How to add a field from BSAK/BSIK table in FI_AP_4 Data source

Hi Experts.
I need to add a field in FI_AP_4 data source.
Can you provide me steps in detail to do so, any sample for ABAP code too. field name is XZAHL and it is in multiple tables.
Thanks
mihameed

hi Amams
check this link
Adding Fields to Sales order
i think it may give u some idea
Regards,
Naveen

Similar Messages

How to add new field into dynamic internal table

Hello Expert.
how to add new field into dynamic internal table.
PARAMETERS: P_TABLE(30).    "table name
DATA: I_TAB TYPE REF TO DATA.
FIELD-SYMBOLS: <TAB> TYPE standard TABLE.
*Create dynamic FS
create DATA I_TAB TYPE TABLE OF (p_table).
ASSIGN I_TAB->* TO <TAB>.
SELECT * FROM (p_table) INTO TABLE <TAB>.
   here i want to add one more field into <TAB> at LAST position and my
   Field name = field_stype     and
   Field type    = 'LVC_T_STYL'
could you please helpme out .

Hi,
Please find the code below.You can add the field acc to your requirement.
Creating Dynamic internal table
TYPE-POOLS: slis.
FIELD-SYMBOLS: <t_dyntable> TYPE STANDARD TABLE, u201C Dynamic internal table name
               <fs_dyntable>,                     u201C Field symbol to create work area
               <fs_fldval> type any.              u201C Field symbol to assign values
PARAMETERS: p_cols(5) TYPE c.                     u201C Input number of columns
DATA:   t_newtable TYPE REF TO data,
        t_newline TYPE REF TO data,
        t_fldcat   TYPE slis_t_fldcat_alv,
        t_fldcat   TYPE lvc_t_fcat,
        wa_it_fldcat TYPE lvc_s_fcat,
        wa_colno(2) TYPE n,
        wa_flname(5) TYPE c.
Create fields .
DO p_cols TIMES.
    CLEAR wa_it_fldcat.
    move sy-index to wa_colno.
    concatenate 'COL'
                wa_colno
           into wa_flname.
    wa_it_fldcat-fieldname = wa_flname.
    wa_it_fldcat-datatype = 'CHAR'.
    wa_it_fldcat-intlen = 10.
    APPEND wa_it_fldcat TO t_fldcat.
ENDDO.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = t_fldcat
    IMPORTING
      ep_table        = t_newtable.
ASSIGN t_newtable->* TO <t_dyntable>.
Create dynamic work area and assign to FS
CREATE DATA t_newline LIKE LINE OF <t_dyntable>.
ASSIGN t_newline->* TO <fs_dyntable>.
Populating Dynamic internal table
DATA: fieldname(20) TYPE c.
DATA: fieldvalue(10) TYPE c.
DATA: index(3) TYPE c.
DO p_cols TIMES.
    index = sy-index.
    MOVE sy-index TO wa_colno.
    CONCATENATE 'COL'
                wa_colno
           INTO wa_flname.
Set up fieldvalue
    CONCATENATE 'VALUE' index INTO
                fieldvalue.
    CONDENSE    fieldvalue NO-GAPS.
    ASSIGN COMPONENT wa_flname
        OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
    <fs_fldval> = fieldvalue.
ENDDO.
Append to the dynamic internal table
APPEND <fs_dyntable> TO <t_dyntable>.
Displaying dynamic internal table using Grid.
DATA: wa_cat LIKE LINE OF fs_fldcat.
DO p_cols TIMES.
    CLEAR wa_cat.
    MOVE sy-index TO wa_colno.
    CONCATENATE 'COL'
                wa_colno
           INTO wa_flname.
    wa_cat-fieldname = wa_flname.
    wa_cat-seltext_s = wa_flname.
    wa_cat-outputlen = '10'.
    APPEND wa_cat TO fs_fldcat.
ENDDO.
Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      it_fieldcat = fs_fldcat
    TABLES
      t_outtab    = <t_dyntable>.

