How to access Cotnet Services Webdav with anonymous?

How to access Cotnet Services Webdav with anonymous?

See the section entitled 'Enabling the Ability to Grant Public Access' inthe Content Services administrators guide. Once you have granted public access to a document you will not need to authenticate to access it.
regards,
-sancho

Similar Messages

  • How to accessing portal services

    Hi All
             I am saravanan. i have doubts. Can u plz solve my doubts?.
    1). How to Accessing Portal Services from a Webdynpro application?.
    2). Portal Eventing with Webdynpro and other Applications?.
    3). single signon from Webdynpro applications?.
         These are my doubts. Could u plz solve my problem.
    If u have any material or PPT or PDF files kindly send my mail.
    This is my mail id : [email protected]
    Thanking You
    Saravanan

    Hi Swathi
    I'm trying to do exactly the same, i have a webdynpro application and i'm trying to access KM libraries to get the full list of metadata properties. But i'm getting and error while trying to get the service on the following code:
    Property propertyAux = null;
    IResourceFactory resFactory = ResourceFactory.getInstance();
    IRepositoryServiceFactory serFactory = resFactory.getServiceFactory();
    IPropertyConfigurationService propConfigService = (IPropertyConfigurationService) serFactory.getService("PropertyConfigurationService");
    IMetaNameListIterator i = propConfigService.getMetaModel().nameIterator();
         while (i.hasNext()) {
         IMetaName metaname = i.next();
         if ( metaname.getDocumentPatterns()!= null){
         propertyData.setId(metaname.getName());
         propertyData.setName(metaname.getLabel(locale));
         propertyData.setNamespace(metaname.getNamespace());
         propertyData.setDescription(metaname.getDescription(locale));
         propertyList.add(propertyData);
    The error on the trace is this one:
    System.err#sap.com/KmmsListEAR#System.err#Guest#2####30a27fa0cbfa11dbace30018de0545f1#SAPEngine_Application_Thread[impl:3]_29##0#0#Error##Plain###Configuration Framework error: unable to create an IConfigClientContext instance from an EP5 userInitialConfigException: The configuration service locator could not be initialized for any of the environments. The configuration framework is not available.#
    System.err#sap.com/KmmsListEAR#System.err#Guest#2####30a27fa0cbfa11dbace30018de0545f1#SAPEngine_Application_Thread[impl:3]_29##0#0#Error##Plain###InitialConfigException: The configuration service locator could not be initialized for any of the environments. The configuration framework is not available.
    Could you please give me a hand on this one?
    Thanks in advance

  • How to access search service api to get results in JSON format?

    How to access search service api to get results in JSON format in asp.net web application outside SharePoint farm. It should be an app or SharePoint hosted.
    I have tried the same with the help of "http://dotnetmafia.com/blogs/dotnettipoftheday/archive/2013/04/09/how-to-query-sharepoint-2013-using-rest-and-javascript.aspx".
    function onQuerySuccess(data) {
        var results = data.d.query.PrimaryQueryResult.RelevantResults.Table.Rows.results;
        $("#resultsDiv").append('<table>');
        $.each(results, function () {
            $("#resultsDiv").append('<tr>');
            $.each(this.Cells.results, function () {
                $("#resultsDiv").append('<td>' + this.Value + '</td>');
            $("#resultsDiv").append('</tr>');
        $("#resultsDiv").append('</table>');
    But we are getting data.d as undefined.
    I have checked and verify that I am getting success and data in XML format not in JSON. As I expected the JSON. Although I have specified the "JSON" in headers " headers:
    { "Accept": "application/json;
    odata=verbose" } ". 
    Thanks

    Hi,
    Per my understanding, you might want to access search service REST API and get results in JSON format using jQuery.
    The code you use is working in a SharePoint Hosted App project, to compose a working code snippet easier, you can take the demo below for a try:
    <script type="text/javascript" src="http://code.jquery.com/jquery-1.10.2.min.js"></script>
    <script type="text/javascript">
    _spBodyOnLoadFunctionNames.push("ready");
    function ready()
    var spAppWebUrl = _spPageContextInfo.webAbsoluteUrl;
    var queryUrl = spAppWebUrl + "/_api/search/query?querytext='book'";
    $.ajax({
    url: queryUrl,
    method: "GET",
    headers: { "Accept": "application/json; odata=verbose" },
    success: function (data) {
    console.log(data);
    var results = data.d.query.PrimaryQueryResult.RelevantResults.Table.Rows.results;
    $.each(results, function () {
    $.each(this.Cells.results, function () {
    console.log(this.Key+"--"+this.Value);
    error: function (data) {
    console.log(data);
    </script>
    Add the code into a page of your site, it will retrieve JSON format data and print the search result in the console of browser.
    More information about how to work with SharePoint Hosted App:
    https://msdn.microsoft.com/en-us/library/office/fp142379.aspx
    If you want to call the search service REST API in a remote environment, authentication is required to be taken into consideration, the link below with a working demo
    would be helpful:
    https://pholpar.wordpress.com/2013/05/11/accessing-office-365-sharepoint-sites-using-rest-from-a-local-html-javascript-host/
    Best regards
    Patrick Liang
    TechNet Community Support

  • How to create Web Service Proxy with help of WSDL.

