndi name in the global jndi and is not specific to each EAR? Is there some flag or switch I can turn on to make the JNDI specific to each EAR?
My weblogic deployment descriptor for the ra looks like the following:
<weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.bea.com/ns/weblogic/90
http://www.bea.com/ns/weblogic/90/weblogic-ra.xsd">
<jndi-name>JMS2JMS_eInsightDeployment4_stcbpelra</jndi-name>
<enable-access-outside-app>false</enable-access-outside-app>
<enable-global-access-to-classes>false</enable-global-access-to-classes>
<outbound-resource-adapter>
<connection-definition-group>
<connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
<connection-instance>
          <b><jndi-name>BPELConnectionFactory</jndi-name></b>
          <connection-properties>
          <pool-params>
          <initial-capacity>0</initial-capacity>
          <max-capacity>10000</max-capacity>
          <capacity-increment>1</capacity-increment>
          <shrinking-enabled>true</shrinking-enabled>
          <shrink-frequency-seconds>60</shrink-frequency-seconds>
          <match-connections-supported>false</match-connections-supported>
          </pool-params>
          <properties>
               <property>
                    <name>BPELConnectionFactory</name>
                    <value>BPELConnectionFactory</value>
               </property>
          </properties>
          </connection-properties>
     </connection-instance>
</connection-definition-group>
</outbound-resource-adapter>
</weblogic-connector>

Thanks for the reply... in my case this would be done by the active synch process so no GUI form is required. I will be getting a list of application ID for the user by LDAP AS. One i get it i will have to parse it and get the list of application user id. I am passing those ID;s to a workflow where I am forming the resource name as you mentioned
for example:
If i get user1#user2#user3 from AS i am separating them based on # using split and getting 3 different user id;s
now i am forming a string with the resource name and passing it to the sub process in which i am checking out the user object, setting the user attributes and checking in the new view.
user1#LDAP
user2#LDAP|1
user3#LDAP|2
Problem ; When i run this user1 is getting created in LDAP but user2 and user3 are not. There entry is getting created in IDM.
When I open the IDM object I get a yellow triangle (warning) and if I open the user object and hit save button IDM creates the user account on the LDAP.
any help for further solving this problem would be appreciated.
Regards,

Move data from multiple Tables to a Single Table & Convert the list to ALV.

Hi,
My aim is to get the list of Materials with their descriptions, with MRP Controller, with Unrestriced Qty. & the Reorder Qty. So, I have to fetch the data from different tables. But finally I am not able to copy or move the fetched data from multiple tables into the single final table.
Also tell me how to convert this list into ALV.
Below is the program code.
*& Report Y_REORDER_REPORT
REPORT Y_REORDER_REPORT.
tables : marc,makt, mard.
DATA: Begin of i_final occurs 0,
        matnr type marc-matnr,
        maktx type makt-maktx,
        DISPO type marc-DISPO,
        MINBE type marc-MINBE,
        LABST type mard-LABST,
      end of i_final.
DATA: Begin of i_marc occurs 0,
       matnr type marc-matnr,
       DISPO type marc-DISPO,
       MINBE type marc-MINBE,
      end of i_marc.
DATA: Begin of i_makt occurs 0,
       matnr type makt-matnr,
       maktx type makt-maktx,
      end of i_makt.
DATA: Begin of i_mard occurs 0,
       matnr type mard-matnr,
       LABST type mard-LABST,
       LGORT TYPE MARD-LGORT,
      end of i_mard.
SELECT matnr
        dispo
        minbe from marc
        into corresponding fields of table i_marc
        where dispo EQ 'STR'.
SORT I_MARC by MATNR.
WRITE: /10 'Material',
        75 'MRP',
        80 'Reorder Qty.'.
LOOP at i_marc.
Write: /10 i_marc-matnr,
        75 i_marc-dispo,
        80 i_marc-minbe.
ENDLOOP.
write: /.
SELECT matnr
        MAKTX from makt
        into corresponding fields of table i_makt
        for all entries in i_marc
        where matnr = i_marc-matnr.
LOOP at i_makt.
Write: /10 i_makt-matnr,
        30 i_makt-maktx.
ENDLOOP.
SELECT matnr
        LGORT
        LABST from mard
        into corresponding fields of table i_mard
        for all entries in i_marc
        where matnr = i_marc-matnr.
LOOP at i_mard.
Write: /10 i_mard-matnr,
        30 I_MARD-LGORT,
        40 i_mard-labst.
ENDLOOP.
move i_mard-matnr to i_final-matnr.
move i_marc-dispo to i_final-dispo.
move i_marc-minbe to i_final-minbe.
move i_makt-maktx to i_final-maktx.
move i_mard-labst to i_final-labst.
WRITE: /10 'Material',
        30 'Material Desc.',
        75 'MRP',
        80 'Reorder Qty.',
        105 'Current Stock'.
LOOP at i_final.
Write: /10 i_final-matnr,
        30 i_final-maktx,
        75 i_final-dispo,
        80 i_final-minbe,
        105 i_final-labst.
ENDLOOP.
*LOOP at i_mard.
*Write: /10 i_mard-matnr,
       30 i_makt-maktx,
       75 i_marc-dispo,
       80 i_marc-minbe,
       105 i_mard-labst.
*ENDLOOP.
Regards,
Vishal

