How to analyse the following file generated by a JDK crash???

Hi Guys, I am a newbie and needs some pointers in analysing the following file. This file is generated after JDK crashed. Kindly have a look and please suggest which tool can be used
to analyse it. I am pasting a snippet of the content. Kindly have a look. Just to tell you I tried using Visual VM, IBM Thread and Monitor analser, TDA tools, but none of them helps.
Kindly help as I am very keen to go into the depth of this issue.
# A fatal error has been detected by the Java Runtime Environment:
# SIGSEGV (0xb) at pc=0x00002aac385b059d, pid=8835, tid=1126340928
# JRE version: 6.0_20-b02
# Java VM: Java HotSpot(TM) 64-Bit Server VM (16.3-b01 mixed mode linux-amd64 )
# Problematic frame:
# C [libFoundation_6_0.so+0x5b059d] ZNK5viidy11IdRecordImp12getBioRecordENS8ModalityENS_8InstanceEb+0x47
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
--------------- T H R E A D ---------------
Current thread (0x00000000457de000): JavaThread "http-8090-7" daemon [_thread_in_native, id=9008, stack(0x0000000043129000,0x000000004322a000)]
siginfo:si_signo=SIGSEGV: si_errno=0, si_code=1 (SEGV_MAPERR), si_addr=0x000000000000001f
Registers:
RAX=0x0000000000650002, RBX=0x00002aac9030cb70, RCX=0x00002aac9030cb80, RDX=0xffffffffffffffff
RSP=0x0000000043226d60, RBP=0x0000000000000002, RSI=0x00002aac9030cb80, RDI=0x00002aac9030cb78
R8 =0x0000000000000000, R9 =0x0000000000000000, R10=0x00002aac68b41330, R11=0x00002aac385a7b66
R12=0x0000000000000065, R13=0x0000000000000000, R14=0x0000000000000001, R15=0x0000000000000097
RIP=0x00002aac385b059d, EFL=0x0000000000010286, CSGSFS=0x0000000000000033, ERR=0x0000000000000004
TRAPNO=0x000000000000000e
Top of Stack: (sp=0x0000000043226d60)
0x0000000043226d60: 0000000043226ec8 0000000043226ec4
0x0000000043226d70: 00002aac6876de20 0000000043227520
0x0000000043226d80: 00002aac8d3e27d0 0000000043227540
0x0000000043226d90: 0000000043227548 00002aac8c84b840
0x0000000043226da0: 00002aac8c84b840 0000000043226dd8
0x0000000043226db0: 00002aac8d3e27d0 0000000043227548
0x0000000043226dc0: 0000000043227548 00002aac8c84b840
0x0000000043226dd0: 0000000000000000 0000000000000000
0x0000000043226de0: 00002aac8d3e27a0 00002aac8cb3f820
0x0000000043226df0: 00002aac8d3e27d0 0000000000000005
0x0000000043226e00: 00002aac8c84b880 00002aac8c84b884
0x0000000043226e10: 00002aac8c84b884 0000000043226f90
0x0000000043226e20: 000000000000009c 0000000043227540
0x0000000043226e30: 0000000000000097 000000328ea7276b
0x0000000043226e40: 000000000000009b 00002aac8cbd2ed0
0x0000000043226e50: 000000000000009d 00002aac3862454b
0x0000000043226e60: 0000000000000098 0000000000000000
0x0000000043226e70: 0000000000000000 00002aac8d3e27a0
0x0000000043226e80: 0000000000000000 0000000043226f90
0x0000000043226e90: 0000000043226fd0 0000000043227540
0x0000000043226ea0: 000000000000006a 000000328ea7276b
0x0000000043226eb0: 0000000000000000 0000000043226f90
0x0000000043226ec0: 0000006a43226fd0 3ecbe72100000002
0x0000000043226ed0: 000000000000006a 0000000043226f58
0x0000000043226ee0: 00002aac8c84b810 0000000043226f50
0x0000000043226ef0: 0000000043226fd0 0000000043227540
0x0000000043226f00: 000000000000006a 00002aac90e96708
0x0000000043226f10: 00002aac90e96708 00000000432273d0
0x0000000043226f20: 0000000000000002 0000000000000001
0x0000000043226f30: 0000000000000097 00002aac385b1404
0x0000000043226f40: 0000009d00000002 0000000043227520
0x0000000043226f50: 00002aac006a0002 00002aac90000020
Instructions: (pc=0x00002aac385b059d)
0x00002aac385b058d: 89 f1 eb 0c 48 89 d1 48 8b 52 10 48 85 d2 74 0e
0x00002aac385b059d: 3b 42 20 76 ef 48 8b 52 18 48 85 d2 75 f2 48 89
Stack: [0x0000000043129000,0x000000004322a000], sp=0x0000000043226d60, free space=3f70000000000000018k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [libFoundation_6_0.so+0x5b059d] ZNK5viidy11IdRecordImp12getBioRecordENS8ModalityENS_8InstanceEb+0x47
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
J XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX(JJJJJ)Z
J XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX(Ljava/util/List;Ljava/util/List;)D
j XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX(Ljava/util/List;Ljava/util/List;)D+23
j sun.reflect.GeneratedMethodAccessor30.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+52
J java.lang.reflect.Method.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;
j org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(Ljava/lang/Object;Ljava/lang/reflect/Method;[Ljava/lang/Object;)Ljava/lang/Object;+7
j org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint()Ljava/lang/Object;+12
j org.springframework.aop.framework.ReflectiveMethodInvocation.proceed()Ljava/lang/Object;+19
j org.springframework.remoting.support.RemoteInvocationTraceInterceptor.invoke(Lorg/aopalliance/intercept/MethodInvocation;)Ljava/lang/Object;+58
j org.springframework.aop.framework.ReflectiveMethodInvocation.proceed()Ljava/lang/Object;+101
j org.springframework.aop.framework.JdkDynamicAopProxy.invoke(Ljava/lang/Object;Ljava/lang/reflect/Method;[Ljava/lang/Object;)Ljava/lang/Object;+327
j $Proxy6.verifyFinger(Ljava/util/List;Ljava/util/List;)D+20
j sun.reflect.GeneratedMethodAccessor30.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+52
J java.lang.reflect.Method.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;
