How to access variuus database servers at the same time.

Hi All,
Here, i've to access more than one databse servers at the same time.
i've to fetch some data from AS400, and some from MS-Access and SQL-server. The problem is this should be done at the same time.
What should i do. Plz. help.
Thx. in advance.

what is exactly "at the same time"
what could prevent you from opening multiple connections?

Similar Messages

  • Singletons running on two servers at the same time

    Hello,
              we faced one interesting situation with our application, running on clustered BEA Weblogic 9.2. We implemented some Singletons (ie. Singleton Service in a Weblogic cluster) and they are running fine. Most of the time.
              Common scenarios: cluster is started -> the singletons run on one server; the server is brought down -> the singletons are started on the second server.
              However, we had recently two situations where the Singletons started on both servers! Here they are:
              1) We use Database Migration Basis and we have a dedicated table for Weblogic to capture current state of the singletons. Due to the fact that database (Oracle RAC) was partially available one of the Managed Server could not get the lease and probably assumed that no singleton is running, therefore started the singletons locally.
              2) Network outage: we had several minutes where none of our servers could communicate between them (neither between SASU MS nor with the database). Consequence: each MS decided to start the singleton locally (after some time, which I assume is the waiting time). Once the network came back the servers could communicate again but the duplicate singletons are not deactivate, so they are running in parallel.
              Anyone experienced the same or similar issues? How to prevent the above? Is the Consensus Migration Basis a better choice? (I think yes for #1 but not for situation #2).
              Any helpful answer is appreciated.
              Thank you, best regards,
              Remus.

    In general its not a good idea.  Running PSConfig will try to establish a lock on the configuration database.  Doing that from two servers at the same time may cause the update to fail.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • How many threads can be running at the same time

    Hi!!
    Dows anyone knows how many Threads can be running at the same time in the JVM.
    I'm making a multi thread client-server app and I would like to know how much simultneous connections the JVM support. I'm using one Thread per connection.

    Hi, thanks to all for your answers.
    I think that I made the wrong question, as you said: "that means the number of threads currently created".
    I'm worry about this because my application is already online (It's a mail server -SMTP and POP3 server using ORACLE for the users database- ) and some other user post in the "multi-tread forum" that almost any JVM can only have 700 threads created at the same time, and I've never heard or read anything about this.
    what you mean with the stack space (memory??)
    I'm using the JavaWebServer 2.0 and a servlet to start the main Thread.
    Again Thanks to all for the answers but I think that the schapel answer is the one that solve my doubt...

  • Blue Screen of Death of multiple Windows Multipoint Servers at the same time in NUServer64.sys

