How to add modules to my Customer Project?

Hello,
I've created a new Customer Project on an existing track for the ICSS_B2B application. After the creation, I want to add modules to my CP but this aint
working. When I right click on my CP in the J2EE DC Explorer and press 'Add
Modules', I can't specify any Web- and EJB-Modules. It's an empty list.
What did I do wrong? Can anyone help me?
thank you in advance,
kind regards...

how to change the class name after the project is created.In NetBeans, right click the class name either in the declaration or constructor, select Refactor --> Rename... and follow the dialog.
You can refactor --> rename anything that is not in a guarded block. For those, there are options via the properties window.
db

Similar Messages

How to add search help to custom infotype listbox??

Hi All,
How to add search help to custom infotype listbox??
Thanks in advance

Hi Vinay,
We have search help and list box as 2 different options.
At a time we can make a field a list box or a search help.List box is restricted and we can pick values from the defined list whereas in search help we can allow more entries and then validate the value entered later.
Implementing a listbox or search help in infotype is same as that of implementing it in a modulepool .
for search help..we can create a custom search help or check for existing search help in se11
then in the screen on infotype field..assign the search help direcly at the screen painter level..
double click on the field in screen painter -> change mode and then in the space for "search help" enter the search helps name
for list box..in the screen painter ,make sure the field is selected as list box..then in PAI of screen we do a
(Process on value-request..field fieldname module module name)..check syntax and other details...
Using function module vrm_set_value fill the field and populate it as required
Pls check and revert
Regards
Byju

How to add a class in a project?

Hello!
i'm a beginner in developing and i don't know how to add a class in a project in Sun Java Wireless toolkit 2.5.2...
The name of my project is essai2 and i already put a class, LogoMIDlet and now i want to put my new class ComBasique, how can i do that?
and do you know if there is a program for bluetooth in order to connect my Nokia 6680 to another device that have a bluetooth?
thanks a lot for your answer!
Sophie

how to change the class name after the project is created.In NetBeans, right click the class name either in the declaration or constructor, select Refactor --> Rename... and follow the dialog.
You can refactor --> rename anything that is not in a guarded block. For those, there are options via the properties window.
db

How to add .js link in custom list form through sharepoint designer 2013

hi friends
so far i was adding jquery code to script editor webpart in custom list form.
but i need to know how to add .js link in custom list form through sharepoint designer 2013
please help me.

Hi,
We can add the "JS Link Property" in the “WebPart” node in the custom list form page through SharePoint designer 2013.
Here is an example for your reference:
<JSLink xmlns="http://schemas.microsoft.com/WebPart/v2/ListForm">~site/Style Library/js/custom.js</JSLink>
Noticed that, we should not lose the 'xmlns="http://schemas.microsoft.com/WebPart/v2/ListForm' attribute.
Best Regards
Dennis Guo
TechNet Community Support

How to add new Attachment category in Projects master creation form

Hi Dudes,
I would like to know that how to add new Attachment category in Projects master creation form.
It defaults as Miscellaneous.
I created new category by navigated Application developer - attachment - category
but i dont know how to assign the above created category for Project master creation form
Can you pls throw some lights into this little dark room?

See http://docs.oracle.com/cd/E18727_01/doc.121/e12897/T302934T458262.htm
Scrool down to the "Category Assignments Window".
This is where you assign an attachment category to your form/function.
See http://erpschools.com/articles/oracle-attachment-functionality-adding-an-attachment-to-a-form for step-by-step screenshots.
Sandeep Gandhi

I need to know how to add closed captioning to a project Captivate 6

I need to know how to add closed captioning in a project in Adobe Captivate 6. It is a software demo single recording. I don't see where to go to create closed captions or change accessilbity preferences.

Hi there,
First thing that you need to do is go to Project > Skin editor > and check the box for Closed Captioning button in playbar.
A slide must have a slide audio or Slide Video to add CC notes in it.
Go to Windows > Slide notes, to view the slide notes panel, and click on + sign to add Closed captioning notes.
Please check this article to add CC in project: http://helpx.adobe.com/captivate/using/slide-notes.html
Check this article for accessibility in Captivate : http://help.adobe.com/en_US/captivate/cp/using/WSc1b83f70210cd101-157ec7f211c7ef6052c-7fff .html
Thanks.

[SOLVED] How to add modules to build with the kernel?

Hello i´m trying to learn how to build my own custom kernel and doing it the arch way https://wiki.archlinux.org/index.php/Ke … raditional. But unfortunately dm-crypt was not included in the kernel so it all failed.
svart_alg% sudo mkinitcpio -k 3.15.6 -c /etc/mkinitcpio.conf -g /boot/initramfs-test.img
==> Starting build: 3.15.6
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [lvm2]
==> ERROR: module not found: ‘dm-snapshot’
-> Running build hook: [encrypt]
==> ERROR: module not found: ‘dm-crypt’
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> WARNING: No modules were added to the image. This is probably not what you want.
==> Creating gzip initcpio image: /boot/initramfs-test.img
==> WARNING: errors were encountered during the build. The image may not be complete.
I have never don any of this before and have no idea of how to add a missing module to the kernel i´m building. So i search on internet and had a very hard time finding a good guide for this but i fond one possible solution. https://www.kernel.org/doc/Documentatio … odules.txt
svart_alg% make -C /home/nigro_alko/Kernel/linux-3.15.6 M=/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in
make: Entering directory ‘/home/nigro_alko/Kernel/linux-3.15.6‘
mkdir: cannot create directory ‘/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in’: Not a directory
scripts/Makefile.build:44: /home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in/Makefile: Not a directory
make[1]: *** No rule to make target ‘/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in/Makefile’. Stop.
Makefile:1310: recipe for target ‘_module_/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in’ failed
make: *** [_module_/home/nigro_alko/Kernel/cryptsetup-1.6.5/Makefile.in] Error 2
make: Leaving directory ‘/home/nigro_alko/Kernel/linux-3.15.6‘
So is there any one that have time to help a lost little newbie i would bee very happy :-)
Last edited by Moosey_Linux (2014-07-29 15:00:40)

