How to analyze errors in GP?
Hi All,
I am working on getting a GP running. Unfortunately, I get the following error when executing the GP:
"Cannot complete action: Activity could not be read"
What is an 'Activity' and where can I view more information about the error? There must be means that provide more info than that!
I have no clue where this error is caused and I am not able to find more info!
Please help! Points will be rewarded!
Thanks, Johannes
Hi Johannes,
The GP Monitor plug-in enables you to fully monitor all applications, processes, activities, transport requests in GP.
Here is a link to useful documentation for this tool:
http://help.sap.com/saphelp_nw70/helpdata/en/bd/996642c4764454e10000000a1550b0/content.htm
Hope this clears up the problem
Greets,
Petra
PS. Check esp. the Monitor Process Instances section
Similar Messages
-
can anyone give me insight into the following output of iostat?
iostat -exn
extended device statistics ---- errors ---
r/s w/s kr/s kw/s wait actv wsvc_t asvc_t %w %b s/w h/w trn tot device
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 0 0 0 0 lofi1
0.0 1.4 1.2 5.2 0.0 0.0 0.2 32.1 0 1 0 0 0 0 c1t0d0
4.5 8.8 380.9 54.0 1.9 3.7 141.5 277.1 1 3 2693 30667 27 33387 c1t1d0
is it disk or controller and how can we check it?Hello,
There is a specific document which will help analyze iostat counters:
How to Interpret Error Counters for the Solaris iostat -E output (Doc ID 1007250.1)
As Pascal said, this is not definitive for the controller, but rather for the disks.
Regards,
Radu -
After some performace testing I have an error in rwb (sender )
Transmitting the message to endpoint http://xi:8000/sap/xi/engine?type=entry using connection AFW failed, due to: Received HTTP response code 500 : Internal Server Error.
smq1/smq2 doesn't show messages
runtime cache is updated
Message status is waiting
How to analyze what's happen with Integration Engine?Denis
A HTTP Response in the Adapter Framework can be caused by the following:
The J2EE server might be overburdened and cannot accept the call. The 'Receive'servlet is not called. You will find further details on the HTTP status code definitions under "http://www.w3.org". Check the accessibility of the server by calling: http://<hostname>:<port>/MessagingSystem/receive/AFW/XI.
The Listener Beans of the affected connection (AFW, Marketplace, BC,see above) were not registered or the log-specific Event Handler was not found.
To debug this go to SAP Notes: <b>803145</b>
---Mohan -
How to view errors if bulk collect has thrown errors
Hi,
I have few questions.
1.How to view error whether bulk collect is successful or not
2.What is identified & unidentified relationships in ERWIN
3.How to see the errors whether the sql loder is successful or not
and how to open the log file.Is there any specific command in UNIX
which tells loader is successful or thrown error
4.When executing the pl/sql procedure from UNIX.how to check for errors.
Please provide the answers for this
ThanksUse SAVE EXCEPTIONS clause in your FORALL loop.
Is this for homework/test? -
Dear Experts,
I have a requirement for making material description as non mandetory in change request view of mdg material screen.
I have done that using field usage in get data method of feeder classes, but still message is displaying.
This message 'Material description is mandatory is displaying with check action only, but not with save or submit after i anhance field property as not mandetory.
How to prevent error message for material description in MDG material detail screen, when user click on check action.
Thanks
SukumarHello Sukumar
In IMG activity "Configure Properties of Change Request Step", you can completely deactivate the reuse area checks (but will then loose all other checks of the backend business logic as well).
You can also set the error severity of the checks from Error to Warning (per CR type, not per check).
Or you provide a default value for the material description, e.g. by implementing the BAdI USMD_RULE_SERVICE.
Regards, Ingo Bruß -
How to print error messages in browser?
When I visit a jsp file in browser, there's some errors in the jsp file, so the browser returns
The page cannot be displayed
There is a problem with the page you are trying to reach and it cannot be displayed.
I want the detail error messages, so I can debug my problem. How to print error message in browser or find the message in some log file?Hi Kanaraja,
Thanks for your answer. I need to get certain information from the list. So, I use LIST_To_ASCII FM. However, may I know the ascii_tab should be type to what? And after this FM, do I have to use another FM to display the ascii list?
data ABAPLIST type ABAPLIST OCCURS 0.
SUBMIT RPCALCU0 VIA SELECTION-SCREEN
with PNPXABKR = 'US'
with PNPTIMRA = 'X'
with PNPPABRP = '10'
with PNPPABRJ = '2003'
with PNPPERNR-LOW = '100750'
with PNPPERNR-LOW = '109202'
with PNPPERNR-LOW = '100255'
with PNPABKRS-LOW = 'US'
with SCHEMA = 'ZUSP'
with RADI_EDT ='X'
with EDT_VARI = 'CUS&SAP_US'
with TST_ON = 'X'
EXPORTING LIST TO MEMORY and RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = ABAPLIST
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
list_index = -1
TABLES
listasci = asci_tab
listobject = ABAPLIST
EXCEPTIONS
empty_list = 1
list_index_invalid = 2
OTHERS = 3.