How to add Z fields from VBPA in datasource 2LIS_11_VAITM in delta mode

Hi All,
I'm looking for a method to add Z fields from VBPA (ie order reponsible , account manager , ..) in the datasource 2LIS_11_VAITM
Of course these fields should be filled in delta process
Thanks for your help
Regards
Sebastien

Hi,
You would have to enhance the extract structure and write code to populate this:
1.1 First alwas Check if fields can't be added using the standard method - Logistics Cockpit (LBWE)
1.1. Don't think you would be able to fields from table VBPA though which means you have to enhance the extract structure:
2.1 RSA6 - Enhance Datasource
2.2 Double Click on Datasource
2.3 Double Click on Extract Structure
2.4. Click Append Structure & give a name for the append strcture
2.5. Add Z-Fields prefixed with "ZZ"
2.6. Save & Activate
3. Enhance Datasource (RSA6)
3.1 New fields are hidden automatically and you must un-tick "hide" check box
3.2 Save the datasource
3. Write Code in Transaction CMOD or BADI (SE19) to popoule the Z-Fields.
If you search for "enhance 2LIS_11_VAITM" in forum you should get a lot of example on how to do this.
4. Test in RSA3 that your Z-Fields are populated.
5. Replicate Datsource on BW side to ensure that new fields are transfered from the Source System.
6. Maintain Infosource, Transfer Rules, Infocube and Update Rules for the new fields.
Hope it helps.

How to compare two fields from the same table in the select statement

Hi, friends
I try to compare tow fields from the same table, but no result,
For example, this
data: cptotchek tyep i.
select count(*) into cptotchek
from aufk where erdat = aufk-idat2 .
The result is cptotchek = 0, but there are the records in aufk , where, aufk-erdat = aufk-idat2.
Please, help me, i don't use the loop statement for optimize my program.
Regards

Hi ,
       it will not return any value   when you are using   column of same table
       such as Date Field   , Because while Using Aggregate Function it will not check with self column
.      For that you have to take data in one internal table and then you can work on it .
     And if you are worried about Performance it will not affect , untill you are selecting only required data .
you can try this way .
data: cptotchek type i.
types : begin of w_aufk.
        include structure aufk .
      types : end of w_aufk .
data : it_aufk type standard table of w_aufk with header line .
select * into corresponding fields of table it_aufk
from aufk .
loop at it_aufk .
if it_aufk-erdat = it_aufk-idat2 .
write : / it_aufk-erdat , it_aufk-idat2 .
else .
delete it_aufk .
endif .
endloop.
Regards
Deepak.

How to add related fields from one transaction to other transacction?

Hi all,
I have a problem. I need to add an OPPORTUNITY field (SALESCYCLE) to the ACTIVITY transaction because of an upgrade and I'm now in a new world... The CRM 2007 is an unexplored place to me.
I added some custom fields (Z fields from the CUSTOMER_H) by adding the context node BTCUSTOMERH to the BT126H_APPT component, view ApptDetails, with transaction BSP_WD_CMPWB (thanks Stephen Johannes for your blogs) and all works correctly.
I tried doing the same with the SALESCYCLE and it doesn't worked... :_(
I added the context node BTOPPORTH, but I'm sure I failed at the wizard step with the "Higher level context node" or with the "BOL Relation", but I can't find the correct answer. I found the field in the "Configuration tab", I put it in my view but the GET method doesn't work... The field remains always void.
I don't have problems adding activity related fields, but when I try to add some flow related (opportunity one in my case) fields it's different.
I have been looking for any solution but I have only seen that I can add this attribute directly to one context node and modify some BAdI or do any thing similar, but I don't know how to do that either. I will accept this solution if someone tells me how to do that... But I think the first solutions could be the most appropiate (I can be wrong... of course!)
Thanks in advance....
Sergio

