How scores distributed in equal weightage for all subcriteria in vendoreval

Dear all,
Kindly tell me how the scores are distributed in vendor evaluation for all the sub criterias.. like for price level , price behaviour
because in ME63 output I got 40,40 always but for some vendor i got 45,46 like this ... what is the reason for that and how exactly it is configured. kindly give the details
Regards,
Saurav

Have you follow all this checking ?
If you think that you already follow all the steps, but the value is not as per your config, you can raise ticket to SAP about it.
But I suggest you to double check your computation.
To determine a vendor's price level, the system compares the vendor's effective price with the market price for the material.
   1. The system first checks whether the buyer has maintained a market price for the material or the material group.
   2. If not, the system calculates the market price which is equal to the average of the effective prices for all vendors supplying this material. Prices from purchase orders and prices for subcontracting are dealt with separately.
   3. The system then applies the effective price for the vendor from the conditions.
   4. The vendor's effective price is then compared with the market price and the percentage variance determined.
   5. The system then assigns a score to the variance in accordance with the settings made in Customizing.
   6. This score is valid for the material, that is, at info record level. Since the score the vendor receives for a subcriterion is based not on an individual material, but on the total of all the materials he supplies, the following steps are necessary:
   7. The system repeats the comparison between effective price and market price for each of the vendor's materials.
   8. The system calculates an average from the sum of the scores determined. This average represents the vendor's score for the subcriterion Price Level.
Edited by: w1n on Apr 19, 2010 2:35 PM

Similar Messages

Deployment Optimizer - Equal weightage for all the locations in the network

Hello All,
I am having difficulty in assigning equal weightage for all the locations in the deployment network. My scenario is as described below:
Deployment Source location: LOC1
Destination locations: LOC2, LOC3
I am running Heuristics to plan LOC2, LOC3 & LOC1, followed by
a Deployment Optimizer run at LOC1 to deploy to LOC2 & LOC3.
ATD quantity at LOC1 is always calculated after saftisfying the requirements at LOC1 and the remainder is deployed to LOC2 & LOC3 based on the cost settings. This seems to be the case even if I don't run the heuristics at LOC1 and start deployment optimizer after running the heuristics at LOC2 and LOC3.
The need at this client place is that all three locations are equally important even though LOC1 is the only deploying source location.
This applies for all demand categories i.e. Sales orders, Forecast and forecast at all the three locations.
I would appreciate if anybody has done this kind of configuration before and let me know how to model this.
Thanks,
Venkat

Have you follow all this checking ?
If you think that you already follow all the steps, but the value is not as per your config, you can raise ticket to SAP about it.
But I suggest you to double check your computation.
To determine a vendor's price level, the system compares the vendor's effective price with the market price for the material.
   1. The system first checks whether the buyer has maintained a market price for the material or the material group.
   2. If not, the system calculates the market price which is equal to the average of the effective prices for all vendors supplying this material. Prices from purchase orders and prices for subcontracting are dealt with separately.
   3. The system then applies the effective price for the vendor from the conditions.
   4. The vendor's effective price is then compared with the market price and the percentage variance determined.
   5. The system then assigns a score to the variance in accordance with the settings made in Customizing.
   6. This score is valid for the material, that is, at info record level. Since the score the vendor receives for a subcriterion is based not on an individual material, but on the total of all the materials he supplies, the following steps are necessary:
   7. The system repeats the comparison between effective price and market price for each of the vendor's materials.
   8. The system calculates an average from the sum of the scores determined. This average represents the vendor's score for the subcriterion Price Level.
Edited by: w1n on Apr 19, 2010 2:35 PM

How accurate is the notation feature for all of you??

how accurate is the notation feature for all of you??
thanks

Hi,
what I normally do when I'm making a score, is that I quantize the part I recorded to, say, 1/16th. If I play the quantized part, it should sound exactly what I intended. If not, I make corrections. This way, I'm pretty sure that the interpretation of the score window will be pretty accurate. Otherwise, the score could interprete a note that's a bit too early or a bit too late as a 1/32 note, and make a mess of the notes.
When playing full piano scores, make sure to play as simple as possible, because embellishments also make messier scores.
Kind regards,
Jaap

