How to access the text symbols of a class

Hi Experts,
Can anyone pl. tell me how to access the text symbols of a class.
Thanks,
Uday.

Hi,
Please check
http://help.sap.com/saphelp_nw04s/helpdata/en/43/1f6442a3d9e72ce10000000a1550b0/frameset.htm

Similar Messages

How to access the Text Frame, when we use scrollable frame,

Hi Friends,
How to access the Text Frame, when we use scrollable frame,
Thank you,
[ Nav ]

That's the same question:
how can I access something (a page item) on a page…
Answer: you need something unique in that object you can get a handle on.
Or you use the selection a user of your script is doing and work with that selection…
A "scrollable frame" is nothing special. What it makes it a "scrollable frame" is the DPS software.
So you have to look for attached labels on the object, that identify the object for the PDS plug-in "Overlay Creator" as a "scrollable frame". That's possible with the "extractLabel("KeyString")" function. But you need to know the appropriate key-string in advance.
In another of your thread in the DPS forum, I basically answered the question how to obtain those key-strings.
When knowing the key-string you could loop through all your page items (you can skip all text frames) in the allPageItems-collection, to identify the "scrollable frame" by extracting the right label.
If you have more than one "scollable frames" you need a second unique identifier for the particular object.
That could be nearly any property.
Keep in mind, there is no "scrollableFrames" collection in the DOM !
Uwe

OOABAP-How to access the protected methos from a class

How to access the protected methos from a class..There is a built in class..For tht class i have created a object..
Built in class name : CL_GUI_TEXTEDIT
method : LIMIT_TEXT.
How to access this..help me with code

hi,
If inheritance is used properly, it provides a significantly better structure, as common components only
need to be stored once centrally (in the superclass) and are then automatically available to subclasses.
Subclasses also profit immediately from changes (although the changes can also render them invalid!).
Inheritance provides very strong links between the superclass and the subclass. The subclass must
possess detailed knowledge of the implementation of the superclass, particularly for redefinition, but also in
order to use inherited components.
Even if, technically, the superclass does not know its subclasses, the
subclass often makes additional requirements of the superclass, for example, because a subclass needs
certain protected components or because implementation details in the superclass need to be changed in
the subclass in order to redefine methods.
The basic reason is that the developer of a (super)class cannot
normally predict all the requirements that subclasses will later need to make of the superclass.
Inheritance provides an extension of the visibility concept: there are protected components. The visibility of
these components lies between that of the public components (visible to all users, all subclasses, and the class itself), and private (visible only to the class itself). Protected components are visible to and can be used by all subclasses and the class itself.
Subclasses cannot access the private components particularly attributes) of the superclass. Private
components are genuinely private. This is particularly important if a (super)class needs to make local
enhancements to handle errors: it can use private components to do this without knowing or invalidating
subclasses.
Create your class inse24 and inherit this CL_GUI_TEXTEDIT
class in yours. You can then access the protected methods.
Hope this is helpful, <REMOVED BY MODERATOR>
Edited by: Runal Singh on Feb 8, 2008 1:08 PM
Edited by: Alvaro Tejada Galindo on Feb 19, 2008 2:19 PM

How to access the text definition of sql indexes

I am able to access the text definition of stored procedures, views, triggers and functions from sys.sql_modules. I want to get the text definition of indexes.
Can somebody help me in getting the text definition of indexes in sql server.
Thanks,
Puneet

No, Actually I am trying to compare the indexes of two database programmatically.
I am able to compare the stored procedures, views, triggers and functions by getting text definition directly from 'sys.sql_modules', on similar lines do we have any way from where I could get the text definition of indexes
Not sure if there is any table which stores Index defination but there is a table "sys.indexex" which stores index details.
You may use below query to get index information (It will list out index details but not defination)
SELECT s.NAME 'Schema'
,t.NAME 'Table'
,i.NAME 'Index'
,c.NAME 'Column'
FROM sys.tables t
INNER JOIN sys.schemas s ON t.schema_id = s.schema_id
INNER JOIN sys.indexes i ON i.object_id = t.object_id
INNER JOIN sys.index_columns ic ON ic.object_id = t.object_id
INNER JOIN sys.columns c ON c.object_id = t.object_id
AND ic.column_id = c.column_id
WHERE i.index_id > 0
AND i.type IN (
1
,2
) -- clustered & nonclustered only
AND i.is_primary_key = 0 -- do not include PK indexes
AND i.is_unique_constraint = 0 -- do not include UQ
AND i.is_disabled = 0
AND i.is_hypothetical = 0
AND ic.key_ordinal > 0
ORDER BY ic.key_ordinal
- Also there is one more SP which you can create and then execute it by specifying DB names. It will list out table columns, indexes, constraints difference in one go.
EXEC SP_Comparedb db1,db2
Technet Gallary: Compare two databases for objects differences
Cheers,
Vaibhav Chaudhari