Thanks for your answer, Subhasis!
Your solution is correct if I want to add to the Activity a field related to the Activity or some field on the DocFlow structure (the case you described), but it's not my case. I did that with customer fields before and all worked correctly.
My scene is like this. I have an Opportunity and there is a follow-up Activity created. When I want to see the Activity, I need to show on the Activity transaction the preceding Opportunity field SALESCYCLE, which is at the CRMD_OPPORT_H table (BTOPPORTH context node).
The problem comes when I add this context node to the Activity. I think the application is trying to get the field from the CRMD_OPPORT_H with ACTIVITY data and it returns void to the field. I think it forgets to get the opportunity data first and after that try to get the SALESCYCLE value from the CRMD_OPPORT_H (with the Opportunity GUID).
By the moment, I have added the attribute SALESCYCLE to the BTDOCFLOW context node and, at the moment he do the GET, I change the field it gets by the GUID of the opportunity:
dref = current->get_property( 'SALESCYCLE' ). "#EC NOTEXT
dref = current->get_property( 'OBJKEY_A' ). "#EC NOTEXT
Then I go to the CRMD_OPPORT_H directly to get the SALESCYCLE value...
I know it's a bad solution... but it works and I don't know any other solution by now. If anyone can help me to do it correctly I'll be greatly appreciated!
Regards,
Sergio

How to summary a field from 2 separate tables but having the same fields

Post Author: thuyvd78
CA Forum: General
Hi, I am getting trouble with creating the summary from 2 separate tables. These tables dont have any link together but they have the same fields, such as: part id, qty, etc. I need to create a report that displays whole the information from these tables and also the summary of total qty field of these tablesAny idea to organize this report? Thank you very much! Thuy

Post Author: thuyvd78
CA Forum: General
Thank you for your help v361.where can I can get the link to download samples for subreport from official website?And can I use FULL INNER query to join these tables. I think this way is much clearer than using subreport but not sure it will work? Thanks Thuy

How to add a cell from 2 different tables in 2 different Matrix(s) that reside on the same rdlc report?

Hello Community
    Using Visual Studio 2008 I have created a Windows Forms Application in which I created
Embedded Reports (rdlc).
    The embedded reports (rdlc) uses Matrix(s).
    Now on this one rdlc I have dragged 2 Matrix(s) onto the body.
    One of the Matrix datasource dataset name and table name is "DataSet1_Table1.
    A cells in the Matrix has a total column on the end as follows:
=FormatNumber(Sum(Fields!fld1.Value)+Sum(Fields!fld2.Value)+Sum(Fields!fld3.Value)+Sum(Fields!fld4.Value)+Sum(Fields!fld5.Value),"0")
    The other Matrix datasource dataset name and table name is "DataSet2_Table2.
    The cell in this Matrix has a total column on the end as follows:
=Sum(Fields!fld1.Value)+Sum(Fields!fld2.Value)+Sum(Fields!fld3.Value)+Sum(Fields!fld4.Value)+Sum(Fields!fld5.Value)
    As you can see each Matrix has a different table.
    I would like to add the total columns from each table in each Matrix but I haven't been
able to do it successfully. If I have to drag another Matrix or a Textbox on the
body to do it that is okay and/or add another/different formula to a cell onto the body that is
okay too.
    So my question is how can I add the contents of the total in cell from each table in each matrix
which will create the "grand total"?
    Thank you
    Shabeaut

It is possible to reference SSRS elements directly using the ReportItems collection. If your total tablix cell is outside of yoour matrix groups, you can use this collection to accomplish what you want:
=ReportItems!Matrix1Total.Value + ReportItems!Matrix2Total.Value
where Matrix1Total and Matrix2Total is the name of the cell that contains your totals. Note that for this to work, the cell name must be unique. If the total cell is inside a group, it will be repeated once for each instance of the group and will not be
unique.
You may be able to do it using the Sum aggregate and specifying the dataset for the scope variable:
=Sum(Fields!fld1.Value, "DataSet1")+Sum(Fields!fld2.Value,
"DataSet1")+Sum(Fields!fld3.Value,
"DataSet1")+Sum(Fields!fld4.Value,
"DataSet1")+Sum(Fields!fld5.Value,
"DataSet1")+Sum(Fields!fld1.Value,
"DataSet2")+Sum(Fields!fld2.Value,
"DataSet2")+Sum(Fields!fld3.Value,
"DataSet2")+Sum(Fields!fld4.Value,
"DataSet2")+Sum(Fields!fld5.Value,
"DataSet2")
This will work as long as you are not filtering the dataset in your Matrix properties. If you are, those
filters will not apply to this expression and the numbers will not total correctly.
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek.