Change like this,
SELECT matnr
lgort
labst FROM mard
INTO CORRESPONDING FIELDS OF TABLE i_mard
FOR ALL ENTRIES IN i_marc
WHERE matnr = i_marc-matnr.
LOOP AT i_mard.
   WRITE: /10 i_mard-matnr,
   30 i_mard-lgort,
   40 i_mard-labst.
ENDLOOP.
LOOP AT i_marc.
   READ TABLE i_mard WITH KEY matnr = i_marc-matnr.
   READ TABLE i_makt WITH KEY matnr = i_marc-matnr.
   MOVE i_mard-matnr TO i_final-matnr.
   MOVE i_marc-dispo TO i_final-dispo.
   MOVE i_marc-minbe TO i_final-minbe.
   MOVE i_makt-maktx TO i_final-maktx.
   MOVE i_mard-labst TO i_final-labst.
   APPEND i_final.
ENDLOOP.
WRITE: /10 'Material',
30 'Material Desc.',
75 'MRP',
80 'Reorder Qty.',
105 'Current Stock'.

Storing Data in multiple tables of a database

HI
In my process i need to store all the data from the process to a database.i want to store the data in multiple tables of the database.Is it possible to store the data in multiple tables using the database acitivity in livecycle and how to do it?

You can mention 'n' number of SQL statements in the Database Activity.
for eg. look at the following activity which holds multiple SQL statements.

Inserting data into multiple tables in jdbc

I am doing on file to jdbc. Now I got a requirement to insert data into multiple tables on the receiver side. How can I do this ?

Hi,
you are going to insert data into 4 tables in a sequence one after another , I see three options.
1) Stored procedure and 2) creating 4 statement data structure (one for each table)
The third option is writing a SQL with join for the 4 tables and use action command = SQL_DML. Example as follows....
Write SQL code and place it in access tag. Pass values for the columns using key tag...
<stmt>
    <Customers action="SQL_DML">
      <access> UPDATE Customers SET CompanyName=u2019$NAME$u2019, Address=u2019$ADDRESS$' WHERE CustomerID='$KEYFIELD$u2019
      </access>
      <key>
        <NAME>name</NAME>
        <ADDRESS>add </ADDRESS>
        <KEYFIELD>1</KEYFIELD>
      </key>
    </Customers>
</stmt>
Refer this http://help.sap.com/saphelp_nwpi71/helpdata/en/44/7b7855fde93673e10000000a114a6b/content.htm
Hope this helps ....