J com.caucho.hessian.server.HessianSkeleton.invoke(Ljava/lang/Object;Lcom/caucho/hessian/io/AbstractHessianInput;Lcom/caucho/hessian/io/AbstractHessianOutput;)V
j com.caucho.hessian.server.HessianSkeleton.invoke(Lcom/caucho/hessian/io/AbstractHessianInput;Lcom/caucho/hessian/io/AbstractHessianOutput;)V+7
j org.springframework.remoting.caucho.HessianExporter.doInvoke(Lcom/caucho/hessian/server/HessianSkeleton;Ljava/io/InputStream;Ljava/io/OutputStream;)V+387
j org.springframework.remoting.caucho.HessianExporter.invoke(Ljava/io/InputStream;Ljava/io/OutputStream;)V+16
j org.springframework.remoting.caucho.HessianServiceExporter.handleRequest(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;)V+60
J org.springframework.web.servlet.DispatcherServlet.doDispatch(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;)V
j org.springframework.web.servlet.DispatcherServlet.doService(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;)V+235
j org.springframework.web.servlet.FrameworkServlet.processRequest(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;)V+111
j org.springframework.web.servlet.FrameworkServlet.doPost(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;)V+3
j javax.servlet.http.HttpServlet.service(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;)V+139
j javax.servlet.http.HttpServlet.service(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;)V+30
j org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;)V+376
j org.apache.catalina.core.ApplicationFilterChain.doFilter(Ljavax/servlet/ServletRequest;Ljavax/servlet/ServletResponse;)V+101
j org.apache.catalina.core.StandardWrapperValve.invoke(Lorg/apache/catalina/connector/Request;Lorg/apache/catalina/connector/Response;)V+804
j org.apache.catalina.core.StandardContextValve.invoke(Lorg/apache/catalina/connector/Request;Lorg/apache/catalina/connector/Response;)V+365
j org.apache.catalina.core.StandardHostValve.invoke(Lorg/apache/catalina/connector/Request;Lorg/apache/catalina/connector/Response;)V+64
j org.apache.catalina.valves.ErrorReportValve.invoke(Lorg/apache/catalina/connector/Request;Lorg/apache/catalina/connector/Response;)V+6
j org.apache.catalina.core.StandardEngineValve.invoke(Lorg/apache/catalina/connector/Request;Lorg/apache/catalina/connector/Response;)V+42
j org.apache.catalina.connector.CoyoteAdapter.service(Lorg/apache/coyote/Request;Lorg/apache/coyote/Response;)V+158
j org.apache.coyote.http11.Http11Processor.process(Ljava/net/Socket;)V+514
j org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Ljava/net/Socket;)Z+82
j org.apache.tomcat.util.net.JIoEndpoint$Worker.run()V+41
j java.lang.Thread.run()V+11
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x00002aac89c91800 JavaThread "http-8090-100" daemon [_thread_in_native, id=9101, stack(0x000000004dfbf000,0x000000004e0c0000)]
0x00002aac8a81c000 JavaThread "http-8090-99" daemon [_thread_in_native, id=9100, stack(0x000000004debe000,0x000000004dfbf000)]
0x00002aac8a81a800 JavaThread "http-8090-98" daemon [_thread_in_native, id=9099, stack(0x000000004ddbd000,0x000000004debe000)]
0x00002aac8a818800 JavaThread "http-8090-97" daemon [_thread_in_native, id=9098, stack(0x000000004dcbc000,0x000000004ddbd000)]
0x00002aac8a816800 JavaThread "http-8090-96" daemon [_thread_in_native, id=9097, stack(0x000000004dbbb000,0x000000004dcbc000)]
0x00002aac89c96000 JavaThread "http-8090-95" daemon [_thread_in_native, id=9096, stack(0x000000004daba000,0x000000004dbbb000)]
0x00002aac89c95000 JavaThread "http-8090-94" daemon [_thread_blocked, id=9095, stack(0x000000004d9b9000,0x000000004daba000)]
0x00002aac89c93800 JavaThread "http-8090-93" daemon [_thread_blocked, id=9094, stack(0x000000004d8b8000,0x000000004d9b9000)]
0x00002aac89c92800 JavaThread "http-8090-92" daemon [_thread_blocked, id=9093, stack(0x000000004d7b7000,0x000000004d8b8000)]
0x00002aac89d36000 JavaThread "http-8090-91" daemon [_thread_in_native, id=9092, stack(0x0000000040f22000,0x0000000041023000)]
0x00002aac89db5000 JavaThread "http-8090-90" daemon [_thread_in_native, id=9091, stack(0x000000004d6b6000,0x000000004d7b7000)]
0x00002aac89c7a000 JavaThread "http-8090-89" daemon [_thread_in_native, id=9090, stack(0x000000004d5b5000,0x000000004d6b6000)]
0x00002aac89c78000 JavaThread "http-8090-88" daemon [_thread_in_native, id=9089, stack(0x000000004d4b4000,0x000000004d5b5000)]
0x00002aac89c76800 JavaThread "http-8090-87" daemon [_thread_in_native, id=9088, stack(0x000000004d3b3000,0x000000004d4b4000)]
0x00002aac89d0b800 JavaThread "http-8090-86" daemon [_thread_in_native, id=9087, stack(0x000000004d2b2000,0x000000004d3b3000)]
0x00002aac89ddc800 JavaThread "http-8090-85" daemon [_thread_in_native, id=9086, stack(0x000000004d1b1000,0x000000004d2b2000)]
0x00002aac89dda800 JavaThread "http-8090-84" daemon [_thread_in_native, id=9085, stack(0x000000004d0b0000,0x000000004d1b1000)]
0x00002aac89dcf800 JavaThread "http-8090-83" daemon [_thread_in_native, id=9084, stack(0x000000004cfaf000,0x000000004d0b0000)]
0x00002aac89dce800 JavaThread "http-8090-82" daemon [_thread_in_native, id=9083, stack(0x000000004ceae000,0x000000004cfaf000)]
0x00002aac89cbd000 JavaThread "http-8090-81" daemon [_thread_in_native, id=9082, stack(0x000000004cdad000,0x000000004ceae000)]
Thanks for your help!
Regards
Ash

