How to assign transaction code to a ABAP program?

Hi,
Need help in assigning transaction code to a ABAP program. Any method that will do the job?

>
sainath raj wrote:
> hi
> within my knowledge
> Any ABAP program can have its own transaction code if and only if it is of type 'MODULE POOL' .
> An EXECUTABLE program cannot have a transaction code.
>
> So try with this .
> 1) Go to the attributes of the program and change the program as type module pool
> 2) then execute transaction SE93.
> 3) give the appropriate program name and assign a transaction code as ur wish.
Well Sainath,
What u said is not correct, an executable report can have a transaction code, difference between module pool and executable program is that u neccesarily need to have a tcode for module pool but that doesn't mean that only module pool can have tcode.
And secondly u should not answer these kind of simple questions, as people then continue posting simple questions without making an effort to serach for themselves.
кu03B1ятu03B9к.

Similar Messages

How to assign transaction code to report group.

hi experts,
i used report painter to create some reports and assign these reports to a report group, i want to assign a transaction code to the report group, how can i do that? hunger for your adivces, thanks a lot!!

Hi Liu,
when you change an area menu, you can add transactions that launch ABAP/4 reports, Query lists or report writer's. You can use it for your purpose:
1. Enter transaction SE43 and change a Z* area menu (no matter which one, you will not change it in the end)
2. Click on "Add entry as subnode" or "Add entry at the same level" (no matter which one of them)
3. When SAP shows the popup "Add new entries", click on "Add report"
4. On the next popup, click on radio-button "Report Writer". Then you will be asked foe the code of the report group.
5. Then save, and... that's it! SAP will automatically create a transaction for the report group
6. Now you can cancel the changing of the area menu
I hope this helps. Best regards,
Alvaro

Can we assign Transaction code to created ABAP Query of SQ01

Hi ,
Friends I want to run the abap query assigning t.code to it .. i will be thankfull if any body give me the steps or remedy .
thanks

Hi you there.... you can try this
1) create an abap report with the following source code
REPORT ZRUN_QUERY .
 DECLARACIÓNES *
DATA:
REPORTNAME LIKE AQADEF-PGNAME.
PANTALLA DE SELECCION *
SELECTION-SCREEN BEGIN OF BLOCK B0 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
PARAMETERS: P_BGNAME LIKE AQADEF-BGNAME OBLIGATORY,
 P_QUNAME LIKE AQADEF-QUNAME OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN END OF BLOCK B0.
CUERPO DEL PROGRAMA *
CALL FUNCTION 'RSAQ_REPORT_NAME'
 EXPORTING
 WORKSPACE = SPACE
 USERGROUP = P_BGNAME
 QUERY = P_QUNAME
 IMPORTING
 REPORTNAME = REPORTNAME.
CALL FUNCTION 'RSAQ_SUBMIT_QUERY_REPORT'
 EXPORTING
 QUERYREPORT = REPORTNAME
 VARIANTE = SPACE
 EXCEPTIONS
 ONLY_WITH_VARIANT = 1
 VARIANT_NOT_EXIST = 2
 OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
2) Create a transaction for this program
3) Create a parameter transaction and execute this report passing by parameter the usergroup and Query, then, the program will automatically solve the program name and execute it.
Regards,
Daniel

How to assign Transaction code for report program?

All,
I have developed a custom report. I want to associate it to a transaction code. How to do it?

Hi,
Please follow the steps for creating a transaction for report..
GOTO SE93
Give the transaction code.
Press create button..
Enter the short description..
Choose the radio button which says "Program and selection screen(report transaction)".
Press Enter..
Give the program name..
Remove the Selection screen "1000" if you want.
Save the transaction code..
Regards

How to create Transaction code for ABAP and execution by other user

Hi All,
Could someone please let me know how to create transaction code in detail for ABAP program. Step by step procedure expected. I would like to know how other user can execute the report using same transaction code which I have created.
More about authorization.
Thanks in advance.

Hello,
You can create transaction code from se80 as well.In object navigator,right click on your program name and create->transaction code.You can create transaction and select if it is only a report,a report with selection-screen depending on your requirement.You can run your report directly by entering the transaction code in the command field.
You can authorise the users who can use your transaction:
Authorisation objects are used to restrict certain transactions to users.Critical data must be protected from unauthorised users.For example,the head has access to certain data.But it cannot be accessed by his subordinate.For this we need to define roles.
Create an authorization object with transaction SU21.
An object usually consists of the ACTVT (activity) field and one other field,which specifies the data type to be protected.By ACTVT, we can decide if the data is accessible for change,display only etc.
Add authorization fields to the authorization object created.
Assign the authorization object to the transaction using SE93.
Attach the authorization object to the role using transaction PFCG.
If you want to assign roles,use transaction PFCG.Create a new role.In the AUTHORIZATIONS tab,you can get a self generated profile name and a profile text by clicking on the icon next to it.Then go to the "Change Authorization data" and choose an authorization template.Then you can choose to display/change/create an activity and after the selection,click on the red and white circle.The profile will now be created.
In the user tab,you can give the user details who can use this role.
Also check this link:
http://www.*********************/r3_security/r3_security_tips.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/52/6716a6439b11d1896f0000e8322d00/content.htm
Very helpful guide:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a92195a9-0b01-0010-909c-f330ea4a585c
Regards,
Beejal
**Reward if answer is helpful