In ADF how can i insert data in multiple table if they have foreign key

I have started working on ADF and can anybody inform me in ADF how can i insert data in multiple table if they have foreign key,please?
Thnak you very much.

Hello,
Still no luck.I am surely doing silly mistakes.Anyway,Here are my workings-
1> student_mst (id(pk),studentname) and student_guard_mst(id(fk),guardianname)
2> created EO from both of the tables,made id in both EO as DBSequence and an association was also generated.
3> i made that association composite by clicking the checkbox
4> i created 2 VO from 2 EO.
5> put those VO in Application Module.
6> dragged and dropped 2 VO on my jspx page and dropped them as ADF Form.
Now what to do please?

How to extract data from multiple tables (always got errors)

Dear Experts,
I have a simple mapping to extract data from multiple tables as a source (A, B, C) to a target table (X). Below is the picture:
(Sources)....(Target)
A----------------***
B----------------X
C----------------***
Sample Source Data:
Table A:
ColA1
100
200
etc
Table B:
ColB1 ColB2 ColB3
10 Y Ten
20 Y Twenty
30 Y Thirty
etc
Table C:
ColC1 ColC2
11
12
13
etc
Target table (X) should be (just has 1 group INGRP1):
ColA1 ColB1 ColB3 ColC1
100 10 Ten 11
100 10 Ten 12
100 20 Twenty 21
etc
Scenarios:
1. Directly map from A, B, C to X. Unable to map with error message: "API8003: Connection target attribute group is already connected to an incompatible data source. Use a Joiner or Set operator to join the upstream data first before connecting it into this operator."
2. Map each source to Expression Operator and then map from each Expression to target table. I am able to map all attributes successfully but got error when validating it with message: "VLD-1104: Attributes flowing into TEST.EXPR_SRC.INGRP1 have different data sources."
How can I achieve the correct mapping for this purpose?
Use Joiner? I have no key to join the sources
Use Set? The sources have different number of columns
Thanks in advance
Prat

Thanks Nico,
I think it will results data like this:
100 10 Ten 11
200 20 Twenty 12
300 30 Thirty 13
etc
and not the expected:
100 10 Ten 11
100 10 Ten 12
100 20 Twenty 21
etc
But it inspired me to solve this by adding key expression in each source table (B & C) to be joined to table A with this formula:
100+TRUNC(INGRP1.COLB1,-2)
Regards
Prat

JDBC-XI-FILE scenario. How to extract data from multiple tables

Hi,
At this moment I didn't have the access for XI system. So here I have some silly question. Could you please clarify the same ??
If I got to extract data from single table using JDBC adapter I can put the below query in communication channel
SELECT *FROM orders WHERE new='true'.
But if I got to extract data from multiple tables, logic to be used should be like as shown below. ( from previous thread------prabhu).
SELECT <Table_2>.EID, <Table_2>.FName, <Table_2>.LName, <Table_1>.REC_DAT, <Table_1>.DESCRP
FROM <Table_1> INNER JOIN <Table_2> on
<Table_1>.CARDNO = <Table_2>.CARD
where REC_DAT = <condition>
union
SELECT <Table_2>.EID, <Table_2>.FName, <Table_2>.LName, <Table_1>.REC_DAT, <Table_1>.DESCRP
FROM <Table_1> INNER JOIN <Table_2> on
<Table_1>.CARDNO = <Table_2>.CARD
where REC_DAT = <condition>
But my query is ........how to put the above entire code in one line. (i.e in Qery place of communication channel ) ??
Thanks
Kumar

Hi Palnati,
You either use a select query with join or a stored procedure which will contain the logic to extract the data from multiple tables. But, the limitation in case of stored procedure is u can hv only one selct query in it.
You write ur actual query provided in the parameter 'Query SQL Statement". u can also wrt a stored procedure in it. Also, u can provide a update statement in it which will update a certain flag so tht u don selct the data again.
Check the following link
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm</a>
Regards,
Akshay
Message was edited by:
Akshay Salunke

How to insert one table data into multiple tables by using procedure?