How to get the text of a message class

Hi,
I have a message class and added few message(with attributes) to that class.
Now i want to read the text of the message based on the attributes and
the message no.
Example:
Message 19 is - Where is &1. Where is &1. Where is &1. Where is &1.
Information that i have :
    ls_msg-msgty = 'S' .
    ls_msg-msgid = 'AP_JATT_TDC_MSG_CL'.
    ls_msg-msgno = 19 .
    ls_msg-msgv1 = 'A'.
    ls_msg-msgv1 = 'B'.
    ls_msg-msgv1 = 'C'.
    ls_msg-msgv1 = 'D'.
From the info that i have i want the text
Where is A. Where is B. Where is C. Where is D.
Is there any function modules which will provide me these details?
Regards,
Bikash.

HI
You can get the Text based on the Message attributes using the FMs
FORMAT_MESSAGE
MESSAGE_TEXT_BUILD.
Use any one of them..
It will work for u...
<b>reward if Helpful</b>

How to access the Swing Conponents in different Classes

Hi
In swing based application, Parent Frame filled with multiple Panels, for each panel i created separate class and added the required swing component.
components in one panel class require to update/modify components in another panel class.
For solving this problem i made the components & required methods in a class as STATIC and directly access from another class.
Is it right approach?
is there any other approach to solve this issue?
Thanks
nidhi

knidhi wrote:
Hi
In swing based application, Parent Frame filled with multiple Panels, for each panel i created separate class and added the required swing component.
components in one panel class require to update/modify components in another panel class.
For solving this problem i made the components & required methods in a class as STATIC and directly access from another class.
Is it right approach? No.
is there any other approach to solve this issue?Yes. Learn about the MVC design pattern.
You already implemented the V(iew)-part.
Now you have to create a M(odel) to hold the Information you want to manipulate and display and a C(ontroller) that changes this information upon the user input (could be combined...)
Usually the display components register themselves as Listeners to the model and the model publishes state changes to who ever has been registered...
bye
TPD

Error message when edit the text symbol.

Hi, i'm new in SAP .my task is to modify a program which is created by SAP Query. the problem is, i want to add a new field into header. when i click the text element to add a new text symbol , the error message Inconsistencies exist, Display Inconsistencies ? if i clik no, the message "The maximum length of text symbol GH0 has been set to 132". The system also display the error message "The maximum length of text symbol GH0 has been set to 132" when i'm try to modify it. Kindly advice how i can handle this problem. i really have no idea how to change the text symbol.
Thanks in advanced for your kind assistance.
Rafidah.

>
Rafidah Mahfodz wrote:
> Hi, i'm new in SAP .my task is to modify a program which is created by SAP Query. the problem is, i want to add a new field into header. when i click the text element to add a new text symbol , the error message Inconsistencies exist, Display Inconsistencies ? if i clik no, the message "The maximum length of text symbol GH0 has been set to 132". The system also display the error message "The maximum length of text symbol GH0 has been set to 132" when i'm try to modify it. Kindly advice how i can handle this problem. i really have no idea how to change the text symbol.
>
> Thanks in advanced for your kind assistance.
>
> Rafidah.
Maximum allowed length for text symbols is 132 characters only. For details check the following links:
http://help.sap.com/saphelp_nw04/Helpdata/EN/1e/401ad6ee3c11d1951d0000e8353423/content.htm
Regards,
Prashant.

How to use the separate symbol in the text field in the adobe form.