karol wrote:Why do you want a custom kernel in the first place?
Moosey_Linux wrote:i´m trying to learn how to build my own custom kernel
Reason enough IMO. But anyway... you refer to the Traditional build method in the wiki, but is it possible you didn't really read it? Or maybe you only skimmed it? Did you run make menuconfig? Did you try to build everything in instead of using modules? That mkinitcpio output suggests that you did.
As suggested there for first-timers, it's a good idea to start with a kernel configuration that is known to work - the Arch config is the obvious choice, but there are other sources e.g. http://kernel-seeds.org/ .

How to add class file to the project in netbean

Hi,
I am not sure if it is the right place to put the question. I just cannot find the way to add my existing java class file into the project in net bean.
Anyone can help?
Thanks a lot

Look at the "classpath" entry on the Index tab in NB's Help. There are entries there that explain how to add existing classes and libraries to a project.

How can i get "CRM JAVA CUSTOMER PROJECT 5.0"

Guys... how can i download the "CRM JAVA CUSTOMER PROJECT 5.0" package

Hello Christopher,
We are having difficulties in finding "CRM JAVA CUSTOMER PROJECT 5.0" too.
Could you please tell how to re-create the Software Component association?
Thanks and Regards,
Reena

How we add parter function in customer sales area usinf xd02

how we add parter function.in xd02.any function module or user exit is there.
it check first whether parter exit or not if not exit then add to atb partner function tab in XD02.any bdc how we add at run time this

u can check with lsmw

How to add rdlc reports to winform project with out throwing any error

Hi,
I have been trying to resolve this problem in all ways.I am working on win forms in VS 2010 using C#.I have designed 4 rdlc reports in a copy of same projects, and now I have been trying to add those rdlc reports to main project(same name of 2 projects).
They are adding but throwing an error as "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible.Verify that the instance name is correct and that
SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) "
at
private void report10th_Load(object sender, EventArgs e)
// TODO: This line of code loads data into the 'dataset10th.attendance' table. You can move, or remove it, as needed.
this.attendanceTableAdapter.Fill(this.dataset10th.attendance);//throws an error here
// TODO: This line of code loads data into the 'dataset10th.regestration' table. You can move, or remove it, as needed.
this.regestrationTableAdapter.Fill(this.dataset10th.regestration);
// TODO: This line of code loads data into the 'dataset10th.tenthclass_marks' table. You can move, or remove it, as needed.
this.tenthclass_marksTableAdapter.Fill(this.dataset10th.tenthclass_marks);
//this.reportViewer1.RefreshReport();
please Help me out how to add these RDLC reports to win forms

Thank you for replaying me sir,
Finally i got to know the answer through your instructions.
I have a look into app.config file and replaced the server name as
<add name="f2.Properties.Settings.smssmsConnectionString" connectionString="Data Source=User-pc\sqlexpress;Initial Catalog=smssms;Integrated Security=True"
providerName="System.Data.SqlClient" />
//to
<add name="f2.Properties.Settings.smssmsConnectionString" connectionString="Data Source=.;Initial Catalog=smssms;Integrated Security=True"
providerName="System.Data.SqlClient" />

How to add jar files to a project?

What is the correct way to add jar files to a project?
Jdev Help has an entry "Adding Files to a Project Using the Add Files or Directories Dialog", but when I goto File->Open as it says, there is no "Add Files or Directories" dialog.
Using JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660 on Linux.

That's not quite what I need, as it does not copy the files into the project, but just creates references to their original location in the filesystem. We want local copies so we can check the whole project into Subversion and not have external dependencies.
Should I just copy the files manually (outside of Jdeveloper)? And what directory should I copy to?
Thanks.

How to add .jar files in my project

Hi all,
i am designing a application where i want to translate some words of my web page to different language
say, i want "search" word to be translated to french language
i have got some .jar files google-api-translate-java-0.4.jar to do this work...
can anyone tell in which folder to put .jar files ,so that it works in my project..
i am using Eclipse SDK 3.3
Thanks

how to add .jar files in my project In your eclipse goto,
Project --> Properties --> Java Buil Path --> Add External Jar
By that u can select your JAR and click OK..........

How to add more fields to Customer sales report

I want to add some fields to customer sales report generating through S_ALR_87012186 like,Invoice number,Invoice date,Tax registration number,tax amount,before tax amount..etc.
Please let us know the best possible method to add these details.

It is not suggested to alter a standard SAP report. Still if the requirement persists, then copy the standard program into a zprogram and add required fields.

How to add favicon to webcenter portal project

Hi All,
I am using jdeveloper version 11.1.1.6.0.
We have developed webcenter portal application .
I want to set favicon(browser icon) for all pages in my application .
I put favicon in Web Content folder and run in local jdeveloper (integrated weblogic )but I am not able to see favicon in all the pages.
Any help is appreciated.

Hi Daniel Merchán ,
I put following code in Page template because of which it is showing icon to all the pages.
          <f:verbatim>
          <link rel="shortcut icon" href="/contextName/favicon.ico" type="image/x-icon"/>
        </f:verbatim>       Is it right way to add icon in webcenter portal project.
Thank you for help.
Edited by: Wecenter Guru on Mar 6, 2013 7:40 PM

How to add modules to my Customer Project?

Similar Messages

Maybe you are looking for