How to insert one table data into multiple tables by using procedure?

Below is the simple procedure. Try the below
CREATE OR REPLACE PROCEDURE test_proc
AS
BEGIN
INSERT ALL
INTO emp_test1
INTO emp_test2
SELECT * FROM emp;
END;
If you want more examples you can refer below link
multi-table inserts in oracle 9i
Message was edited by: 000000

How can i Configure JDBC Receiver Adapter to INSERT data in multiple tables

Hi ,
I want to INSERT data in 4 diffrent tables.
Input Data Format is:
<H1>
<d1></d1>
<d2></d2>
</H1>
I want to insert <H1> Header data in particular table & all the details data<D1> in their corresponding table.
Note that Header Can't repeat but Details records are repeating again & again.
Is it possible to write Multiple INSERT STATEMENT in single Data Type.??
I mean to say can we write STATEMENT keyword again & again. if yes HOW ?

Hi
see below links.
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/406642ea59c753e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm
Regards
Chilla..

How to send data from internal table to the shared folder in ABAP

Hi experts,
My requirement is to transfer data from a file to shared folder. i just did reading data from a file to a internal table. Now i want to send this internal table data into a shared folder which is "
xxx\y\z....".
I do not have any idea on how to send data from internal table to the shared folder path.
can anybody please help me out how to do this?
Thanks & Regards
Sireesha.

Where that folder is located, its on presentation server i.e. desktop or application server.
If its on presentation server, use FM GUI_UPLOAD.
If its on application server, then use DATASET functions. Have a look at below link.
[File Handling in ABAP|http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/frameset.htm]
I hope it helps.
Thanks,
Vibha
Please mark all the useful answers

How can i convert the data from mutiple-table to the other database(MSSQL)?

Dears,
How can i convert the data from mutiple-table to the other database such as MS-SQL?
I have a third party system based on MS-SQL 2000.
Now we want to make a integration between SAP R/3(Oracle) and SQL server.
When my user releases the purchase order in R/3, the application we coded will convert the releated data to the temp database on the SQL server.
But i don't know which tools will help me reach the purpose. BAPI, LSMW, IDoc... ???
Would anybody tell me which way is better and how to do?
Thanks a lot!
Kevin Wang

Hello Kevin,
The question to use which method depend on your detail requirements. If you use BAPI, you need to find which Bapi can provide the data you want. Bapi normally use as a function called by external system. So you need to develop an external program like VB/Java to call this Bapi and move it to SQL. LSMW is use when you want to upload data from an external system to SAP. So it does not serve your requirement. Idoc can be use to export data to an external system. Again like Bapi, you need to find what Idoc can provide the data you want. However, it does not any programming from the external system. If I were you, based on your requirements, I think writing an Abap program that read the data you want and download it to NT/SQL server will be faster and easier.

How to select from multiple tables which reside on different data stores ?

Suppose I have two data stores in one TimesTen instance:
1) Datastore A:
table1
2) Datastore B:
table2
I want to make a query like this:
select ... from table1, table2 where table1.colA = table2.colB
Can I ? If not, is there a workaround ?
BTW, because of business, we have to use two or more different datastores, so we can not put table1/table2 in the same datastore.
Thanks very much.

You can query multiple TimesTen databases, but your original question was about joining tables from two databases, which is not supported.
Using Cache Connect to Oracle to query an Oracle database is not distributed. It's still one single Oracle database you are querying. You cannot join a table in the TimesTen database with a table in the Oracle database, this is not allowed.
If you are willing to share your business requiremens, we can take a look and see what solution might work for you. Would you like to discuss this offline?
Susan