    Hi ,
    How to create Web Service Proxy with help of WSDL .
    Please help me .
    Thanks in advacne for reply .

    check out this article. It has all the details
    http://www.oracle.com/technology/products/jdev/howtos/1013/wsadf/adfcomplexwstypes.html

  • I have an Ipad, I activated the time capsule with no issues. I added the airport Utility application without issue.  However, I do not know how to access the hard drive with either my Windows computer or the Ipad.  Does someone know how?

    I have an Ipad, I activated the time capsule with no issues. I added the airport Utility application without issue.  However, I do not know how to access the hard drive with either my Windows computer or the Ipad.  Does someone know how?

    On windows load the airport utility .. latest correct version as possible.. there is no windows 8 but win7 works after a fashion.
    Make sure the TC is using SMB compatible names.. short no spaces and pure alphanumeric.
    Type the name directly into windows explorer.
    \\TCname or \\TCIPaddress
    If no luck turn off all the firewalls.. internal windows plus security software plus whatever other gargyoles and other rubbish AV software you have running.
    Ensure windows is able to at least ping the TC by IP address and name..
    Use the utility in windows to set file sharing to guest account on with full read and write access.. and set workgroup to WORKGROUP.

  • Can anybody tell how to access web service from Message Driven bean

    Can anybody tell how to access web service from Message Driven bean

    Can anybody tell how to access web service from Message Driven bean

  • How to set up KM folder with Anonymous access.

    Experts,
    I would like to setup a KM folder with anonymous access where any document on that folder can be viewed by anonymous users by clicking on a link specific to that document. For example: http://server/irj/go/km/docs/documents/TechDocs/file_name.html
    Please note that this document will not be rendered through an iView, so setting up an anonymous role will not work in this case.
    Can anyone tell if this will be doable and the steps to do it?
    Thanks in advance for your help.
    Regards,
    Abu

    Hi Abu,
    > How can I just give access to a specific folder under /irj/go/km/docs?
    You have to differentiate between anonymous access to the iView behind /irj/go/km/docs (PCD auth scheme) and the permissions on KM folders (KM permissions). If you want to restrict the access, on the folders which should not be accessible for anonymous access, remove the group "Everyone" from the permissions (via details / settings / permissions). For details see http://help.sap.com/saphelp_nw04/helpdata/en/1b/12c49eb27011d5993800508b6b8b11/frameset.htm
    Hope it helps
    Detlev

  • How to access Views of ERP with Netweaver BPM?

    Hello,
    i want to create an example-application with Netweaver BPM and Visual Composer.
    For this, more employees should share the creation of a new Material in an ERP Backend.
    Every emplyoee should enter data of a different View of MM01 ! (like Basic Data, Sales..., Purchasing., ..)
    I thought about using the Service "Create Material Basic Data" but there are only little options for the data you can enter
    (only InternalID, Base Units, Description...).
    So my question is, how can i get access to the usual views of MM01 with Netweaver BPM and Visual Composer?
    Or how can i enter more Materialdata with Webservices?
    Thanks for your help,
    Oliver

    What you could also do is make use of MDM Webdynpro Components since your intention is probably to update master data at the end you can use MDM Webynpro Components and then use them a webdynpro application. Use the webdynpro component in the BPM Process in return or use the option given in the previous reply as well.
    http://help.sap.com/saphelp_nwmdm71/helpdata/en/4a/387eb4a7ea1ca2e10000000a42189c/content.htm
    Link to MDM WD Comps

  • How to view a BI query with anonymous user in the portal

    <b>Hi Gurus,</b>
    Does anybody knows how to view a BI query in the portal with anonymous user?
    Cause when i try to view a query the portal always ask for authentification. And i don't want to sign with a user cause my portal is for everybody and if the user logged in it shows the roles that previously were assigned.
    I have the Netweaver 2004 with SP9
    <b>Thank you Very Much</b>

    do you have sso configured between portal and BW server, if yes the authentication pop up should not come.
    if you dont want to do sso between portal and bw server and still want to logon to BW query with anonymous user,
    in you bw server go to transaction sicf and navigate to DEFAULT_HOST->SAP->BW->BEX and double click on bex node in the resulting window, log on details section provide a default userid/password
    Raja

  • How to create a service product with a condition record?