How to add a field in already extracted Table

Hi ,
Requirement is to add a new field in VBAK Table ( incoterms). VBAK has alredy extracted in HANA with few selected fields.
Please suggest

Hi,
Please see documentation of enhancement MM06E005 (transaction SMOD).
Userexit EXIT_SAPMM06E_016 is a component of enhancement MM06E005.
With that enhancement, you can
-   Maintain/supply your own customer fields
-   Update your own customer-specific tables
You cannot:
-   Change standard fields
-   Change data that depends on the document header in the items
-   Change data that depends on an item in the document header
Please have a look at Business Add-In (BAdI) ME_PROCESS_PO_CUST.
Regards,
Edit

How to add more fields at level task for importing to MsProject

Hi everyone,
We would like to have the same number of fields either for importing as exporting; or at least, the fields that we need.
The problem is when we are configurating the fields for exporting from cProjects to MsProject, we found 81 available fields and then we don't find the same amount for importing (34). So, in some cases we don't find fields which were configurated for exporting and it is no posible to upload the information back because the field is no available for importing.
Does anyone knows how to add more fields for importing at the cProjects side?
Thanks a lot,
CAMILO URIBE

Some fields can not be migrated because of MsProject designe. The above is the reason why cProjects' customizing does not offer the
mapping of the same nuember of fields.

How to Add parameter fields in BI publisher fields

Hi,
I'm creating xml report for Apps standard Trial Balance Summary, here i cant able to run the .rdf locally due to SRW.UserExit .
So i got the XML file from output of the report.
Then i added the xml data in BI publisher and then i have created the .rtf for that.
Here i need to add some fields which is not available in fields list (in BI Publisher).
How to add that fields, or is possible to add fields manually.
That fields are given as parameters while running the .rdf file.
Please tell me how to solve this problem.
Is possible to add fields manually means tell me how to do that.

If those fields are input parameters to the concurrent program then you can display them in RTF by declaring and printing it as
<?param@begin:P_CONC_PARAM?>
and display it as <?$P_CONC_PARAM?> - Note P_CONC_PARAM should match your parameter token

How to add the entries and how to delete the entries from custom Z-table?

Hi Experts,
My requirement is I need to add the entries from program to three custom z-tables . Assume as zabc1,zabc2,zabc3.
Here how to add the entries from program to Z-table.???
And one more requirement is I want to provide a deletion checkbox in selection screen . Initial it was unchecked. If I am giving tick mark then the entries should be deleted from above custom Z-tables. this all will done in backgroung job?
Could you please guide me the logic how to crack this???
Let me know if you need more Info
Thanks
Sanju

Hi Sanjana,
What you can do is to use the ABAP keyword INSERT or MODIFY to add or modify records to a given database table. Here are the syntax taken from SAP documentation:
*Insert Statement
INSERT dbtab
Syntax
INSERT { {INTO target VALUES source }
| { target FROM source } }.
Effect
The INSERT statement inserts one or more rows specified in source in the database table specified in target. The two variants with INTO and VALUES or without INTO with FROM behave identically, with the exception that you cannot specify any internal tables in source after VALUES.
System Fields
The INSERT statement sets the values of the system fields sy-subrc and sy-dbcnt.
sy-subrc Meaning
0 At least one row was inserted.
4 At least one row could not be inserted, because the database table already contains a row with the same primary key or a unique secondary index.
The INSERT statement sets sy-dbcnt to the number of rows inserted.
Note
The inserted rows are finally included in the table in the next database commit. Up until this point, they can still be removed by a database rollback.
*Modify Statement
MODIFY dbtab
Syntax
MODIFY target FROM source.
Effect
The MODIFY statement inserts one or several lines specified in source in the database table specified in target, or overwrites existing lines.
System fields
The MODIFY statement sets the values of the sy-subrc and sy-dbcnt system fields.
sy-subrc Meaning
0 At least one line is inserted or changed.
4 At least one line could not be processed since there is already a line with the same unique name secondary index in the database table.
The MODIFY statement sets sy-dbcnt to the number of processed lines.
Note
The changes are transferred finally to the database table with the next database commit. Up to that point, they can be reversed using a database rollback.
Hope it helps...
P.S. Please award points if it helps...

