How to add Test data for a function module

Hi experts,
i want to add test data for a function module . i don't know how to proceed on it . please help me...
with regards,
James...
Valuable answers will be rewarded...

Hi,
- Go to SE37 and execute your FM
- Enter the data you want to pass to FM
- Hit 'Save' button. Enter the meaningful name for your test scenario and save. That's it you have saved the test data.
You can also enter some other test data and save that also. In short, you can save multiple test scenario. Also, you can give multiple test scenario a same name and they do not overwrite each other ( but normally you give different name to differentiate them)
Next time you come to execute the FM again, hit the "test data" button and it will show you all the test scenario you have stored before. Select the one you want to use and it will load the data in FM parameters.
Let me know if you need any other information.
Regards,
RS

Similar Messages

How to get test data for BAPI_PO_CREATE?

Hi friends,
can anybody please tell me how to generate the test data for BAPI_PO_CREATE?

Hi swetha,
Hi,
You could test this scenario with using the Test Message option from RWB.
Or else
You could design the scenario to get the response from BAPI.
i.e BAPI to XI to File or any other application that will be easily avaialble.
But you need receiver system for testing.
Refer the below link it may help you .
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/66dadc6e-0a01-0010-9ea9-bb6d8ca48cc8
Regards
Naveen.

How to insert a code for a function module into a Customer Exit Variable?

I have two Key Figures viz., Net Prchs Rtl, and Net Prchs Unt. Both these Key figures have This Week (TW) and Last Week (LW). There is a variable for This week but there is no variable defined for Last week.
I need to get data in the column LW (Last Week) for both the key figures.
In function module EXIT_SAPLRRS0_001 one of the functions I have is:
Get the previous Fiscal Week
          CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
I need to create a new variable to get values in the Last week column for different key figures and use function 'DATE_TO_PERIOD_CONVERT' in that variable.
Can anyone please explain me the steps as to how to use a function module in a variable so that when the variable is used in a key figure it shows the output.
In other words what I want to know is after creating a Customer exit variable of type Characteristic value how do I refer the above mentioned function moduel and insert the code for the function module into the Customer exit variable that I created.
Thank you.
TR.

Hi Wond,
Thanks a lot for your reply. I understand what you mean but I have never done this before so can you please explain it in a detailed manner. I have the following code:
Get the previous Fiscal Week
          CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
            EXPORTING
              i_date         = ld_date
              i_periv        = lc_periv
            IMPORTING
              e_buper        = ln_poper
              e_gjahr        = ln_bdatj
            EXCEPTIONS
              input_false    = 1
              t009_notfound = 2
              t009b_notfound = 3
              OTHERS         = 4.
          IF sy-subrc <> 0.
            MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          ELSE.
            lc_poper = ln_poper.
            CONCATENATE ln_bdatj lc_poper+1(2) INTO wa_e_t_range-low.
            wa_e_t_range-sign = 'I'.
            wa_e_t_range-opt = 'EQ'.
            APPEND wa_e_t_range TO e_t_range.
          ENDIF.
        ENDIF.
      ENDIF.
    ENDIF.
I believe I should now use the above code in my customer exit variable. If that's right can you please explain me the steps as to how should I do this so that the variable gets populated.
Thank you.
Regards,
TR.

How to generate test data for all the tables in oracle

I am planning to use plsql to generate the test data in all the tables in schema, schema name is given as input parameters, min records in master table, min records in child table. data should be consistent in the columns which are used for constraints i.e. using same column value..
planning to implement something like
execute sp_schema_data_gen (schemaname, minrecinmstrtbl, minrecsforchildtable);
schemaname = owner,
minrecinmstrtbl= minimum records to insert into each parent table,
minrecsforchildtable = minimum records to enter into each child table of a each master table;
all_tables where owner= schemaname;
all_tab_columns and all_constrains - where owner =schemaname;
using dbms_random pkg.
is anyone have better idea to do this.. is this functionality already there in oracle db?

