How o place Flat file Using JMS Adapter.

Hi Frnds,
I have one scenario ,
Sender side i am having IDOC, i want convet the IDOC into Flat file. But my receiver side i have to use only JMS Adapter,
Flat file i have to place in FTP Server using JMS Adapter.
Can ne share your thoughts..
Regards,
raj

Raj,
The below Link will help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50061bd9-e56e-2910-3495-c5faa652b710
Surya,
Welcome Back to SDN.
Regards
Agasthuri Doss

Similar Messages

How to handle empty file using sftp adapter

Hi,
Please explain me how to handle empty files in sftp adapter.
Thanks,
Enivass

Hi Enivaas,
I don't have the seeburger sftp adapter at hand at the moment, but asfar as I remember, this does not specifically have an empty-file handling option like the standard ftp adapter.
So to stop emtyp files from being written, guess would need to handle this at the mapping level. For example, check for target creation criteria in the header node in mapping. If the creation criteria is not met, you can throw an error in mapping.
You may also incorporate this condition in your Receiver determination. In this case, if the condition is not satisfied, no receiver is determined in PI.
Regards

How to put edfact file using b2b adapter

All,
I have to print a edifact file and place it in a certain location using b2b and soa. could you please let me know how this could be done. in the b2b console i could see only listening channels. could this be done directly through b2b adapter or should i use soa adapter.. if either how..
pls guide..
regards
Rakesh

hi Anuj,
i went through the docs
1. the doc with the sample is hard to understand. i opened the composite, but i guess the b2b config changes also needs to be done. they are not clearly mentioned in the doc.
2. cant find details to create outbound adapter in edifact faormat...
you aware of any other links or samples. Also I am new to B2B...
regards
Rakesh

How to load flat file using IP

Hi Experts,
I know that we can use planning function exit in BW-BPS to load the data from flat file(and there is a how to document).
But in IP what is process to load the flat file.becoz when i see into my planning function,type exit is not available.
Any idea.

/people/marc.bernard/blog/2007/11/25/how-to-load-a-file-into-sap-netweaver-bi-integrated-planning-part-1
/people/marc.bernard/blog/2007/11/25/how-to-load-a-file-into-sap-netweaver-bi-integrated-planning-part-2
hope this helps.

Addition of a header line to a flat file using Custom Adapter Module?

Is the header that you want to add to the input file always a constant?
In that case why go for a module. Directly map the required constants during the mapping to your IDoc.
My suggestion is to avoid the module

Hi Shabrish,
The Header is not a constant field always as the value changes per file adapter so a module will be helpful, and it will be a must to add the Header record as the first line.
Can you suggest/direct me to some appropriate blogs? Thanks
Regards,
Nipun

How to get the incoming file name using JMS adapter and SOAP adapter

Hi Everybody,
   In one of my interface i need to get the file name of incoming flat file using JMS adapter at sender side. and then i am using xslt to convert it to IDOC and then posting to SAP IDOC.
my incoming filname are in this form price<DateTimestamp>.txt. when i do the tranformation this incoming file name should be part of one element in the IDOC which i am posting.
EX:
<IDOC
<REF>price<DateTimestamp>.txt</REF>
</IDOC>
Hope it is clear to everybody. I need your suggestion how i can capture this incoming file name and send it as part of IDOC.
Thanks
raj

If they are passing it in message id or correlation id,
you can access it using
<xsl:variable name="dynamic-conf"
        select="map:get($inputparam, 'DynamicConfiguration')" />
    <xsl:variable name="dynamic-key"
        select="key:create('http://sap.com/xi/XI/System/JMS', 'DCJMSMessageID/ DCJMSCorrelationID')" />
    <xsl:variable name="dynamic-value"
        select="dyn:get($dynamic-conf, $dynamic-key)" />
Check this:
http://help.sap.com/saphelp_nw70/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/content.htm
Thanks,
Beena.