    Hi, we are running
    Windows MultiPoint Server 2011 on 4 Dell 9010 machines and 45 Wyse E02 clients connected by 4 switches. Every week we got 2 or 3 random BSoD for all servers at the same time. Memory dump for server 2,3,4 show that the exception is from NUServer64.sys.
    Please check below for the system event logs and memory dump analysis output.  Any help would be appreciated!
    server1:
    Warning 11/17/2013 8:55:52 PM
    e1cexpress 27
    None
    Critical 11/17/2013 8:55:48 PM
    Kernel-Power 41
    (63)
    Error 11/17/2013 8:56:08 PM
    BugCheck 1001
    None
    The computer has rebooted from a bugcheck.  The bugcheck was: 0x0000001e (0xffffffffc0000005, 0x0000000000000000, 0x0000000000000008, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 111813-19765-01.
    Error 11/17/2013 8:56:03 PM
    EventLog 6008
    None
    The previous system shutdown at 12:53:40 on 2013/11/18 was unexpected.
    Error 11/17/2013 6:55:49 PM
    Disk 11
    None
    The driver detected a controller error on \Device\Harddisk2\DR2.
    Error 11/17/2013 6:55:48 PM
    Disk 11
    None
    The driver detected a controller error on \Device\Harddisk2\DR2.
    Warning 11/17/2013 3:42:08 PM
    Microsoft-Windows-TerminalServices-Licensing
    18 None
    server2:
    Warning 11/17/2013 8:55:39 PM
    e1cexpress 27
    None
    Critical 11/17/2013 8:55:31 PM
    Kernel-Power 41
    (63)
    Error 11/17/2013 8:55:52 PM
    BugCheck 1001
    None
    The computer has rebooted from a bugcheck.  The bugcheck was: 0x0000007e (0xffffffffc0000005, 0xfffff80002c80166, 0xfffff880023397e8, 0xfffff88002339040). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 111813-17518-01.
    Error 11/17/2013 8:55:44 PM
    EventLog 6008
    None
    The previous system shutdown at 12:53:53 on 2013/11/18 was unexpected.
    Warning 11/17/2013 7:16:07 PM
    NUServer64 3
    None
    server3:
    Warning 11/17/2013 8:55:38 PM
    Microsoft-Windows-TerminalServices-Licensing
    18 None
    Error 11/17/2013 8:55:31 PM
    BugCheck 1001
    None
    The computer has rebooted from a bugcheck.  The bugcheck was: 0x0000004e (0x000000000000009a, 0x0000000000417c94, 0x0000000000000006, 0x0000000000000002). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 111813-9937-01.
    Warning 11/17/2013 8:55:24 PM
    e1cexpress 27
    None
    Critical 11/17/2013 8:55:21 PM
    Kernel-Power 41
    (63)
    Error 11/17/2013 8:55:27 PM
    EventLog 6008
    None
    The previous system shutdown at 12:53:49 on 2013/11/18 was unexpected.
    server4:
    Warning 11/17/2013 8:55:33 PM
    Microsoft-Windows-TerminalServices-Licensing
    18 None
    Warning 11/17/2013 8:55:09 PM
    e1cexpress 27
    None
    Critical 11/17/2013 8:55:05 PM
    Kernel-Power 41
    (63)
    Error 11/17/2013 8:55:25 PM
    BugCheck 1001
    None
    The computer has rebooted from a bugcheck.  The bugcheck was: 0x0000000a (0x0000000100000001, 0x0000000000000002, 0x0000000000000001, 0xfffff8000328abe6). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 111813-14055-01.
    Error 11/17/2013 8:55:14 PM
    EventLog 6008
    None
    The previous system shutdown at 12:53:21 on 2013/11/18 was unexpected.
    Error 11/17/2013 8:51:47 PM
    NUServer64 4
    None
     \Device\NUServer_995D6600 
       <995D6600_3> Disconnect fail. 
    Error 11/17/2013 8:51:47 PM
    NUServer64 4
    None
     \Device\NUServer_995D6600 
       <995D6600_3> Connect fail. 
    Warning 11/17/2013 8:51:47 PM
    NUServer64 3
    None
    \Device\NUServer_995D6600 
       <995D6600_3> Connect time-out. 
    Warning 11/17/2013 8:50:00 PM
    NUServer64 3
    None
     \Device\NUServer_995B9000 
       <995B9000_3> Hi-Perf socket active clear. 
    Error 11/17/2013 8:49:25 PM
    NUServer64 4
    None
     \Device\NUServer_995D6600 
       <995D6600_3> Disconnect fail. 
    Error 11/17/2013 8:49:25 PM
    NUServer64 4
    None
    \Device\NUServer_995D6600 
       <995D6600_3> Connect fail. 
    Warning 11/17/2013 8:49:25 PM
    NUServer64 3
    None
     \Device\NUServer_995D6600 
       <995D6600_3> Connect time-out. 