Hi,experts,
I dont know how to use the separate symbol to make a paragraph separate into several lines correctly in the text field in the adobe form.
Action:
1. config the ADS successfully.
2. create the adobe form with a mult-line textfield(binding the 'remark' context in the interface of the form) using sfp.
3. create a WDA for invoke the form and transfer the 'remark' context data.
I use the following codes to display the paragraph in the PDF document:
CONCATENATE
'1、aaaaaaaaaaa；'
'2、bbbbbbbbb '
'3、ccccccccccc'
'4、ddddddddd'
INTO remark .
lo_nd_z_hr_php_payslip->set_attribute(
EXPORTING
name = `REMARK`
value = remark ).
But I found all the content aren't paragraph separate correctly in the text field in the adobe form when I run the WDA.
Could you please give me some hints to make the paragraph separate correctly in PDF document? Thanks a lot in advance!
My email is : [email protected]
Best regards,
Tao
Edited by: wang tao on Apr 8, 2008 1:58 AM

Hi,
If it is just a one word value then you could use this in the exist event;
this.rawValue
= util.printx(">?<*",this.rawValue);
This changes the first character (represented by the ?) to uppercase (represented by the >) and all trailing characters (represented by the *) to lowercase (represented by the <).
If you wanted something more general ... if they could also enter a middle name then you could call a function like;
function toTitleCase(textValue)
return textValue.toLowerCase().replace(/\b[a-z]/g, function replacer(match) { return match.toUpperCase(); });
This uses a regex to change all lowercase letters following a word boundary to uppercase.
Bruce

In VB Programming code -- How to access the formula for suppressing a field

In VB Programming code -- How to access the formula for suppressing a field
I am using Crystal Reports 2008 v1
Using VB code, I am attempting to modify a Crystal Report before exporting it into a PDF format and then displaying it on the Web.
My problem is that I am unable to access the formula used to dynamically suppress a field.
The following code is working:
mySections = rd.ReportDefinition.Sections
For Each mySection As CrystalDecisions.CrystalReports.Engine.Section In mySections
   ' myFieldToChange is a String set to the text of the field I need to adjust the Suppression
   iloop = 0
   For Each RecObj As CrystalDecisions.CrystalReports.Engine.ReportObject In mySection.ReportObjects
           If mySection.ReportObjects.Item(iloop).Name.ToLower = myFieldToChange Then
               myTextObject = CType(mySection.ReportObjects.Item(iloop), CrystalDecisions.CrystalReports.Engine.TextObject)
               myTextObject.Text = "new field text goes here"
               mySection.SectionFormat.EnableSuppress = True
               ' Here is where I want to change the formula for the Suppression
            End if
            iloop = iloop + 1
    Next
Next
I can not find any reference to the actual suppression formula in the SDK help file.
Note, the EnableSuppress can be set to True for False, but if there is a formula for dynamic suppression, the True or False value is overwritten. The results of the formula determine the suppression.
Is there a way to reference this formula. I know that I can put on in using the Crystal Report Designer software, I need to modify this formula using VB code and the SDK.

Hello, Mark;
If you are using the ReportDocument object you do not have access to the Conditional Suppression formula. You can get around it by using a formula field in the report for the supression and then using the FormulaField code to change it at runtime.
If you want to change the supression condition directly at runtime you need to use RAS and the ReportClientDocument.
Elaine

How to use the separate symbol in the textfield in adobe form?..urgent

Hi,experts,
I dont know how to use the separate symbol to make a paragraph separate into several lines correctly in the text field in the adobe form.
Action:
1. config the ADS successfully.
2. create the adobe form with a mult-line textfield(binding the 'remark' context in the interface of the form) using sfp.
3. create a WDA for invoke the form and transfer the 'remark' context data.
I use the following codes to display the paragraph in the PDF document:
CONCATENATE
'1、aaaaaaaaaaa；'
'2、bbbbbbbbb '
'3、ccccccccccc'
'4、ddddddddd'
INTO remark .
lo_nd_z_hr_php_payslip->set_attribute(
EXPORTING
name = `REMARK`
value = remark ).
But I found all the content aren't paragraph separate correctly in the text field in the adobe form when I run the WDA.
Could you please give me some hints to make the paragraph separate correctly in PDF document? Thanks a lot in advance!
My email is : [email protected]
Best regards,
Tao
Edited by: wang tao on Apr 8, 2008 2:05 AM
Edited by: wang tao on Apr 10, 2008 10:29 AM
Edited by: wang tao on Apr 11, 2008 5:29 AM

With the pen tool in Indesign, is there a way of making the points not join if you want to make a few single lines?

