How to add new price break lines to existing PO quotations?

Hi,
I am using a custom interface (to insert quotations data into PO headers/lines interface tables) and PO documents open interface to create PO Quotations in Oracle.
I need to modify this interface to:
1. Update existing price break lines for a quotation line.
2. Add new price break lines to existing quotation line(which may/may not have exsiting price break lines).
Please let me know:
1. What modifications need to be done to the existing code.
2. What values needs to be passed to the action columns in PO_HEADERS_INTERFACE and PO_LINES_INTERFACE for above scenarios?
Any ideas/help will be appreciated.
Thanks
Imran

Hi Imran,
I have done a similar exercise for BPA price breakup.. Let me know if you need that as reference. I can share that :).. Please provide your personal mail id..
Regards,
S.P DASH

Similar Messages

HT1296 how to add new photos without deleting the existing photos in ipad

Hi,
Can anyone tell me how to add new photos/PDF books from my PC to iPad without deleting the exsting data in iPad?

Hello AJ2349
If it is prompting you that it will replace the data on your iPhone, then that is typically the result of syncing with a different computer. The only way you can bypass that is to replace the media on your device and then sync. Now it will only replace items that would be considered purchased items like music, movies, TV shows and Apps and would not delete any pictures from your iPhone. Alternatively you can setup a Shared Photo Stream and then add the Photos there without syncing your iPhone with your computer. Check out the articles below for more information.
iOS: Issues syncing content with multiple computers using iTunes
http://support.apple.com/kb/ts1474
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/ht1535
iCloud: Shared Photo Streams FAQ
http://support.apple.com/kb/HT5903
Regards,
-Norm G.

How to add new payment methods to an existing EDI interface to bank

Hello:
<b>Requirment:</b> Need to add two new payment methods to an existing EDI interface to bank. As of now only USD EFT's are sent. With the new set up we need to be able to send CAD and USD checks and CAD EFT's to that particualr bank.
<b>Scenario:</b> The payment methods are all set up in the payment program. I need two separate variants on the program RFF0EDI1 thats triggers the EDI file. The trigger of the EDI after the payment run should have a different variant... but the message type ought to be the same.
Can some one please exlpain how I should go about setting this up. Thank you.

I figured out the way to do it myself, after poking around the system for hours together.
All I need to do was to make config changes in FI12- define the posting rules and the bank accounts the checks needs to be drawn against. Also adding the payment method "C" in the DME section of the FI12. Next check and see if the Idoc message types have been set to what was required by clicking on "EDI partner profile in the DME section. Also to have different varaints for the program RFF0EDI1 , I just had to goto SE38 select the program and create the new variant. For enabling EDI I had to do some config changes in FBZP- MAINTAIN PAYMENT PROGRAM CONFIGURATION: PAYMENT METHODS in country, Delete the entry made in the "Name of print data set" in the form print section and enter "RFF0EDI" under "Name of the print program" in the form data section. If anybody needs any other information , please let me know. Thanks everyone.

How to add new marketing attribute to the existing marketing attribute set?

Hi all,
I searched for existing forums but I didn't find the required one. I found some using Tcodes ,which is not my requirement. My requirement is to add new marketing attribute to the already existing marketing attribute set. This attribute set is created by my team lead with 4 attributes but now i have to add new attribute to this set so total will become 5 attributes for this attribute set. This has to be done through marketing professional business role. If this is not done through marketing attribute set, then I will go for the transaction where I can add marketing attribute for attribute set.
Please send the details of both marketing professional business role and transaction code.
Your help is highly appreciated.
Thanks,
Baasanthi.

Hi,
SAP CRM Marketing Attributes explained
Path to create Marketing attributes from webui: log in with Marketing Pro role->Marketing->Create->Marketing Attribute
Regards,Sumeet

Add new column at line item level in MIR7 transaction

Hi All,
    I would like to know how to add new column at line item level for GL Account
   tab in MIR7 transaction. could you please let me know how do i add new
   column in MIR7 transaction. Please let me know is there any user exit or any
   other wat to do it.
Thanks,
rao

Hi,
The customer include CI_FMBL can only be used with FMPEP and not with other transaction like FMBB.
Technically speaking, the structure CI_FMBL must be part of many other interfaces like the one use by BAdI 'FMKU_BUDGET_EVNT'.
In order to add such customer fields in FMPEP, you have to use the BAdI 'FMBW_CUSTOMER'. For instruction, you have to look at the note 1356725 and the instruction of paragraph 30. Please read the instruction and start to do your implementation.
With the BAdI 'FMBW_CUSTOMER', you can use the PBO and PAI for handling the customer fields. There is no other place to populate these customer fields. Do you want to use customer fields in FMPEP? Please check note 1356725 for reference.
I believe this answer your inquiry.
Best Regards,
Vanessa Barth.