    Hi all
    I'm quite new to CRM programming and I now need to create a service product with a condition record. For creating the product I use function COM_PROD_SERVICE_MAINTAIN_API and it creates a product propperly. The function offers parameter IT_CONDITIONS for creating conditions. But when you have a look at type COM_PRODUCT_CND_API_TAB of the parameter, then you will find a deeep tabletype with lots(!) of additional tables. In the conditions tab of the product I simply enter a Condition Type, a Sales Organization, a Distribution Channel, an Amount, a Currency and a Unit and everything is fine after saving.
    Can anyone of you help me in how to set up parameter IT_CONDITIONS to get the above values into the product?
    Thanks fou you help,
    Michael Drechsler

    Hi,
    The link is https://support.oracle.com , you will have to request Oracle to link your user with your company support account.
    Cheers,
    Vlad

  • How to access a shared disk with two users account on same Mac

    I am seeking how to share / access at same time with two accounts on a same Mac a disk that is shared with a TC or an AEBS. When a user account is connected to the shared drive and when I switch to the 2nd user this 2nd user cannot access / see the content of the shared drive and it receives an error message. I want to use this shared drive to store some GB of movies I do not want to have on my MacBook Pro SSD but still bring able to access them from the two accounts that are set on my Mac. Just like for an internal drive. I have tried all I could but it does not want to work. How do I do that ? Thanks.

    If you were running this software, the Mac's Bonjour would automatically "discover" The Linux machine.
    http://en.wikipedia.org/wiki/Avahi_(software)

  • How to access OS User created with "identified externally"

    I am able to
    SQL> create user ops$deskuser identified externally;
    while deskuser is one of my OS user.
    I believe it is a very easy question, however I just do not know how to access this user from sqlplus., please help
    Thanks in advance

    oracle@mini:~> sqlplus system
    SQL*Plus: Release 10.1.0.3.0 - Production on Sun Nov 13 21:11:47 2005
    Copyright (c) 1982, 2004, Oracle. All rights reserved.
    Enter password:
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.1.0.3.0 - Production
    With the Partitioning, OLAP and Data Mining options
    SQL> create user ops$pops identified externally;
    User created.
    SQL> grant connect to pops;
    Grant succeeded.
    SQL> exit
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.3.0 - Production
    With the Partitioning, OLAP and Data Mining options
    oracle@mini:~> su - pops
    \Password:
    Illinois isn't exactly the land that God forgot -- it's more like the
    land He's trying to ignore.
    pops@mini:~> . oraenv
    ORACLE_SID = [pops] ? orcl
    pops@mini:~> sqlplus /
    SQL*Plus: Release 10.1.0.3.0 - Production on Sun Nov 13 21:16:59 2005
    Copyright (c) 1982, 2004, Oracle. All rights reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.1.0.3.0 - Production
    With the Partitioning, OLAP and Data Mining options
    SQL>

  • How to access a Beckhoff 9000 with TCP/IP?

    Hello,
    i´m using LV 8.5 with Windows-XP.
    A Beckhoff9000 (BK9000) is connected via LAN.
    What is working is, that i can ping my BK9000 in a cmd-box.
    The BK9000 has also connected:
    KL2134 (4 outputs)
    KL2134 (4 outputs)
    KL1418 (8 inputs)
    KL9000 (end)
    Is there an easy example of how to access these in- and outputs?
    Something like
    input:
    - IP-address (192.168.0.23)
    - module-number (1..3)
    - input-number (1..4 or 1..8)
    - mode (on/off)
    output:
    state (on/off)
    Thanks for all help how to do this.
    All i want to do is to enable or disable outputs and to read the state of an input.
    best regards

    Hi OnlyOne,
    did you see this thread?
    Hope it helps.
    Mike

  • How to read web services output with PHP

    Hello,
    I have a successful web service running from the tutorial provided by labview. The data does display when accessing the local URL with no issues. My problem is when I try to read the data using php I get a blank page. I have tried XML and json output. The json output stalls the page from loading and eventually I get a error 500 in IE. Any help would be greatly appreciated.

    Hello Kud,
    Can you verify that you see data when using HTTP Get?  You can find this function from Data Communication >> Protocol >> HTTP Client.
    For example:
    If so, this really is a PHP issue rather than a National Instruments/LabVIEW.  Take a look at this for more help.
    Thanks,
    Lisa
    Applications Engineer
    National Instruments

  • How to Access Web service with ADF Mobile Browser Application

    hi all,
    My Jdeveloper version is 11g 2 release(Version 11.1.2.2.0). I need to know If I create a web application and put it on a server as a web service., Then I create a Mobile browser application and need to access that web service.
    If it is possible, how should I do? version are same in both application.
    hopping any clue..
    Thxs.

    You can go thru the below links :
    ADF Mobile HowTos: Consuming SOAP web service in ADF Mobile using WS DC
    Oracle JDeveloper 11g Release 2 Tutorials - Building Mobile Applications with Oracle ADF Mobile

Maybe you are looking for