How to use the text module in script

hi,
i script how to use the text modules and how to write the code in layout of the script?

Hi,
You canr use text modules in script. You have to use standard texts .
Standard text are maintained in SO10 transaction.
you can create translation text for other languages also . So based on logon language it will print translation text.
go to SO10
give textname it say Ztextname id as ST and language as EN
say create, then you will get editor there maintain your text and save it . then come back . Now change language (say for german DE) say create and eneter translation text and save it.
so now you have created a text called ztextname which you can use in your script.
Inorder to insert the texts in your script do as below
go to any window editor and select path
Insert->texts->symbols->standard symbols
then you will get popup in which you have to mention all the parameters that you have created earlier.
after inserting just change language EN to sy-langu
Reward points if useful
About text elements Sravan already given some informatiomn
Regards,
Nageswar

How to print the texts retrived by using READ_TEXT fun module in Smartform

Please tell me how to print the text which is rertrived by using the READ_TEXT function module in smartform.
I have coded all things in the program lines and in that i am retriveing the long texts.
I am getting the text lines in my internal table clearly, the thing is that I am not able to pass these lines to the text.
I have to print the trouble ticket. in that the notes log I have to pass.
its urgent. Points will be rewarded for any type of clue. whether it will work or not.

There are a few ways to do it. If you need to take all of the text in the text type, in your SF text element choose "Include Text".
Populate the fields with the data that corresponds to the text type. It is similar to the interface to the FM "Read_Text.
Text Name
Text Obje
Text ID
Language
Encase any variables with the "&" symbol.
If you have already coded the call to the FM "READ_TEXT" and loaded the text into an internal table, create a loop and loop through the itab. Inside of the loop create a text element and add a variable in the text element for the field you are looking to output.

How to change the text of customer tab in Me23n

Hi
I have added new customer tab in Me23n at item level.
Its text is Customer Data.
I would like to change to some other text.
How to change the text of customer tab in Me23n
Regards
Amruta

Amruta,
I had the same query today and finally found the answer.
In order to change the title text or description of the "Customer Data" tab in ME23N, etc. you need to define a new text symbol in program SAPLXM06. The text symbol must be number 111 for the PO data. Make sure you define this text symbol in the language you are using when viewing the PO. I had issues with this as the original language of object SAPXM06 is not my logon language.
The standard code which picks up this text is in function module MEGUI_BUILD_PO_ITEM_PLUGIN. I could not find any documentation around this functionality.
Hope this helps!
Ben

How to change the Field Symbol, so Adobe Forms takes it as a Table?

Hi guys,
I created an Field Symbol, in a Interface which I use for Adobe Forms. The type of the Field Symbol is STANDARD TABLE, and this field symbol I fill with data from another program.
But the problem is that in adobe forms, this Field Symbol is taken as TEXT FIELD and not as Table... and this shows me a Dump because it can't convert Internal Table to type C (the dump is like that).
What I need, is how to change the Field Symbol, so Adobe Forms takes it as a Table?
I looked at Adobe Form, and found this:
The Type Category of the Field Symbol is DICTIONARY TYPE and I think I need to change it to Internal Table as shown in the right picture.
Does someone have any idea?