My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested. How can there be audio issue for all these devices at the same time?
As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
Peace,
P. Dreadie

How to update managed metadata column for all file in document library using powershell

Hi,
How to update managed metadata column for all file in document library using powershell?
Any help on it.
Thanks & REgards
Poomani Sankaran

Hi TanPart,
I have changed the code which you have give in order to get the files from SharePoint 2010 Foundation Document Library.But i am getting below error in powershell.
Property 'ListItemCollectionPosition' cannot be found on this object; make sure it exists and is settable.
Could you tell me which is the issues in it?
See the code below.
$web = Get-SPWeb http://ntmoss2010:9090/Site
$list = $web.Lists["DocLib"]
$query = New-Object Microsoft.SharePoint.SPQuery
$query.ViewAttributes = "Scope='Recursive'";
$query.RowLimit = 2000
$caml = '<Where><Contains><FieldRef Name="Title" /><Value Type="Text">Process Documents/Delivery</Value></Contains></Where>' +
        '<OrderBy Override="TRUE"><FieldRef Name="ID"/></OrderBy>'
$query.Query = $caml
do
    $listItems = $list.GetItems($query)
    $spQuery.ListItemCollectionPosition = $listItems.ListItemCollectionPosition
    foreach($item in $listItems)
        #Cast to SPListItem to avoid ambiguous overload error
        $spItem = [Microsoft.SharePoint.SPListItem]$item;
        Write-Host $spItem.Title
while ($spQuery.ListItemCollectionPosition -ne $null)
Thanks & Regards
Poomani Sankaran

Hi, While installing XQuatrz-2.7.7, the installation blocks at the "destination" level. It asks how to install this soft, "Install for all users" is shadowed, but frozen: i cannot select anything and move on. Any idea how to get that fixed? Thanks!

Hi,
While installing XQuatrz-2.7.7, the installation blocks at the "destination" level. It asks how to install this soft, "Install for all users" is shadowed, but frozen: i cannot select anything and move on. Any idea how to get that fixed?
Thanks!

It says above 2 relevant and 1 correct answere available .............
I'm new here so could anyone direct me to these answeres?

My nodejs and php component is ready but how will we insert in eloqua for all users?

Hi there,
my nodejs and php component is ready but how will we insert in eloqua for all users?
Thanks

Hi there,
Please help me.

How to make saved IR available for all users

Hi,
I've created IR and saved it to several tabs based on search conditions.
But they're only visible for developers.
How to make these tabs available for all end-users ?
Does version 4.0 support this option ?
Thank you!