Reading huge flat file through SOAP adapter

Hi Everybody,
In one of our interface we need to read big flat file using soap adapter at sender side into xi and we are using java map to convert into xml. but before that i need to split this flat file into multiple files in the first message mapping. and in the second map we have to write a java map to do the flat file conversion to XMLBut i got struck up in reading this big flat file into XI as i need to declare some datatype to read this entire file. Can anybody tell me how i can do this. is it a possible to do first of all with SOAP adapter .
Thanks
raj

hi vijay,
Thanks for your prompt reply. Due to some reasons i am not allowed to use file adapter . i can use only JMS adapter or SOAP adapter. we tried few scenarios with JMS content conversion but what ever scenario i am asking here is complex at multilevel i can't even use JMS in this case. so we are thinking to read whole file using SOAP adapter and then we are planning to split the file into multiple files, as file can be huge size ,using java mapping and in next level we want to use another mapping to do content conversion. SO I have to do experiements whether this is a feasible solution or not. because when u declare at sender side
<ffdata_MT>
<Recordset>
<ROW> String type
when u declare like this and when u sent the flat file using SOAP adapter at sender side we are getting whole file which we sent at part of "ROW" as string. but inside java mapping i need to see whenther i can split this in XI ,so that i can use these split files in next mapping for content conversion. Hope i am clear now. I want to know whether it is a feasible solution or not.
I really appreciate if sombody give some idea on this
Thanks
raj

How to Create a Flat File using FTP/File Adapter

Can any body done workaround on creating the Flat file using FTP/File Adapter?.
I need to create a simple FlatFile either using of delimiter/Fixed length. using the above said adapters we can create XML file, i tried concatinating all the values into a single String and writing into a file, but it does not have proper structure
Can any body help me out on this..
Thanks
Ram

You can create a text schema while creating a File Adapter. If schema is specified for File Adapter, it takes care of converting XML into fixed length or delimited format.
Thanks,
-Ng.

How to extract data from Essbase to Flat File using ODI

Hi,
Anyone know how to extract data from Essbase to Flat File using ODI?
Thanks in advance.
Regards,
Sumardi

Hi,
Have you read through :-
Oracle Data Integrator Adapter for Hyperion Essbase Getting Started - http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/odiess_getting_started.pdf
Oracle Data Integrator Adapter for Hyperion Essbase User's Guide - http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/odiess_users.pdf
If you have read them and are still have a problem at what stage are you having the issues?
Cheers
John
http://john-goodwin.blogspot.com/

How to get field separator in flat file using GUI_DOWNLOAD function

hi,
how to get field separator in flat file using GUI_DOWNLOAD function.
                                thanking you.

Hi,
Use WRITE_FIELD_SEPARATOR = 'X'.
Check this sample code
REPORT z_file_download.
DATA: w_name(90) TYPE c.
DATA:
BEGIN OF fs_flight,
    carrid   LIKE sflight-carrid,
    connid   LIKE sflight-connid,
    fldate   LIKE sflight-fldate,
    price    LIKE sflight-price,
    currency LIKE sflight-currency,
END OF fs_flight.
DATA:
BEGIN OF fs_head,
    carrid(10) TYPE c,
    connid(10) TYPE c,
    fldate(10) TYPE c,
    price(10) TYPE c,
    curr(10) TYPE c,
END OF fs_head.
DATA:
t_head LIKE
   TABLE OF
         fs_head.
DATA:
t_flight LIKE
     TABLE OF
           fs_flight.
fs_head-carrid = 'CARRID'.
fs_head-connid = 'CONNID'.
fs_head-fldate = 'FLDATE'.
fs_head-price = 'PRICE'.
fs_head-curr   = 'CURRENCY'.
APPEND fs_head TO t_head.
SELECT-OPTIONS:
s_carrid FOR fs_flight-carrid.
START-OF-SELECTION.
SELECT carrid
         connid
         fldate
         price
         currency
    FROM sflight
    INTO TABLE t_flight
   WHERE carrid IN s_carrid.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
*   BIN_FILESIZE                  =
    filename                      = 'D:\flight.xls'
   FILETYPE                      = 'ASC'
*   APPEND                        = ' '
    WRITE_FIELD_SEPARATOR         = 'X'
*   HEADER                        = '00'
*   TRUNC_TRAILING_BLANKS         = ' '
*   WRITE_LF                      = 'X'
*   COL_SELECT                    = ' '
*   COL_SELECT_MASK               = ' '
*   DAT_MODE                      = ' '
*   CONFIRM_OVERWRITE             = ' '
*   NO_AUTH_CHECK                 = ' '
*   CODEPAGE                      = ' '
*   IGNORE_CERR                   = ABAP_TRUE
*   REPLACEMENT                   = '#'
*   WRITE_BOM                     = ' '
* IMPORTING
*   FILELENGTH                    =
tables
    data_tab                      = t_head
EXCEPTIONS
   FILE_WRITE_ERROR              = 1
   NO_BATCH                      = 2
   GUI_REFUSE_FILETRANSFER       = 3
   INVALID_TYPE                  = 4
   NO_AUTHORITY                  = 5
   UNKNOWN_ERROR                 = 6
   HEADER_NOT_ALLOWED            = 7
   SEPARATOR_NOT_ALLOWED         = 8
   FILESIZE_NOT_ALLOWED          = 9
   HEADER_TOO_LONG               = 10
   DP_ERROR_CREATE               = 11
   DP_ERROR_SEND                 = 12
   DP_ERROR_WRITE                = 13
   UNKNOWN_DP_ERROR              = 14
   ACCESS_DENIED                 = 15
   DP_OUT_OF_MEMORY              = 16
   DISK_FULL                     = 17
   DP_TIMEOUT                    = 18
   FILE_NOT_FOUND                = 19
   DATAPROVIDER_EXCEPTION        = 20
   CONTROL_FLUSH_ERROR           = 21
   OTHERS                        = 22
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      filename                = 'D:\flight.xls'
      filetype                = 'ASC'
      append                  = 'X'
      write_field_separator   = 'X'
    TABLES
      data_tab                = t_flight
    EXCEPTIONS
      file_write_error        = 1
      no_batch                = 2
      gui_refuse_filetransfer = 3
      invalid_type            = 4
      no_authority            = 5
      unknown_error           = 6
      header_not_allowed      = 7
      separator_not_allowed   = 8
      filesize_not_allowed    = 9
      header_too_long         = 10
      dp_error_create         = 11
      dp_error_send           = 12
      dp_error_write          = 13
      unknown_dp_error        = 14
      access_denied           = 15
      dp_out_of_memory        = 16
      disk_full               = 17
      dp_timeout              = 18
      file_not_found          = 19
      dataprovider_exception = 20
      control_flush_error     = 21
      OTHERS                  = 22.
IF sy-subrc EQ 0.
    MESSAGE 'Download successful' TYPE 'I'.
ENDIF.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