    Memory dumps:
    server1:
    2: kd> !analyze -v 
    *                        Bugcheck Analysis                                    *
    KMODE_EXCEPTION_NOT_HANDLED (1e)
    This is a very common bugcheck.  Usually the exception address pinpoints
    the driver/function that caused the problem.  Always note this address
    as well as the link date of the driver/image that contains this address.
    Arguments:
    Arg1: ffffffffc0000005, The exception code that was not handled
    Arg2: 0000000000000000, The address that the exception occurred at
    Arg3: 0000000000000008, Parameter 0 of the exception
    Arg4: 0000000000000000, Parameter 1 of the exception
    Debugging Details:
    EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
    FAULTING_IP: 
    +3031623733386137
    00000000`00000000 ??              ???
    EXCEPTION_PARAMETER1:  0000000000000008
    EXCEPTION_PARAMETER2:  0000000000000000
    WRITE_ADDRESS:  0000000000000000 
    ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
    BUGCHECK_STR:  0x1E_c0000005
    DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
    PROCESS_NAME:  System
    CURRENT_IRQL:  0
    TRAP_FRAME:  fffff8800c744860 -- (.trap 0xfffff8800c744860)
    NOTE: The trap frame does not contain all registers.
    Some register values may be zeroed or incorrect.
    rax=0000000000000000 rbx=0000000000000000 rcx=0000000000000000
    rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
    rip=0000000000000000 rsp=fffff8800c7449f0 rbp=0000000000000000
     r8=0000000000000000  r9=0000000000000f44 r10=fffff80003602000
    r11=0000000000000358 r12=0000000000000000 r13=0000000000000000
    r14=0000000000000000 r15=0000000000000000
    iopl=0         nv up ei ng nz na pe nc
    00000000`00000000 ??              ???
    Resetting default scope
    LAST_CONTROL_TRANSFER:  from fffff800036c2738 to fffff80003677bc0
    STACK_TEXT:  
    fffff880`0c743fd8 fffff800`036c2738 : 00000000`0000001e ffffffff`c0000005 00000000`00000000 00000000`00000008 : nt!KeBugCheckEx
    fffff880`0c743fe0 fffff800`03677242 : fffff880`0c7447b8 00000000`00000030 fffff880`0c744860 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x487ed
    fffff880`0c744680 fffff800`03675dba : 00000000`00000008 00000000`00000000 00000009`00000000 00000000`00000030 : nt!KiExceptionDispatch+0xc2
    fffff880`0c744860 00000000`00000000 : 00000000`00000030 ffffffff`fffe7960 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x23a
    STACK_COMMAND:  kb
    FOLLOWUP_IP: 
    nt! ?? ::FNODOBFM::`string'+487ed
    fffff800`036c2738 cc              int     3
    SYMBOL_STACK_INDEX:  1
    SYMBOL_NAME:  nt! ?? ::FNODOBFM::`string'+487ed
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: nt
    IMAGE_NAME:  ntkrnlmp.exe
    DEBUG_FLR_IMAGE_TIMESTAMP:  521ea035
    FAILURE_BUCKET_ID:  X64_0x1E_c0000005_nt!_??_::FNODOBFM::_string_+487ed
    BUCKET_ID:  X64_0x1E_c0000005_nt!_??_::FNODOBFM::_string_+487ed
    Followup: MachineOwner
    server2:
    0: kd> !analyze -v
    *                        Bugcheck Analysis                                    *
    SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (7e)
    This is a very common bugcheck.  Usually the exception address pinpoints
    the driver/function that caused the problem.  Always note this address
    as well as the link date of the driver/image that contains this address.
    Arguments:
    Arg1: ffffffffc0000005, The exception code that was not handled
    Arg2: fffff80002c80166, The address that the exception occurred at
    Arg3: fffff880023397e8, Exception Record Address
    Arg4: fffff88002339040, Context Record Address
    Debugging Details:
    EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
    FAULTING_IP: 
    nt!KeSetEvent+16
    fffff800`02c80166 f6037f          test    byte ptr [rbx],7Fh
    EXCEPTION_RECORD:  fffff880023397e8 -- (.exr 0xfffff880023397e8)
    ExceptionAddress: fffff80002c80166 (nt!KeSetEvent+0x0000000000000016)
       ExceptionCode: c0000005 (Access violation)
      ExceptionFlags: 00000000
    NumberParameters: 2
       Parameter[0]: 0000000000000000
       Parameter[1]: 000000010f7f0a50
    Attempt to read from address 000000010f7f0a50
    CONTEXT:  fffff88002339040 -- (.cxr 0xfffff88002339040)
    rax=0000000000000000 rbx=000000010f7f0a50 rcx=0000000000000001
    rdx=0000000000000000 rsi=fffffa800f7ec050 rdi=fffffa800f7ec1a0
    rip=fffff80002c80166 rsp=fffff88002339a20 rbp=000000010f7f0a50
