How to assign TAB Sequence ?
Hey..
Can anybody tell me how to assign tab sequence...? I mean if I have some buttons & controls on the front panel try to visualize front panel of login ; whenever I press TAB from keyboard i want the selection of the buttons & controls should be in sequence... Can anyone tell me how to do this...?
Solved!
Go to Solution.
See Edit\Tabbing Order and, right-click on control Advanced\Key Navigation
Cheers!
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)
Similar Messages
-
How to assign Tab Set manually
Hi,
I created form on table with report. My report page does not show tab set , Can someone advice how to assign Tab Set manually to a page .
I tried editing report page and adding tabs from shared component section but looks likes that is not the right place because it allows to add item to tab set and not tab set to page .
Thanks in advance
AalishanHi Aalishan,
On your page, click on the "Edit Page Attributes" icon in the top-right of the Page section. On there, check what the setting for "Standard Tab Set" is - it should be pointing to the tab set you want to use.
You can also check, through Shared Components, Tabs, that the tab itself shows the page number for your report page in the "Tab page" setting
Andy -
Hello All.
How to provide the tab sequence in WDA applications.
I want to provide the option of moving to various fields by the click of the tab button in my application.
Rite now its going in a random way.
How to achieve this.
Regards,
SampathKumar GDear Sampath,
I have never tried this,but from the posts of others i have understood that, first time you can set the focus on first ui element by coding.
lo_view_contr->request_focus( EXPORTING context_element = lo_element
attribute = 'MATNR' ).
You can write this piece of code in WDDOMODIFYVIEW.
Next your requirement is when you press tab it should go to other field, for this the fields should be in sequence (input1,input2,savebutton).
try to put all the 3 fields in a transparent container and then
try 1 ) input1 -matrix data
input2- matrix data
input3 -matrix data
or try 2)
input1 -matrix head data
input2- matrix data
input3 -matrix data
or try 3)
input1 -matrix head data
input2- matrix head data
input3 -matrix head data
among all the above 3 one may work....let me know which one worked for you.
Regards
Sajid -
User Create/Manage Form - how to set tab sequence
hi all,
I'm trying to set the tab seq of the oim user create/manage form such that after 'Last Name' it goes to the UDF 'Date of Birth'. So far I have tried setting the order and as well as the setting it in the formmetadata.xml with not luck.
any suggestions would be most welcome.
kind regards,Hi Mahesh,
Use this below code to set the Tab Order.
Private Sub SetTabVertical()
Dim i, t, diff As Integer
Dim oEdit As SAPbouiCOM.EditText
diff = 50
For i = 20 To 29
oItem = oForm.Items.Item(i.ToString)
oEdit = oItem.Specific
oEdit.TabOrder = i + diff
Next
End Sub
Private Sub SetTabHorizontal()
Dim i, t, left, right, diff As Integer
Dim oEdit As SAPbouiCOM.EditText
left = 1
right = 2
diff = 100
For i = 20 To 29
oItem = oForm.Items.Item(i.ToString)
oEdit = oItem.Specific
If i < 25 Then
oEdit.TabOrder = left + diff
left = left + 2
Else
oEdit.TabOrder = right + diff
right = right + 2
End If
Next
End Sub
Regards,
Noor -
I am trying to understand how the assignment tab works. In process Def, I have a task, like create user. That has a assignment tab which has one entry in it. It has escalation time and a Default Rule. I entered an escalation time of 10 mins and then proceeded to create another entry below that. However, it says it needs a rule and the Default rule is not applicable since its already used by the first entry.
What rule do I need to create? What should be in that rule? Thanks in advance.See
http://download.oracle.com/docs/cd/E14049_01/doc.9101/e14061/resmgt.htm#BABIHAIJ
You have to create Task Assignment Rule for this. That Task Assigment Tab is used for assigning that task to someone.
Suppose you have approval workflow and you have create Approval Task in that. Then you can assign it to anyone to approve that task.
In Task assignment tab, you select the user or group who will be responsible for completing that task. If you are giving some time duration in Escalation then it will escalate after that particular time but it tales value in ms. -
How to assign a seq while creating a table
Hi,
How to assign a sequence such that i dont want to give the sequence while creation. i mean
if employee table is there
sl_no empname salary .....
i dont want to give sequence while inserting the data, i want to give the sequence at creation of table level for sl_no
i tried this
create table seqtest1 (id number primary key default rajseq.nextval);
but it is showing me the error
ERROR at line 1:
ORA-00907: missing right parenthesis
whats the solution
please help me
Thank you
Raj deep.AHi Raj,
You can not assign a sequence to a column while creating a table. you have two options for this. (So you can also use one sequence for multiple tables)
1. As Gasparotto said, you can create a before insert statement. OR
2. you can assign new sequence number in the program code. for example.
insert into xxx (user_id,name,surname) values (seq_userid.nextval,'Raj','Deep');
Good Luck.