How to Set JMS property and Read JMS property in BPEL using JMS adapter

Does any one know how to set or read more than one JMS property in BPEL using JMS adapter. My queue server is Oracle JMS server.
Any help and sample is well appreciated

Hi Van
I have noted that only the attribute "type" is missing. It seems that when you create a "string" property, the attribute "type" is droped from the XML. If you use another type (as "integer" or "double") it stays there.
If you try to read your properties, except for the "type" attribute, you should be successful, as I am. If you need, please tell me your email, I can send you my code.
Source Code:
in ASSIGN activity (process which SENDS the JMS message):
<assign name="TESTES">
<copy>
     <from expression="'string'"/>
     <to variable="HeaderJms" part="outboundHeader"
     query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties/ns5:Property[1]/@type"/>
</copy>
<copy>
     <from expression="'name'"/>
     <to variable="HeaderJms" part="outboundHeader"
     query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties/ns5:Property[1]/@name"/>
</copy>
<copy>
     <from expression="'value1'"/>
     <to variable="HeaderJms" part="outboundHeader"
     query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties/ns5:Property[1]/@value"/>
</copy>
<bpelx:append>
     <bpelx:from>
     <Property name="" type="" value=""
          xmlns="http://xmlns.oracle.com/pcbpel/adapter/jms/"/>
     </bpelx:from>
     <bpelx:to variable="HeaderJms" part="outboundHeader"
          query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties"/>
</bpelx:append>
<copy>
     <from expression="'string'"/>
     <to variable="HeaderJms" part="outboundHeader"
     query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties/ns5:Property[2]/@type"/>
</copy>
<copy>
     <from expression="'name2'"/>
     <to variable="HeaderJms" part="outboundHeader"
     query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties/ns5:Property[2]/@name"/>
</copy>
<copy>
     <from expression="'value2'"/>
     <to variable="HeaderJms" part="outboundHeader"
     query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties/ns5:Property[2]/@value"/>
</copy>
</assign>
in ASSIGN activity (process which READS the JMS message)
<assign name="Assign_1">
<copy>
<from variable="Variable_1" part="inboundHeader"
query="/ns3:JMSInboundHeadersAndProperties/ns3:JMSInboundProperties/ns3:Property[10]/@name"/>
<to variable="temp"/>
</copy>
<copy>
<from variable="Variable_1" part="inboundHeader"
query="/ns3:JMSInboundHeadersAndProperties/ns3:JMSInboundProperties/ns3:Property[10]/@value"/>
<to variable="temp"/>
</copy>
<copy>
<from variable="Variable_1" part="inboundHeader"
query="/ns3:JMSInboundHeadersAndProperties/ns3:JMSInboundProperties/ns3:Property[12]/@name"/>
<to variable="temp"/>
</copy>
<copy>
<from variable="Variable_1" part="inboundHeader"
query="/ns3:JMSInboundHeadersAndProperties/ns3:JMSInboundProperties/ns3:Property[12]/@value"/>
<to variable="temp"/>
</copy>
</assign>
Note that I do not try to read the "type" attribute, otherwise it will fail.
Here is the JMS Header Message received:
<inboundHeader>
<JMSInboundHeadersAndProperties xmlns="http://xmlns.oracle.com/pcbpel/adapter/jms/">
<JMSInboundHeaders>