The crash is in the library libFoundation_6_0.so in the method ZNK5viidy11IdRecordImp12getBioRecordENS8ModalityENS_8InstanceEb+0x47
I suggest you contact the vendor for this library and get support from them.
If the problem is repeatable, you can attach a gdb debugger and see where the fault occurs though you may need the source for this library to make any sense of it.

Similar Messages

  • SAP GRC - Exporting rules from GRC - how to read the .txt file generated ?

    Hi there,
    I am using GRC Compliance Calibrator and have downloaded the default Global rules defined in Compliance Calibrator using the Rule Architect -> Utilities->Export rules.
    This gave me a massive txt file with a lot of tables and data. Reading through this forum, I did figure out that lines starting with M are the header rows for the tables and D rows are the data rows.
    My question is, how do i figure out what each of the Virsa tables stand for (e.g. VIRSA_CC_FUNCACT, VIRSA_CC_FUNCPRM) ?
    I tried SE11 and looking up these tables in the SAP environment associated with this CC install, however it says that the table was not found.
    Could someone please point me to :
    A) A list of the common Virsa CC tables and their descriptions ?
    OR
    B) How can i find what these tables stand for online or in the SAP environment?
    Many thanks !

    Hi Santosh,
    There is no option available to export only the customized rule sets to another system. The export rules option will give all the rules that are available in that system.
    You can do in the below manner
    a) Extract the data from Export rules
    b) Open that text file in a spreadsheet and edit the spreadsheet [Remove the rule sets & the rules not required in production system]
    c) Save the spreadsheet in UTF-8 text file
    d) Upload them in the production.
    The above procedure is bit complex and cumbersome -as changing the text file is risky. Even a space will not generate any rules in the RAR. I would suggest rename the new rule set in different naming convention and upload in your test environment before uploading the text files  in Production.
    But, using the Export and Import option you cannot upload only the customized rule set as the extract happens for the entire rules sets available in the system.
    Thanks and Best Regards,
    Srihari.K