Multiple tables with the possibility of multiple records in each table

Post Author: viper
CA Forum: .NET
Hi
I have been trying for a few days now to come up with a CR solution to displaying data from multiple tables. These tables, in some cases, have more then one record that needs to be displayed. This is basically what I am trying to do.....
I am developing a .net web application(vb) using vs2005 and an oracle 10g backend. There is a data entry part of the site that users will enter data related to a property. Other users will be able to search these records and have a list of records returned based on the search criteria. The user then can click on one of these records to view a pop up CR report containing all the data related to that one property. The PropID is passed to the pop up page and is used in the WHERE clause of my SQL statement to bring back only one property. This data can come from as many as 18 tables if all the fields have been entered for this property. I have tried many different solutions to get the data from multiple tables...and have had some that were close to what I need. The best one I have will display data from multiple tables but only one record per table.....which doesn't work in my case since some of the tables have more then one record per table.
Is there anybody that has had success in setting up similar reports?
Does anybody know how I could use the "Group Expert" to group by the tables in my application? I can only figure out how to group within a single table.
It would be great if I could group by table....then just display the record(s) in each table that had the same PropID. I am not sure if the pdf export would show all the data in that situation but it would be worth a try. If fact...maybe I could create a new table called MyTables and just add two colums like MyTableID and MyTableName. Then add all the table names to MyTables that I want to see in the report and add the associated MyTableID value to each table as a new column. I could then group by MyTableID and PropID. Just guessing here.
Any ideas would be appreciated.

Post Author: quafto
CA Forum: .NET
Your query is not too clear so I'll do my best to answer it broadly.
You mentioned that you have a .NET web application where your users enter data on one screen and then may retrieve it on another. If the data is written in real time to a database then you can create a standard Crystal Report by adding multiple tables. The tables should be linked together using the primary and foreign keys in order to optimize the database query and give you a speedy report. Using unlinked tables is not recommended and requires the report engine to index the tables (it is quite slow).
You also mentioned you have a "PropID" to be used in a WHERE clause. This is a great place to use a parameter in your report. This parameter can then be used in your record selection formula inside Crystal Reports. The report engine will actually create the WHERE clause for you based on the parameter value. This is helpful because it allows you to simply concentrate on your code rather than keeping track of SQL queries.
Now, what Crystal does not do well with is uncertainty. When you design a report with X number of tables the report engine expects X number of tables to be available at processing time. You should not surprise the print engine with more or less tables because you could end up with processing errors or incorrect data. You may need to design multiple reports for specific circumstances.
Regarding the group expert question. I'm not sure how you would/could use the group expert to group a table? A table is a collection of fields and cannot be compared to another table without a complex algorithm. The group expert is used to group and sort records based on a field in the report. Have a look at the group expert section of the help file for more information.
Hopefully my comments have given you a few ideas.

Adding data to multiple tables using one form in Access 2010?

Hi All,
I have a access database with two tables and I want to create a single form to enter data into that tables.
How to adding data to multiple tables using one form in Access 2010?
I don't have to much knowledge of access database?
Please help me
Thanks
Balaji

You really don't enter identical data into 2 tables. You enter dat into one single table, and then you have an unique identifier that maps to another table (you have a unique relationship between two tables).
Maybe you need to read this.
http://office.microsoft.com/en-001/access-help/database-design-basics-HA001224247.aspx
Think about it this way... What is you update data in 2 tables, and then the data in one of those tables changes, but the data in the other table does NOT change. WHOOPS!! Now, you've got a BIG problem. For instance, you have a customer
named Bill Gates. In one Table you update Bill's address to 1835 73rd Ave NE, Medina, WA 98039 and in the other table you accidentally update Bill's address to 183 73rd Ave NE, Medina, WA 98039. Now you have 2 addresses for Bill. Why would
you want that??? Which is right? No one knows. If you have one address, you just have to update one address and if there is a mistake, you just have to update one address, but you don't have to waste time trying to figure out which is right
and which is wong...and then update the one that is wrong.
Post back with specific questions.
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

How manuplate data on multiple tables in the oracle resource adapter

Similar Messages

Maybe you are looking for