Hi
At present this feature is not included, although I believe it may be in 4.0. Many people have provided workarounds for this. None of which I have tried. I cannot find the original thread but here is a solution from a chap called Ruud
>
One way to share your saved reports with others is to 'Publish' your report settings to a few intermediate tables in your application and have other users 'Import' your settings from there. The reason for using intermediate tables is so that not all your saved reports need to be 'visible' to other users (only those that you've chosen to publish).
Basically you have available the following views and package calls that any APEX user can access:-
- flows_030100.apex_application_pages (all application pages)
- flows_030100.apex_application_page_ir_rpt (all saved reports - inclusing defaults and all user saved reports)
- flows_030100.apex_application_page_ir_cond (the associated conditions/filters for above saved reports)
- wwv_flow_api.create_worksheet_rpt (package procedure that creates a new saved report)
- wwv_flow_api.create_worksheet_condition (package procedure that creates a condition/filter for above saved report)
The way I've done it is that I've created 2 tables in my application schema that are straightforward clones of the 2 above views.
CREATE TABLE user_report_settings AS SELECT * FROM flows_030100.apex_application_page_ir_rpt;
CREATE TABLE user_report_conditions AS SELECT * FROM flows_030100.apex_application_page_ir_cond;
( NB. I deleted any contents that may have come across to make sure we start with a clean slate. )
These two tables will act as my 'repository'.
To simplify matters I've also created 2 views that look at the same APEX views.
CREATE OR REPLACE VIEW v_report_settings AS
SELECT r.*
p.page_name
FROM flows_030100.apex_application_page_ir_rpt r,
flows_030100.apex_application_pages p
WHERE UPPER ( r.application_name ) = <Your App Name>
AND r.application_user 'APXWS_DEFAULT'
AND r.session_id IS NULL
AND p.application_id = r.application_id
AND p.page_id = r.page_id;
CREATE OR REPLACE VIEW v_report_conditions AS
SELECT r.*
p.page_name
FROM flows_030100.apex_application_page_ir_cond r,
flows_030100.apex_application_pages p
WHERE UPPER ( r.application_name ) = <Your App Name>
AND r.application_user 'APXWS_DEFAULT'
AND p.application_id = r.application_id
AND p.page_id = r.page_id;
I then built 2 screens:-
1) Publish Report Settings
This shows 2 report regions:-
- Region 1 - Shows a list of all your saved reports from V_REPORT_SETTINGS (filtered to only show yours)
SELECT apex_item.checkbox ( 1, report_id ) " ",
page_name,
report_name
FROM v_report_settings
WHERE application_user = :APP_USER
AND ( page_id = :P27_REPORT OR :P27_REPORT = 0 )
ORDER BY page_name,
report_name
Each row has a checkbox to select the required settings to publish.
The region has a button called PUBLISH (with associated process) that when pressed will copy the settings from
V_REPORT_SETTINGS (and V_REPORT_CONDITIONS) into USER_REPORT_SETTINGS (and USER_REPORT_CONDITIONS).
- Region 2 - Shows a list of already published reports in table USER_REPORT_SETTINGS (again filtered for your user)
SELECT apex_item.checkbox ( 10, s.report_id ) " ",
m.label,
s.report_name
FROM user_report_settings s,
menu m
WHERE m.page_no = s.page_id
AND s.application_user = :APP_USER
AND ( s.page_id = :P27_REPORT OR :P27_REPORT = 0 )
ORDER BY m.label,
s.report_name
Each row has a checkbox to select a setting that you would like to delete from the repository.
The region has a button called DELETE (with associated process) that when pressed will remove the selected
rows from USER_REPORT_SETTINGS (and USER_REPORT_CONDITIONS).
NB: P27_REPORT is a "Select List With Submit" to filter the required report page first.
Table MENU is my application menu table where I store my menu/pages info.
2) Import Report Settings
This again shows 2 report regions:-
- Region 1 - Shows a list of all published reports in table USER_REPORT_SETTINGS (filtered to show only other users saved reports)
SELECT apex_item.checkbox ( 1, s.report_id ) " ",
m.label,
s.report_name,
s.application_user
FROM user_report_settings s,
menu m
WHERE m.page_no = s.page_id
AND s.application_user :APP_USER
AND ( s.page_id = :P28_REPORT OR :P28_REPORT = 0 )
ORDER BY m.label,
s.report_name,
s.application_user
Each row has a checkbox to select the setting(s) that you would like to import from the repository.
The region has one button called IMPORT that when pressed will import the selected settings.
It does this by using the 2 above mentioned package procedure to create a new saved report for you
with the information form the repository. Be careful to match the right column with the right procedure
parameter and to 'reverse' any DECODEs that the view has.
- Region 2 - Shows a list of all your saved reports from V_REPORT_SETTINGS (filtered to only show yours)
SELECT page_name,
report_name
FROM v_report_settings
WHERE application_user = :APP_USER
AND ( page_id = :P28_REPORT OR :P28_REPORT = 0 )
ORDER BY page_name,
report_name
This is only needed to give you some feedback as to whether the import succeeded.
A few proviso's:-
a) I'm sure there's a better way to do all this but this works for me :-)
b) This does not work for Computations! I have not found an API call to create computations.
They will simply not come across into the repository.
c) If you import the same settings twice I've made it so that the name is suffixed with (2), (3) etc.
I did not find a way to update existing report settings. You can only create new ones.
d) Make sure you refer to your saved reports by name, not ID, when matching APEX stored reports and the
reports in your repository as the ID numbers may change if you re-import an application or if you
auto-generate your screens/reports (as I do).
Ruud
>
To me this is a bit too much of a hack and I personally wouldn't implement it - it's just an example to show it can be done.
Also if you look here in the help in APEX Home > Adding Application Components > Creating Reports > Editing Interactive Reports
...and go to the last paragraph, you can embed predicates in the URL.
Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;)
Edited by: Munky on Jul 30, 2009 8:03 AM