     r8=0000000000000000  r9=0000000000000150 r10=fffff80002c06000
    r11=fffff88002339a30 r12=0000000000000000 r13=fffffa800de82220
    r14=fffffa800f7f0ae0 r15=0000000000000002
    iopl=0         nv up ei ng nz na pe nc
    cs=0010  ss=0000  ds=002b  es=002b  fs=0053  gs=002b             efl=00010282
    nt!KeSetEvent+0x16:
    fffff800`02c80166 f6037f          test    byte ptr [rbx],7Fh ds:002b:00000001`0f7f0a50=??
    Resetting default scope
    DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
    PROCESS_NAME:  System
    CURRENT_IRQL:  0
    ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
    EXCEPTION_PARAMETER1:  0000000000000000
    EXCEPTION_PARAMETER2:  000000010f7f0a50
    READ_ADDRESS:  000000010f7f0a50 
    FOLLOWUP_IP: 
    NUServer64+65f1
    fffff880`0ab8c5f1 488b6c2448      mov     rbp,qword ptr [rsp+48h]
    BUGCHECK_STR:  0x7E
    LAST_CONTROL_TRANSFER:  from fffff8800ab8c5f1 to fffff80002c80166
    STACK_TEXT:  
    fffff880`02339a20 fffff880`0ab8c5f1 : 00000000`000003f0 00000001`00000000 fffffa80`0f7ec000 00000000`00000500 : nt!KeSetEvent+0x16
    fffff880`02339a90 fffff880`0ab8c8aa : fffffa80`0f7ec1a0 fffffa80`0f7eeb0c fffffa80`0f7ee2c8 00000000`00000002 : NUServer64+0x65f1
    fffff880`02339ad0 fffff800`02f721d3 : fffffa80`0f7f0ae0 fffffa80`0f7ec260 fffffa80`0f7ec050 fffffa80`0c72e040 : NUServer64+0x68aa
    fffff880`02339b40 fffff800`02c85261 : fffff800`02e21200 fffff800`02f72101 fffffa80`0c72e000 00000000`00000000 : nt!IopProcessWorkItem+0x23
    fffff880`02339b70 fffff800`02f182ea : 501a7d4d`a14dcd79 fffffa80`0c72e040 00000000`00000080 fffffa80`0c70b6f0 : nt!ExpWorkerThread+0x111
    fffff880`02339c00 fffff800`02c6c8e6 : fffff880`01f42180 fffffa80`0c72e040 fffff880`01f4d0c0 9ae0ec34`00b81aae : nt!PspSystemThreadStartup+0x5a
    fffff880`02339c40 00000000`00000000 : fffff880`0233a000 fffff880`02334000 fffff880`02339370 00000000`00000000 : nt!KiStartSystemThread+0x16
    SYMBOL_STACK_INDEX:  1
    SYMBOL_NAME:  NUServer64+65f1
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: NUServer64
    IMAGE_NAME:  NUServer64.sys
    DEBUG_FLR_IMAGE_TIMESTAMP:  4f66a064
    STACK_COMMAND:  .cxr 0xfffff88002339040 ; kb
    FAILURE_BUCKET_ID:  X64_0x7E_NUServer64+65f1
    BUCKET_ID:  X64_0x7E_NUServer64+65f1
    Followup: MachineOwner
    server3:
    0: kd> !analyze -v
    *                        Bugcheck Analysis                                    *
    PFN_LIST_CORRUPT (4e)
    Typically caused by drivers passing bad memory descriptor lists (ie: calling
    MmUnlockPages twice with the same list, etc).  If a kernel debugger is
    available get the stack trace.
    Arguments:
    Arg1: 000000000000009a, 
    Arg2: 0000000000417c94
    Arg3: 0000000000000006
    Arg4: 0000000000000002
    Debugging Details:
    BUGCHECK_STR:  0x4E_9a
    DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
    PROCESS_NAME:  System
    CURRENT_IRQL:  0
    LAST_CONTROL_TRANSFER:  from fffff80002d629ef to fffff80002cd3bc0
    STACK_TEXT:  
    fffff880`14417968 fffff800`02d629ef : 00000000`0000004e 00000000`0000009a 00000000`00417c94 00000000`00000006 : nt!KeBugCheckEx
    fffff880`14417970 fffff800`02e0403b : fffff880`14417a08 fffffa80`10cd1b88 fffff880`144179e0 00000000`000005a0 : nt!MiBadRefCount+0x4f
    fffff880`144179b0 fffff800`02e078a7 : fffffa80`12894000 00000000`00000000 fffff6fb`7ea004a0 fffff800`00000001 : nt!MiFreePoolPages+0xa8b
    fffff880`14417ac0 fffff880`0ad8d07a : 00000000`00000003 fffffa80`0f4471a0 fffffa80`36747345 fffffa80`00000000 : nt!ExFreePoolWithTag+0x7c7
    fffff880`14417b70 fffff800`02f702ea : fffffa80`10cd1a80 00000000`00000080 fffffa80`0c70a740 003f005c`005c0000 : NUServer64+0x1707a
    fffff880`14417c00 fffff800`02cc48e6 : fffff800`02e4ee80 fffffa80`10cd1a80 fffff800`02e5ccc0 00310026`00330023 : nt!PspSystemThreadStartup+0x5a
    fffff880`14417c40 00000000`00000000 : fffff880`14418000 fffff880`14412000 fffff880`144174b0 00000000`00000000 : nt!KiStartSystemThread+0x16
    STACK_COMMAND:  kb
    FOLLOWUP_IP: 
    NUServer64+1707a
    fffff880`0ad8d07a 440f20c0        mov     rax,cr8
    SYMBOL_STACK_INDEX:  4
    SYMBOL_NAME:  NUServer64+1707a
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: NUServer64
    IMAGE_NAME:  NUServer64.sys
    DEBUG_FLR_IMAGE_TIMESTAMP:  4f66a064
    FAILURE_BUCKET_ID:  X64_0x4E_9a_NUServer64+1707a
    BUCKET_ID:  X64_0x4E_9a_NUServer64+1707a
    Followup: MachineOwner