How to add new line in message on my S890

My stock keyboard in Lenovo S890 doesn't have enter key, is this normal ? How to add new line ?
However this happened only in messages, while using whatsapp the enter key present.

Hi,
the fact that your question is posted in Order Management section, does the move order automatically generated by OM?
nevertheless, i don't think you should (or allowed, in this case) to add a new line in transact move order. Transact move order only queries (not create records) the move order lines eligible to allocate and transact.
So, I don't see why you need to add a new line in transact move order.
You can, however, add a new line in the allocation of the lines, where for instance, you need to have half of the line allocated to one locator, and the other half to another locator
Thanks

How to add new line item using BAPI BAPI_CONTRACT_CHANGE for contract-ME32K

HI Experts,
how to add new line item using BAPI: BAPI_CONTRACT_CHANGE for existing contract.
Requirement:
Already the contract having two line items using ME31K.
Custom program has to add new line items in existing contract.
Thanks,
Sendil

I got the solution:
We can do like this:
1. Get all details using details, BAPI_CONTRACT_GETDETAIL.
2. After getting results, append new line item. Then use your BAPI.
Check this posting program.. where this bapi is used, use the same coding technique.
IDOC_INPUT_PURCONTRACT_CHANGE

How to add new lines

hai Friends , i've some problems, i really don't know how to add new line when typing
Thanks

Sorry you feel that way. It is still a new platform and is improving with every update. Hopefully the next update will make things better for you then.
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

How to add new fields to the system form (Ex.expenses to a/r invoice form)

hi
can any one tell me how to add new fields to the system form (Ex.expenses to a/r invoice form)
i want to add expenses field to system a/r invoice form and connect data base also.
i used the code of samples\11.system form manipulation(vb.net) but i'm not able to get it....so can any one help with code or concepts.
reply soon plz..
thankQ

If I understood you correctly, you are just trying to add new fields to the invoice form and then use them in your form. you should first go and add the field to your tables, which you would do by going to Tool --> User Defined Fields --> Manage User Fields. There are different documents or categories given. For ex. for invoices, Sales Orders you would add your field under the Marketing Documents. If you want the field to be just one per invoice, add it to the Title, otherwise if you want a field per invoice or Sales Order line, add it to the Rows section. Once you have done that then you can just create a edit box or drop down to represent the field and set the datasource for that to your field. If you want example code to do that, let me know.

How to add new column inside ME28 PO Approval Screen?

Hi Abapers,
Can u please explain and give sample code to me, how to add new customise column inside standard Layout ME28 PO Approval Screen.
Waiting for yours reply.
Tks,
S.Muthu.

Hi
Don't need a code or customize.
1- Execute ME28
2- select a line in the ALV
3- type 'F1'
4- Go to technical information
5- Go to Table name 'MEREP_OUTTAB_PURCHDOC_REL' it is a structure
6- Append the new field into that structure using SE11
7- return to ALV in ME28 and change Layout
8- you will find at right your new field, deplace it to left part and it's OK.
REM :your new field will be filled only if the ME28 program is reading your field and passing it to the ALV structure (MEREP_OUTTAB_PURCHDOC_REL)
It worked for me with EKPO-AFNAM
cordially,
Faycel MOSLAH.

How to add new group entry in Cisco Vpn using powershell

I am working on a powershell script to connect cisco vpn using powershell, I am able to connect to vpn but not sure how to add new group to vpn. I am using the following script$vpn_profile = 'Test'
$username = 'TestUser'
$userPassword = ConvertTo-SecureString -String "Password" -AsPlainText -Force
$credentials = new-object -typename System.Management.Automation.PSCredential -argumentlist
$username,$userPassword
$password = $credentials.GetNetworkCredential().Password
Set-Location 'c:\Program Files (x86)\Cisco Systems\VPN Client'
.\vpnclient.exe connect $vpn_profile user $username pwd $password
Write-Host "You Are Connected"
cd "C:\"

Have you entered .\vpnclient.exe /? to see if it will return information about other switches you can use with this executable? Other than connect, I was able to track down a few without actually having the executable (http://www.scribd.com/doc/40108893/Cisco-VPN-Client-Command-Line).
That said, I do not believe that there is a switch that will help you create a connection. These are either done manually through the GUI, or can be likely be added by supplying a properly formatted file in the proper place.
If you're using the version of the Cisco VPN client I think you are, then your connection settings, or profiles, are stored in individual .pcf files somewhere on your computer (likely in the Cisco directory). These are simple, text-based files. Find one
on your computer, save it with another name, and then modify it manually. If you really want to use PowerShell, then use this opportunity to learn how to create and edit basic text files using PowerShell. If you have a standard connection file, then you can
put that file onto remote computers any number of ways. If a .pcf file exists in the proper place when the VPN client is opened, then it likely will not prompt for a new connection.
Update: Added more info; clarified

How to add new field into dynamic internal table

Hello Expert.
how to add new field into dynamic internal table.
PARAMETERS: P_TABLE(30).    "table name
DATA: I_TAB TYPE REF TO DATA.
FIELD-SYMBOLS: <TAB> TYPE standard TABLE.
*Create dynamic FS
create DATA I_TAB TYPE TABLE OF (p_table).
ASSIGN I_TAB->* TO <TAB>.
SELECT * FROM (p_table) INTO TABLE <TAB>.
   here i want to add one more field into <TAB> at LAST position and my
   Field name = field_stype     and
   Field type    = 'LVC_T_STYL'
could you please helpme out .