How to make warehouse field inactive for all users in all documents autom.

Hi All,
Can anyone pls tell me "**how to make warehouse field inactive for all users in all documents without having to do it through form setting** "for each and every user. It should be visible but inactive
Thanks & Regards,
Mukesh Agrawal

Hi,
As a work around create a warehouse SelectWH and map the mandatory acoounts as a On hold account(in chart of accounts).So there will not be any posting on this account.
And set this warehouse as default warehouse for all users.
So without selecting the appropriate warehouse the user can not add the document.
I think this might resolve you issue.

How can I change view options for ALL playlists?

How can I change view options for ALL playlists? With one single click or trick?
I have a lot playlists and don't want to change every single one of them separatly.
Thanks for your help. (I use Windows 7)

There's no FAST way I know of, which is what I think you mean.
Only the painful SLOW way of one-by-one.
You could make a new playlist from the main library after you've set the columns up as you like.
Go to an existing playlist that doesn't have the columns you want, and select all.
RIght-click > Add to Playlist and send them to the new playlist.
That's still one-by-one and only works with static playlists, not smart ones.

How can I change the duration for all clips in iMovie 10.2

How can I change the duration for all clips in iMovie 10.2? I'm used to working in the older version of iMovie where all I had to do was click on the gear on the clip and change the duration. ALso could use the tool bar to set the duration for all clips. Can't figure out how to do that in this new version. Any suggestions would be appreciated.

In the timeline select the clip whose duration you want to change. Click the adjust button at the top of the viewer and then click the i button and you can set the duration. For multiple clips select them all and in the i button type in the duration you want and it will be applied to all the selected clips. You can also change the duration of a clip in the timeline by putting the cursor over the beginning or end of a clip and dragging. A popup will show the new duration.

How I can allow always and for all sites full-screen mode?

How I can allow always and for all sites full-screen mode?
And I want choose anywhere option "never show notification about full-screen mode" (screenshot attached)
RUS
Как я могу всегда разрешить и для всех сайтов полноэкранный режим?
И я хочу выбрать где-нибудь опцию "никогда не показывать уведомление о полноэкранном режиме" (скриншот приложен)

There is a preference setting on the <b>about:config</b> page that is meant for developers and testers to make this possible, but it is not meant for normal users.
*full-screen-api.approval-required = false
You can open the <b>about:config</b> page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config

Equal opportunities for all queues

Hi!
My application receives messages from several queues. I use separate MyListener instance for every queue. I synchronized the onMessage method on static Object, so only one message from all queues is processed in given moment:
MyListener implements MessageListener
static Object object;
onMessage (Message message)
synchronized (object)
//process
Do the "synchronized" and "onMessage" promise equal opportunities for all input queues? Can you give a link to relevant documentation?

According to the JMS specification, a session is a single threaded context that shields applications from worrying about thread safety. So if you create all the queue receivers from the same session, you shouldn't need to synchronize onMessage. To promote equal opportunities, you'll want to synchronize as little as possible - but this is really a JMS implementation issue and you'll probably need to experiment a little to find out if any starvation occurs.
- Bjarne.

How do I run a search for all photos on my iMAc?