Ah, damorgan, data, test data, metadata and table-driven processes. Love the stuff!
There are two approaches you can take with this. I'll mention both and then ask which
one you think you would find most useful for your requirements.
One approach I would call the generic bottom-up approach which is the one I think you
are referring to.
This system is a generic test data generator. It isn't designed to generate data for any
particular existing table or application but is the general case solution.
Building on damorgan's advice define the basic hierarchy: table collection, tables, data; so start at the data level.
1. Identify/document the data types that you need to support. Start small (NUMBER, VARCHAR2, DATE) and add as you go along
2. For each data type identify the functionality and attributes that you need. For instance for VARCHAR2
a. min length - the minimum length to generate
b. max length - the maximum length
c. prefix - a prefix for the generated data; e.g. for an address field you might want a 'add1' prefix
d. suffix - a suffix for the generated data; see prefix
e. whether to generate NULLs
3. For NUMBER you will probably want at least precision and scale but might want minimum and maximum values or even min/max precision,
min/max scale.
4. store the attribute combinations in Oracle tables
5. build functionality for each data type that can create the range and type of data that you need. These functions should take parameters that can be used to control the attributes and the amount of data generated.
6. At the table level you will need business rules that control how the different columns of the table relate to each other. For example, for ADDRESS information your business rule might be that ADDRESS1, CITY, STATE, ZIP are required and ADDRESS2 is optional.
7. Add table-level processes, driven by the saved metadata, that can generate data at the record level by leveraging the data type functionality you have built previously.
8. Then add the metadata, business rules and functionality to control the TABLE-TO-TABLE relationships; that is, the data model. You need the same DETPNO values in the SCOTT.EMP table that exist in the SCOTT.DEPT table.
The second approach I have used more often. I would it call the top-down approach and I use
it when test data is needed for an existing system. The main use case here is to avoid
having to copy production data to QA, TEST or DEV environments.
QA people want to test with data that they are familiar with: names, companies, code values.
I've found they aren't often fond of random character strings for names of things.
The second approach I use for mature systems where there is already plenty of data to choose from.
It involves selecting subsets of data from each of the existing tables and saving that data in a
set of test tables. This data can then be used for regression testing and for automated unit testing of
existing functionality and functionality that is being developed.
QA can use data they are already familiar with and can test the application (GUI?) interface on that
data to see if they get the expected changes.
For each table to be tested (e.g. DEPT) I create two test system tables. A BEFORE table and an EXPECTED table.
1. DEPT_TEST_BEFORE
     This table has all EMP table columns and a TEST_CASE column.
     It holds EMP-image rows for each test case that show the row as it should look BEFORE the
     test for that test case is performed.
     CREATE TABLE DEPT_TEST_BEFORE
     TESTCASE NUMBER,
     DEPTNO NUMBER(2),
     DNAME VARCHAR2(14 BYTE),
     LOC VARCHAR2(13 BYTE)
2. DEPT_TEST_EXPECTED
     This table also has all EMP table columns and a TEST_CASE column.
     It holds EMP-image rows for each test case that show the row as it should look AFTER the
     test for that test case is performed.
Each of these tables are a mirror image of the actual application table with one new column
added that contains a value representing the TESTCASE_NUMBER.
To create test case #3 identify or create the DEPT records you want to use for test case #3.
Insert these records into DEPT_TEST_BEFORE:
     INSERT INTO DEPT_TEST_BEFORE
     SELECT 3, D.* FROM DEPT D where DEPNO = 20
Insert records for test case #3 into DEPT_TEST_EXPECTED that show the rows as they should
look after test #3 is run. For example, if test #3 creates one new record add all the
records fro the BEFORE data set and add a new one for the new record.
When you want to run TESTCASE_ONE the process is basically (ignore for this illustration that
there is a foreign key betwee DEPT and EMP):
1. delete the records from SCOTT.DEPT that correspond to test case #3 DEPT records.
          DELETE FROM DEPT
          WHERE DEPTNO IN (SELECT DEPTNO FROM DEPT_TEST_BEFORE WHERE TESTCASE = 3);
2. insert the test data set records for SCOTT.DEPT for test case #3.
          INSERT INTO DEPT
          SELECT DEPTNO, DNAME, LOC FROM DEPT_TEST_BEFORE WHERE TESTCASE = 3;
3 perform the test.
4. compare the actual results with the expected results.
     This is done by a function that compares the records in DEPT with the records
     in DEPT_TEST_EXPECTED for test #3.
     I usually store these results in yet another table or just report them out.
5. Report out the differences.
This second approach uses data the users (QA) are already familiar with, is scaleable and
is easy to add new data that meets business requirements.
It is also easy to automatically generate the necessary tables and test setup/breakdown
using a table-driven metadata approach. Adding a new test table is as easy as calling
a stored procedure; the procedure can generate the DDL or create the actual tables needed
for the BEFORE and AFTER snapshots.
The main disadvantage is that existing data will almost never cover the corner cases.
But you can add data for these. By corner cases I mean data that defines the limits
for a data type: a VARCHAR2(30) name field should have at least one test record that
has a name that is 30 characters long.
Which of these approaches makes the most sense for you?