Hello Taly,
To what i understand your requirement, you need to pass data from Field symbol to internal table in Adobe form.
You have done it correct partially. I have replicated your scenario and steps are below -
1) Create a Z structure
2) Create Z Table Type
3) Create Adobe Interface with Table & Field Symbol. Also do coding as shown to assign the internal table populated in driver program to filed symbol.
4) Design Form as -
5) Code driver as -
*& Report ZR_AF_FS_1
REPORT zr_af_fs_1.
DATA: fm_name           TYPE rs38l_fnam,
       fp_docparams      TYPE sfpdocparams,
       fp_outputparams   TYPE sfpoutputparams,
       it_kna1           TYPE ztt_fs_1.
* Sets the output parameters and opens the spool job
CALL FUNCTION 'FP_JOB_OPEN'                   "& Form Processing: Call Form
   CHANGING
     ie_outputparams = fp_outputparams
   EXCEPTIONS
     cancel          = 1
     usage_error     = 2
     system_error    = 3
     internal_error = 4
     OTHERS          = 5.
IF sy-subrc <> 0.
*            <error handling>
ENDIF.
*&---- Get the name of the generated function module
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'           "& Form Processing Generation
   EXPORTING
     i_name     = 'ZAF_FS_1'
   IMPORTING
     e_funcname = fm_name.
IF sy-subrc <> 0.
* <error handling>
ENDIF.
*-- Fetch the Data and store it in the Internal Table
SELECT kunnr name1 name2 adrnr FROM kna1 INTO TABLE it_kna1 UP TO 15 ROWS.
* Language and country setting (here US as an example)
fp_docparams-langu   = 'E'.
fp_docparams-country = 'US'.
*&--- Call the generated function module
CALL FUNCTION fm_name
   EXPORTING
     /1bcdwb/docparams        = fp_docparams
      it_data                   = it_kna1
*    IMPORTING
*     /1BCDWB/FORMOUTPUT       =
   EXCEPTIONS
     usage_error           = 1
     system_error          = 2
     internal_error           = 3.
IF sy-subrc <> 0.
* <error handling>
ENDIF.
*&---- Close the spool job
CALL FUNCTION 'FP_JOB_CLOSE'
*    IMPORTING
*     E_RESULT             =
   EXCEPTIONS
     usage_error           = 1
     system_error          = 2
     internal_error        = 3
     OTHERS               = 4.
IF sy-subrc <> 0.
*            <error handling>
ENDIF.
6) Output -
BR.

I want to know how to clear the text area by the push off my next question button and ask a new ques

I want to know how to clear the text area by the push off my next question button and ask a new question - also I want to know how to code in my project to where a user can enter a math question in one border container and the answer enters into the next container
heres my code so far
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:s="library://ns.adobe.com/flex/spark"
               xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600" backgroundColor="#1E5C75">
    <fx:Script>
        <![CDATA[
            protected function button1_clickHandler(event:MouseEvent):void
                //convert text area into labelid to be identified by actionscript
                richTextLabel.text = myArea.text;
        ]]>
    </fx:Script>
    <fx:Declarations>
        
    </fx:Declarations>
    
    <s:BorderContainer borderWeight="7" x="28" y="10" width="200" height="138">
        <s:layout>
            <s:VerticalLayout paddingTop="10" paddingBottom="10"
                              paddingLeft="10" paddingRight="10"/>
        </s:layout>
        
        <s:TextArea id="myArea" width="153" height="68"/>
        
        <s:Button width="151" label="ask a question" click="button1_clickHandler(event)"/>
    </s:BorderContainer>
    
    <s:BorderContainer borderWeight="7" x="509" y="10" width="200" height="138">
        <s:layout>
            <s:VerticalLayout paddingTop="10" paddingBottom="10"
                              paddingLeft="10" paddingRight="10"/>
        </s:layout>

        
        <s:Label id="richTextLabel" width="153" height="68"/>
        <s:Button width="151" label="next question" click="button1_clickHandler(event)"/>
    </s:BorderContainer>
    </s:Application>

This is a user to user support forum. We are all iphone users just like you.
You are not addressing Apple here at all.
This is an odd way to ask your fellow iphone users for help. Berating oterh users will not help you.
"it's too fragile"
No it is not. i have never damaged one, nor has anyone I know.
" U loose data when Ur phone is locked"
No you don't. Why do you think this?
"and there is no customer support!!! "
Wrong yet again. Apple has an 800 number and they have many retail stores and they have support articles that you can access using the search bar. Or you can contact them throgh express lane online
"but I will go back with Blackberry "
Please do.
Good ridance

How to access the text symbols of a class

Similar Messages

Maybe you are looking for