  • How to use the build file generated by Jdev to automate bpel deployment

    Hi everyone I am trying to deploy bpel jar files and human task ear files using ant. When i use the ant which is generated by Jdev I am gettinng an error
    C:\Documents and Settings\254876\Desktop\BPEL_ANT>ant
    Buildfile: build.xml
    deployTaskForm:
    BUILD FAILED
    C:\Documents and Settings\254876\Desktop\BPEL_ANT\build.xml:39: Could not create
    task or type of type: deployTaskForm.
    Ant could not find the task or a class this task relies upon.
    This is common and has a number of causes; the usual
    solutions are to read the manual pages then download and
    install needed JAR files, or fix the build file:
    - You have misspelt 'deployTaskForm'.
    Fix: check your spelling.
    - The task needs an external JAR file to execute
    and this is not found at the right place in the classpath.
    Fix: check the documentation for dependencies.
    Fix: declare the task.
    - The task is an Ant optional task and the JAR file and/or libraries
    implementing the functionality were not found at the time you
    yourself built your installation of Ant from the Ant sources.
    Fix: Look in the ANT_HOME/lib for the 'ant-' JAR corresponding to the
    task and make sure it contains more than merely a META-INF/MANIFEST.MF.
    If all it contains is the manifest, then rebuild Ant with the needed
    libraries present in ${ant.home}/lib/optional/ , or alternatively,
    download a pre-built release version from apache.org
    - The build file was written for a later version of Ant
    Fix: upgrade to at least the latest release version of Ant
    - The task is not an Ant core or optional task
    and needs to be declared using <taskdef>.
    - You are attempting to use a task defined using
    <presetdef> or <macrodef> but have spelt wrong or not
    defined it at the point of use
    Remember that for JAR files to be visible to Ant tasks implemented
    in ANT_HOME/lib, the files must be in the same directory or on the
    classpath
    Please neither file bug reports on this problem, nor email the
    Ant mailing lists, until all of these causes have been explored,
    as this is not an Ant bug.

    Ensure JDEV and SOA versions are in sync.

  • How to rename the XML file generated during payment run

    Hi,
    We have a requirement to rename the XML file during payment run, format some fields of XML file and upload it onto Application server with the new XML file name. All these activities need to be performed during payment run F110.
    Please let know if there is any User exit or Enahancement to achieve these functionalities.
    Thanks !
    Regards,
    Ravinder

    Hi,
    We have achieved the second functionality also i.e. populating the additional nodes or custom nodes of an extended tree.
    This is what we have done...
    We have copied the standard exit FM: DMEE_EXIT_TEMPLATE_EXTEND_ABA into a custom one and assigned it to each (custom) node in 'Source' tab. Line item text FPAYP-SGTXT will not be returned via this FM, so we fetched it explicitly from BSEG table using the input FPAYP-DOC2R (this field will have the company code, document number, fiscal year and item no, all concatenated).
    Thanks,
    /Ravinder

  • How do I get my videos to upload from my sony handy cam when I get the message The following file could not be imported.  The file is in an unrecognized format. I am using a macbook pro version 10.9.3, I have 411 gb free space, it worked before I updated

    How do I get my videos to upload from my sony handy cam when I get the message The following file could not be imported.  The file is in an unrecognized format. I am using a macbook pro version 10.9.3, I have 411 gb free space, it worked before I downloaded the latest update for iphoto.

    You may be able to download and install the update from here: Digital Camera RAW Compatibility 6.01
    If I upgrade to Yosemite will I be forced to go to the new Photos program
    No. After upgrading (and of course make a back up first) you will need to update iPhoto to v9.6.1 (you won't be able to do this prior to upgrading). Here's how:
    Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
    If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
    Install the App from the App Store.
    Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
    Photos is v1 of a new app, as yes it's not as mature as iPhoto. It uses a different technology for working with external editors. That requires Adobe to write an extension to let it hook into the new app. Not done yet, neither has anyone else.
    Going forward: iPhoto will run on OS 10.10., but there is no guarantee for subsequent versions of the OS. You might want to factor that into your anger term thinking.