How to extract the data by using function module?

hi experts,
what are the steps i have to fallow to extract the data from R/3 by using FUNCTION MODULE.
thanks & regards
venkat

Hi,
Extracting data from R/3 extract structure thru function modules
You can proceed with create function module using SE37, thereu2019s sample in system RSAX_BIW_GET_DATA_SIMPLE,
You need to know the logic how to populate the structure,
after that RSO2, create datasource specify extract structure and
function module,
activate and replicate to bw.
Chheers
Raj

How to give constant data in RFC function module

Hello;
    I have created a BAPI which doesnt have any data i want to put some data in that BAPI so tried with constants but it is not working..how put hard code data in function module..when i put the data it gives error stating that 'Function-Pool' should not be the first statement..
Thanks and Regards,
   Om.

HI;
Ya I did it but still i am facing the same problem...can u just tel me is this right
DATA: Total TYPE p DECIMALS 3.
               CONSTANTS: BEGIN OF sampledata,
                          CARRID TYPE c LENGTH 5 VALUE 'AA',
                          SEATSMAX TYPE i value '600',
                          SEATSOCC TYPE i value '500'.
              CONSTANTS end OF sampledata.
Export
     CARRID = 'AA'
     CURRENCY = 'USD'
     SEATSMAX = '600'
     SEATSOCC = '500'
Total = 100 * ( seatsocc / seatsmax ).

How to add "CC" field in this function module SO_NEW_DOCUMENT_SEND_API1

Hi,
I have a receiver field in this function module SO_NEW_DOCUMENT_SEND_API1.
But i wanted to add a CC field also to this.. How do i do it???
Thanks & regards,
Aswin

when you add the receiver entry in the receivers table, just make the parameter copy as 'X'. This will put the receiver in CC.
And if you want to put it in BCC use the parameter Blind copy.
Regards,
Lalit Mohan Gupta

How to creat web service for a function module?

who can provide me some resource on the topic.
thanks
Johnney.

Hi John,
http://help.sap.com/saphelp_nw04/helpdata/en/e9/ae1b9a5d2cef4ea4b579f19d902871/content.htm
Reward Points if Useful
All the Best
Gokul

Test Data for Function module

Hi all , I want to define test data for the function module . Can any one help how or where to define it.
- Neo

Hi Neo,
Are u talking abt testing a functional module separately without implementing in a program.
If this is the case, then do the following:
1.go to se37
2.write name of functional module and press F8.
3.there would be a screen which would give you place to write in values for the input parameters including internal table rows.
4.fill in and press F8.
If I have gt u wrong ,then pls clarify.
Rgds,
Shweta

Test data for the ABAP Function

Hello Experts,
Can you please provide me the valid test data for the function modules?
    /SCA/BIF_WORKINPROCESS_BO
                       and
    /SCA/BIF_WORKORDINF_MS
Thanks and Regards,
Kuldeep Verma

Hi ,
If u want to use the same data to test your function module then we can use this button. To use this button simply press F8 --> give the test data --> And then save this test in the test directory using the SAVE button.
--> Next time when retest it then their is no need to give all the other information just press Test Data directory..
Hope you understand.
Kuldeep

Creating test data for a problem

Hi,
I've been using this forum for a few months and it has been extremely useful. The problem is that I actually have no idea how to create test data for a specific problem. I've tried googling but to no avail. I have had other users create test data for some of my problems using a 'WITH' statement but it would be great if someone could explain the logic behind it and how to approach a specific problem where in the query I use multiple tables.
I know it's probably a stupid question and I'm relatively new to sql but it would help a lot if I understood the process.
Banner:
Oracle Database 11g Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
"CORE 11.2.0.2.0 Production"
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production