Hi,
Please find the code below.You can add the field acc to your requirement.
Creating Dynamic internal table
TYPE-POOLS: slis.
FIELD-SYMBOLS: <t_dyntable> TYPE STANDARD TABLE, u201C Dynamic internal table name
               <fs_dyntable>,                     u201C Field symbol to create work area
               <fs_fldval> type any.              u201C Field symbol to assign values
PARAMETERS: p_cols(5) TYPE c.                     u201C Input number of columns
DATA:   t_newtable TYPE REF TO data,
        t_newline TYPE REF TO data,
        t_fldcat   TYPE slis_t_fldcat_alv,
        t_fldcat   TYPE lvc_t_fcat,
        wa_it_fldcat TYPE lvc_s_fcat,
        wa_colno(2) TYPE n,
        wa_flname(5) TYPE c.
Create fields .
DO p_cols TIMES.
    CLEAR wa_it_fldcat.
    move sy-index to wa_colno.
    concatenate 'COL'
                wa_colno
           into wa_flname.
    wa_it_fldcat-fieldname = wa_flname.
    wa_it_fldcat-datatype = 'CHAR'.
    wa_it_fldcat-intlen = 10.
    APPEND wa_it_fldcat TO t_fldcat.
ENDDO.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = t_fldcat
    IMPORTING
      ep_table        = t_newtable.
ASSIGN t_newtable->* TO <t_dyntable>.
Create dynamic work area and assign to FS
CREATE DATA t_newline LIKE LINE OF <t_dyntable>.
ASSIGN t_newline->* TO <fs_dyntable>.
Populating Dynamic internal table
DATA: fieldname(20) TYPE c.
DATA: fieldvalue(10) TYPE c.
DATA: index(3) TYPE c.
DO p_cols TIMES.
    index = sy-index.
    MOVE sy-index TO wa_colno.
    CONCATENATE 'COL'
                wa_colno
           INTO wa_flname.
Set up fieldvalue
    CONCATENATE 'VALUE' index INTO
                fieldvalue.
    CONDENSE    fieldvalue NO-GAPS.
    ASSIGN COMPONENT wa_flname
        OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
    <fs_fldval> = fieldvalue.
ENDDO.
Append to the dynamic internal table
APPEND <fs_dyntable> TO <t_dyntable>.
Displaying dynamic internal table using Grid.
DATA: wa_cat LIKE LINE OF fs_fldcat.
DO p_cols TIMES.
    CLEAR wa_cat.
    MOVE sy-index TO wa_colno.
    CONCATENATE 'COL'
                wa_colno
           INTO wa_flname.
    wa_cat-fieldname = wa_flname.
    wa_cat-seltext_s = wa_flname.
    wa_cat-outputlen = '10'.
    APPEND wa_cat TO fs_fldcat.
ENDDO.
Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      it_fieldcat = fs_fldcat
    TABLES
      t_outtab    = <t_dyntable>.

How to add new fields in Reduced message ( in BD53 )

Hi Experts,
How to add new fields in Reduced message ( in BD53 ), when the required field iis available in Table or Structure and need to be added in BD53 so that we can ALE.
Thanks,
Ninad

Hello,
I think of something like:
First, you create extension, with transaction WE30.
Then, reduce your idoc, your extension should also be proposed.
Do not forget to add this extension in outbound we82, and/or we57 in inbound, and WE20, and find BTE or exit to populate extension.
regards.
F.S.

PLz Help me its urgent, how to add new field in mm01 basic data screen

Hi everyone,
plz tell me how to add new field in mm01 basic data screen,i added that field in basic data screen but when i create a material the data for that field will not save in database table.
Thanks,
murali.

Hi Murali,
when created added a field on the screen by using user exit then after that you have add the field in main table where you will be getting these table in the userexit only, please make sure about this. And i am sure defenitly it will get updated in to the table.
reward if useful.
thanks
abdulsamee.

How to add New field in SMART forms.

How to add new field in the SMART FORMS. Please know me the step.
Please help me soon.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM

How to add new field in the SMART FORMS. Please know me the step.
Please help me soon.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM

How to add new price break lines to existing PO quotations?

Similar Messages

Maybe you are looking for