Onur -
How to change the default date in Person assignment tab?
Hi experts,
Does anyone know how to change the default date in person assignment tab in cj20n? Currently, the system always take the scheduled finish date to the date of the person assignment tab. Can I change it to the start date?
Thanks and rgs,
MichelleHi Michelle,
Goto SPRO->Project system->Dates->Scheduling->Specify Parameters for Network Scheduling, Here you can control the workforce planning dates.
Hope this is useful...
Regards
Aatish -
How to keep the WBS & Order in account assignment tab of SD contract item?
Hi Experts,
If I remove the plant from the shipping tab in the contract item (the contract type is WV), I will be able to enter the WBS or Order in accounting assignment tab. However, if I enter the plant (in order to determine the tax in pricing), the WBS and Order are disappered and there is one new settlement rule button showed up.
Do you know any configuration could keep the WBS and order in the accounting assigment tab even the plant is there.
Thanks in advance!
NormanHi Chandra,
Thanks for your answer. However, I even added the plant in the WBS, the tax (we use tax jurisdiction) still could not be determined.
The problem is that SAP changes the account assignment tab screen (it suppresses the WBS and Order fields, but addes settlement rule) with the plant in the shipping tab. Do you know how to keep the same account assignment tab screen with the plant in the shipping tab?
Thanks,
Norman -
How to change company code in Assignment tab (CJ20n-project builder)
Dear All,
Is there any config to maintain company code in assignment tab (project builder) ? We have a problem in our project. It shows that in basic data, user put company code A (in basic data) but in Assignment tab they put different company code let say B. When we do settlement , two accounting document created to company code A and B. By right it should be only company code A. In addition, we cannot change the company code, when the status is already Release (REL).
Please help how to change the company code B to A and how to reverse the accounting document that has been created under these two accounting document.
Thank you.
Best Regards,
niesNow I understand your scenario, you have the Requesting Company Code and the Company Code Different.
You usually use this primarily with IM module if you want to manage the asset under construction (cross company) belonging to a different i.e., company code (Requesting ) than company code on main WBS.
You can not change the company code (Assignment Tab) as you already have actual posted against it.
You've also created an AUC (in wrong company code) and even if you reverse the settlement you would not be allowed to delete the AUC or the delete the settlement rule (its grey out as its already used)
What I can suggest is to reverse the settlement, lock this WBS which was created wrongly, create a new WBS and then continue with you regular process.
Above are my views but you can expect views from others.
Regards
Sreenivas
Please close the post if satisfied. -
How to Grey out cost center column in me22n screen(Account assignment tab)
Hi All,
I have tried many ways to do grey out cost center column in account assignment tab of ME22N.
i have created implementation for this class and method.
Class:CL_TABLE_VIEW_MM_2
Method:PBO_TC_LINE
Below is the my code snippet.Kindly let me know any suggestions.
data: l_tc type char100.
data: l_tabix type i.
l_tc = '(SAPLMEACCTVI)DYN_1000TC-COLS'.
FIELD-SYMBOLS:<fs_tcdata> type any TABLE,
<fs_wa> type any ,
<fs_lwa> type any,
<fs_screen> type any,
<fs_input> type any,
<fs_active> type any,
<fs_output> type any.
*data:fs_wa type SCXTAB_COLUMN_IT.
ASSIGN (l_tc) TO <fs_tcdata>.
LOOP AT <fs_tcdata> ASSIGNING <fs_wa>.
l_tabix = sy-tabix.
ASSIGN COMPONENT 'INVISIBLE' OF STRUCTURE <fs_wa> TO <fs_lwa>.
ASSIGN COMPONENT 'SCREEN-NAME' OF STRUCTURE <fs_wa> TO <fs_screen>.
ASSIGN COMPONENT 'SCREEN-INPUT' OF STRUCTURE <fs_wa> TO <fs_input>.
ASSIGN COMPONENT 'SCREEN-ACTIVE' OF STRUCTURE <fs_wa> TO <fs_active>.
ASSIGN COMPONENT 'SCREEN-OUTPUT' OF STRUCTURE <fs_wa> TO <fs_output>.
IF <fs_lwa> = space.
CASE <fs_screen>.
WHEN 'MEACCT1000-KOSTL'.
<fs_input> = 0.
ENDCASE.
endif.
ENDLOOP.
Regards,
HiriyappaAs I can't see any complicated scenario in your requirement. So I suggest you can achieve this by simple standard configuration.
Go to OME9, double click on the Account assignment category and make the field as Display.
Then check in your PO.
But I doubt, your requirement can not be simple like that.