Look at the point 3 and 4. You can also follow other points too.
Please consider the following when you post a question. This would help us help you better
1. New features keep coming in every oracle version so please provide Your Oracle DB Version to get the best possible answer.
You can use the following query and do a copy past of the output.
select * from v$version 2. This forum has a very good Search Feature. Please use that before posting your question. Because for most of the questions
that are asked the answer is already there.
3. We dont know your DB structure or How your Data is. So you need to let us know. The best way would be to give some sample data like this.
I have the following table called sales
with sales
as
      select 1 sales_id, 1 prod_id, 1001 inv_num, 120 qty from dual
      union all
      select 2 sales_id, 1 prod_id, 1002 inv_num, 25 qty from dual
select *
from sales 4. Rather than telling what you want in words its more easier when you give your expected output.
For example in the above sales table, I want to know the total quantity and number of invoice for each product.
The output should look like this
Prod_id   sum_qty   count_inv
1         145       2 5. When ever you get an error message post the entire error message. With the Error Number, The message and the Line number.
6. Next thing is a very important thing to remember. Please post only well formatted code. Unformatted code is very hard to read.
Your code format gets lost when you post it in the Oracle Forum. So in order to preserve it you need to
use the {noformat}{noformat} tags.
The usage of the tag is like this.
<place your code here>\
7. If you are posting a *Performance Related Question*. Please read
   {thread:id=501834} and {thread:id=863295}.
   Following those guide will be very helpful.
8. Please keep in mind that this is a public forum. Here No question is URGENT.
   So use of words like *URGENT* or *ASAP* (As Soon As Possible) are considered to be rude.

How to Get Missing Dates for Each Support Ticket In My Query?

Hello -
I'm really baffled as to how to get missing dates for each support ticket in my query. I did a search for this and found several CTE's however they only provide ways to find missing dates in a date table rather than missing dates for another column
in a table. Let me explain a bit further here -
I have a query which has a list of support tickets for the month of January. Each support ticket is supposed to be updated daily by a support rep, however that isn't happening so the business wants to know for each ticket which dates have NOT been
updated. So, for example, I might have support ticket 44BS which was updated on 2014-01-01, 2014-01-05, 2014-01-07. Each time the ticket is updated a new row is inserted into the table. I need a query which will return the missing dates per
each support ticket.
I should also add that I DO NOT have any sort of admin nor write permissions to the database...none at all. My team has tried and they won't give 'em. So proposing a function or storable solution will not work. I'm stuck with doing everything
in a query.
I'll try and provide some sample data as an example -
CREATE TABLE #Tickets
TicketNo VARCHAR(4)
,DateUpdated DATE
INSERT INTO #Tickets VALUES ('44BS', '2014-01-01')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-05')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-07')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-03')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-09')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-11')
So for ticket 44BS, I need to return the missing dates between January 1st and January 5th, again between January 5th and January 7th. A set-based solution would be best.
I'm sure this is easier than i'm making it. However, after playing around for a couple of hours my head hurts and I need sleep. If anyone can help, you'd be a job-saver :)
Thanks!!