  • Running PSConfig on multiple servers at the same time

    Hi - we are updating an 8 server farm with a CU and in order to reduce downtime I am wondering whether it is supported/risky to run PSConfig on multiple SharePoint servers at the same time
    I plan to run the first one by itself - then after that set 7 off at the same time
    In the past I have always run them serially just to be cautious but there is pressure to reduce downtime so I want to know if there is any risk in running them simultaneously
    Thanks!
    J

    In general its not a good idea.  Running PSConfig will try to establish a lock on the configuration database.  Doing that from two servers at the same time may cause the update to fail.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • In Elements 7.0, how can I delete multiple photos at the same time?

    In Adobe Photoshop Elements 7.0, how can I delete multiple photos at the same time?   Please be a little specific so I can follow your instructions as I'm not real smart at computers; I'm an intermediate user.  Thank you.

    Shift-click the photos or Ctrl-click them to select them, then right-click one of them and choose Delete from Catalog. They will all go together.

  • TS4020 I live in a house with multiple iCloud users.  When they try to turn on "Find my computer"  they get the message that they will have to disable my "find my computer" setting in order to enable theirs.  How can they all be enabled at the same time?

    I live in a house with multiple iCloud users.  When they try to turn on "Find my computer"  they get the message that they will have to disable my "find my computer" setting in order to enable theirs.  How can they all be enabled at the same time?