So either you didn't know the settings or your requirement is different or you are just trying to learn that can it be possible via coding.
Let us know the appropriate reason for set it as display. -
How to enable Account assignment tab in CCM SRM 7.0
Dear SRM Gurus,
We have requirement to activate account assignment tab in Item level of Central Contract management in SRM 7.0
Regards,
VinodHi ,
Check in META configuration field control -> actions -> sub structures
regards,
Devi -
How to create screen sequence and assign to material type
Hi,
How to create new screen sequecnce and how to assign it to material type, is there any link of Industry sector with this.
regards,
zafarhow to assign it to material type and also what is use of industry sector
Industry sector - it simply mean The industry sector groups companies according to activity, for example, plant engineering and construction, mechanical engineering, the chemical industry, and the pharmaceutical industry
Field references are defined in Customizing for the Material Master in the activity Maintain Field Selection for Data Screens.
for see field references run tcode OMs9.
Assign Field references to Material Type by Tcode OmT3E, You can see in OMS2 in General data See Field references and SRef: material type -
How to assign fields in rdf in coldfusion
Hi,
This is chitti iam facing problem in cold fusion with rdf?
How to assign dublincore field to rdf file in xml? iam trying
this is this the correct way or not?
iam posting image with metadata into databaseHi
Go to acessseqence and then select the particular table which u have added or ammended select the table and click feilds tab and after u go in to feilds select each feild and press enter and save do this for evry line in each field and after completing
evry feild save and exit ....ur problem will be solved otherwise
AccessSequence -> select table -> click on fields -> select the field with error and click on field catalog .
From there select the field name manually and save .
and please refer this link..
Access sequence Issue
Hope it will be help-full for you
Thanks.. -
PR Deletion flag set in LIMITs tab but not in Account Assignment tab
Can anyone help with this scenario?
On the "Limits" tab of a PR, user enters multiple accounting lines. This results in table entries in both ESKL and EBKN
Then, one ore more lines in the "Limits" tab get flagged for deletion but the cooresponding lines in the "Account Assignment" tab are not flagged for deletion. As a result, the entries in table ESKL are flagged for deletion but not the cooresponding line sin table EBKN.
Is this normal? How can we fix it if it's not?
Thanks in advance.
JohnRajesh,
So if a single PR line item has 10 entries in ESKL, and subsequently 10 entries in EBKN (Sequence #s 1 - 10)
Then sequence 1 & 2 get flagged for deletion in table ESKL (via the Limits Tab), sequence 1 & 2 will remain un-deleted in EBAN unless the entire line item is flagged for deletion (trash-canned)???
Please confirm.
Thanks, -
Hi Experts,
Can you please let me know how to create tab pages in EP. I have created one page. In this page, I have to place 2 iViews as tab pages. Can you please let me know how I can acheive this?
Regards,Stuart,
Within a SAP Portal Tabs are not used like you want them to
By default Tabs are used inside an iView and not to "tab" between iViews on a page...
The most straightforward solution would be creating a custom PageLayout that you can assign to your page.
I would sugest to implement this custom PageLayout with DIV layers and trigger "tabbing" via JavaScript eventing.
For more infor on how to create a custom PageLayout take a look at here:
[http://help.sap.com/saphelp_nw70/helpdata/en/42/efbac120711a71e10000000a422035/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/42/efbac120711a71e10000000a422035/frameset.htm]
Good Luck,
Benjamin Houttuin
Maybe you are looking for
-
Logout/shutdown hangs half way through repeatedly
When I attempt to logout/restart on my iMac, most of the time all the visible apps close but then the desktop picture doesn't go away and the computer never completes the logout/restart process. I am assuming (perhaps wrongly, since I don't know much
-
IPod not syncing / scrambled by iTunes
For the second time this month, iTunes 10 has decided to freeze/crash while working on my iPod. The first time I was left with an iPod that seemed to still have everything on there, but it was all unaccessible. It claimed there were 0 files on there,
-
How to transmit counter input data of different channels simultaneously?
Hello. I'm using X-series PCIe-6361 DAQ board which have 8 DMA channels and Labview 8.2.1. I upgraded the version of DAQmx as 9.0 which supports the X-series devices and confirmed the board worked normally on my system. I'm trying to measure the puls
-
Help with SQL Query - MIN MAX - CTE?
First and foremost, the SQL is handled dynamically - please ignore some of the crazy coding you see in the WHERE clauses ... its not an issue with the report, trust me. What my client needs is a summary by Facility, by Resource for each specific day
-
Wondering if anyone has any suggestions. Bought a new MB Pro and directed Aperture to the library on an external HD. It opened and looked the same, all the folders in the right places, etc. When I click on a smart folder, nothing comes up and the set