  • Unable to compile the Java Files generated by JAXB

    Hi,
    I have generated the Java Files for a DTD and .xjs file using JAXB. But when i tyr to compile the .java files generated i am getting errors.
    My DTD file is addctq.dtd
    <?xml version="1.0" encoding="UTF-8"?>
    <!ELEMENT AddCtq (Ctq*)>
    <!ELEMENT Ctq (PartNumber ,PartDescription,CtqDescription,CtqType,ProductLine,Supplier,Ppctq,Ctp,Ctc,CtqCode1,CtqCode2,CtqCode3,Commodity,SubCommodity,UnitOfMeasure,Client,SamplingFrequency,Remarks,VariableData)>
    <!ELEMENT VariableData (SubGroupSize, Specification,Nominal,Usl,Ual,Lal,Lsl,Zal,RangeVal?,RangeAlarmVal?)>
    <!ELEMENT PartNumber (#PCDATA)>
    <!ATTLIST PartNumber new CDATA #REQUIRED >
    <!ELEMENT PartDescription (#PCDATA)>
    <!ELEMENT CtqDescription (#PCDATA)>
    <!ELEMENT CtqType (#PCDATA)>
    <!ELEMENT ProductLine (#PCDATA)>
    <!ELEMENT Supplier (#PCDATA)>
    <!ELEMENT Ppctq (#PCDATA)>
    <!ELEMENT Ctp (#PCDATA)>
    <!ELEMENT Ctc (#PCDATA)>
    <!ELEMENT CtqCode1 (#PCDATA)>
    <!ELEMENT CtqCode2 (#PCDATA)>
    <!ELEMENT CtqCode3 (#PCDATA)>
    <!ELEMENT Commodity (#PCDATA)>
    <!ELEMENT SubCommodity (#PCDATA)>
    <!ELEMENT UnitOfMeasure (#PCDATA)>
    <!ELEMENT Client (#PCDATA)>
    <!ELEMENT SamplingFrequency (#PCDATA)>
    <!ELEMENT Remarks (#PCDATA)>
    <!ELEMENT SubGroupSize (#PCDATA)>
    <!ELEMENT Specification (#PCDATA)>
    <!ELEMENT Nominal (#PCDATA)>
    <!ELEMENT Usl (#PCDATA)>
    <!ELEMENT Ual (#PCDATA)>
    <!ELEMENT Lal (#PCDATA)>
    <!ELEMENT Lsl (#PCDATA)>
    <!ELEMENT Zal (#PCDATA)>
    <!ELEMENT RangeVal (#PCDATA)>
    <!ELEMENT RangeAlarmVal (#PCDATA)>
    and the .xjs file i created is addctq.xjs
    <?xml version="1.0" encoding="UTF-8" ?>
    <xml-java-binding-schema version="1.0-ea">
    <options package="com.geindustrial.sqms"/>
    <element name="AddCtq" type="class" root="true">
    <content>
    <element-ref name="Ctq"/>
    </content>
    </element>
    <element name="Ctq" type="class">
    <content>
         <element-ref name="PartNumber"/>
         <element-ref name="PartDescription"/>
         <element-ref name="CtqDescription"/>
         <element-ref name="CtqType"/>
         <element-ref name="ProductLine"/>
         <element-ref name="Supplier"/>
         <element-ref name="Ppctq"/>
         <element-ref name="Ctp"/>
         <element-ref name="Ctc"/>
         <element-ref name="CtqCode1"/>
         <element-ref name="CtqCode2"/>
         <element-ref name="CtqCode3"/>
         <element-ref name="Commodity"/>
         <element-ref name="SubCommodity"/>
         <element-ref name="UnitOfMeasure"/>
         <element-ref name="Client"/>
         <element-ref name="SamplingFrequency"/>
         <element-ref name="Remarks"/>
         <element-ref name="VariableData"/>
    </content>      
    </element>
    <element name="VariableData" type="class">
    <content>
    <element-ref name="SubGroupSize"/>
    <element-ref name="Specification"/>
    <element-ref name="Nominal"/>
    <element-ref name="Usl"/>
    <element-ref name="Ual"/>
    <element-ref name="Lal"/>
    <element-ref name="Lsl"/>
    <element-ref name="Zal"/>
    </content>
    </element>
    <element name="PartNumber" type="value">
    <attribute name="new"/>
    </element>
    <element name="PartDescription" type="value">
    </element>
    <element name="CtqDescription" type="value">
    </element>
    <element name="CtqType" type="value">
    </element>
    <element name="ProductLine" type="value">
    </element>
    <element name="Supplier" type="value">
    </element>
    <element name="Ppctq" type="value">
    </element>
    <element name="Ctp" type="value">
    </element>
    <element name="Ctc" type="value">
    </element>
    <element name="CtqCode1" type="value">
    </element>
    <element name="CtqCode2" type="value">
    </element>
    <element name="CtqCode3" type="value">
    </element>
    <element name="Commodity" type="value">
    </element>
    <element name="SubCommodity" type="value">
    </element>
    <element name="UnitOfMeasure" type="value">
    </element>
    <element name="Client" type="value">
    </element>
    <element name="SamplingFrequency" type="value">
    </element>
    <element name="Remarks" type="value">
    </element>
    <element name="SubGroupSize" type="value" convert="int">
    </element>
    <element name="Specification" type="value">
    </element>
    <element name="Nominal" type="value" convert="float">
    </element>
    <element name="Usl" type="value" convert="float">
    </element>
    <element name="Ual" type="value" convert="float">
    </element>
    <element name="Lal" type="value" convert="float">
    </element>
    <element name="Lsl" type="value" convert="float">
    </element>
    <element name="Zal" type="value" convert="float">
    </element>
    <element name="RangeVal" type="value" convert="float">
    </element>
    <element name="RangeAlarmVal" type="value" convert="float">
    </element>
    </xml-java-binding-schema>
    When i ran the xjc , it generated 3 .java files
    AddCtq.java , Ctq.java and VariableData.java
    But i am unable to compile any of the above files...
    The Error i am getting is
    VariableData.java:710: Undefined variable or class name: AddCtq
    return AddCtq.newDispatcher();
    ^
    1 error
    If i try to compile AddCtq.java , the Error i am getting is
    AddCtq.java:4: Class com.geindustrial.sqms.Ctq not found in import.
    import com.geindustrial.sqms.Ctq;
    ^
    AddCtq.java:169: Class com.geindustrial.sqms.Ctq not found.
    if (!(ob instanceof Ctq)) {
    ^
    AddCtq.java:170: Class com.geindustrial.sqms.Ctq not found.
    throw new InvalidContentObjectException(ob, (Ctq.class));
    ^
    3 errors
    And when i try to compile Ctq.java , i am getting the following Error:
    Ctq.java:4: Class com.geindustrial.sqms.VariableData not found in import.
    import com.geindustrial.sqms.VariableData;
    ^
    1 error
    How to solve this problem..Pls advise...
    Thanks
    Sateesh