    Try this support document for information on how to contact Apple and account security. Apple ID: Contacting Apple for help with Apple ID account security

  • Can multiple PCs access one remote panel at the same time?

    I've written a program in labview 7.1 to monitor/control a labview application running in the test cell through Remote Panel. I and my coworker can remotely monitor and/or control this labview application individually. But if my coworker has the remote panel displayed on his PC and I try to get the remote panel on my PC, I get a labview error (63) as below:
    "LabVIEW:  Serial port receive buffer overflow.
    LabVIEW:  The network connection was refused by the server."
    My question is: Can multiple PCs access one remote panel at the same time?
    Thanks in advance!
    Y

    Sorry I wasn't clear. The remote panel license is separate from the number of LabVIEW development licenses. Pricing information on remote panel licenses can be found here.

  • How do i uncheck multiple songs at the same time in my library?

    how do i uncheck multiple songs at the same time in my library?

    THANKS.
    i just figured out that u can highlight them then right click and the option is there

  • How do I delete multiple emails at the same time rather than individually?

    How do I delete multiple emails at the same time rather than individually?

    My mistake
    I was looking at my KB, even tested my suggestion with the command key, and then wrote option
    Barry

  • How do I open several tabs at the same time?

    How do I open several tabs at the same time?

    Can't you open more than one tab?
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • My Apple ID and rescue email are reversed. How can I change them both at the same time

    My Apple ID and rescue email are reversed. How can I change them both at the same time?

    I'd already used this standard tool (exhaustively!), but for the problem encountered it operated in Catch 22 mode - you had to do two things but neither order was permitted. I did find an answer eventually, but am not sure what it was I did that solved it! Thanks, anyway.

  • On I-Mac, how can I close all tabs at the same time?

    On I-Mac, how can I close all tabs at the same time?
    I use Mozilla Firefox for internet.

    Not an Apple product, have you visited:
    https://support.mozilla.org/en-US/kb/keyboard-shortcuts-perform-firefox-tasks-qu ickly

  • How can I visualize 2 documents at the same time

    How can I visualize 2 documents at the same time?
    thanks

    Adobe Reader on mobile devices allows to view ONE document at a time.

  • Iphone 6 airdrop problem can't find or connect to my iPhone 5s to share pic, how i can fix this ? at the same time my iPhone 5s no problem with airdrop to share.

    Iphone 6 airdrop probleme can't find or connect to my iPhone 5s to share pic, how i can fix this ? at the same time my iPhone 5s no problem with airdrop to share.

    hi raz, i don't have problem how to use airdrop , but the iPhone  6 can not find other contact so i can share pic , and i have iOS 8.0.2 on both iphone.and i have the same network .
    with iPhone 5s i can share with airdrop and he find my iPhone 6 name so i share and accept pic, but from iPhone 6 i can't do the same.

Maybe you are looking for

  • OLEDB Requirements on the Client PC

    I have developed many VB apps using ADO to interface with SQL Server 7 successfully but now am developing a VB app to use ADO (OLE DB) to Oracle 8.1.7 and have some questions? 1. Can I use the Provider in MDAC 2.6 provided by Microsoft to successfull

  • Family share and automatic downloads

    I recently upgraded all my family to iOS 8 and wanted to try and set each one an iCloud account, there are several things that doesn't work with family share and I wanted to make sure that it's not cause I dont k ow how to activate them. 1. iTunes ma

  • HT1766 my iphone 4 is stuck in restore after updating the lasted version.  It was working fine before.How do I get it working again?

    my iphone 4 is stuck in restore after updating the lasted version.  It was working fine before.How do I get it working again?

  • B2B chseck box in campaign

    In previous releases of CRM (prior CRM 2007), B2B checkbox would work inconjucntion with assignment of partner funtions to target groups as follows: CP(Partnmer Functions) plus B2B checkbox: The BPs to be contacted from the target group could have be

  • How to auto login multiple users on boot?

    I have mac mini and have users with autostart some programs. But autostart is only when i login on this account. So now only i can login in to each account and when switch to next account. But it is not good. I need auto login in to all needed user a