How to create transaction code for maintenance view

hai friends,
i hope every thing goes good.
i have doubt, how to create transaction code for maintenance view. I created view for tranperant table and now i want to create transaction code for the view.
i tried and i donot know the screen number and program name and where can i give the view name.
if any one know please post in details.
thanks in advance.

Hi Elam,
You need to create a "Parameter Transaction".
What this means is that you will have a transaction (let's call it "ZMAINT") which calls "SM30" and passes in your table name.
Go to transaction SE93 and enter your new transaction code. Enter in the Tcode description and choose "Transaction with Parameters" (it shouldbe the last radio button).
Enter in the default transaction "SM30" and tick the "Skip Initial Screen" check box. Hit Enter.
Now scroll to the bottom of the screen and you will see a Table Control where you will need to enter in the values to the SM30 selection screen.
Because you hit ENTER, the program will have loaded in the Selection Screen parameters into it's memory. Hit the drop down for "Name of Screen Field" and select "VIEWNAME" and then enter in your Z Table in the "Value" column.
Now go to the next line and hit the drop down and select "UPDATE" in the "Name of Screen Field". Enter in a "X" in the value column.
Now save the transaction and there you have it.
Hope this helps.
Cheers,
Pat.
PS. Kindly assign Reward Points to the posts you find helpful.

Reg calling Transaction code in Webdynpro ABAP

Hi All,
Can I call Transaction code in Webdynpro ABAP Portal Application. If so, how can this be possible? Can anybody give me a lead?
Thanks.
Kumar Saurav.

Hi,
The most easy Way is here:
1) Test any Webdynpro Application from SE80 when the webdynpro Browser opens to display output
Copy its HTTP link, Suppose we get the below link
http://r3d01web1.Siemens.dk:8001/sap/bc/webdynpro/sap/z_dynamic_view?sap-client=002&sap-language=EN
2) Now replace some part of the above link ( webdynpro/sap/z_dynamic_view?sap-client=002&sap-language=EN ) with the new link part ( gui/sap/its/webgui?~transaction=PA30 )
So that the newly generated link is such that the below one:
http://r3d01web1.Siemens.dk:8001/sap/bc/gui/sap/its/webgui?~transaction=PA30
Note in place of PA30 you can put any of your desired tcode.
3) Now Just Make a webdynpro component and in its View layout put a LINK TO URL ui element
and in its property REFERENCE just past the http link ( http://r3d01web1.Siemens.dk:8001/sap/bc/gui/sap/its/webgui?~transaction=PA30 )
4) Activate and test your webdynpro Application.

How to find Transaction code from Report/program name ?

Dear all,
How to find Transaction code if i know Report/program name ?

Hi,
In se 38 when u open ur program,in the application toolbar u have a button beside the where-used list button as display object list.on clicking this button,a window will be opened at the left most corner for repository browser,in this u can find any tranasctions,fileds,screens,dictionary structures defined for the program.
if any transaction is created for the program u can find it under the transaction folder.
revert back for further queries.
Regards,
Sravanthi

How to create transaction code for a Z-table

How to create transaction code for a Z-table?
Se93 --> then which radio button to be selected? and what is the program nam e to be given

Hi Sam,
Procedure to create a TCODE for ZTABLE:
Create a table maintainance/View for the Z* Table.
Once you create the view goto SE93>Select Parameter transaction and give the short desc.>
Give the transaction as SM30(Skip the first screen-optional)>Check all check boxes under GUI support>In the default values(grid)section first row give the VIEWNAME as you created initially and the second row UPDATE as X.
Se93 --> then which radio button to be selected
Select the parameter transaction as a radio button.
what is the program nam e to be given
no need to give any program name. Instead you have to give the transaction code name as SM30.
Pls mark the helpful answers.
Thanks
Eswar

How to use Java code inside WebDynpro-ABAP

Hi,
How to use Java code inside WebDynpro-ABAP.
Could any one provide sample code.
Cheers,
Sam

Hi Sam,
We can't Bring Java Inside the ABAP. Both are running in different Environments.
and also ABAP Codes are runs on BASIS.
-Basis is a middleware between ABAP codes and Ur OS.
-Contains set of programs to load,RUN,intepret the ABAP program..
So Both are Different.
Regards,
Ramganesan K.