    I suspect you are trying to compile the files one by one. You may also be trying to compile them disregarding the package structure.
    From your post, I gather these files are in the package: com.geindustrial.sqms
    Therefore, if they are not so already, put them under a directory structure:
    com/geindustrial/sqms
    and then compile with:
    javac com/geindustrial/sqms/AddCtq.java com/geindustrial/sqms/Ctq.java com/geindustrial/sqms/VariableData.java
    (The above is all on one line.)
    HTH,
    Manuel Amago.

  • "An unspecified error occurred while performing a conform action on the following file:"

    Has anyone else gotten this error in any of their projects?  I've searched around Adobe support pages and elsewhere on the internet, but have found nothing.
    It comes up in the events window and I can't even read what file it's talking about because it's on the next line, but the error message only shows one line and I haven't figured out a way to expand it.
    I'm not even sure if it's causing any problems, or not (the project seems to work ok).  This message shows up twice, as a red circle with an 'X' in it, but I also get the following message numerous times referring to a large amount of my .avi files:
    "File importer detected an inconsistency in the file structure of filename.avi.  Reading and writing this file's metadata (XMP) has been disabled."
    That message shows up as a yellow triangle with an '!' in it.  Since I haven't been able to turn anything up about these messages, I figured I'd ask here and see if anyone knew what was going on, how to fix the problem or if I should even worry about them.
    Thanks.

    I am having this problem now when i use dynamic link from Premiere to after effects. I copy the footage from premiere then paste into after effects, i add alittle text maybe some light rays etc save it then go back to premiere. Then i get this message "An unspecified error occurred while performing a conform action on the following file C:\Caches\Media Cache Files\text comp 1 48000.cfa." does anyone have any idea as to what this is? i have had a few problems using the dynamic link from premiere to after effects problems such as Premiere freezing, not playing the after effects comps back in real time, crashes etc. Its as if the 2 programs dont like the dynamic link.
    Im running Master Collection CS5 & CS 5.5 on running on a 24gb ram, Intel Core i7 950 @3.07GHz PC with a NVIDIA GeForce GTX470 graphics card.

  • I want to use Get Panel Image in Labview 5.0.1 and need details on how to save the BMP data generated

    I am trying to generate an application that saves a copy of its front panel on completion. This is easy to do using an invoke node with Print VI to HTML but this does not work in an .exe format. I have seen elsewhere that you have to use the Get Panel Image method, but no details are supplied in LV 5.0.1 documentation of how to use the "image" data (1-D Unsigned Byte array) that is generated. I want to save this in a format that can then be read as a bitmap in any standard graphics package. Any assistance?

    Hi,
    If you'd upgrade to LV5.1 or 6 you could use the 'standard' vi's for this.
    You need a VI called "Write BMP File.vi". It's not shipped with LV5.0.1.
    This vi only uses 3 subVI's, so perhaps someone at NI can convert it and
    send it to you (sorry, I won't, it's copywrited).
    If you cannot get this VI anywhere, you'll need to figure out the BMP file
    format yourself. It's not too complicated, but still could take some days.
    Perhaps someone figured it out before LV5.1 was released.
    Regards,
    Wiebe.
    "RDK" wrote in message
    news:[email protected]..
    > I want to use Get Panel Image in Labview 5.0.1 and need details on how
    > to save the BMP data generated
    >
    > I am trying to generate an application that saves a copy
    of its front
    > panel on completion. This is easy to do using an invoke node with
    > Print VI to HTML but this does not work in an .exe format. I have seen
    > elsewhere that you have to use the Get Panel Image method, but no
    > details are supplied in LV 5.0.1 documentation of how to use the
    > "image" data (1-D Unsigned Byte array) that is generated. I want to
    > save this in a format that can then be read as a bitmap in any
    > standard graphics package. Any assistance?

  • How to create the SWF file which was included surrogate pairs.

    I would like to make sure how to create the SWF file which are included surrogate pairs.
    The error of outside the scope of unicode occurred when I compiled(mxmlc) the as file which was set surrogate pairs to 'Unicoderange'.
    Ex, I set the '  '(UTF-16 is '20B9F') to 'Unicoderange'.
    However, I cannot add the surrogate pairs.
    The error of outside the scope of Unicode occurred when I compiled the AS file.
    The reason of error was that the Unicode(UTF-16) of surrogate pairs is invalid.
    Then, I read the following pages.
    These pages are written that unicode-range supported surrogate pairs.
    http://livedocs.adobe.com/flex/3/html/help.html?content=fonts_07.html
    http://www.w3.org/TR/1998/REC-CSS2-19980512/fonts.html#descdef-unicode -range
    So please let me know how to create the SWF file which are included surrogate pairs.
    Environment
    - Flex3.5a
    - TTC: meiryo(ver6.02), msgothic(ver2.50), mspgothic(ver2.50)
    Thanks,
    Takeshi Ishihara.

