How to assign local variable to global variable dynamically in adobe livecycle designer 7.1

Hi All,
i want to assign my textfield value to global variable dynamically.so that where ever i want , i will access my global variable.so it is possible in adobe livecycle designer 7.1. kindly suggest me method.Thanks in advance.
Thanks & Regards
Ganesh

Please remove all adobe livecycle designer versions from your local pc.
restart your pc to be sure, that all temp data is deleted.
download the newest ald version from service.sap.com and install it.
have fun with developing adobe forms with sap transaction sfp.

Similar Messages

How to add warning message while using 'print' function in Adobe LiveCycle Designer

I am trying to make pdf document for my company which requires adding a warning message while anyone use 'print' function from the page...
Does anyone know how to add warning message on LiveCycle Designer
Also my supervisor mentioned something using 'nag' if that rings any bell

No you shoudl never go into the XML source unless uinstricted to do so.
You can open the script editor (under the window menu). It will appear above the drawing area but below the toolbars. You can resize it if there is not enough room. When you click on an object in the form you can choose an event to script against in the Show dropdown. In your case you will want to choose the prePrint event. A line will show up that indicates the object that is associated with the script as well as the event and other information. Add your script below this line. Once that is done you are finished and your form is ready for testing.
Paul

How to Set and Use a global variable within a session?

Dear All,
I'm new to jsp, and would like to ask how to set and use a global variable within a session?
Thanks in advance.
Regards,
Cecil

With session.setAttribute("name",object) you can store a Attribute in the session object.
with session.getAttribute("name") you can get it.
That's it.
Regards,
Geri

What is the difference between Instance variable and Global variable?

Hi folks,
Could you please explain me, "what is the difference between Instance variable and Global variable?"
Are they really same or not?
--Subbu

Hi flounder,
I too know that there is no such a term GLOBAL in java.
generally people use to say a variable which is accessible throught out the class or file has global access
and that will be called as a global variable...
my point is very much similar to what Looce said.
In simple that is not a technical term, but just a causual term.
In technically my question is, "What is the difference between a instance variable and public variable?".
Hi looce,
Thanks for the reply. even thats what my understanding too....in order to confirm that i raised this question..
Your reply has given a clear answer...... thanks again.
--Subbu

How to install fonts in Adobe Livecycle Designer

Hi All,
 I want to install new fonts in adobe LiveCycle designer.
 I installed this fonts in Control Panel >Fonts>File -->Install New Fonts and it is possible to see them in Livecycle Designer but when i preview the adobe print form this not work.
I found in the installation of the ADS configuration Guide this informations.
Adobe document services require access to fonts that are installed with the Font Manager Module. This module contains a number of Adobe bundled fonts installed in /usr/sap//j2ee/os_libs/adssap/FontManagerService/fonts/adobe.
You can also add fonts obtained from other vendors. The types of fonts you can add are OpenType® (.otf), TrueType® (.ttf), and PostScript® Type 1 (.pfb/.pfm).
So the question is how can i install new fonts so as to use in Adobe Forms?
I will appreciate any help and documentations about.
Thank you,
 Ari

Adobe document services require access to fonts that are installed with the Font Manager Module. This module contains a number of Adobe bundled fonts installed in /usr/sap/<SID>/J<xx>/j2ee/os_libs/adssap/FontManagerService/fonts/adobe.
Create a subdirectory called fonts below the
/usr/sap/<SID>/SYS/global/AdobeDocumentServices/FontManagerServicedirectory
Create a subdirectory called customer below the fonts directory created in the previous step
Copy your font file(s) into the customer directory
Restart the "Document Services Font Manager" for the changes to take effect.Use Visual Admin on the Adobe Document server
i. Expand "Server à Services "
ii. Restart the Document Services Font Manager
Also restart the application com.adobe/AdobeDocumentServices
Expand "Server à Services à Deploy"
Select the "Applications" button at the bottom of the screen
Stop and start the com.adobe/AdobeDocumentServices application

How to make Adobe LiveCycle Designer ES 8.2 file compatiable with Adobe Reader X

Adobe Reader X sporadically is unable to save or print a file created in Adobe LiveCycle Designer ES 8.2. Does anyone have any suggestions on how to make it compatiable/stable with reader X? We want to deploy reader X with Win7 32 bit

I am not aware of any issues in that area ...can you provide more information as to when it is happening?
Paul

How to avoid wordbreak of japanese characters in adobe livecycle designer?