How can i get access code to create ABAP Program ?

hi guys ,
How can i get access code for creating ABAP Program in my System.
I am using SAP IDES 4.6 Version
Please Help me out .
Regards
Raghu

Hi Raghu,
- license your system (http://service.sap.com/licensekey)
- create a developer key (http://service.sap.com/sscr)
- create a key for your ABAP program (httP://service.sap.com/sscr)
Markus

How to improve the performance of the abap program

hi all,
I have created an abap program. And it taking long time since the number of records are more. And can anyone let me know how to improve the performance of my abap program.
Using se30 and st05 transaction.
can anyone help me out step by step
regds
haritha

Hi Haritha,
->Run Any program using SE30 (performance analysis)
Note: Click on the Tips & Tricks button from SE30 to get performance improving tips.
Using this you can improve the performance by analyzing your code part by part.
->To turn runtim analysis on within ABAP code insert the following code
SET RUN TIME ANALYZER ON.
->To turn runtim analysis off within ABAP code insert the following code
SET RUN TIME ANALYZER OFF.
->Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
->Avoid for all entries in JOINS
->Try to avoid joins and use FOR ALL ENTRIES.
->Try to restrict the joins to 1 level only ie only for tables
->Avoid using Select *.
->Avoid having multiple Selects from the same table in the same object.
->Try to minimize the number of variables to save memory.
->The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
->Avoid creation of index as far as possible
->Avoid operators like <>, > , < & like % in where clause conditions
->Avoid select/select single statements in loops.
->Try to use 'binary search' in READ internal table. -->Ensure table is sorted before using BINARY SEARCH.
->Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
->Avoid using ORDER BY in selects
->Avoid Nested Selects
->Avoid Nested Loops of Internal Tables
->Try to use FIELD SYMBOLS.
->Try to avoid into Corresponding Fields of
->Avoid using Select Distinct, Use DELETE ADJACENT
Check the following Links
Re: performance tuning
Re: Performance tuning of program
http://www.sapgenie.com/abap/performance.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
check the below link
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
See the following link if it's any help:
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Check also http://service.sap.com/performance
and
books like
http://www.sap-press.com/product.cfm?account=&product=H951
http://www.sap-press.com/product.cfm?account=&product=H973
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Performance tuning for Data Selection Statement
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
Debugger
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
Run Time Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617cafe68c11d2b2ab080009b43351/content.htm
SQL trace
http://help.sap.com/saphelp_47x200/helpdata/en/d1/801f7c454211d189710000e8322d00/content.htm
CATT - Computer Aided Testing Too
http://help.sap.com/saphelp_47x200/helpdata/en/b3/410b37233f7c6fe10000009b38f936/frameset.htm
Test Workbench
http://help.sap.com/saphelp_47x200/helpdata/en/a8/157235d0fa8742e10000009b38f889/frameset.htm
Coverage Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c7/af9a79061a11d4b3d4080009b43351/content.htm
Runtime Monitor
http://help.sap.com/saphelp_47x200/helpdata/en/b5/fa121cc15911d5993d00508b6b8b11/content.htm
Memory Inspector
http://help.sap.com/saphelp_47x200/helpdata/en/a2/e5fc84cc87964cb2c29f584152d74e/content.htm
ECATT - Extended Computer Aided testing tool.
http://help.sap.com/saphelp_47x200/helpdata/en/20/e81c3b84e65e7be10000000a11402f/frameset.htm
Just refer to these links...
performance
Performance
Performance Guide
performance issues...
Performance Tuning
Performance issues
performance tuning
performance tuning
You can go to the transaction SE30 to have the runtime analysis of your program.Also try the transaction SCI , which is SAP Code Inspector.
edited by,
Naveenan

Calling a transaction code in between the program and use the output

Hi frnds,
i want to call a transaction code in between the program and pass the input .After getting the output, use that output in the program

Hi Navin,
Why don't you sit with ABAPer he can explain better.
Regards,
HAri.

How to avoid time out error in abap program

How to avoid time out error in abap program
based on performance wise i want please help

Timeout occurs when a statement exceeds its time limit.To avoid this we need to tune the statements.
I can give give you few tips for tune a select stament.
1.The order of the feilds in the select statement should be same as the order of fields in the database table.
2.It is always advisible to use the key fields when you are using the where clause.
3. Sort the internal table while using the for all entreis statements.
4.Use index in where clause if necessary.
5.When you have a read statement user binary search but before this a sort statement should be there.
6. Check your program with the Tcode ST05 and check which statement takes much time based on that tune that.

How to translate the key words in ABAp program from lower case to upper cas

How to translate the key words in ABAp program from lower case to upper case?

Hi Kittu,
You need to set the Pretty Printer settings to achieve key words in ABAP program from lower case to upper case.
Utilities -> Settings -> Pretty Printer (tab) -> Select third radio button.
Thats all.
Reward points if this helps.
Manish

How to assign transaction code to a ABAP program?

Similar Messages

Maybe you are looking for