    I've been able to create project jar files in Eclipse by selecting Export from the File menu, then choose Java - Jar file - and provide the required information, name, destination folder etc. But when I do this, I do not export other jars on the build path this way nor do I expect to do this. I am only concerned with creating a jar file of my own work. A jar file does not "contain" other jar files. If the jar file contains the main method, and requires other jars for it's execution, then you may wish to include a reference to required jars on the class path entry of the Manifest file of the jar file you create. I'm not sure how to create a Manifest file in eclipse though..

  • Hi  can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why do i need to do some settings for it ?

    Hi  can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why? do i need to do some pre defined  settings to run the cd's and dvd's ?

    A .exe file is a Windows executable. OS X does not run Windows programs. If you need to use .exe files then you will need to install Windows on your Mac:
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    Install the Apple Boot Camp software.  Purchase Windows XP w/Service Pak2, Vista, or Windows 7.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • Script Alert: "Sorry I could not process the following files" (Error Message using Image Processor)

    I'm a seasoned Photoshop/Bridge CS5 user who recently upgraded to CS6.  In Bridge I just ran my first Image Processor batch, trying to convert a set of RAW .NEF files to .PSD files with a basic editing action I created applied to them.  Photoshop CS6 opens the files from Bridge and applies the actions, but then I get the "Script alert" error message "Sorry I could not process the following files" and a list of all of the files in the batch I was trying to run the script on.  The files all remain open and are saved on my hard drive in a folder created by the Image Processor script, but do not close unless I manually close them.  I never had this problem in CS5 where the image processor would apply the desired actions to the batch of photos one at a time, then save and close.  Thoughts on how I can fix this bug?

    Hey Jeff--
    No specific action steps to make the image safe - no flattening, etc. Had problems narrowing down the specific action step causing the problem. So I ran the Image Processor script in the ExtendScript ToolKit and debugged in. (I'm using the version that shipped with CS4.)
    Turns out what was happening is that the app.activeDocument.close() command on line 1490 was never getting called, because the this.SaveFile() above it was throwing an exception. More debugging got me to the problem - SaveFile() tries to restore the history state after making a doc safe for saving as a JPEG. This causes an exception. So I commented out line 1571:
    // app.activeDocument.ativeHistoryState = historyState;
    The script runs just fine after this. I commented out the close to see what history states got added to the doc, but no new states are recorded, so commenting out the restore line should not cause any problems.
    Of course, my solution does not solve the problem and I may need to comment out all the saveFile() lines that does this. Not sure why some actions have this problem and others don't. The actions I am running have about 25 steps. Perhaps PS is not catching up quick enough. I added a $.sleep(2500) after the restore history but that didn't help.
    So, not sure where this gets us. I will check about posting an action set with just one of the actions that cause the problem. But I may also have our customer comment out that line of the Image Processor script.
    Hope this helps. May post more next week.

  • How to load and display the external flv video files in dynamicly and the how to control the flv fil

    How to load and display the external flv video files in dynamicly using AS 3.0
    and  How to control the flv file  add the play paus button and add seekbar.
    I have using to load the flv file following code
    var flvPlaceHolder1:MovieClip = new MovieClip();
    var vid1:Video = new Video(734, 408);
    flvPlaceHolder1.addChild(vid1);
    addChild(flvPlaceHolder1);
    flvPlaceHolder1.x = 1059;
    flvPlaceHolder1.y = 152;
    var nc1:NetConnection = new NetConnection();
    nc1.connect(null);
    var ns1:NetStream = new NetStream(nc1);
    vid1.attachNetStream(ns1);
    var listener1:Object = new Object();
    listener1.onMetaData = function(evt:Object):void {};
    ns1.client = listener1;
    ns1.play("GV-1600 TURNING.flv");
    ns1.addEventListener(NetStatusEvent.NET_STATUS, statusChanged1);
    function statusChanged1(ns1:NetStatusEvent):void
             trace(ns1.info.code);
            if (ns1.info.code == 'NetStream.Buffer.Empty')
                 trace('the video has ended');
                 removeChild(flvPlaceHolder1);
                 //trace('removeChild');
                gotoAndPlay(1786);
    then how to add the play,paus ,full screen button    and   seekbar,volumebar.