I am using adobe livecycle designer to design the forms.while giving the japanese characters in the text field the word break occurs and goes to next line since it is multi byte character. I have to avoid it and display the whole word in the single line.This is not happening in English characters but in Japanese.How can i achieve it in live cycle designer.anyone please help me out. thanks in advance..

Could you please try with japanese language designer? May be that will resolve your issue.

How to activate script debugging in Adobe Livecycle designer

Friends,
I would like to know how to activate script debugging in the Adobe Livecycle designer. I need to debug the scripts written in the script editor.
Thanks and Regards.

Syntax checking is available in designer from version 8.1 onwards.
If you want to enable in Adobe Reader then go to Edit --> Preferences --> JavaScript --> Enable the option Show console on Errors on messages.
Apart from it the alternative way to debug the scripts is to use xfa.host.messageBox and check the values.
Chintan

How to populate Adobe LiveCycle Designer generated PDF Forms with data from Database in Windows app

Hi
I have a PDF template designed in Adobe LiveCycle Designer. This template has form fields which needs to be filled with data programmatically. I am using windows application in C#.Net 2005 in which I want to retrieve data from database and merge this data into PDF form in respective fields.
How this can be achieved?
I searched a lot & I found that we can process the XDP file generated from PDF to acheive this. I created the XDP file out of the PDF template created in designer. But I don't know how to merge data from database into that XDP file in respective fields and again convert this XDP file back to PDF programmatically. Can anybody help me ? This is urgent.
Thanks in advance.
Sambhaji

Please ignore the above code. The following one is correct one. using System; using System.Data; using System.Configuration; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Web.UI.HtmlControls; using System.Text; public partial class _Default : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { Response.ContentType = "application/vnd.adobe.xdp+xml"; StringBuilder responseString = new StringBuilder(); responseString.Append("<?xml version='1.0' encoding='UTF-8'?>"); responseString.Append("<?xfa generator='AdobeLiveCycleDesigner_V8.0' APIVersion='2.5.6290.0'?>"); responseString.Append("<xdp:xdp xmlns:xdp='http://ns.adobe.com/xdp/'>"); responseString.Append("<xfa:datasets xmlns:xfa='http://www.xfa.org/schema/xfa-data/1.0/'>"); responseString.Append("<xfa:data>"); responseString.Append("<form1>"); responseString.Append("<TextField1>Homer</TextField1>"); responseString.Append("<TextField2>Simpson</TextField2>"); responseString.Append("<field name ='DropDownList1'>"); responseString.Append("<items save='1'>"); responseString.Append("<text>1</text>"); responseString.Append("<text>2</text>"); responseString.Append("<text>3</text>"); responseString.Append("</items>"); responseString.Append("</field>"); responseString.Append("</form1>"); responseString.Append("</xfa:data>"); responseString.Append("</xfa:datasets>"); responseString.Append("<pdf href='C:\\Test.pdf' xmlns='http://ns.adobe.com/xdp/pdf/' />"); responseString.Append("</xdp:xdp>"); Response.Write(responseString); Response.Flush(); Response.End(); } }

How to split a column in adobe livecycle design?

How does one split a column in adobe livecycle design. I have found that one can split a column after you have merged it. But I want to split two columns into four in the middle of a table. This can be done in Word. Is there a way even if one has to split each row? Does any one know? Like in the table below I would like to make Header 2 & Header 3, Rows 2 and 3 into 2 rows 4 columns.
Header 1
Header 2
Header 3
Header 4
Thanks
Sheila

If you want to have 1 column to be split in 4 columns, you can insert a table with 4 columns inside a column cell.. If you mean to add rows and you want to keep those 4 columns, you should add instances of the row where you inserted the table with 4 columns...
Hope this helps!
Mag

How to configure Adobe LiveCycle designer on my SAP Server?

Dear friends.
I have installed SAP ECC 6.0 and Adobe LiveCycle designer ES 8.2 on my computer.
Now I want to use Adobe LiveCycle designer in SAP by TCODE:SFP.
Please tell me how to configure Adobe LiveCycle designer on my SAP Server in details.