<JMSCorrelationID>
bpel://localhost/pi_lms-c001e/BpelPiAtualizacaoC001E~1.0/3200025-BpInv0-BpSeq1.6-2
</JMSCorrelationID>
<JMSDeliveryMode>2</JMSDeliveryMode>
<JMSExpiration>0</JMSExpiration>
<JMSMessageID>ID:467DFA1FA1ED459EBF37F51F596C3F12</JMSMessageID>
<JMSPriority>4</JMSPriority>
<JMSRedelivered>false</JMSRedelivered>
<JMSType>com.mercurio.lms.integration.c001eip.c001EIntegrationPoint</JMSType>
<JMSTimestamp>1201552046253</JMSTimestamp>
</JMSInboundHeaders>
- <JMSInboundProperties>
<Property name="JMSXDeliveryCount" type="integer" value="1"/>
<Property name="JMSXRecvTimestamp" type="long" value="1201552046698"/>
<Property name="JMSXUserID" value="lms_dev_int_v1_user"/>
<Property name="JMS_OracleDeliveryMode" value="2"/>
<Property name="JMS_OracleTimestamp" type="long" value="1201552046253"/>
<Property name="JMS_OracleDelay" type="long" value="0"/>
<Property name="JMSXState" type="integer" value="0"/>
<Property name="IAS_VERSION" value="10.1.3"/>
<Property name="JMS_OracleDeliveryMode" value="2"/>
<Property name="name" value="value1"/> ("type" attribute was droped!!!)
<Property name="JMS_OracleTimestamp" type="long" value="1201552046253"/>
<Property name="name2" value="value2"/> ("type" attribute was droped!!!)
</JMSInboundProperties>
</JMSInboundHeadersAndProperties>
</inboundHeader>
Regards
Marcelo

How to Set corrid using JMS adapter in ESB while inserting the data in JMS

Hello all,
Can any one help me in setting the corrid using JMS adapter in ESB.
I haven't been able to find any clues.
We can do this in BPEL but my adapter is in ESB and i have no idea how this can be done in ESB.
Your help is highly appreciated.
Thanks,
Saurav
Edited by: sauravsingla on Oct 7, 2009 10:46 AM

hi
you could do this from and xsl transformatuion by use of the .. function
see :
http://biemond.blogspot.com/2008/02/esb-adapter-failover.html
http://kr.forums.oracle.com/forums/thread.jspa?threadID=658502 (comment of AmitSoaDev, he sets correlationid too)
hope this helps, gl

How to pass a filename to MQHRF2 header in IBM MQ using JMS Adapter in SAP PI

Hi Expers,
Can you please help on ...
how to pass a filename to MQHRF2 header in IBM MQ using JMS Adapter in SAP PI
Thanks,
Chandar

Hi Chandar,
Could you check the following post Re: Inserting custom header fields inside MQRFH2 (JMS Receiver adapter)?
I hope you find it useful.
Regards!

How to read pdf file using file adapter

Hi..
How to read pdf file using file adapter?
regards
Arun

Hi
This may help you
/people/sap.user72/blog/2005/07/27/xi-generate-pdf-file-out-of-file-adapter
/people/alessandro.guarneri/blog/2007/02/21/sap-xi-acting-as-a-huge-file-mover
---Ram

Same file name using JMS adapter on sender side.

Hi Friends,
I got a requirement to capture file name using JMS adapter on the sender side.
Can some one help me in resolving this issue.
Regards,
Jeevan.

Hi ,
You can use Dynamic Configuration in mapping.
Create a UDF with input as file name and copy/paste this code
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
//conf.removeAll();
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
//String filename= conf.get(key);
conf.put(key, fileName);
key= null;
return fileName;
Thanks.

How o place Flat file Using JMS Adapter.

Similar Messages

Maybe you are looking for