    I have to Create the flash presentation for our company product
    In this presentation the left  side the text animation are displayed then right side the our product video is displayed.
    In this presentation i need the following option :
    1, The first product video and animation is finished then the next product is played
    2, then the video displayed  (size width and height 400x300) , I click this video to increase the size(ex:1000x700)
    3, then the playing video i control  it play, stop, paus button and volume bar, seek bar.
    4, then this presentation is displayed on 42 inches LCD TV so this full presentation is run full screen.
    I have finished first two steps 1 and 2
    the following are the screen short and code:-
    code :-
    var count=0;
    var flvPlaceHolder2:MovieClip = new MovieClip();   
    var vid2:Video = new Video(734, 408);
    flvPlaceHolder2.addChild(vid2);
    addChild(flvPlaceHolder2);
    flvPlaceHolder2.x = 1059;
    flvPlaceHolder2.y = 152;
    var nc2:NetConnection = new NetConnection();
    nc2.connect(null);
    var ns2:NetStream = new NetStream(nc2);
    vid2.attachNetStream(ns2);
    var listener2:Object = new Object();
    listener2.onMetaData = function(evt:Object):void {};
    ns2.client = listener2;
    ns2.play("GS-4000.flv");
    this.addEventListener(Event.ENTER_FRAME, BtnFadeIn2);
    function BtnFadeIn2(event:Event):void
        if (this.currentFrame == 387)
            /*flvPlaceHolder2.x = 30;
            flvPlaceHolder2.y = 140;
            vid2.width=1800;
            vid2.height=800;
            trace('Screen size is changed');*/
            if(count==0)
            flvPlaceHolder2.x = 30;
            flvPlaceHolder2.y = 140;
            vid2.width=1800;
            vid2.height=800;
            count++;
    ns2.addEventListener(NetStatusEvent.NET_STATUS, statusChanged2);
    function statusChanged2(ns2:NetStatusEvent):void
        trace(ns2.info.code);
        if (ns2.info.code == 'NetStream.Buffer.Empty')
                trace('the video has ended');
                 removeChild(flvPlaceHolder2);
                 //trace('removeChild');
                gotoAndPlay(433);
    flvPlaceHolder2.buttonMode=true;
    flvPlaceHolder2.addEventListener(MouseEvent.CLICK,home2);
    function home2(e:MouseEvent):void
        if(vid2.width==734 && vid2.height==408)
            flvPlaceHolder2.x = 30;
            flvPlaceHolder2.y = 140;
            vid2.width=1800;
            vid2.height=800;
        else
            flvPlaceHolder2.x = 1059;
            flvPlaceHolder2.y = 152;
            vid2.width=734;
            vid2.height=408;

  • How to download the application file to local file by back ground job?

    hi:
      can any one tell me how to download the application file to local file by back ground job? thanks in advance..
    Monson

    Hi,
    In order to download a file from application layer to a local file in background,
    first write a report(ZREPORT1) in which do the following steps:
    OPEN DATASET g_file_1 FOR INPUT IN TEXT MODE ENCODING DEFAULT.
    loop the g_file and append all the data into another internal table.
    end of this report you shd have all the data in the application layer file into your internal table.
    Now create another report(ZREPORT2) and submit this report in background.
    that is,
    JOB_OPEN
    JOB_SUBMIT and
    JOB_CLOSE
    and in job_submit submit ZREPORT1 which downloads the file in application layer.
    Please reward points if helpful.
    Regards,
    Arul.

  • How to extract the cobol files into owb

    Hi
    How to extract the cobol files in owb,I am using OWB9.2.
    Ex:I am having 2 records DCEC4000100 9159000050C those values are 5 bytes 'RAVI and 6 bytes '15000'.
    Using contorl file i am trying to load these into Oracle,But i am not able into insert these records into Oracle.
    Can any tell me how to handle this kind of situation?
    Regards,
    Rupak

    Good morning Ashok,
    Your data is in a SQL*Loader supported datatype, so basically it should not be a problem.
    Have you checked the Database Utilities guide (for Oracle9i for instance: http://www.lc.leidenuniv.nl/awcourse/oracle/server.920/a96652/toc.htm) on how to handle this?
    I'll also repeat my previous question, have you ever been able to load data into the database using SQL*Loader (either using ASCII values or any other datatype)?
    For the OWB part, have you read "Importing Data Definitions" (typically chapter 4)? More specifically, "Specifying Field Properties" in "About Flat File Sources and Targets"?
    In "SQL*Loader Properties" it says the following:
    Type Describes the data type of the field for the SQL*Loader. You can use the Flat
    File Sample Wizard to import the following data types: CHAR, DATE, DECIMAL
    EXTERNAL, FLOAT EXTERNAL, INTEGER EXTERNAL, ZONED , AND ZONED
    EXTERNAL. For complete information on SQL*Loader field and data types, refer to
    Oracle9i Utilities. Currently, only portable datatypes are supported.
    If you check the database utitlities guide (chapter 6 Field List Reference) and look for "SQL*Loader Datatypes", you'll find (packed) decimal under the Nonportable Datatypes. This implies that OWB does not support it.
    This does not mean you can't use SQL*Loader, you'll only have to define everything separate from OWB and call it separately as well.
    Good luck, Patrick

  • How to attach the PDF file in spool to an email?

    Dear friends,
        I need to attach the PDF file generated in the spool (SP01) to email.
    The PDF file is generated from VL02N at the time of Post Goods Issue .
    Thanks,
    Vidya.

    Hi,
    Refer to the link it is explained how to configure the output type to send the email with PDF attachment on saving the Billing Document.. you need to do the same way..
    Email Billing document as PDF Attachment while saving from VF01/02

Maybe you are looking for