Hi MSReddy,
You don't need to configure it on SAP server. It should be installed on you desktop only.
Install ADLC on your desktop and open SFP it should work. If its not showing you the layout it means you are using wrong version of ADLC. Use ADLC downloaded from SAP Service market place only.(service.sap.com), else it will create problems.
Regards,
Vaibhav

How to download Adobe LiveCycle Designer new version.

Hi,
I'm new to this forum and new to Adobe interactive forms.
I went through the SAP Service market by refering to the sapnote 962763 where they mention the path as shown below
Installation Source
You can download the Adobe LiveCycle Designer installer from SAP Service
Marketplace:
http://service.sap.com/installations
Entry by Application Group
-> SAP NetWeaver
-> SAP NETWEAVER
-> SAP NETWEAVER 04
-> installation and Upgrade
-> <Choose any OS and DB combination.>
-> 50088654_1 NW 7.0 Presentation - Adobe LiveCycle Designer 7.1
But I didn't got the following paths.
So, Please guide on how to download the Adobe LiveCycle Designer new version

There are multiple ways to get to the latest version of Adobe LiveCycle Designer 8.2. The note you referenced should be made obsolete.
This is the path I choose from the download center but there are different installations you could pick.
Installations and Upgrade
 - A - Z Index -> N
 -> SAP Netweaver
 -> SAP EHP2 for SAP Netweaver 7.0
 -> Installation
 -> AIX
 -> Oracle
 ... page down to object 51039107 - Adobe LiveCycle Designer 8.2. It is toward the bottom.

How do I see values of global variables in a SAP system

Hi Guys
How do I get to see the values of global variables DIR_GLOBAL etc.
Actually I wanted to run an archive for some IDOCs, and I configured a filepath for the same and gave it an address to my local system, now when I use SARA and after customising the logical path it gives me an error stating that "Logical file path is not completely maintained".
So I resorted to one of the predefined paths ARCHIVE_DATA_FILE and it archived successfully but I am not able to figure out the exact path of the archived file can you please help??
Best regards
Sujoy

Hello Sujoy,
Execute transaction FILE, double click on Logical File Name Definition, then, scroll down to find ARCHIVE_DATA_FILE - double click on ARCHIVE_DATA_FILE. Note what is entered in the Logical path field and then, go to Logical File Path Definition. Look for the path name from previous step and highlight/select it and click on Assignment of Physical Paths to Logical Path. From there, you can double click on the relevant Syntax group. This will give you the path for where the archive file has been written to.
I hope this explanation is not too confusing :-).
Best Regards,
Karin Tillotson

Timeline. How does (or does not) update global variables?

Hello All,
I am having problems to understand how a timeline updates values. In my case the timeline is supposed to change an index within a second always by incrementing it by one or decrementing by one. Basically I am trying to create a mosaic of images that when I press left key all the columns move to left and when I press right key all the columns move to right.
To do this I have a deltaX constant that defines the translation.
Then I have a global tracker initialized to 0 and then udated +1 if move to right, -1 if move to left.
The Timeline is:
public var tracker: Number = 0;
var thumbnails: ImageView[] = bind for (column in [0..appModel.CATALOG_COLUMNS + 1]) {
                for (row in [1..appModel.CATALOG_ROWS]) {
                    def imageView: ImageView = ImageView {
                                image: bind catalogData.dataAt(row, column)
                                x: bind (column - 1)*catalogData.maxThumbnailWidth + column*xSpacing
                                y: bind ySpacing + (row - 1) * (catalogData.maxThumbnailHeight + ySpacing)
                                translateX: bind tracker*deltaX
                                transforms: bind [
                                    Rotate {
                                        angle: bind direction * rotation
                                        pivotX: bind imageView.x + imageView.boundsInLocal.width / 2
                                        pivotY: bind imageView.y + imageView.boundsInLocal.height / 2
    override public function create(): Node {
        return Group {
                    content: bind thumbnails
public function rotateAndTranslateToRight(): Void {
        direction = 1;
        translateAndRotateTimeline.stop();
        translateAndRotateTimeline.play();
    public function rotateAndTranslateToLeft(): Void {
        direction = -1;
        translateAndRotateTimeline.stop();
        translateAndRotateTimeline.play();
    var translateAndRotateTimeline = Timeline {
        def initialValueTracker = tracker;
                keyFrames: [
                    KeyFrame {
                        time: 0s
                        values: [
                             rotation => 0,
                             tracker => initialValueTracker
                    KeyFrame {
                        time: 1s
                        values: [
                            rotation => 360 tween Interpolator.LINEAR,
                            tracker => initialValueTracker + direction tween Interpolator.LINEAR
            }The problem is that if I first move to right the Timeline works correctly and tracker goes from 0 to 1 in one second, therefore I see a translation to right of tracker*deltaX pixels. So far so good.
Then if I move to left, I am expecting the Timeline to change tracker from 1 to 0 in one second, but really it is changing tracker from 0 to -1... which of course messes up my translation to left.
I thought Timeline updates global variables (define outside the Timeline in the context of the class the Timeline is defined) during the transition, but apparently from my observation it doesn't.
Or maybe I am not defining correctly the Timeline itself and/or the tracker variables?
Thanks.
Edited by: sacchett88 on Jun 4, 2010 1:03 PM