IF sy-subrc NE '0'.
WRITE:/ 'LIST_TO_ASCI error !! ', sy-subrc.
ENDIF. -
How to give error message for the screen element text field when wrong i/p
How to give error message for the screen element text field when wrong i/p
when wrong input given
eg.
I have a text box with SBOOK-CARRID
so when user give wrong entry in text box i.e LG
then I should give some error stating that the the input is invalid or not available ,
now it showing the error of standard messages,
i want manual message to be displayed when error comes.
Thank you,
Regards,
Jagrut Bharatkumar ShuklaHi all,
Thank you for your valuable reply,
but the thing is that its a screen field,
i.e text box not a selection screen
i created in screen layout
with name sbook-carrid
now i want to get error message display if wrong i/p is given
thank you.
Regards,
Jagrut bharatkumar Shukla, -
How to make error message as warning message
how to make error message as warning message? ie i get error message hence cannot save the slaes order i want to make that error message as warning so that i can save the sales order please help.
Hi
If a message is a custom message, then by changing the message type from E(Error) to W (warning) we can convert the message type into error message. This is done with the help of development guy. A change in the code is needed.
If it is a standard message, then it depends on whether we have teh access to change the message type. If access is there, then it is possible to change the message from Warning to Error. i.e. If we are capturing std SAP message in our code and displaying then we can change it, else if SAP message is displayed directly, we cant change it.
So, to change it, capture the error message from SAP in some Zcode and then convert that message into a custom message of message type E.
The whole change needs ABAP support.
Try with tcode <b>OVA2</b> settings selecting for sales order or in SAPRO--SD-BF-Log of Incompletion Items
Message was edited by:
SHESAGIRI.G -
How to write error log while creating invoice and avoid implicite commit
Hi,
I've have written code in exit RV60AFZZ in which I check for some possible errors while invoicing via VF01/VF04. If conditions are met then we create error message and display it to the user. As result we had a lot of missing SD invoices in FI when we did batch/mass invoicing. I've opened OSS note and SAP support team wrote that using statement MESSAGE is forbidden in UE. It can lead to implicite commits.
Do you have some example how to write error log for invoincing in VF01/VF04 transactions?
Thanks@ sri nath. Please read post before answering. I wouldn't be posting trivial questions. As I wrote before it doesn't work. Also SAP support would not answer to the question in my OSS.
In VOFM, SAP is using routine VBFS_HINZUFUEGEN_ALLG to write to error log.
Mine is something like this in ue:
PERFORM ZVBFS_HINZUFUEGEN_ALLG
USING VBAP-VBELN VBAP-POSNR 'ZSD' 'E '600'
SPACE SPACE SPACE SPACE.
(we have custom message class)
As result XVBFS and VBSK are filled with error, but posting is also done. Error log is filled but invoice is created and posted in FI.
That is not OK.
thanks -
While creating a device category i'm getting an error "enter a valid division via eg01,how can the error be overcome?
Neha,
you can do in two ways.
1. Enter a valid Division which you configured in the system.
2. Remove the Division as required field. However I suggest it should have a valid division. Why can not you check with your Functional owner?
Linganna Katigiri -
How to display error message in abap
How to dispaly error message in report?
i have to check the range bewteen two days and if it is not in range have to display error message only once.
next time if i press the execute button report will get executed without showing the warning message.
i am calculating the days between two dates, i am displaying the error message but if i press the execute button i will not allow me to execute the report.it again shows me the error message.i have to skip this in 2nd time.
can any one suggest what to do with this?hello suman,
i am using select-option in my report. And i have to check the difference between two dates in select option input box( low-value and high-value). if it is greater then suppose 10 then i have to display warning message at once and then if click on execute button , the report should get executed without showing any warning messages in report.
here i am attaching my source code.please take a close look and tell me where should i have to make change.
SELECT-OPTIONS :s_bedat FOR ekko-bedat.
AT SELECTION-SCREEN ON s_bedat.
IF NOT s_bedat IS INITIAL.
PERFORM bedat_validate. " Perform for Purchasing Document Date Validation
ENDIF.
FORM bedat_validate . " Form for Purchasing Document Date Validation
DATA : diffr TYPE i.
CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
EXPORTING
i_datum_bis = s_bedat-high
i_datum_von = s_bedat-low
I_KZ_EXCL_VON = '0'
I_KZ_INCL_BIS = '0'
I_KZ_ULT_BIS = ' '
I_KZ_ULT_VON = ' '
I_STGMETH = '0'
I_SZBMETH = '1'
IMPORTING
e_tage = diffr
EXCEPTIONS
DAYS_METHOD_NOT_DEFINED = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
IF diffr GT 31.
MESSAGE s009(zerrormsg) WITH text-000 DISPLAY LIKE 'W'.
LEAVE TO LIST-PROCESSING.
ENDIF.
ENDIF.
ENDFORM. " BEDAT_VALIDATE -
How to display error message in Shopping Cart?
How to display error message in Shopping Cart and stop the shopping cart for further processing? I try MESSAGE w001(zshop) or MESSAGE e001(zshop). But it is causing run-time error.
Hi Paul,
In the DOC_CHECK or DOC_SAVE BADI, you have a global internal table named et_messages. The structure of this table is 'bbp_smessages_badi'. You can append your error message here by inputting the message type, ID and number. The message type is either 'E' for error or 'W' for warning and the number would depend on your message class(ID). You will be able to see the error message on top of the screen, can be a red or yellow highlight depending on your appended message. I don't think creating the error message via the MESSAGE syntax will be successful, maybe this is why you are getting a runtime error.
Regards,
Noel -
Does anyone Know how to fix error 0xe8000065 when connecting the ipod touch 4g
does anyone Know how to fix error 0xe8000065 when connecting the ipod touch 4g
See:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting -
How to analyze statspack report
Is there any book I can read to understand how to deal with the sp report ?
I know how to read part of it ,
what I need is something that guide what I can do when I see that wait event X is too high.
for exmaple , if dc_constraints is too high , what do I have to change ?
not only that , I have to analyze the rest of the report , I see how can we improve performance .
Thanks .Hi,
how to analyze the reportWell, I have my notes here:
http://www.dba-oracle.com/t_reading_statspack_report.htm
Also, you can paste-in a STATSPACK report into http://www.statspackanalyzer.com and learn how to analyse a STATSPACK report.
There are several Oracle Press books on STATSPACK, you may find useful:
http://www.amazon.com/Oracle9i-High-Performance-Tuning-STATSPACK-Burleson/dp/007222360X
Hope this helps. . .
Donald K. Burleson
Oracle Press author
Author of "Oracle Tuning: The Definitive Reference":
http://www.dba-oracle.com/bp/s_oracle_tuning_book.htm -
How to handle errors in a file at sender side?
Hi
I have done a file to proxy scenario.
I know how to handle errors on proxy.
But on sender side when picking the file if one the record have worng fomat its throwing mapping error and its not processing any record..
I wanted to process the records which have right format and data and all remaining recrods which have wromg format should be send back to the sender as file.
How to do this.
How to handle error in sender file.
Regards
SowmyaHello Sowmya,
In your scenario Three ways you can validate the data.
1) Before the data reaches into SAP system ie in XI system during Mapping or before mapping i,e in Adapter Module in the Sender side
2) this option, is in the receiver applications side. ie. Validations will be taken care in the SAP system i.e in ABAP server proxy code.
3)Through BPM, If Mapping Exception Occures then through exception Branch you can send bad formate file to sender again.
Generally, it is prefer to more business critical validations in the Application System ie Receiver Application System (ABAP Server Proxy)
In this, you can have more flexibility of the validations as you are validating some of the SAP payroll informations as Personal ID etc.
Based on the complexity and flexibility of the requirement, you can either do this in the XI (if XI, ie Sender Adapter Module or Mapping) or in the ABAP proxy
Thanks'
Sunil Singh
Maybe you are looking for
-
I'm getting absurd load times of 4 - 10 hours on this streaming device on a movie rental. My Internet connection is excellent 10mbps. What gives?
-
Hand made or generated GUI code, what do proffesional use?
Hello! I am currious about what programs people that work as a programmer use? Is it common that they use programs that generats code like Netbeens for instance? I tryed that program in design mode to make a gui, but when I looked at the code it had
-
Flash Player not loading on Vista 64
I'm running Vista 64. I have uninstalled and reinstalled Flash Player 11 4-5-6 times and every time I go into google maps to street level it tells me I need to update Flash Player. What's going on?
-
Make my powerbook run like new
Lately my powerbook has had a lot of errors and is running slow. I was wondering how I make my ibook new again -? what do i do to like, re-make it ? thanks
-
I have 2 questions on hot backup concept please: Let's say I started hot backup at 9 AM and finished at 11 AM. 1) I can recover database to the point of 9 AM and on (recover until time) as long as I have all archive logs generated between 9 and 11 AM