How to add a field in the view not in context node

Hi All,
I want to add a new field in one of my views. The problem is that the field does not exist in the context node. I have checked in the BOL model there it comes under another root object. I would like to know whether it is possible to add the field from another root object.
can you please help to me to solve this issue.
Advance Thanks & Regards
Sujith

Hi Ashish,
I will give a detailed explanation of my requirement. I am working in ICWEB client for utility services, In this case for a particular view in the bsp application CRM_IUFCS_IC/View1.htm i want to add a field but the field is not the context nodes, or any of the related entities in the BOl Model. But its in another root object in the BOL Model. So i would like to know how can i add this field into my layout.
e.g.:let context node in view to be modified is buag and the field to be added is under BuilHeader object. This is the scenario.
Advance Thanks,
Sujith

REG: How to add new fields to existing Infospoke

Hi All,
We have an existing Infospoke, It has ODS as a Source and some fields are being pulled.
But here is the scenario....
I need some extra fields that are available in other ODS. How to add that fields ?
By some research came to know that.. I need to lookup on the ODS and populate into existing Infospoke.How to add these fields to InfoSpoke using BAdi implementaion.
Note: already BAdi is active in the infospoke.
Please help me in this regard

Hi Chase,
As you mentioned that BADI is already implemented then I guess you should be able to extend the existing BADI itself.
For doing lookup first you should know the key fields of source DSO then by using the existing field of Infospoke you will have to read data from DSO.
DATA: it_data type standard table of 'DSO Name'.
select Key1 key2 etc...
          Field1 Field2 Field3 Field4
          from DSO
          into table it_data
          for all entries of infospoke
         where key1 = infospoke1-key1
                     key2 = infospoke2-key2.
This will give you all the required records from source DSO into internal table it_data. Now you using this table you can populate the original table of Infospoke.
Regards,
Durgesh.

11.5.9/OAF 5.7 : how to add new fields in iProc "search results" page

We need to add new fields into iProc "search results" page - "Personalize Self-Service Defn" is et, we can enter the personalization screens (from both the "master" link at top/right page level or from the link above the region) - anyway cannot find how to add new fields. Do we have to go to AK developer and/or XML files or is it feasable from OAF (as it is with 11510) ? TIA.

It depends on what fields you want to add.
1. If Oracle has included the fields, just render them via personalizations
2. If they are brand new fields:
a) you will need to extend the VO (I do not know the exact name).
b) change the query to get your extra db columns if necesary
c) add transient attributes to the VO and map them to b).
d) Then you need to add the items via personalization and map them to the attributes you created in c)
Check on metalink for the lates version of OAF Dev Guide and Personalization guide.
Thanks
Sandeep

CRM IC Winclient - How to add new fields in the BP Search of TRX CIC0

Hello Experts,
I want to know how to add new fields in the BP Search of TRX CIC0. In the HTML that we're using here I need to add the URL of the BP.
Can you help me?
Thanks in advance.
Caíque Escaler

Hi
make append to tables in se11 - CCMBP1FIELDS, CCMBP2FIELDS
in spro in Define customer-specific search control -> mark fields with X.
and enhance html template CRM_CIC_SEARCH_DISPLAY. -> tcode smw0, look for package CRM_CIC_COMPONENTS for html CRM_CIC_SEARCH_DISPLAY. export it from SAP, edit, and import.
you will need to enhance function module used for searching - you will find him in spro in Search Strategies.
Regards
Radek

How to add a field from BSAK/BSIK table in FI_AP_4 Data source

Similar Messages

Maybe you are looking for