How do I run a search for all photos on my iMAc?
Looking for something like search assistant...
actually on an Ext Hard drive.

open a finder window by clicking on mr. smiley face and then click on ALL PHOTO's on the bottom right

How to apply common View criteria for all LOV View programatically?

Hi,
In my application I use nearly 100 VOs, which will be mapped as LOV to some base VOs. These VOs are not only for LOV but also will be used directly in screen as read-only table. All these VOs contains EFF_BGN_DTand EFF_END_DT. Requirement is to display only the active records in VO.
We don't want to crete view criteria at design time for each and every VO. Instead we want to have a base ViewObjectImpl class, create at runtime and add this common criteria with the existing view criterias (If any given, which are actually required for the developer for screen specific functionality).
NOTE: As all of our VOs are custom java data source implemented and none of them have queries, we cannot use whereclause API but only ViewCriteria.
We want to create a view criteria, that somewhat looks like the below condition.
           (     (TO_CHAR( EffBgnDt, 'yyyy-mm-dd') <= '2010-02-01' )
             AND (TO_CHAR( EffEndDt, 'yyyy-mm-dd') >= '2010-02-01' )
             OR
           (     (TO_CHAR( EffBgnDt, 'yyyy-mm-dd') <= '2010-02-01' )
             AND (EffEndDt IS NULL )
           )Question:
1. Which is the best place in ViewObject class, where I will be able to create common view criteria, include it with existing criterias.
Thanks in Advance.
Raghu

No it is not working. I've tested. When i test your implementation in my sample using AM tester, it is not at all going inside getCriteriaItemClause(ViewCriteriaItem pViewCriteriaItem). For example when i say, AM.findViewObject(String ViewObjectName), followed by getEstimatedRowCount(), it should apply common filter criteria and give me the result.
Given below required scenario:
Department table:
ID     DEPT_NAME     START_DATE     END_DATE
1     Hr          1-Jan-2010
2     Purchasing     1-Jan-2010     31-Dec-2010
3     Shipping             1-Jan-2010     31-Dec-2055
4     Sales          1-Jan-2010
Common criteria to be applied (Programatically) : :bind_current_date between StartDate and EndDate or :bind_current_date >= StartDate and EndDate is null
VO specific view criteria (may vary VO to VO): DeptName not equal to 'Sales'
Expected Result:
Case 1:
         a. DeptView = AM.findViewObject("DepartmentVO")
         b. DeptView.getEstimatedRowCount()
          It should give me 3 records (Hr, Shipping, Sales)
Case 2:
         a. DeptView = AM.findViewObject("DepartmentVO")
         b. Create View Criteria 'NotSalesDeptVC', which should not list out Sales department.
         c. Apply NotSalesDeptVC using RowSet rowSet = (RowSet) this.findByViewCriteria(NotSalesDeptVC, -1, ViewObject.QUERY_MODE_SCAN_VIEW_ROWS)
         d. rowSet.getEstimatedRowCount()
          It is in-memory filtering, will not disturb the default rowset, should give me 2 records (Hr, Shipping)
Case 3:
         a. DeptView = AM.findViewObject("DepartmentVO")
         b. Apply 'NotSalesDeptVC' to the default row set, followed by executeQuery
         c. DeptView.getEstimatedRowCount()
          It should give me 2 records. (Hr, Shipping)
Case 4:
         a. DeptView = AM.findViewObject("DepartmentVO")
         b. Unapply the applied 'NotSalesDeptVC', followed by executeQuery
         c. DeptView.getEstimatedRowcount()
          It should give me 3 records (Hr, Shipping, Sales)Essence is at any point of time, User should always work with active records. He no need to write extra logic to retrieve only the active records but the base Viewobject impl should have. Note, All of my view objects are custom java data source implemented and not query based. Similarly it does not meant that all of my VOs will be having some business specific View criteria. Some VOs may have. Some VOs may not have. However basic active records criteria is applicable for all VOs

How scores distributed in equal weightage for all subcriteria in vendoreval

Similar Messages

Maybe you are looking for