CREATE TABLE #Tickets (
TicketNo VARCHAR(4)
,DateUpdated DATETIME
GO
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-01'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-05'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-07'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-03'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-09'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-11'
GO
GO
SELECT *
FROM #Tickets
GO
GO
CREATE TABLE #tempDist (
NRow INT
,TicketNo VARCHAR(4)
,MinDate DATETIME
,MaxDate DATETIME
GO
CREATE TABLE #tempUnUserdDate (
TicketNo VARCHAR(4)
,MissDate DATETIME
GO
INSERT INTO #tempDist
SELECT Row_Number() OVER (
ORDER BY TicketNo
) AS NROw
,TicketNo
,Min(DateUpdated) AS MinDate
,MAx(DateUpdated) AS MaxDate
FROM #Tickets
GROUP BY TicketNo
SELECT *
FROM #tempDist
GO
-- Get the number of rows in the looping table
DECLARE @RowCount INT
SET @RowCount = (
SELECT COUNT(TicketNo)
FROM #tempDist
-- Declare an iterator
DECLARE @I INT
-- Initialize the iterator
SET @I = 1
-- Loop through the rows of a table @myTable
WHILE (@I <= @RowCount)
BEGIN
-- Declare variables to hold the data which we get after looping each record
DECLARE @MyDate DATETIME
DECLARE @TicketNo VARCHAR(50)
,@MinDate DATETIME
,@MaxDate DATETIME
-- Get the data from table and set to variables
SELECT @TicketNo = TicketNo
,@MinDate = MinDate
,@MaxDate = MaxDate
FROM #tempDist
WHERE NRow = @I
SET @MyDate = @MinDate
WHILE @MaxDate > @MyDate
BEGIN
IF NOT EXISTS (
SELECT *
FROM #Tickets
WHERE TicketNo = @TicketNo
AND DateUpdated = @MyDate
BEGIN
INSERT INTO #tempUnUserdDate
VALUES (
@TicketNo
,@MyDate
END
SET @MyDate = dateadd(d, 1, @MyDate)
END
SET @I = @I + 1
END
GO
SELECT *
FROM #tempUnUserdDate
GO
GO
DROP TABLE #tickets
GO
DROP TABLE #tempDist
GO
DROP TABLE #tempUnUserdDate
Thanks,
Shridhar J Joshi
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'>

[svn] 889: Add test case for BLZ-82 where HttpService should return multiple headers with the same name .

Revision: 889
Author: [email protected]
Date: 2008-03-21 13:08:05 -0700 (Fri, 21 Mar 2008)
Log Message:
Add test case for BLZ-82 where HttpService should return multiple headers with the same name.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-82
Added Paths:
blazeds/trunk/qa/apps/qa-regress/remote/MultipleHeadersTest.jsp
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/proxyService/httpservice/MultiHe aderTest.mxml

Hi again,
this may be old news to some people, but I just realized we can have the desired benefits I originally listed (encapsulation, reuse, maintainability, security) TODAY by using pipelined functions and using the table() function in Apex report region queries.
So the report query basically becomes, for example (if get_employees is a pipelined function)
select * from table(my_package.get_employees(:p1_deptno))
The only downside compared to a (weakly typed) sys_refcursor is that you have to define the type you are returning in your package spec (or as an SQL type). So it's a bit more coding, but it's still worth it for the other benefits it provides.
I like Apex even better now! :-)
- Morten

How to generate test data

Hi
I need to generate some test data and would like to know if there are any built functions in SQL Server 2012 that let you do that apart from using loops. In PostgreSQL I use different built in functions to achieve that for example the following statement
creates the test data for me, if any one can show me how I can do that using T-SQL
CREATE TABLE domain AS SELECT generate_series(1,100000) AS domain_id, substr('abcdefghijklmnopqrstuvwxyz',1, (random()*26)::integer) || '.com' AS domain_name;
And also I would like to know how do you get help on syntax in T-SQL, for example in PostgreSQL the following commands show you help etc so are there any similar commands in T-SQL ?
\h ALTER TABLE ( Will show you full syntax for ALTER TABLE )
\dt ( Will detail all the tables in the current Schema )
Thanks a lot
Rgds
T

The two T-SQL suggestions are great and probably the simple answer you're looking for. I wrote a blog article about using the VS data generation feature, as suggested by Chuck, to do some nice stuff here if you want to check that out:
http://blogs.msdn.com/b/samlester/archive/2012/08/04/creating-complex-test-databases-part-2-creating-a-database-with-1-billion-random-rows.aspx
Thanks,
Sam Lester (MSFT)
My Blog
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

How to create test data in SHDB transaction ?

Hi,
In SHDB transaction I have captured the recording of AS01 transaction. Now there is a tab called "test data" in SHDB transaction. I clicked on that and gave a text document name called "c:\asset.txt" . Now it is showing status like "test data has already been saved into c:\asset.txt". Now how should I create test data for this?
Please reply soon...............

Hi,
Can anyone pls explain what the tab "Test data" will function in SHDB transaction?

How to add Test data for a function module

Similar Messages

Maybe you are looking for