Thanks for the reply... but it didn't help me that much in finding the workaround. I wrote a simpler example to prove the point that can be easily copied and pasted and run. The example draw a circle and for every right key it should move the circle to right of a deltaX number of pixel. If left key is pressed then the circle should move to left of a deltaX number of pixels. The code is:
import javafx.stage.Stage;
import javafx.scene.Scene;
import javafx.scene.shape.Circle;
import javafx.scene.paint.Color;
import javafx.scene.input.KeyEvent;
import javafx.scene.input.KeyCode;
import javafx.animation.Timeline;
import javafx.animation.KeyFrame;
import javafx.animation.Interpolator;
var deltaX: Number = 70;
var direction: Number = 1;
var tracker: Number = 0;
var circle: Circle;
var translate = Timeline {
    def initialValueTracker = tracker;
            keyFrames: [
                KeyFrame {
                    time: 0s
                    values: [
                        tracker => initialValueTracker
                KeyFrame {
                    time: 1s
                    values: [
                        tracker => initialValueTracker + direction tween Interpolator.LINEAR
Stage {
    title: "Application title"
    scene: Scene {
        width: 900
        height:500
        content: [
            circle = Circle {
                centerX: 100,
                centerY: 100,
                translateX: bind tracker*deltaX
                radius: 40
                fill: Color.BLACK
                onKeyPressed: function (e: KeyEvent): Void {
                    if (e.code == KeyCode.VK_RIGHT) {
                        direction = 1;
                        translate.stop();
                        translate.play();
                    } else if (e.code == KeyCode.VK_LEFT) {
                        direction = -1;
                        translate.stop();
                        translate.play();
circle.requestFocus();I understand how KeyFrame works. However the final value I'd like to be the initial value for next key press. I also tried to assign explicitely the final value to the tracker variable at the end of the timeline, but next time timeline still picks up the initial value 0 of tracker.
Thanks.

How do you reference a created global variable in a report text field?

I have created a parameter using the Globaldim statement in a script file. when I reference this parameter in any other script file during the current DIAdem session the value is passed without any issue. Call the variable parmxyz where I assign it a value of 25.3
The help section under Globaldim mentions that global variables can be referenced in all panels, scripts, and dialogue boxes. When I try to insert a text box on a report page using the @@parmxyz@@ it returns NOVALUE where I expect to see 25.3 (for example).
When I substitute @@CurrDate@@ I do get the date, so I know the text box is valid. What am I doing wrong?
Steve M

Hello Steve!
It should work the way you did it. But their are some circumstances wich might prevent it:
You have reseted the global script engine. All variables will be lost.
You have a Sub with the same name in a command extension script. There is no warning ;-)
One Test you can make is to put in '@@TypeName(paramxy)@@' as the expression to see the variable type. You can also try a realy unique variable name. The last option is to use ItemInfoGet to get detailed infos about your variable.
Matthias
Matthias Alleweldt
Project Engineer / Projektingenieur
Twigeater?

How to assign local variable to global variable dynamically in adobe livecycle designer 7.1

Similar Messages

Maybe you are looking for